@@ -725,30 +725,34 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
tilcdc_crtc->frame_intact = true;
}
+ if (stat & LCDC_FIFO_UNDERFLOW)
+ dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underfow",
+ __func__, stat);
+
+ /* For revision 2 only */
if (priv->rev == 2) {
if (stat & LCDC_FRAME_DONE) {
tilcdc_crtc->frame_done = true;
wake_up(&tilcdc_crtc->frame_done_wq);
}
- tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
- }
- if (stat & LCDC_SYNC_LOST) {
- dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost",
- __func__, stat);
- tilcdc_crtc->frame_intact = false;
- if (tilcdc_crtc->sync_lost_count++ > SYNC_LOST_COUNT_LIMIT) {
- dev_err(dev->dev,
- "%s(0x%08x): Sync lost flood detected, disabling the interrupt",
- __func__, stat);
- tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
- LCDC_SYNC_LOST);
+ if (stat & LCDC_SYNC_LOST) {
+ dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost",
+ __func__, stat);
+ tilcdc_crtc->frame_intact = false;
+ if (tilcdc_crtc->sync_lost_count++ >
+ SYNC_LOST_COUNT_LIMIT) {
+ dev_err(dev->dev, "%s(0x%08x): Sync lost flood detected, disabling the interrupt", __func__, stat);
+ tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
+ LCDC_SYNC_LOST);
+ }
}
- }
- if (stat & LCDC_FIFO_UNDERFLOW)
- dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underfow",
- __func__, stat);
+ /* Indicate to LCDC that the interrupt service routine has
+ * completed, see 13.3.6.1.6 in AM335x TRM.
+ */
+ tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
+ }
return IRQ_HANDLED;
}
Reorder the IRQ function so that the write to LCDC_END_OF_INT_IND_REG is done last. The write to LCDC_END_OF_INT_IND_REG indicates to LCDC that the interrupt service routine has completed (see section 13.3.6.1.6 in AM335x TRM). This is needed if LCDC's ipgvmodirq module is configured for pulse interrupts. Signed-off-by: Jyri Sarha <jsarha@ti.com> --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 36 ++++++++++++++++++++---------------- 1 file changed, 20 insertions(+), 16 deletions(-)