mbox series

[v2,0/2] drm/solomon: Add support for the SSD133x controller family

Message ID 20231218132045.2066576-1-javierm@redhat.com (mailing list archive)
Headers show
Series drm/solomon: Add support for the SSD133x controller family | expand

Message

Javier Martinez Canillas Dec. 18, 2023, 1:20 p.m. UTC 
Hello,

This patch-set adds support for the family of SSD133x Solomon controllers,
such as the SSD1331. These are used for RGB Dot Matrix OLED/PLED panels.

This is a v2 that addresses issues pointed out in v1:

https://lore.kernel.org/lkml/20231217100741.1943932-2-javierm@redhat.com/T/

The patches were tested on a Waveshare SSD1331 display using glmark2-drm,
fbcon, fbtests and the retroarch emulator.

Patch #1 adds a DT binding schema for the SSD133x controllers and patch #2
extends the ssd130x DRM driver to support the SSD133x controller family.

Best regards,
Javier

Changes in v2:
- Unconditionally set the width and height constraints (Conor Dooley).
- Fix indentation in the DTS examples (Krzysztof Kozlowski).

Javier Martinez Canillas (2):
  dt-bindings: display: Add SSD133x OLED controllers
  drm/ssd130x: Add support for the SSD133x OLED controller family

 .../bindings/display/solomon,ssd133x.yaml     |  57 +++
 drivers/gpu/drm/solomon/ssd130x-i2c.c         |   5 +
 drivers/gpu/drm/solomon/ssd130x-spi.c         |   7 +
 drivers/gpu/drm/solomon/ssd130x.c             | 370 ++++++++++++++++++
 drivers/gpu/drm/solomon/ssd130x.h             |   5 +-
 5 files changed, 443 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd133x.yaml