Message ID | 20250402-wip-obbardc-qcom-t14s-oled-panel-v5-0-ff33f4d0020f@linaro.org (mailing list archive) |
---|---|
Headers | show |
Series | Add support for OLED panel used on Snapdragon Lenovo T14s Gen6 | expand |
On Wed, 02 Apr 2025 15:36:31 +0100, Christopher Obbard wrote: > The Snapdragon Lenovo T14s Gen6 can be bought with a number of different > panels. This patch series adds support for the OLED model which has a > Samsung ATNA40YK20 panel. > > With this patch series the backlight of the OLED eDP panel does not > illuminate since the brightness is incorrectly read from the eDP panel > as (to be clear this is not a regression). This is fixed in [0]. > > [0]: https://lore.kernel.org/all/20250330-wip-obbardc-qcom-t14s-oled-panel-brightness-v6-1-84ad1cd1078a@linaro.org/ > > Signed-off-by: Christopher Obbard <christopher.obbard@linaro.org> > --- > Changes in v5: > - Move edp_hpd_active from T14s DTS into SoC DTSI (Dmitry). > - Link to v4: https://lore.kernel.org/r/20250402-wip-obbardc-qcom-t14s-oled-panel-v4-0-41ba3f3739d0@linaro.org > > Changes in v4: > - Rework HPD GPIO into eDP device rather than panel (Johan). > - Drop review tags for HPD GPIO patch. > - Link to v3: https://lore.kernel.org/r/20250327-wip-obbardc-qcom-t14s-oled-panel-v3-0-45d5f2747398@linaro.org > > Changes in v3: > - Added review trailers from v2. > - Dropped dt-binding documentation patch (applied by Douglas Anderson into > drm-misc-next). > - Dropped eDP maximum brightness patch (will be sent in separate > series). > - Removed duplicate nodes in T14s OLED device tree. > - Reworked WIP comments from commit messages. > - Link to v2: https://lore.kernel.org/r/20250325-wip-obbardc-qcom-t14s-oled-panel-v2-0-e9bc7c9d30cc@linaro.org > > Changes in v2: > - Use the existing atna33xc20 driver rather than panel-edp. > - Add eDP panel into OLED devicetree. > - Add patch to read the correct maximum brightness from the eDP panel. > - Link to v1: https://lore.kernel.org/r/20250320-wip-obbardc-qcom-t14s-oled-panel-v1-1-05bc4bdcd82a@linaro.org > > --- > Christopher Obbard (3): > arm64: dts: qcom: x1e80100: add epd hpd pinctrl > arm64: dts: qcom: x1e78100-t14s: add hpd gpio to dp controller > arm64: dts: qcom: x1e78100-t14s-oled: add edp panel > > arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts | 8 ++++++++ > arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi | 3 +++ > arch/arm64/boot/dts/qcom/x1e80100.dtsi | 5 +++++ > 3 files changed, 16 insertions(+) > --- > base-commit: b6ae34803e82511009e2b78dc4fd154330ecdc2d > change-id: 20250320-wip-obbardc-qcom-t14s-oled-panel-b74fed21d600 > > Best regards, > -- > Christopher Obbard <christopher.obbard@linaro.org> > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade This patch series was applied (using b4) to base: Base: using specified base-commit b6ae34803e82511009e2b78dc4fd154330ecdc2d If this is not the correct base, please add 'base-commit' tag (or use b4 which does this automatically) New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250402-wip-obbardc-qcom-t14s-oled-panel-v5-0-ff33f4d0020f@linaro.org: arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dtb: panel: compatible: 'oneOf' conditional failed, one must be fixed: ['samsung,atna40yk20', 'samsung,atna33xc20'] is too long 'samsung,atna33xc20' was expected 'samsung,atna40yk20' is not one of ['samsung,atna45af01', 'samsung,atna45dc02', 'samsung,atna56ac03'] from schema $id: http://devicetree.org/schemas/display/panel/samsung,atna33xc20.yaml# arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dtb: /soc@0/display-subsystem@ae00000/displayport-controller@aea0000/aux-bus/panel: failed to match any schema with compatible: ['samsung,atna40yk20', 'samsung,atna33xc20'] arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dtb: pinctrl@f100000: edp-hpd-active-state: 'oneOf' conditional failed, one must be fixed: 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'edp_hot' is not one of ['aon_cci', 'aoss_cti', 'atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'atest_usb', 'audio_ext', 'audio_ref', 'cam_aon', 'cam_mclk', 'cci_async', 'cci_i2c', 'cci_timer0', 'cci_timer1', 'cci_timer2', 'cci_timer3', 'cci_timer4', 'cmu_rng0', 'cmu_rng1', 'cmu_rng2', 'cmu_rng3', 'cri_trng', 'dbg_out', 'ddr_bist', 'ddr_pxi0', 'ddr_pxi1', 'ddr_pxi2', 'ddr_pxi3', 'ddr_pxi4', 'ddr_pxi5', 'ddr_pxi6', 'ddr_pxi7', 'edp0_hot', 'edp0_lcd', 'edp1_hot', 'edp1_lcd', 'eusb0_ac', 'eusb1_ac', 'eusb2_ac', 'eusb3_ac', 'eusb5_ac', 'eusb6_ac', 'gcc_gp1', 'gcc_gp2', 'gcc_gp3', 'gpio', 'i2s0_data0', 'i2s0_data1', 'i2s0_sck', 'i2s0_ws', 'i2s1_data0', 'i2s1_data1', 'i2s1_sck', 'i2s1_ws', 'ibi_i3c', 'jitter_bist', 'mdp_vsync0', 'mdp_vsync1', 'mdp_vsync2', 'mdp_vsync3', 'mdp_vsync4', 'mdp_vsync5', 'mdp_vsync6', 'mdp_vsync7', 'mdp_vsync8', 'pcie3_clk', 'pcie4_clk', 'pcie5_clk', 'pcie6a_clk', 'pcie6b_clk', 'phase_flag', 'pll_bist', 'pll_clk', 'prng_rosc0', 'prng_r osc1', 'prng_rosc2', 'prng_rosc3', 'qdss_cti', 'qdss_gpio', 'qspi00', 'qspi01', 'qspi02', 'qspi03', 'qspi0_clk', 'qspi0_cs0', 'qspi0_cs1', 'qup0_se0', 'qup0_se1', 'qup0_se2', 'qup0_se3', 'qup0_se4', 'qup0_se5', 'qup0_se6', 'qup0_se7', 'qup1_se0', 'qup1_se1', 'qup1_se2', 'qup1_se3', 'qup1_se4', 'qup1_se5', 'qup1_se6', 'qup1_se7', 'qup2_se0', 'qup2_se1', 'qup2_se2', 'qup2_se3', 'qup2_se4', 'qup2_se5', 'qup2_se6', 'qup2_se7', 'sd_write', 'sdc4_clk', 'sdc4_cmd', 'sdc4_data0', 'sdc4_data1', 'sdc4_data2', 'sdc4_data3', 'sys_throttle', 'tb_trig', 'tgu_ch0', 'tgu_ch1', 'tgu_ch2', 'tgu_ch3', 'tgu_ch4', 'tgu_ch5', 'tgu_ch6', 'tgu_ch7', 'tmess_prng0', 'tmess_prng1', 'tmess_prng2', 'tmess_prng3', 'tsense_pwm1', 'tsense_pwm2', 'sense_pwm3', 'tsense_pwm4', 'usb0_dp', 'usb0_phy', 'usb0_sbrx', 'usb0_sbtx', 'usb1_dp', 'usb1_phy', 'usb1_sbrx', 'usb1_sbtx', 'usb2_dp', 'usb2_phy', 'usb2_sbrx', 'usb2_sbtx', 'vsense_trigger'] from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dtb: pinctrl@f100000: edp-hpd-active-state: 'oneOf' conditional failed, one must be fixed: 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'edp_hot' is not one of ['aon_cci', 'aoss_cti', 'atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'atest_usb', 'audio_ext', 'audio_ref', 'cam_aon', 'cam_mclk', 'cci_async', 'cci_i2c', 'cci_timer0', 'cci_timer1', 'cci_timer2', 'cci_timer3', 'cci_timer4', 'cmu_rng0', 'cmu_rng1', 'cmu_rng2', 'cmu_rng3', 'cri_trng', 'dbg_out', 'ddr_bist', 'ddr_pxi0', 'ddr_pxi1', 'ddr_pxi2', 'ddr_pxi3', 'ddr_pxi4', 'ddr_pxi5', 'ddr_pxi6', 'ddr_pxi7', 'edp0_hot', 'edp0_lcd', 'edp1_hot', 'edp1_lcd', 'eusb0_ac', 'eusb1_ac', 'eusb2_ac', 'eusb3_ac', 'eusb5_ac', 'eusb6_ac', 'gcc_gp1', 'gcc_gp2', 'gcc_gp3', 'gpio', 'i2s0_data0', 'i2s0_data1', 'i2s0_sck', 'i2s0_ws', 'i2s1_data0', 'i2s1_data1', 'i2s1_sck', 'i2s1_ws', 'ibi_i3c', 'jitter_bist', 'mdp_vsync0', 'mdp_vsync1', 'mdp_vsync2', 'mdp_vsync3', 'mdp_vsync4', 'mdp_vsync5', 'mdp_vsync6', 'mdp_vsync7', 'mdp_vsync8', 'pcie3_clk', 'pcie4_clk', 'pcie5_clk', 'pcie6a_clk', 'pcie6b_clk', 'phase_flag', 'pll_bist', 'pll_clk', 'prng_rosc0', 'prng_r osc1', 'prng_rosc2', 'prng_rosc3', 'qdss_cti', 'qdss_gpio', 'qspi00', 'qspi01', 'qspi02', 'qspi03', 'qspi0_clk', 'qspi0_cs0', 'qspi0_cs1', 'qup0_se0', 'qup0_se1', 'qup0_se2', 'qup0_se3', 'qup0_se4', 'qup0_se5', 'qup0_se6', 'qup0_se7', 'qup1_se0', 'qup1_se1', 'qup1_se2', 'qup1_se3', 'qup1_se4', 'qup1_se5', 'qup1_se6', 'qup1_se7', 'qup2_se0', 'qup2_se1', 'qup2_se2', 'qup2_se3', 'qup2_se4', 'qup2_se5', 'qup2_se6', 'qup2_se7', 'sd_write', 'sdc4_clk', 'sdc4_cmd', 'sdc4_data0', 'sdc4_data1', 'sdc4_data2', 'sdc4_data3', 'sys_throttle', 'tb_trig', 'tgu_ch0', 'tgu_ch1', 'tgu_ch2', 'tgu_ch3', 'tgu_ch4', 'tgu_ch5', 'tgu_ch6', 'tgu_ch7', 'tmess_prng0', 'tmess_prng1', 'tmess_prng2', 'tmess_prng3', 'tsense_pwm1', 'tsense_pwm2', 'sense_pwm3', 'tsense_pwm4', 'usb0_dp', 'usb0_phy', 'usb0_sbrx', 'usb0_sbtx', 'usb1_dp', 'usb1_phy', 'usb1_sbrx', 'usb1_sbtx', 'usb2_dp', 'usb2_phy', 'usb2_sbrx', 'usb2_sbtx', 'vsense_trigger'] from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dtb: pinctrl@f100000: edp-hpd-active-state: 'oneOf' conditional failed, one must be fixed: 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'edp_hot' is not one of ['aon_cci', 'aoss_cti', 'atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'atest_usb', 'audio_ext', 'audio_ref', 'cam_aon', 'cam_mclk', 'cci_async', 'cci_i2c', 'cci_timer0', 'cci_timer1', 'cci_timer2', 'cci_timer3', 'cci_timer4', 'cmu_rng0', 'cmu_rng1', 'cmu_rng2', 'cmu_rng3', 'cri_trng', 'dbg_out', 'ddr_bist', 'ddr_pxi0', 'ddr_pxi1', 'ddr_pxi2', 'ddr_pxi3', 'ddr_pxi4', 'ddr_pxi5', 'ddr_pxi6', 'ddr_pxi7', 'edp0_hot', 'edp0_lcd', 'edp1_hot', 'edp1_lcd', 'eusb0_ac', 'eusb1_ac', 'eusb2_ac', 'eusb3_ac', 'eusb5_ac', 'eusb6_ac', 'gcc_gp1', 'gcc_gp2', 'gcc_gp3', 'gpio', 'i2s0_data0', 'i2s0_data1', 'i2s0_sck', 'i2s0_ws', 'i2s1_data0', 'i2s1_data1', 'i2s1_sck', 'i2s1_ws', 'ibi_i3c', 'jitter_bist', 'mdp_vsync0', 'mdp_vsync1', 'mdp_vsync2', 'mdp_vsync3', 'mdp_vsync4', 'mdp_vsync5', 'mdp_vsync6', 'mdp_vsync7', 'mdp_vsync8', 'pcie3_clk', 'pcie4_clk', 'pcie5_clk', 'pcie6a_clk', 'pcie6b_clk', 'phase_flag', 'pll_bist', 'pll_clk', 'prng_rosc0', 'prng_r osc1', 'prng_rosc2', 'prng_rosc3', 'qdss_cti', 'qdss_gpio', 'qspi00', 'qspi01', 'qspi02', 'qspi03', 'qspi0_clk', 'qspi0_cs0', 'qspi0_cs1', 'qup0_se0', 'qup0_se1', 'qup0_se2', 'qup0_se3', 'qup0_se4', 'qup0_se5', 'qup0_se6', 'qup0_se7', 'qup1_se0', 'qup1_se1', 'qup1_se2', 'qup1_se3', 'qup1_se4', 'qup1_se5', 'qup1_se6', 'qup1_se7', 'qup2_se0', 'qup2_se1', 'qup2_se2', 'qup2_se3', 'qup2_se4', 'qup2_se5', 'qup2_se6', 'qup2_se7', 'sd_write', 'sdc4_clk', 'sdc4_cmd', 'sdc4_data0', 'sdc4_data1', 'sdc4_data2', 'sdc4_data3', 'sys_throttle', 'tb_trig', 'tgu_ch0', 'tgu_ch1', 'tgu_ch2', 'tgu_ch3', 'tgu_ch4', 'tgu_ch5', 'tgu_ch6', 'tgu_ch7', 'tmess_prng0', 'tmess_prng1', 'tmess_prng2', 'tmess_prng3', 'tsense_pwm1', 'tsense_pwm2', 'sense_pwm3', 'tsense_pwm4', 'usb0_dp', 'usb0_phy', 'usb0_sbrx', 'usb0_sbtx', 'usb1_dp', 'usb1_phy', 'usb1_sbrx', 'usb1_sbtx', 'usb2_dp', 'usb2_phy', 'usb2_sbrx', 'usb2_sbtx', 'vsense_trigger'] from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# arch/arm64/boot/dts/qcom/x1p42100-crd.dtb: pinctrl@f100000: edp-hpd-active-state: 'oneOf' conditional failed, one must be fixed: 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'edp_hot' is not one of ['aon_cci', 'aoss_cti', 'atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'atest_usb', 'audio_ext', 'audio_ref', 'cam_aon', 'cam_mclk', 'cci_async', 'cci_i2c', 'cci_timer0', 'cci_timer1', 'cci_timer2', 'cci_timer3', 'cci_timer4', 'cmu_rng0', 'cmu_rng1', 'cmu_rng2', 'cmu_rng3', 'cri_trng', 'dbg_out', 'ddr_bist', 'ddr_pxi0', 'ddr_pxi1', 'ddr_pxi2', 'ddr_pxi3', 'ddr_pxi4', 'ddr_pxi5', 'ddr_pxi6', 'ddr_pxi7', 'edp0_hot', 'edp0_lcd', 'edp1_hot', 'edp1_lcd', 'eusb0_ac', 'eusb1_ac', 'eusb2_ac', 'eusb3_ac', 'eusb5_ac', 'eusb6_ac', 'gcc_gp1', 'gcc_gp2', 'gcc_gp3', 'gpio', 'i2s0_data0', 'i2s0_data1', 'i2s0_sck', 'i2s0_ws', 'i2s1_data0', 'i2s1_data1', 'i2s1_sck', 'i2s1_ws', 'ibi_i3c', 'jitter_bist', 'mdp_vsync0', 'mdp_vsync1', 'mdp_vsync2', 'mdp_vsync3', 'mdp_vsync4', 'mdp_vsync5', 'mdp_vsync6', 'mdp_vsync7', 'mdp_vsync8', 'pcie3_clk', 'pcie4_clk', 'pcie5_clk', 'pcie6a_clk', 'pcie6b_clk', 'phase_flag', 'pll_bist', 'pll_clk', 'prng_rosc0', 'prng_r osc1', 'prng_rosc2', 'prng_rosc3', 'qdss_cti', 'qdss_gpio', 'qspi00', 'qspi01', 'qspi02', 'qspi03', 'qspi0_clk', 'qspi0_cs0', 'qspi0_cs1', 'qup0_se0', 'qup0_se1', 'qup0_se2', 'qup0_se3', 'qup0_se4', 'qup0_se5', 'qup0_se6', 'qup0_se7', 'qup1_se0', 'qup1_se1', 'qup1_se2', 'qup1_se3', 'qup1_se4', 'qup1_se5', 'qup1_se6', 'qup1_se7', 'qup2_se0', 'qup2_se1', 'qup2_se2', 'qup2_se3', 'qup2_se4', 'qup2_se5', 'qup2_se6', 'qup2_se7', 'sd_write', 'sdc4_clk', 'sdc4_cmd', 'sdc4_data0', 'sdc4_data1', 'sdc4_data2', 'sdc4_data3', 'sys_throttle', 'tb_trig', 'tgu_ch0', 'tgu_ch1', 'tgu_ch2', 'tgu_ch3', 'tgu_ch4', 'tgu_ch5', 'tgu_ch6', 'tgu_ch7', 'tmess_prng0', 'tmess_prng1', 'tmess_prng2', 'tmess_prng3', 'tsense_pwm1', 'tsense_pwm2', 'sense_pwm3', 'tsense_pwm4', 'usb0_dp', 'usb0_phy', 'usb0_sbrx', 'usb0_sbtx', 'usb1_dp', 'usb1_phy', 'usb1_sbrx', 'usb1_sbtx', 'usb2_dp', 'usb2_phy', 'usb2_sbrx', 'usb2_sbtx', 'vsense_trigger'] from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# arch/arm64/boot/dts/qcom/x1e001de-devkit.dtb: pinctrl@f100000: edp-hpd-active-state: 'oneOf' conditional failed, one must be fixed: 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'edp_hot' is not one of ['aon_cci', 'aoss_cti', 'atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'atest_usb', 'audio_ext', 'audio_ref', 'cam_aon', 'cam_mclk', 'cci_async', 'cci_i2c', 'cci_timer0', 'cci_timer1', 'cci_timer2', 'cci_timer3', 'cci_timer4', 'cmu_rng0', 'cmu_rng1', 'cmu_rng2', 'cmu_rng3', 'cri_trng', 'dbg_out', 'ddr_bist', 'ddr_pxi0', 'ddr_pxi1', 'ddr_pxi2', 'ddr_pxi3', 'ddr_pxi4', 'ddr_pxi5', 'ddr_pxi6', 'ddr_pxi7', 'edp0_hot', 'edp0_lcd', 'edp1_hot', 'edp1_lcd', 'eusb0_ac', 'eusb1_ac', 'eusb2_ac', 'eusb3_ac', 'eusb5_ac', 'eusb6_ac', 'gcc_gp1', 'gcc_gp2', 'gcc_gp3', 'gpio', 'i2s0_data0', 'i2s0_data1', 'i2s0_sck', 'i2s0_ws', 'i2s1_data0', 'i2s1_data1', 'i2s1_sck', 'i2s1_ws', 'ibi_i3c', 'jitter_bist', 'mdp_vsync0', 'mdp_vsync1', 'mdp_vsync2', 'mdp_vsync3', 'mdp_vsync4', 'mdp_vsync5', 'mdp_vsync6', 'mdp_vsync7', 'mdp_vsync8', 'pcie3_clk', 'pcie4_clk', 'pcie5_clk', 'pcie6a_clk', 'pcie6b_clk', 'phase_flag', 'pll_bist', 'pll_clk', 'prng_rosc0', 'prng_r osc1', 'prng_rosc2', 'prng_rosc3', 'qdss_cti', 'qdss_gpio', 'qspi00', 'qspi01', 'qspi02', 'qspi03', 'qspi0_clk', 'qspi0_cs0', 'qspi0_cs1', 'qup0_se0', 'qup0_se1', 'qup0_se2', 'qup0_se3', 'qup0_se4', 'qup0_se5', 'qup0_se6', 'qup0_se7', 'qup1_se0', 'qup1_se1', 'qup1_se2', 'qup1_se3', 'qup1_se4', 'qup1_se5', 'qup1_se6', 'qup1_se7', 'qup2_se0', 'qup2_se1', 'qup2_se2', 'qup2_se3', 'qup2_se4', 'qup2_se5', 'qup2_se6', 'qup2_se7', 'sd_write', 'sdc4_clk', 'sdc4_cmd', 'sdc4_data0', 'sdc4_data1', 'sdc4_data2', 'sdc4_data3', 'sys_throttle', 'tb_trig', 'tgu_ch0', 'tgu_ch1', 'tgu_ch2', 'tgu_ch3', 'tgu_ch4', 'tgu_ch5', 'tgu_ch6', 'tgu_ch7', 'tmess_prng0', 'tmess_prng1', 'tmess_prng2', 'tmess_prng3', 'tsense_pwm1', 'tsense_pwm2', 'sense_pwm3', 'tsense_pwm4', 'usb0_dp', 'usb0_phy', 'usb0_sbrx', 'usb0_sbtx', 'usb1_dp', 'usb1_phy', 'usb1_sbrx', 'usb1_sbtx', 'usb2_dp', 'usb2_phy', 'usb2_sbrx', 'usb2_sbtx', 'vsense_trigger'] from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dtb: pinctrl@f100000: edp-hpd-active-state: 'oneOf' conditional failed, one must be fixed: 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'edp_hot' is not one of ['aon_cci', 'aoss_cti', 'atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'atest_usb', 'audio_ext', 'audio_ref', 'cam_aon', 'cam_mclk', 'cci_async', 'cci_i2c', 'cci_timer0', 'cci_timer1', 'cci_timer2', 'cci_timer3', 'cci_timer4', 'cmu_rng0', 'cmu_rng1', 'cmu_rng2', 'cmu_rng3', 'cri_trng', 'dbg_out', 'ddr_bist', 'ddr_pxi0', 'ddr_pxi1', 'ddr_pxi2', 'ddr_pxi3', 'ddr_pxi4', 'ddr_pxi5', 'ddr_pxi6', 'ddr_pxi7', 'edp0_hot', 'edp0_lcd', 'edp1_hot', 'edp1_lcd', 'eusb0_ac', 'eusb1_ac', 'eusb2_ac', 'eusb3_ac', 'eusb5_ac', 'eusb6_ac', 'gcc_gp1', 'gcc_gp2', 'gcc_gp3', 'gpio', 'i2s0_data0', 'i2s0_data1', 'i2s0_sck', 'i2s0_ws', 'i2s1_data0', 'i2s1_data1', 'i2s1_sck', 'i2s1_ws', 'ibi_i3c', 'jitter_bist', 'mdp_vsync0', 'mdp_vsync1', 'mdp_vsync2', 'mdp_vsync3', 'mdp_vsync4', 'mdp_vsync5', 'mdp_vsync6', 'mdp_vsync7', 'mdp_vsync8', 'pcie3_clk', 'pcie4_clk', 'pcie5_clk', 'pcie6a_clk', 'pcie6b_clk', 'phase_flag', 'pll_bist', 'pll_clk', 'prng_rosc0', 'prng_r osc1', 'prng_rosc2', 'prng_rosc3', 'qdss_cti', 'qdss_gpio', 'qspi00', 'qspi01', 'qspi02', 'qspi03', 'qspi0_clk', 'qspi0_cs0', 'qspi0_cs1', 'qup0_se0', 'qup0_se1', 'qup0_se2', 'qup0_se3', 'qup0_se4', 'qup0_se5', 'qup0_se6', 'qup0_se7', 'qup1_se0', 'qup1_se1', 'qup1_se2', 'qup1_se3', 'qup1_se4', 'qup1_se5', 'qup1_se6', 'qup1_se7', 'qup2_se0', 'qup2_se1', 'qup2_se2', 'qup2_se3', 'qup2_se4', 'qup2_se5', 'qup2_se6', 'qup2_se7', 'sd_write', 'sdc4_clk', 'sdc4_cmd', 'sdc4_data0', 'sdc4_data1', 'sdc4_data2', 'sdc4_data3', 'sys_throttle', 'tb_trig', 'tgu_ch0', 'tgu_ch1', 'tgu_ch2', 'tgu_ch3', 'tgu_ch4', 'tgu_ch5', 'tgu_ch6', 'tgu_ch7', 'tmess_prng0', 'tmess_prng1', 'tmess_prng2', 'tmess_prng3', 'tsense_pwm1', 'tsense_pwm2', 'sense_pwm3', 'tsense_pwm4', 'usb0_dp', 'usb0_phy', 'usb0_sbrx', 'usb0_sbtx', 'usb1_dp', 'usb1_phy', 'usb1_sbrx', 'usb1_sbtx', 'usb2_dp', 'usb2_phy', 'usb2_sbrx', 'usb2_sbtx', 'vsense_trigger'] from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dtb: pinctrl@f100000: edp-hpd-active-state: 'oneOf' conditional failed, one must be fixed: 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'edp_hot' is not one of ['aon_cci', 'aoss_cti', 'atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'atest_usb', 'audio_ext', 'audio_ref', 'cam_aon', 'cam_mclk', 'cci_async', 'cci_i2c', 'cci_timer0', 'cci_timer1', 'cci_timer2', 'cci_timer3', 'cci_timer4', 'cmu_rng0', 'cmu_rng1', 'cmu_rng2', 'cmu_rng3', 'cri_trng', 'dbg_out', 'ddr_bist', 'ddr_pxi0', 'ddr_pxi1', 'ddr_pxi2', 'ddr_pxi3', 'ddr_pxi4', 'ddr_pxi5', 'ddr_pxi6', 'ddr_pxi7', 'edp0_hot', 'edp0_lcd', 'edp1_hot', 'edp1_lcd', 'eusb0_ac', 'eusb1_ac', 'eusb2_ac', 'eusb3_ac', 'eusb5_ac', 'eusb6_ac', 'gcc_gp1', 'gcc_gp2', 'gcc_gp3', 'gpio', 'i2s0_data0', 'i2s0_data1', 'i2s0_sck', 'i2s0_ws', 'i2s1_data0', 'i2s1_data1', 'i2s1_sck', 'i2s1_ws', 'ibi_i3c', 'jitter_bist', 'mdp_vsync0', 'mdp_vsync1', 'mdp_vsync2', 'mdp_vsync3', 'mdp_vsync4', 'mdp_vsync5', 'mdp_vsync6', 'mdp_vsync7', 'mdp_vsync8', 'pcie3_clk', 'pcie4_clk', 'pcie5_clk', 'pcie6a_clk', 'pcie6b_clk', 'phase_flag', 'pll_bist', 'pll_clk', 'prng_rosc0', 'prng_r osc1', 'prng_rosc2', 'prng_rosc3', 'qdss_cti', 'qdss_gpio', 'qspi00', 'qspi01', 'qspi02', 'qspi03', 'qspi0_clk', 'qspi0_cs0', 'qspi0_cs1', 'qup0_se0', 'qup0_se1', 'qup0_se2', 'qup0_se3', 'qup0_se4', 'qup0_se5', 'qup0_se6', 'qup0_se7', 'qup1_se0', 'qup1_se1', 'qup1_se2', 'qup1_se3', 'qup1_se4', 'qup1_se5', 'qup1_se6', 'qup1_se7', 'qup2_se0', 'qup2_se1', 'qup2_se2', 'qup2_se3', 'qup2_se4', 'qup2_se5', 'qup2_se6', 'qup2_se7', 'sd_write', 'sdc4_clk', 'sdc4_cmd', 'sdc4_data0', 'sdc4_data1', 'sdc4_data2', 'sdc4_data3', 'sys_throttle', 'tb_trig', 'tgu_ch0', 'tgu_ch1', 'tgu_ch2', 'tgu_ch3', 'tgu_ch4', 'tgu_ch5', 'tgu_ch6', 'tgu_ch7', 'tmess_prng0', 'tmess_prng1', 'tmess_prng2', 'tmess_prng3', 'tsense_pwm1', 'tsense_pwm2', 'sense_pwm3', 'tsense_pwm4', 'usb0_dp', 'usb0_phy', 'usb0_sbrx', 'usb0_sbtx', 'usb1_dp', 'usb1_phy', 'usb1_sbrx', 'usb1_sbtx', 'usb2_dp', 'usb2_phy', 'usb2_sbrx', 'usb2_sbtx', 'vsense_trigger'] from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus15.dtb: pinctrl@f100000: edp-hpd-active-state: 'oneOf' conditional failed, one must be fixed: 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'edp_hot' is not one of ['aon_cci', 'aoss_cti', 'atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'atest_usb', 'audio_ext', 'audio_ref', 'cam_aon', 'cam_mclk', 'cci_async', 'cci_i2c', 'cci_timer0', 'cci_timer1', 'cci_timer2', 'cci_timer3', 'cci_timer4', 'cmu_rng0', 'cmu_rng1', 'cmu_rng2', 'cmu_rng3', 'cri_trng', 'dbg_out', 'ddr_bist', 'ddr_pxi0', 'ddr_pxi1', 'ddr_pxi2', 'ddr_pxi3', 'ddr_pxi4', 'ddr_pxi5', 'ddr_pxi6', 'ddr_pxi7', 'edp0_hot', 'edp0_lcd', 'edp1_hot', 'edp1_lcd', 'eusb0_ac', 'eusb1_ac', 'eusb2_ac', 'eusb3_ac', 'eusb5_ac', 'eusb6_ac', 'gcc_gp1', 'gcc_gp2', 'gcc_gp3', 'gpio', 'i2s0_data0', 'i2s0_data1', 'i2s0_sck', 'i2s0_ws', 'i2s1_data0', 'i2s1_data1', 'i2s1_sck', 'i2s1_ws', 'ibi_i3c', 'jitter_bist', 'mdp_vsync0', 'mdp_vsync1', 'mdp_vsync2', 'mdp_vsync3', 'mdp_vsync4', 'mdp_vsync5', 'mdp_vsync6', 'mdp_vsync7', 'mdp_vsync8', 'pcie3_clk', 'pcie4_clk', 'pcie5_clk', 'pcie6a_clk', 'pcie6b_clk', 'phase_flag', 'pll_bist', 'pll_clk', 'prng_rosc0', 'prng_r osc1', 'prng_rosc2', 'prng_rosc3', 'qdss_cti', 'qdss_gpio', 'qspi00', 'qspi01', 'qspi02', 'qspi03', 'qspi0_clk', 'qspi0_cs0', 'qspi0_cs1', 'qup0_se0', 'qup0_se1', 'qup0_se2', 'qup0_se3', 'qup0_se4', 'qup0_se5', 'qup0_se6', 'qup0_se7', 'qup1_se0', 'qup1_se1', 'qup1_se2', 'qup1_se3', 'qup1_se4', 'qup1_se5', 'qup1_se6', 'qup1_se7', 'qup2_se0', 'qup2_se1', 'qup2_se2', 'qup2_se3', 'qup2_se4', 'qup2_se5', 'qup2_se6', 'qup2_se7', 'sd_write', 'sdc4_clk', 'sdc4_cmd', 'sdc4_data0', 'sdc4_data1', 'sdc4_data2', 'sdc4_data3', 'sys_throttle', 'tb_trig', 'tgu_ch0', 'tgu_ch1', 'tgu_ch2', 'tgu_ch3', 'tgu_ch4', 'tgu_ch5', 'tgu_ch6', 'tgu_ch7', 'tmess_prng0', 'tmess_prng1', 'tmess_prng2', 'tmess_prng3', 'tsense_pwm1', 'tsense_pwm2', 'sense_pwm3', 'tsense_pwm4', 'usb0_dp', 'usb0_phy', 'usb0_sbrx', 'usb0_sbtx', 'usb1_dp', 'usb1_phy', 'usb1_sbrx', 'usb1_sbtx', 'usb2_dp', 'usb2_phy', 'usb2_sbrx', 'usb2_sbtx', 'vsense_trigger'] from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# arch/arm64/boot/dts/qcom/x1e80100-qcp.dtb: pinctrl@f100000: edp-hpd-active-state: 'oneOf' conditional failed, one must be fixed: 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'edp_hot' is not one of ['aon_cci', 'aoss_cti', 'atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'atest_usb', 'audio_ext', 'audio_ref', 'cam_aon', 'cam_mclk', 'cci_async', 'cci_i2c', 'cci_timer0', 'cci_timer1', 'cci_timer2', 'cci_timer3', 'cci_timer4', 'cmu_rng0', 'cmu_rng1', 'cmu_rng2', 'cmu_rng3', 'cri_trng', 'dbg_out', 'ddr_bist', 'ddr_pxi0', 'ddr_pxi1', 'ddr_pxi2', 'ddr_pxi3', 'ddr_pxi4', 'ddr_pxi5', 'ddr_pxi6', 'ddr_pxi7', 'edp0_hot', 'edp0_lcd', 'edp1_hot', 'edp1_lcd', 'eusb0_ac', 'eusb1_ac', 'eusb2_ac', 'eusb3_ac', 'eusb5_ac', 'eusb6_ac', 'gcc_gp1', 'gcc_gp2', 'gcc_gp3', 'gpio', 'i2s0_data0', 'i2s0_data1', 'i2s0_sck', 'i2s0_ws', 'i2s1_data0', 'i2s1_data1', 'i2s1_sck', 'i2s1_ws', 'ibi_i3c', 'jitter_bist', 'mdp_vsync0', 'mdp_vsync1', 'mdp_vsync2', 'mdp_vsync3', 'mdp_vsync4', 'mdp_vsync5', 'mdp_vsync6', 'mdp_vsync7', 'mdp_vsync8', 'pcie3_clk', 'pcie4_clk', 'pcie5_clk', 'pcie6a_clk', 'pcie6b_clk', 'phase_flag', 'pll_bist', 'pll_clk', 'prng_rosc0', 'prng_r osc1', 'prng_rosc2', 'prng_rosc3', 'qdss_cti', 'qdss_gpio', 'qspi00', 'qspi01', 'qspi02', 'qspi03', 'qspi0_clk', 'qspi0_cs0', 'qspi0_cs1', 'qup0_se0', 'qup0_se1', 'qup0_se2', 'qup0_se3', 'qup0_se4', 'qup0_se5', 'qup0_se6', 'qup0_se7', 'qup1_se0', 'qup1_se1', 'qup1_se2', 'qup1_se3', 'qup1_se4', 'qup1_se5', 'qup1_se6', 'qup1_se7', 'qup2_se0', 'qup2_se1', 'qup2_se2', 'qup2_se3', 'qup2_se4', 'qup2_se5', 'qup2_se6', 'qup2_se7', 'sd_write', 'sdc4_clk', 'sdc4_cmd', 'sdc4_data0', 'sdc4_data1', 'sdc4_data2', 'sdc4_data3', 'sys_throttle', 'tb_trig', 'tgu_ch0', 'tgu_ch1', 'tgu_ch2', 'tgu_ch3', 'tgu_ch4', 'tgu_ch5', 'tgu_ch6', 'tgu_ch7', 'tmess_prng0', 'tmess_prng1', 'tmess_prng2', 'tmess_prng3', 'tsense_pwm1', 'tsense_pwm2', 'sense_pwm3', 'tsense_pwm4', 'usb0_dp', 'usb0_phy', 'usb0_sbrx', 'usb0_sbtx', 'usb1_dp', 'usb1_phy', 'usb1_sbrx', 'usb1_sbtx', 'usb2_dp', 'usb2_phy', 'usb2_sbrx', 'usb2_sbtx', 'vsense_trigger'] from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtb: pinctrl@f100000: edp-hpd-active-state: 'oneOf' conditional failed, one must be fixed: 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'edp_hot' is not one of ['aon_cci', 'aoss_cti', 'atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'atest_usb', 'audio_ext', 'audio_ref', 'cam_aon', 'cam_mclk', 'cci_async', 'cci_i2c', 'cci_timer0', 'cci_timer1', 'cci_timer2', 'cci_timer3', 'cci_timer4', 'cmu_rng0', 'cmu_rng1', 'cmu_rng2', 'cmu_rng3', 'cri_trng', 'dbg_out', 'ddr_bist', 'ddr_pxi0', 'ddr_pxi1', 'ddr_pxi2', 'ddr_pxi3', 'ddr_pxi4', 'ddr_pxi5', 'ddr_pxi6', 'ddr_pxi7', 'edp0_hot', 'edp0_lcd', 'edp1_hot', 'edp1_lcd', 'eusb0_ac', 'eusb1_ac', 'eusb2_ac', 'eusb3_ac', 'eusb5_ac', 'eusb6_ac', 'gcc_gp1', 'gcc_gp2', 'gcc_gp3', 'gpio', 'i2s0_data0', 'i2s0_data1', 'i2s0_sck', 'i2s0_ws', 'i2s1_data0', 'i2s1_data1', 'i2s1_sck', 'i2s1_ws', 'ibi_i3c', 'jitter_bist', 'mdp_vsync0', 'mdp_vsync1', 'mdp_vsync2', 'mdp_vsync3', 'mdp_vsync4', 'mdp_vsync5', 'mdp_vsync6', 'mdp_vsync7', 'mdp_vsync8', 'pcie3_clk', 'pcie4_clk', 'pcie5_clk', 'pcie6a_clk', 'pcie6b_clk', 'phase_flag', 'pll_bist', 'pll_clk', 'prng_rosc0', 'prng_r osc1', 'prng_rosc2', 'prng_rosc3', 'qdss_cti', 'qdss_gpio', 'qspi00', 'qspi01', 'qspi02', 'qspi03', 'qspi0_clk', 'qspi0_cs0', 'qspi0_cs1', 'qup0_se0', 'qup0_se1', 'qup0_se2', 'qup0_se3', 'qup0_se4', 'qup0_se5', 'qup0_se6', 'qup0_se7', 'qup1_se0', 'qup1_se1', 'qup1_se2', 'qup1_se3', 'qup1_se4', 'qup1_se5', 'qup1_se6', 'qup1_se7', 'qup2_se0', 'qup2_se1', 'qup2_se2', 'qup2_se3', 'qup2_se4', 'qup2_se5', 'qup2_se6', 'qup2_se7', 'sd_write', 'sdc4_clk', 'sdc4_cmd', 'sdc4_data0', 'sdc4_data1', 'sdc4_data2', 'sdc4_data3', 'sys_throttle', 'tb_trig', 'tgu_ch0', 'tgu_ch1', 'tgu_ch2', 'tgu_ch3', 'tgu_ch4', 'tgu_ch5', 'tgu_ch6', 'tgu_ch7', 'tmess_prng0', 'tmess_prng1', 'tmess_prng2', 'tmess_prng3', 'tsense_pwm1', 'tsense_pwm2', 'sense_pwm3', 'tsense_pwm4', 'usb0_dp', 'usb0_phy', 'usb0_sbrx', 'usb0_sbtx', 'usb1_dp', 'usb1_phy', 'usb1_sbrx', 'usb1_sbtx', 'usb2_dp', 'usb2_phy', 'usb2_sbrx', 'usb2_sbtx', 'vsense_trigger'] from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: pinctrl@f100000: edp-hpd-active-state: 'oneOf' conditional failed, one must be fixed: 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'edp_hot' is not one of ['aon_cci', 'aoss_cti', 'atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'atest_usb', 'audio_ext', 'audio_ref', 'cam_aon', 'cam_mclk', 'cci_async', 'cci_i2c', 'cci_timer0', 'cci_timer1', 'cci_timer2', 'cci_timer3', 'cci_timer4', 'cmu_rng0', 'cmu_rng1', 'cmu_rng2', 'cmu_rng3', 'cri_trng', 'dbg_out', 'ddr_bist', 'ddr_pxi0', 'ddr_pxi1', 'ddr_pxi2', 'ddr_pxi3', 'ddr_pxi4', 'ddr_pxi5', 'ddr_pxi6', 'ddr_pxi7', 'edp0_hot', 'edp0_lcd', 'edp1_hot', 'edp1_lcd', 'eusb0_ac', 'eusb1_ac', 'eusb2_ac', 'eusb3_ac', 'eusb5_ac', 'eusb6_ac', 'gcc_gp1', 'gcc_gp2', 'gcc_gp3', 'gpio', 'i2s0_data0', 'i2s0_data1', 'i2s0_sck', 'i2s0_ws', 'i2s1_data0', 'i2s1_data1', 'i2s1_sck', 'i2s1_ws', 'ibi_i3c', 'jitter_bist', 'mdp_vsync0', 'mdp_vsync1', 'mdp_vsync2', 'mdp_vsync3', 'mdp_vsync4', 'mdp_vsync5', 'mdp_vsync6', 'mdp_vsync7', 'mdp_vsync8', 'pcie3_clk', 'pcie4_clk', 'pcie5_clk', 'pcie6a_clk', 'pcie6b_clk', 'phase_flag', 'pll_bist', 'pll_clk', 'prng_rosc0', 'prng_r osc1', 'prng_rosc2', 'prng_rosc3', 'qdss_cti', 'qdss_gpio', 'qspi00', 'qspi01', 'qspi02', 'qspi03', 'qspi0_clk', 'qspi0_cs0', 'qspi0_cs1', 'qup0_se0', 'qup0_se1', 'qup0_se2', 'qup0_se3', 'qup0_se4', 'qup0_se5', 'qup0_se6', 'qup0_se7', 'qup1_se0', 'qup1_se1', 'qup1_se2', 'qup1_se3', 'qup1_se4', 'qup1_se5', 'qup1_se6', 'qup1_se7', 'qup2_se0', 'qup2_se1', 'qup2_se2', 'qup2_se3', 'qup2_se4', 'qup2_se5', 'qup2_se6', 'qup2_se7', 'sd_write', 'sdc4_clk', 'sdc4_cmd', 'sdc4_data0', 'sdc4_data1', 'sdc4_data2', 'sdc4_data3', 'sys_throttle', 'tb_trig', 'tgu_ch0', 'tgu_ch1', 'tgu_ch2', 'tgu_ch3', 'tgu_ch4', 'tgu_ch5', 'tgu_ch6', 'tgu_ch7', 'tmess_prng0', 'tmess_prng1', 'tmess_prng2', 'tmess_prng3', 'tsense_pwm1', 'tsense_pwm2', 'sense_pwm3', 'tsense_pwm4', 'usb0_dp', 'usb0_phy', 'usb0_sbrx', 'usb0_sbtx', 'usb1_dp', 'usb1_phy', 'usb1_sbrx', 'usb1_sbtx', 'usb2_dp', 'usb2_phy', 'usb2_sbrx', 'usb2_sbtx', 'vsense_trigger'] from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus13.dtb: pinctrl@f100000: edp-hpd-active-state: 'oneOf' conditional failed, one must be fixed: 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' 'edp_hot' is not one of ['aon_cci', 'aoss_cti', 'atest_char', 'atest_char0', 'atest_char1', 'atest_char2', 'atest_char3', 'atest_usb', 'audio_ext', 'audio_ref', 'cam_aon', 'cam_mclk', 'cci_async', 'cci_i2c', 'cci_timer0', 'cci_timer1', 'cci_timer2', 'cci_timer3', 'cci_timer4', 'cmu_rng0', 'cmu_rng1', 'cmu_rng2', 'cmu_rng3', 'cri_trng', 'dbg_out', 'ddr_bist', 'ddr_pxi0', 'ddr_pxi1', 'ddr_pxi2', 'ddr_pxi3', 'ddr_pxi4', 'ddr_pxi5', 'ddr_pxi6', 'ddr_pxi7', 'edp0_hot', 'edp0_lcd', 'edp1_hot', 'edp1_lcd', 'eusb0_ac', 'eusb1_ac', 'eusb2_ac', 'eusb3_ac', 'eusb5_ac', 'eusb6_ac', 'gcc_gp1', 'gcc_gp2', 'gcc_gp3', 'gpio', 'i2s0_data0', 'i2s0_data1', 'i2s0_sck', 'i2s0_ws', 'i2s1_data0', 'i2s1_data1', 'i2s1_sck', 'i2s1_ws', 'ibi_i3c', 'jitter_bist', 'mdp_vsync0', 'mdp_vsync1', 'mdp_vsync2', 'mdp_vsync3', 'mdp_vsync4', 'mdp_vsync5', 'mdp_vsync6', 'mdp_vsync7', 'mdp_vsync8', 'pcie3_clk', 'pcie4_clk', 'pcie5_clk', 'pcie6a_clk', 'pcie6b_clk', 'phase_flag', 'pll_bist', 'pll_clk', 'prng_rosc0', 'prng_r osc1', 'prng_rosc2', 'prng_rosc3', 'qdss_cti', 'qdss_gpio', 'qspi00', 'qspi01', 'qspi02', 'qspi03', 'qspi0_clk', 'qspi0_cs0', 'qspi0_cs1', 'qup0_se0', 'qup0_se1', 'qup0_se2', 'qup0_se3', 'qup0_se4', 'qup0_se5', 'qup0_se6', 'qup0_se7', 'qup1_se0', 'qup1_se1', 'qup1_se2', 'qup1_se3', 'qup1_se4', 'qup1_se5', 'qup1_se6', 'qup1_se7', 'qup2_se0', 'qup2_se1', 'qup2_se2', 'qup2_se3', 'qup2_se4', 'qup2_se5', 'qup2_se6', 'qup2_se7', 'sd_write', 'sdc4_clk', 'sdc4_cmd', 'sdc4_data0', 'sdc4_data1', 'sdc4_data2', 'sdc4_data3', 'sys_throttle', 'tb_trig', 'tgu_ch0', 'tgu_ch1', 'tgu_ch2', 'tgu_ch3', 'tgu_ch4', 'tgu_ch5', 'tgu_ch6', 'tgu_ch7', 'tmess_prng0', 'tmess_prng1', 'tmess_prng2', 'tmess_prng3', 'tsense_pwm1', 'tsense_pwm2', 'sense_pwm3', 'tsense_pwm4', 'usb0_dp', 'usb0_phy', 'usb0_sbrx', 'usb0_sbtx', 'usb1_dp', 'usb1_phy', 'usb1_sbrx', 'usb1_sbtx', 'usb2_dp', 'usb2_phy', 'usb2_sbrx', 'usb2_sbtx', 'vsense_trigger'] from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml#
The Snapdragon Lenovo T14s Gen6 can be bought with a number of different panels. This patch series adds support for the OLED model which has a Samsung ATNA40YK20 panel. With this patch series the backlight of the OLED eDP panel does not illuminate since the brightness is incorrectly read from the eDP panel as (to be clear this is not a regression). This is fixed in [0]. [0]: https://lore.kernel.org/all/20250330-wip-obbardc-qcom-t14s-oled-panel-brightness-v6-1-84ad1cd1078a@linaro.org/ Signed-off-by: Christopher Obbard <christopher.obbard@linaro.org> --- Changes in v5: - Move edp_hpd_active from T14s DTS into SoC DTSI (Dmitry). - Link to v4: https://lore.kernel.org/r/20250402-wip-obbardc-qcom-t14s-oled-panel-v4-0-41ba3f3739d0@linaro.org Changes in v4: - Rework HPD GPIO into eDP device rather than panel (Johan). - Drop review tags for HPD GPIO patch. - Link to v3: https://lore.kernel.org/r/20250327-wip-obbardc-qcom-t14s-oled-panel-v3-0-45d5f2747398@linaro.org Changes in v3: - Added review trailers from v2. - Dropped dt-binding documentation patch (applied by Douglas Anderson into drm-misc-next). - Dropped eDP maximum brightness patch (will be sent in separate series). - Removed duplicate nodes in T14s OLED device tree. - Reworked WIP comments from commit messages. - Link to v2: https://lore.kernel.org/r/20250325-wip-obbardc-qcom-t14s-oled-panel-v2-0-e9bc7c9d30cc@linaro.org Changes in v2: - Use the existing atna33xc20 driver rather than panel-edp. - Add eDP panel into OLED devicetree. - Add patch to read the correct maximum brightness from the eDP panel. - Link to v1: https://lore.kernel.org/r/20250320-wip-obbardc-qcom-t14s-oled-panel-v1-1-05bc4bdcd82a@linaro.org --- Christopher Obbard (3): arm64: dts: qcom: x1e80100: add epd hpd pinctrl arm64: dts: qcom: x1e78100-t14s: add hpd gpio to dp controller arm64: dts: qcom: x1e78100-t14s-oled: add edp panel arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts | 8 ++++++++ arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi | 3 +++ arch/arm64/boot/dts/qcom/x1e80100.dtsi | 5 +++++ 3 files changed, 16 insertions(+) --- base-commit: b6ae34803e82511009e2b78dc4fd154330ecdc2d change-id: 20250320-wip-obbardc-qcom-t14s-oled-panel-b74fed21d600 Best regards,