Message ID | 1314758512-19285-2-git-send-email-konrad.wilk@oracle.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Tue, 30 Aug 2011 22:41:46 -0400 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: > . instead of checking against the DMA_ERROR_CODE value which is > per-platform specific. The zero value is a known invalid value > that the TTM layer sets on the dma_address array if it is not > used (ttm_tt_alloc_page_directory calls drm_calloc_large which > creates a page with GFP_ZERO). > > We can't use pci_dma_mapping_error as that is IOMMU > specific (some check for a specific physical address, some > for ranges, some just do a check against zero). > > Also update the comments in the header about the true state > of that parameter. > > Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > --- > drivers/gpu/drm/nouveau/nouveau_sgdma.c | 3 +-- > drivers/gpu/drm/radeon/radeon_gart.c | 4 +--- > include/drm/ttm/ttm_page_alloc.h | 4 ++-- > 3 files changed, 4 insertions(+), 7 deletions(-) > > diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c > b/drivers/gpu/drm/nouveau/nouveau_sgdma.c index 82fad91..624e2db > 100644 --- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c > +++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c > @@ -42,8 +42,7 @@ nouveau_sgdma_populate(struct ttm_backend *be, > unsigned long num_pages, > nvbe->nr_pages = 0; > while (num_pages--) { > - /* this code path isn't called and is incorrect > anyways */ > - if (0) { /*dma_addrs[nvbe->nr_pages] != > DMA_ERROR_CODE)*/ > + if (dev->pdev, dma_addrs[nvbe->nr_pages] != 0) { This is weird, do you mean && instead of a comma, or what? Or am I completely missing the comma operator semantics? > nvbe->pages[nvbe->nr_pages] = > dma_addrs[nvbe->nr_pages]; > nvbe->ttm_alloced[nvbe->nr_pages] = > true; diff --git a/drivers/gpu/drm/radeon/radeon_gart.c > b/drivers/gpu/drm/radeon/radeon_gart.c index a533f52..41f7e51 > 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c > +++ b/drivers/gpu/drm/radeon/radeon_gart.c > @@ -181,9 +181,7 @@ int radeon_gart_bind(struct radeon_device > *rdev, unsigned offset, p = t / (PAGE_SIZE / > RADEON_GPU_PAGE_SIZE); > for (i = 0; i < pages; i++, p++) { > - /* we reverted the patch using dma_addr in TTM > for now but this > - * code stops building on alpha so just comment > it out for now */ > - if (0) { /*dma_addr[i] != DMA_ERROR_CODE) */ > + if (rdev->pdev, dma_addr[i] != 0) { The same question for this condition.
On Wed, Aug 31, 2011 at 09:33:29AM +0300, Pekka Paalanen wrote: > On Tue, 30 Aug 2011 22:41:46 -0400 > Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: > > > . instead of checking against the DMA_ERROR_CODE value which is > > per-platform specific. The zero value is a known invalid value > > that the TTM layer sets on the dma_address array if it is not > > used (ttm_tt_alloc_page_directory calls drm_calloc_large which > > creates a page with GFP_ZERO). > > > > We can't use pci_dma_mapping_error as that is IOMMU > > specific (some check for a specific physical address, some > > for ranges, some just do a check against zero). > > > > Also update the comments in the header about the true state > > of that parameter. > > > > Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > > --- > > drivers/gpu/drm/nouveau/nouveau_sgdma.c | 3 +-- > > drivers/gpu/drm/radeon/radeon_gart.c | 4 +--- > > include/drm/ttm/ttm_page_alloc.h | 4 ++-- > > 3 files changed, 4 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c > > b/drivers/gpu/drm/nouveau/nouveau_sgdma.c index 82fad91..624e2db > > 100644 --- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c > > +++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c > > @@ -42,8 +42,7 @@ nouveau_sgdma_populate(struct ttm_backend *be, > > unsigned long num_pages, > > nvbe->nr_pages = 0; > > while (num_pages--) { > > - /* this code path isn't called and is incorrect > > anyways */ > > - if (0) { /*dma_addrs[nvbe->nr_pages] != > > DMA_ERROR_CODE)*/ > > + if (dev->pdev, dma_addrs[nvbe->nr_pages] != 0) { > > This is weird, do you mean && instead of a comma, or what? > Or am I completely missing the comma operator semantics? Earlier implementation had this: if (!pci_dma_mapping_error(rdev->pdev, dma_addr[i])) { And then I changed it to check just the dma_addrs[x] (as the different IOMMUs would provide irregular values), but this ',' is really weird - no idea how it actually even compiles. It should have just been: if (dma_addrs[nvbe->nr_pages] != 0) { > > > nvbe->pages[nvbe->nr_pages] = > > dma_addrs[nvbe->nr_pages]; > > nvbe->ttm_alloced[nvbe->nr_pages] = > > true; diff --git a/drivers/gpu/drm/radeon/radeon_gart.c > > b/drivers/gpu/drm/radeon/radeon_gart.c index a533f52..41f7e51 > > 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c > > +++ b/drivers/gpu/drm/radeon/radeon_gart.c > > @@ -181,9 +181,7 @@ int radeon_gart_bind(struct radeon_device > > *rdev, unsigned offset, p = t / (PAGE_SIZE / > > RADEON_GPU_PAGE_SIZE); > > for (i = 0; i < pages; i++, p++) { > > - /* we reverted the patch using dma_addr in TTM > > for now but this > > - * code stops building on alpha so just comment > > it out for now */ > > - if (0) { /*dma_addr[i] != DMA_ERROR_CODE) */ > > + if (rdev->pdev, dma_addr[i] != 0) { > > The same question for this condition. The same here. Reading http://stackoverflow.com/questions/2087026/effect-of-using-a-comma-instead-of-a-semi-colon-in-c-and-c says that it actually did the right thing (evaluated the last thing) - but I am going to remove the pdev part. Thanks for spotting this! > > -- > Pekka Paalanen > http://www.iki.fi/pq/
diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c index 82fad91..624e2db 100644 --- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c +++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c @@ -42,8 +42,7 @@ nouveau_sgdma_populate(struct ttm_backend *be, unsigned long num_pages, nvbe->nr_pages = 0; while (num_pages--) { - /* this code path isn't called and is incorrect anyways */ - if (0) { /*dma_addrs[nvbe->nr_pages] != DMA_ERROR_CODE)*/ + if (dev->pdev, dma_addrs[nvbe->nr_pages] != 0) { nvbe->pages[nvbe->nr_pages] = dma_addrs[nvbe->nr_pages]; nvbe->ttm_alloced[nvbe->nr_pages] = true; diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index a533f52..41f7e51 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -181,9 +181,7 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset, p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); for (i = 0; i < pages; i++, p++) { - /* we reverted the patch using dma_addr in TTM for now but this - * code stops building on alpha so just comment it out for now */ - if (0) { /*dma_addr[i] != DMA_ERROR_CODE) */ + if (rdev->pdev, dma_addr[i] != 0) { rdev->gart.ttm_alloced[p] = true; rdev->gart.pages_addr[p] = dma_addr[i]; } else { diff --git a/include/drm/ttm/ttm_page_alloc.h b/include/drm/ttm/ttm_page_alloc.h index 8062890..0017b17 100644 --- a/include/drm/ttm/ttm_page_alloc.h +++ b/include/drm/ttm/ttm_page_alloc.h @@ -36,7 +36,7 @@ * @flags: ttm flags for page allocation. * @cstate: ttm caching state for the page. * @count: number of pages to allocate. - * @dma_address: The DMA (bus) address of pages (if TTM_PAGE_FLAG_DMA32 set). + * @dma_address: The DMA (bus) address of pages - (by default zero). */ int ttm_get_pages(struct list_head *pages, int flags, @@ -51,7 +51,7 @@ int ttm_get_pages(struct list_head *pages, * count. * @flags: ttm flags for page allocation. * @cstate: ttm caching state. - * @dma_address: The DMA (bus) address of pages (if TTM_PAGE_FLAG_DMA32 set). + * @dma_address: The DMA (bus) address of pages (by default zero). */ void ttm_put_pages(struct list_head *pages, unsigned page_count,
. instead of checking against the DMA_ERROR_CODE value which is per-platform specific. The zero value is a known invalid value that the TTM layer sets on the dma_address array if it is not used (ttm_tt_alloc_page_directory calls drm_calloc_large which creates a page with GFP_ZERO). We can't use pci_dma_mapping_error as that is IOMMU specific (some check for a specific physical address, some for ranges, some just do a check against zero). Also update the comments in the header about the true state of that parameter. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> --- drivers/gpu/drm/nouveau/nouveau_sgdma.c | 3 +-- drivers/gpu/drm/radeon/radeon_gart.c | 4 +--- include/drm/ttm/ttm_page_alloc.h | 4 ++-- 3 files changed, 4 insertions(+), 7 deletions(-)