@@ -38,6 +38,9 @@
#include "drm_edid.h"
#include "drm_fourcc.h"
+static int drm_mode_set_obj_prop(struct drm_mode_object *obj,
+ void *state, struct drm_property *property, uint64_t value);
+
/* Avoid boilerplate. I'm tired of typing. */
#define DRM_ENUM_NAME_FN(fnname, list) \
char *fnname(int val) \
@@ -380,11 +383,19 @@ EXPORT_SYMBOL(drm_framebuffer_cleanup);
void drm_framebuffer_remove(struct drm_framebuffer *fb)
{
struct drm_device *dev = fb->dev;
+ struct drm_mode_config *config = &dev->mode_config;
struct drm_crtc *crtc;
struct drm_plane *plane;
struct drm_mode_set set;
+ void *state;
int ret;
+ state = dev->driver->atomic_begin(dev, NULL);
+ if (IS_ERR(state)) {
+ DRM_ERROR("failed to disable crtc and/or plane when fb was deleted\n");
+ return;
+ }
+
/* remove from any CRTC */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (crtc->fb == fb) {
@@ -401,15 +412,19 @@ void drm_framebuffer_remove(struct drm_framebuffer *fb)
list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
if (plane->fb == fb) {
/* should turn off the crtc */
- ret = plane->funcs->disable_plane(plane);
- if (ret)
- DRM_ERROR("failed to disable plane with busy fb\n");
- /* disconnect the plane from the fb and crtc: */
- plane->fb = NULL;
- plane->crtc = NULL;
+ drm_mode_plane_set_obj_prop(plane, state, config->prop_crtc_id, 0);
+ drm_mode_plane_set_obj_prop(plane, state, config->prop_fb_id, 0);
}
}
+ /* just disabling stuff shouldn't fail, hopefully: */
+ if(dev->driver->atomic_check(dev, state))
+ DRM_ERROR("failed to disable crtc and/or plane when fb was deleted\n");
+ else
+ dev->driver->atomic_commit(dev, state, NULL);
+
+ dev->driver->atomic_end(dev, state);
+
list_del(&fb->filp_head);
drm_framebuffer_unreference(fb);
@@ -663,6 +678,7 @@ int drm_plane_init(struct drm_device *dev, struct drm_plane *plane,
const uint32_t *formats, uint32_t format_count,
bool priv)
{
+ struct drm_mode_config *config = &dev->mode_config;
int ret;
mutex_lock(&dev->mode_config.mutex);
@@ -699,6 +715,17 @@ int drm_plane_init(struct drm_device *dev, struct drm_plane *plane,
INIT_LIST_HEAD(&plane->head);
}
+ drm_object_attach_property(&plane->base, config->prop_fb_id, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_id, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_x, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_y, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_w, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_h, 0);
+ drm_object_attach_property(&plane->base, config->prop_src_x, 0);
+ drm_object_attach_property(&plane->base, config->prop_src_y, 0);
+ drm_object_attach_property(&plane->base, config->prop_src_w, 0);
+ drm_object_attach_property(&plane->base, config->prop_src_h, 0);
+
out:
mutex_unlock(&dev->mode_config.mutex);
@@ -772,23 +799,91 @@ void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode)
}
EXPORT_SYMBOL(drm_mode_destroy);
-static int drm_mode_create_standard_connector_properties(struct drm_device *dev)
+static int drm_mode_create_standard_properties(struct drm_device *dev)
{
- struct drm_property *edid;
- struct drm_property *dpms;
+ struct drm_property *prop;
/*
* Standard properties (apply to all connectors)
*/
- edid = drm_property_create(dev, DRM_MODE_PROP_BLOB |
+ prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
DRM_MODE_PROP_IMMUTABLE,
"EDID", 0);
- dev->mode_config.edid_property = edid;
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.edid_property = prop;
- dpms = drm_property_create_enum(dev, 0,
+ prop = drm_property_create_enum(dev, 0,
"DPMS", drm_dpms_enum_list,
ARRAY_SIZE(drm_dpms_enum_list));
- dev->mode_config.dpms_property = dpms;
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.dpms_property = prop;
+
+
+ /* TODO we need the driver to control which of these are dynamic
+ * and which are not.. or maybe we should just set all to zero
+ * and let the individual drivers frob the prop->flags for the
+ * properties they can support dynamic changes on..
+ */
+
+ prop = drm_property_create_range(dev, DRM_MODE_PROP_DYNAMIC,
+ "src_x", 0, UINT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_src_x = prop;
+
+ prop = drm_property_create_range(dev, DRM_MODE_PROP_DYNAMIC,
+ "src_y", 0, UINT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_src_y = prop;
+
+ prop = drm_property_create_range(dev, 0, "src_w", 0, UINT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_src_w = prop;
+
+ prop = drm_property_create_range(dev, 0, "src_h", 0, UINT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_src_h = prop;
+
+ prop = drm_property_create_range(dev,
+ DRM_MODE_PROP_DYNAMIC | DRM_MODE_PROP_SIGNED,
+ "crtc_x", I642U64(INT_MIN), I642U64(INT_MAX));
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_crtc_x = prop;
+
+ prop = drm_property_create_range(dev,
+ DRM_MODE_PROP_DYNAMIC | DRM_MODE_PROP_SIGNED,
+ "crtc_y", I642U64(INT_MIN), I642U64(INT_MAX));
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_crtc_y = prop;
+
+ prop = drm_property_create_range(dev, 0, "crtc_w", 0, INT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_crtc_w = prop;
+
+ prop = drm_property_create_range(dev, 0, "crtc_h", 0, INT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_crtc_h = prop;
+
+ prop = drm_property_create_object(dev, DRM_MODE_PROP_DYNAMIC,
+ "fb", DRM_MODE_OBJECT_FB);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_fb_id = prop;
+
+ prop = drm_property_create_object(dev, 0,
+ "crtc", DRM_MODE_OBJECT_CRTC);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_crtc_id = prop;
return 0;
}
@@ -1003,7 +1098,7 @@ void drm_mode_config_init(struct drm_device *dev)
idr_init(&dev->mode_config.crtc_idr);
mutex_lock(&dev->mode_config.mutex);
- drm_mode_create_standard_connector_properties(dev);
+ drm_mode_create_standard_properties(dev);
mutex_unlock(&dev->mode_config.mutex);
/* Just to be sure */
@@ -1750,116 +1845,71 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_set_plane *plane_req = data;
+ struct drm_mode_config *config = &dev->mode_config;
struct drm_mode_object *obj;
- struct drm_plane *plane;
- struct drm_crtc *crtc;
- struct drm_framebuffer *fb;
+ void *state;
int ret = 0;
- unsigned int fb_width, fb_height;
- int i;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
mutex_lock(&dev->mode_config.mutex);
- /*
- * First, find the plane, crtc, and fb objects. If not available,
- * we don't bother to call the driver.
- */
- obj = drm_mode_object_find(dev, plane_req->plane_id,
- DRM_MODE_OBJECT_PLANE);
- if (!obj) {
- DRM_DEBUG_KMS("Unknown plane ID %d\n",
- plane_req->plane_id);
- ret = -ENOENT;
- goto out;
- }
- plane = obj_to_plane(obj);
-
- /* No fb means shut it down */
- if (!plane_req->fb_id) {
- plane->funcs->disable_plane(plane);
- plane->crtc = NULL;
- plane->fb = NULL;
- goto out;
- }
-
obj = drm_mode_object_find(dev, plane_req->crtc_id,
DRM_MODE_OBJECT_CRTC);
if (!obj) {
- DRM_DEBUG_KMS("Unknown crtc ID %d\n",
+ DRM_DEBUG_KMS("Unknown CRTC ID %d\n",
plane_req->crtc_id);
ret = -ENOENT;
- goto out;
+ goto out_unlock;
}
- crtc = obj_to_crtc(obj);
- obj = drm_mode_object_find(dev, plane_req->fb_id,
- DRM_MODE_OBJECT_FB);
- if (!obj) {
- DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",
- plane_req->fb_id);
- ret = -ENOENT;
- goto out;
+ state = dev->driver->atomic_begin(dev, obj_to_crtc(obj));
+ if (IS_ERR(state)) {
+ ret = PTR_ERR(state);
+ goto out_unlock;
}
- fb = obj_to_fb(obj);
- /* Check whether this plane supports the fb pixel format. */
- for (i = 0; i < plane->format_count; i++)
- if (fb->pixel_format == plane->format_types[i])
- break;
- if (i == plane->format_count) {
- DRM_DEBUG_KMS("Invalid pixel format 0x%08x\n", fb->pixel_format);
- ret = -EINVAL;
+ obj = drm_mode_object_find(dev, plane_req->plane_id,
+ DRM_MODE_OBJECT_PLANE);
+ if (!obj) {
+ DRM_DEBUG_KMS("Unknown plane ID %d\n",
+ plane_req->plane_id);
+ ret = -ENOENT;
goto out;
}
- fb_width = fb->width << 16;
- fb_height = fb->height << 16;
-
- /* Make sure source coordinates are inside the fb. */
- if (plane_req->src_w > fb_width ||
- plane_req->src_x > fb_width - plane_req->src_w ||
- plane_req->src_h > fb_height ||
- plane_req->src_y > fb_height - plane_req->src_h) {
- DRM_DEBUG_KMS("Invalid source coordinates "
- "%u.%06ux%u.%06u+%u.%06u+%u.%06u\n",
- plane_req->src_w >> 16,
- ((plane_req->src_w & 0xffff) * 15625) >> 10,
- plane_req->src_h >> 16,
- ((plane_req->src_h & 0xffff) * 15625) >> 10,
- plane_req->src_x >> 16,
- ((plane_req->src_x & 0xffff) * 15625) >> 10,
- plane_req->src_y >> 16,
- ((plane_req->src_y & 0xffff) * 15625) >> 10);
- ret = -ENOSPC;
- goto out;
- }
+ ret =
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_crtc_id, plane_req->crtc_id) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_fb_id, plane_req->fb_id) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_crtc_x, I642U64(plane_req->crtc_x)) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_crtc_y, I642U64(plane_req->crtc_y)) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_crtc_w, plane_req->crtc_w) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_crtc_h, plane_req->crtc_h) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_src_w, plane_req->src_w) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_src_h, plane_req->src_h) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_src_x, plane_req->src_x) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_src_y, plane_req->src_y) ||
+ dev->driver->atomic_check(dev, state);
- /* Give drivers some help against integer overflows */
- if (plane_req->crtc_w > INT_MAX ||
- plane_req->crtc_x > INT_MAX - (int32_t) plane_req->crtc_w ||
- plane_req->crtc_h > INT_MAX ||
- plane_req->crtc_y > INT_MAX - (int32_t) plane_req->crtc_h) {
- DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
- plane_req->crtc_w, plane_req->crtc_h,
- plane_req->crtc_x, plane_req->crtc_y);
- ret = -ERANGE;
+ if (ret)
goto out;
- }
- ret = plane->funcs->update_plane(plane, crtc, fb,
- plane_req->crtc_x, plane_req->crtc_y,
- plane_req->crtc_w, plane_req->crtc_h,
- plane_req->src_x, plane_req->src_y,
- plane_req->src_w, plane_req->src_h);
- if (!ret) {
- plane->crtc = crtc;
- plane->fb = fb;
- }
+ ret = dev->driver->atomic_commit(dev, state, NULL);
out:
+ dev->driver->atomic_end(dev, state);
+out_unlock:
mutex_unlock(&dev->mode_config.mutex);
return ret;
@@ -3262,7 +3312,7 @@ int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv);
}
-static int drm_mode_connector_set_obj_prop(struct drm_connector *connector,
+int drm_mode_connector_set_obj_prop(struct drm_connector *connector,
void *state, struct drm_property *property,
uint64_t value)
{
@@ -3283,8 +3333,9 @@ static int drm_mode_connector_set_obj_prop(struct drm_connector *connector,
return ret;
}
+EXPORT_SYMBOL(drm_mode_connector_set_obj_prop);
-static int drm_mode_crtc_set_obj_prop(struct drm_crtc *crtc,
+int drm_mode_crtc_set_obj_prop(struct drm_crtc *crtc,
void *state, struct drm_property *property,
uint64_t value)
{
@@ -3298,8 +3349,9 @@ static int drm_mode_crtc_set_obj_prop(struct drm_crtc *crtc,
return ret;
}
+EXPORT_SYMBOL(drm_mode_crtc_set_obj_prop);
-static int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
+int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
void *state, struct drm_property *property,
uint64_t value)
{
@@ -3313,6 +3365,7 @@ static int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
return ret;
}
+EXPORT_SYMBOL(drm_mode_plane_set_obj_prop);
static int drm_mode_set_obj_prop(struct drm_mode_object *obj,
void *state, struct drm_property *property, uint64_t value)
@@ -634,13 +634,6 @@ struct drm_connector {
* @set_property: called when a property is changed
*/
struct drm_plane_funcs {
- int (*update_plane)(struct drm_plane *plane,
- struct drm_crtc *crtc, struct drm_framebuffer *fb,
- int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h);
- int (*disable_plane)(struct drm_plane *plane);
void (*destroy)(struct drm_plane *plane);
int (*set_property)(struct drm_plane *plane, void *state,
@@ -810,8 +803,20 @@ struct drm_mode_config {
bool poll_enabled;
struct delayed_work output_poll_work;
- /* pointers to standard properties */
+ /* just so blob properties can always be in a list: */
struct list_head property_blob_list;
+
+ /* pointers to standard properties */
+ struct drm_property *prop_src_x;
+ struct drm_property *prop_src_y;
+ struct drm_property *prop_src_w;
+ struct drm_property *prop_src_h;
+ struct drm_property *prop_crtc_x;
+ struct drm_property *prop_crtc_y;
+ struct drm_property *prop_crtc_w;
+ struct drm_property *prop_crtc_h;
+ struct drm_property *prop_fb_id;
+ struct drm_property *prop_crtc_id;
struct drm_property *edid_property;
struct drm_property *dpms_property;
@@ -947,6 +952,17 @@ extern int drm_object_property_set_value(struct drm_mode_object *obj,
extern int drm_object_property_get_value(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t *value);
+
+int drm_mode_connector_set_obj_prop(struct drm_connector *connector,
+ void *state, struct drm_property *property,
+ uint64_t value);
+int drm_mode_crtc_set_obj_prop(struct drm_crtc *crtc,
+ void *state, struct drm_property *property,
+ uint64_t value);
+int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
+ void *state, struct drm_property *property,
+ uint64_t value);
+
extern int drm_framebuffer_init(struct drm_device *dev,
struct drm_framebuffer *fb,
const struct drm_framebuffer_funcs *funcs);
From: Rob Clark <rob@ti.com> Use atomic properties mechanism to set plane attributes. This by itself doesn't accomplish anything, but it avoids having multiple code paths to do the same thing when nuclear-pageflip and atomic- modeset are introduced. --- drivers/gpu/drm/drm_crtc.c | 257 ++++++++++++++++++++++++++------------------ include/drm/drm_crtc.h | 32 ++++-- 2 files changed, 179 insertions(+), 110 deletions(-)