mbox series

[v3,0/9] drm/vkms: Reimplement line-per-line pixel conversion for plane reading

Message ID 20240226-yuv-v3-0-ff662f0994db@bootlin.com (mailing list archive)
Headers show
Series drm/vkms: Reimplement line-per-line pixel conversion for plane reading | expand

Message

Louis Chauvet Feb. 26, 2024, 8:46 a.m. UTC
This patchset is the second version of [1]. It is almost a complete 
rewrite to use a line-by-line algorithm for the composition.
It can be divided in three parts:
- PATCH 1 to 4: no functional change is intended, only some formatting and 
documenting
(PATCH 2 is taken from [2])
- PATCH 5: main patch for this series, it reintroduce the 
line-by-line algorithm
- PATCH 6 to 9: taken from Arthur's series [2], with sometimes adaptation 
to use the pixel-by-pixel algorithm.

The PATCH 5 aims to restore the line-by-line pixel reading algorithm. It 
was introduced in 8ba1648567e2 ("drm: vkms: Refactor the plane composer to 
accept new formats") but removed in 8ba1648567e2 ("drm: vkms: Refactor the 
plane composer to accept new formats") in a over-simplification effort. 
At this time, nobody noticed the performance impact of this commit. After 
the first iteration of my series, poeple notice performance impact, and it 
was the case. Pekka suggested to reimplement the line-by-line algorithm.

Expiriments on my side shown great improvement for the line-by-line 
algorithm, and the performances are the same as the original line-by-line 
algorithm. I targeted my effort to make the code working for all the 
rotations and translations. The usage of helpers from drm_rect_* avoid 
reimplementing existing logic.

The only "complex" part remaining is the clipping of the coordinate to 
avoid reading/writing outside of src/dst. Thus I added a lot of comments 
to help when someone will want to add some features (framebuffer resizing 
for example).

The YUV part is not mandatory for this series, but as my first effort was 
to help the integration of YUV, I decided to rebase Arthur's series on 
mine to help. I took [3], [4], [5] and [6] and adapted them to use the 
line-by-line reading. If I did something wrong here, please let me 
know.

My series was mainly tested with:
- kms_plane (for color conversions)
- kms_rotation_crc (for rotations of planes)
- kms_cursor_crc (for translations)
The benchmark used to measure the improvment was done with:
- kms_fb_stress

[1]: https://lore.kernel.org/r/20240201-yuv-v1-0-3ca376f27632@bootlin.com
[2]: https://lore.kernel.org/all/20240110-vkms-yuv-v2-0-952fcaa5a193@riseup.net/
[3]: https://lore.kernel.org/all/20240110-vkms-yuv-v2-3-952fcaa5a193@riseup.net/
[4]: https://lore.kernel.org/all/20240110-vkms-yuv-v2-5-952fcaa5a193@riseup.net/
[5]: https://lore.kernel.org/all/20240110-vkms-yuv-v2-6-952fcaa5a193@riseup.net/
[6]: https://lore.kernel.org/all/20240110-vkms-yuv-v2-7-952fcaa5a193@riseup.net/

To: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
To: Melissa Wen <melissa.srw@gmail.com>
To: MaĆ­ra Canal <mairacanal@riseup.net>
To: Haneen Mohammed <hamohammed.sa@gmail.com>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: David Airlie <airlied@gmail.com>
To: arthurgrillo@riseup.net
To: Jonathan Corbet <corbet@lwn.net>
To: pekka.paalanen@haloniitty.fi
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: jeremie.dautheribes@bootlin.com
Cc: miquel.raynal@bootlin.com
Cc: thomas.petazzoni@bootlin.com
Cc: seanpaul@google.com
Cc: marcheu@google.com
Cc: nicolejadeyee@google.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>

Note: after my changes, those tests seems to pass, so [7] may need 
updating (I did not check, it was maybe already the case):
- kms_cursor_legacy@flip-vs-cursor-atomic
- kms_pipe_crc_basic@nonblocking-crc
- kms_pipe_crc_basic@nonblocking-crc-frame-sequence
- kms_writeback@writeback-pixel-formats
- kms_writeback@writeback-invalid-parameters
- kms_flip@flip-vs-absolute-wf_vblank-interruptible
And those tests pass, I did not investigate why the runners fails:
- kms_flip@flip-vs-expired-vblank-interruptible
- kms_flip@flip-vs-expired-vblank
- kms_flip@plain-flip-fb-recreate
- kms_flip@plain-flip-fb-recreate-interruptible
- kms_flip@plain-flip-ts-check-interruptible
- kms_cursor_legacy@cursorA-vs-flipA-toggle
- kms_pipe_crc_basic@nonblocking-crc
- kms_prop_blob@invalid-get-prop
- kms_flip@flip-vs-absolute-wf_vblank-interruptible
- kms_invalid_mode@zero-hdisplay
- kms_invalid_mode@bad-vtotal
- kms_cursor_crc.* (everything is SUCCEED or SKIP, but no fails)

[7]: https://lore.kernel.org/all/20240201065346.801038-1-vignesh.raman@collabora.com/

Changes in v3:
- Correction of remaining git-rebase artefacts
- Added Pekka in copy of this patch
- Link to v2: https://lore.kernel.org/r/20240223-yuv-v2-0-aa6be2827bb7@bootlin.com
Changes in v2:
- Rebased the series on top of drm-misc/drm-misc-net
- Extract the typedef for pixel_read/pixel_write
- Introduce the line-by-line algorithm per pixel format
- Add some documentation for existing and new code
- Port the series [1] to use line-by-line algorithm
- Link to v1: https://lore.kernel.org/r/20240201-yuv-v1-0-3ca376f27632@bootlin.com

---
Arthur Grillo (5):
      drm/vkms: Use drm_frame directly
      drm/vkms: Add YUV support
      drm/vkms: Add range and encoding properties to pixel_read function
      drm/vkms: Drop YUV formats TODO
      drm/vkms: Create KUnit tests for YUV conversions

Louis Chauvet (4):
      drm/vkms: Code formatting
      drm/vkms: write/update the documentation for pixel conversion and pixel write functions
      drm/vkms: Add typedef and documentation for pixel_read and pixel_write functions
      drm/vkms: Re-introduce line-per-line composition algorithm

 Documentation/gpu/vkms.rst                    |   3 +-
 drivers/gpu/drm/vkms/Makefile                 |   1 +
 drivers/gpu/drm/vkms/tests/.kunitconfig       |   4 +
 drivers/gpu/drm/vkms/tests/Makefile           |   3 +
 drivers/gpu/drm/vkms/tests/vkms_format_test.c | 155 +++++++
 drivers/gpu/drm/vkms/vkms_composer.c          | 233 ++++++++---
 drivers/gpu/drm/vkms/vkms_crtc.c              |   6 +-
 drivers/gpu/drm/vkms/vkms_drv.c               |   3 +-
 drivers/gpu/drm/vkms/vkms_drv.h               |  55 ++-
 drivers/gpu/drm/vkms/vkms_formats.c           | 565 +++++++++++++++++++++-----
 drivers/gpu/drm/vkms/vkms_formats.h           |  13 +-
 drivers/gpu/drm/vkms/vkms_plane.c             |  50 ++-
 drivers/gpu/drm/vkms/vkms_writeback.c         |  14 +-
 13 files changed, 915 insertions(+), 190 deletions(-)
---
base-commit: c079e2e113f2ec2803ba859bbb442a6ab82c96bd
change-id: 20240201-yuv-1337d90d9576

Best regards,

Comments

Pekka Paalanen Feb. 26, 2024, 12:29 p.m. UTC | #1
On Mon, 26 Feb 2024 09:46:30 +0100
Louis Chauvet <louis.chauvet@bootlin.com> wrote:

> This patchset is the second version of [1]. It is almost a complete 
> rewrite to use a line-by-line algorithm for the composition.
> It can be divided in three parts:
> - PATCH 1 to 4: no functional change is intended, only some formatting and 
> documenting
> (PATCH 2 is taken from [2])
> - PATCH 5: main patch for this series, it reintroduce the 
> line-by-line algorithm
> - PATCH 6 to 9: taken from Arthur's series [2], with sometimes adaptation 
> to use the pixel-by-pixel algorithm.

Hi Louis,

I'll skip v3 because I was still reviewing v2 while you posted this.
I'm done on v2 now.


Thanks,
pq