mbox series

[v2,00/10] Improvments for tc358775 with support for tc358765

Message ID 20231202075514.44474-1-tony@atomide.com (mailing list archive)
Headers show
Series Improvments for tc358775 with support for tc358765 | expand

Message

Tony Lindgren Dec. 2, 2023, 7:54 a.m. UTC
Here's v2 of these changes merged with patches from Michael.

Regards,

Tony

Changes since v1:

- After a brief offline discussion with Michael, merge series with
  Michael's patch series to make stby gpio and supplies optional as they
  may be hardwired

- Use Michael's better patch for the jeida timings change

- Parse lanes on the bridge side like other bridge devices do, and if not
  found, also parse on the DSI host side and warn

Michael Walle (3):
  dt-bindings: display: bridge: tc358775: make stby gpio and vdd
    supplies optional
  drm/bridge: tc358775: fix support for jeida-18 and jeida-24
  drm/bridge: tc358775: make standby GPIO optional

Tony Lindgren (7):
  dt-bindings: display: bridge: tc358775: Add data-lanes
  dt-bindings: display: bridge: tc358775: Add support for tc358765
  drm/bridge: tc358775: Get bridge data lanes instead of the DSI host
    lanes
  drm/bridge: tc358775: Add burst and low-power modes
  drm/bridge: tc358775: Enable pre_enable_prev_first flag
  drm/bridge: tc358775: Add support for tc358765
  drm/bridge: tc358775: Configure hs_rate and lp_rate

 .../display/bridge/toshiba,tc358775.yaml      | 30 +++++--
 drivers/gpu/drm/bridge/tc358775.c             | 90 +++++++++++--------
 2 files changed, 75 insertions(+), 45 deletions(-)