@@ -889,7 +889,9 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl)
*/
bool vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
{
+ struct vsp1_device *vsp1 = dlm->vsp1;
bool completed = false;
+ u32 status = vsp1_read(vsp1, VI6_STATUS);
spin_lock(&dlm->lock);
@@ -914,6 +916,14 @@ bool vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
goto done;
/*
+ * Progressive streams report only TOP fields. If we have a BOTTOM
+ * field, we are interlaced, and expect the frame to complete on the
+ * next frame end interrupt.
+ */
+ if (status & VI6_STATUS_FLD_STD(dlm->index))
+ goto done;
+
+ /*
* The device starts processing the queued display list right after the
* frame end interrupt. The display list thus becomes active.
*/
@@ -368,6 +368,17 @@ int vsp1_du_atomic_update(struct device *dev, unsigned int pipe_index,
return -EINVAL;
}
+ if (!(vsp1_feature(vsp1, VSP1_HAS_EXT_DL)) && cfg->interlaced) {
+ /*
+ * Interlaced support requires extended display lists to
+ * provide the auto-fld feature with the DU.
+ */
+ dev_dbg(vsp1->dev, "Interlaced unsupported on this output\n");
+ return -EINVAL;
+ }
+
+ rpf->interlaced = cfg->interlaced;
+
rpf->fmtinfo = fmtinfo;
rpf->format.num_planes = fmtinfo->planes;
rpf->format.plane_fmt[0].bytesperline = cfg->pitch;
@@ -31,6 +31,7 @@
#define VI6_SRESET_SRTS(n) (1 << (n))
#define VI6_STATUS 0x0038
+#define VI6_STATUS_FLD_STD(n) (1 << ((n) + 28))
#define VI6_STATUS_SYS_ACT(n) (1 << ((n) + 8))
#define VI6_WPF_IRQ_ENB(n) (0x0048 + (n) * 12)
@@ -24,6 +24,20 @@
#define RPF_MAX_WIDTH 8190
#define RPF_MAX_HEIGHT 8190
+/* Pre extended display list command data structure */
+struct vsp1_extcmd_auto_fld_body {
+ u32 top_y0;
+ u32 bottom_y0;
+ u32 top_c0;
+ u32 bottom_c0;
+ u32 top_c1;
+ u32 bottom_c1;
+ u32 reserved0;
+ u32 reserved1;
+} __packed;
+
+#define VSP1_DL_EXT_AUTOFLD_INT BIT(0)
+
/* -----------------------------------------------------------------------------
* Device Access
*/
@@ -68,6 +82,14 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
pstride |= format->plane_fmt[1].bytesperline
<< VI6_RPF_SRCM_PSTRIDE_C_SHIFT;
+ /*
+ * pstride has both STRIDE_Y and STRIDE_C, but multiplying the whole
+ * of pstride by 2 is conveniently OK here as we are multiplying both
+ * values.
+ */
+ if (rpf->interlaced)
+ pstride *= 2;
+
vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_PSTRIDE, pstride);
/* Format */
@@ -104,6 +126,9 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
top = compose->top;
}
+ if (rpf->interlaced)
+ top /= 2;
+
vsp1_rpf_write(rpf, dlb, VI6_RPF_LOC,
(left << VI6_RPF_LOC_HCOORD_SHIFT) |
(top << VI6_RPF_LOC_VCOORD_SHIFT));
@@ -173,6 +198,31 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
}
+static void vsp1_rpf_configure_autofld(struct vsp1_rwpf *rpf,
+ struct vsp1_dl_ext_cmd *cmd)
+{
+ const struct v4l2_pix_format_mplane *format = &rpf->format;
+ struct vsp1_extcmd_auto_fld_body *auto_fld = cmd->data;
+ u32 offset_y, offset_c;
+
+ /* Re-index our auto_fld to match the current RPF */
+ auto_fld = &auto_fld[rpf->entity.index];
+
+ auto_fld->top_y0 = rpf->mem.addr[0];
+ auto_fld->top_c0 = rpf->mem.addr[1];
+ auto_fld->top_c1 = rpf->mem.addr[2];
+
+ offset_y = format->plane_fmt[0].bytesperline;
+ offset_c = format->plane_fmt[1].bytesperline;
+
+ auto_fld->bottom_y0 = rpf->mem.addr[0] + offset_y;
+ auto_fld->bottom_c0 = rpf->mem.addr[1] + offset_c;
+ auto_fld->bottom_c1 = rpf->mem.addr[2] + offset_c;
+
+ cmd->flags |= VSP1_DL_EXT_AUTOFLD_INT;
+ cmd->flags |= BIT(16 + rpf->entity.index);
+}
+
static void rpf_configure_frame(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl,
@@ -182,6 +232,7 @@ static void rpf_configure_frame(struct vsp1_entity *entity,
struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev);
struct vsp1_rwpf_memory mem = rpf->mem;
struct vsp1_device *vsp1 = rpf->entity.vsp1;
+ struct vsp1_dl_ext_cmd *cmd;
const struct vsp1_format_info *fmtinfo = rpf->fmtinfo;
const struct v4l2_pix_format_mplane *format = &rpf->format;
struct v4l2_rect crop;
@@ -220,6 +271,11 @@ static void rpf_configure_frame(struct vsp1_entity *entity,
crop.left += pipe->partition->rpf.left;
}
+ if (rpf->interlaced) {
+ crop.height = round_down(crop.height / 2, fmtinfo->vsub);
+ crop.top = round_down(crop.top / 2, fmtinfo->vsub);
+ }
+
vsp1_rpf_write(rpf, dlb, VI6_RPF_SRC_BSIZE,
(crop.width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) |
(crop.height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT));
@@ -248,11 +304,21 @@ static void rpf_configure_frame(struct vsp1_entity *entity,
fmtinfo->swap_uv)
swap(mem.addr[1], mem.addr[2]);
- vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
- vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
- vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
+ /*
+ * Interlaced pipelines will use the extended pre-cmd to process
+ * SRCM_ADDR_{Y,C0,C1}
+ */
+ if (rpf->interlaced) {
+ cmd = vsp1_dlm_get_autofld_cmd(dl);
+ vsp1_rpf_configure_autofld(rpf, cmd);
+ } else {
+ vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
+ vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
+ vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
+ }
}
+
static void rpf_partition(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_partition *partition,
@@ -47,6 +47,7 @@ struct vsp1_rwpf {
struct v4l2_pix_format_mplane format;
const struct vsp1_format_info *fmtinfo;
+ bool interlaced;
unsigned int bru_input;
unsigned int alpha;
@@ -49,6 +49,7 @@ struct vsp1_du_atomic_config {
struct v4l2_rect dst;
unsigned int alpha;
unsigned int zpos;
+ bool interlaced;
};
void vsp1_du_atomic_begin(struct device *dev, unsigned int pipe_index);
Calculate the top and bottom fields for the interlaced frames and utilise the extended display list command feature to implement the auto-field operations. This allows the DU to update the VSP2 registers dynamically based upon the currently processing field. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> --- v2: - fix erroneous BIT value which enabled interlaced - fix field handling at frame_end interrupt drivers/media/platform/vsp1/vsp1_dl.c | 10 ++++- drivers/media/platform/vsp1/vsp1_drm.c | 11 ++++- drivers/media/platform/vsp1/vsp1_regs.h | 1 +- drivers/media/platform/vsp1/vsp1_rpf.c | 72 ++++++++++++++++++++++++-- drivers/media/platform/vsp1/vsp1_rwpf.h | 1 +- include/media/vsp1.h | 1 +- 6 files changed, 93 insertions(+), 3 deletions(-)