@@ -13,6 +13,31 @@ Required properties:
b) pin number within the gpio controller.
c) optional flags and pull up/down.
+- hdmiphy-configs: following information about the hdmiphy config settings.
+ a) "nr-configs" specifies the number of pixel clocks supported.
+ b) "config<N>: config<N>" specifies the phy configuration settings,
+ where 'N' denotes the number of configuration, since every
+ pixel clock can have its unique configuration.
+ "pixel-clock" specifies the pixel clock
+ "conifig-de-emphasis-level" provides fine control of TMDS data
+ pre emphasis, below shown is example for
+ data de-emphasis register at address 0x145D0040.
+ hdmiphy@38[16] for bits[3:0] permitted values are in
+ the range of 760 mVdiff to 1400 mVdiff at 20mVdiff
+ increments for every LSB
+ hdmiphy@38[16] for bits[7:4] permitted values are in
+ the range of 0dB to -7.45dB at increments of -0.45dB
+ for every LSB.
+ "config-clock-level" provides fine control of TMDS data
+ amplitude for each channel,
+ for example if 0x145D005C is the address of clock level
+ register then,
+ hdmiphy@38[23] for bits [1:0] permitted values are in
+ the range of 0 mVdiff & 60 mVdiff for each channel at
+ increments 20 mVdiff of amplitude levels for every LSB,
+ hdmiphy@38[23] for bits [7:3] permitted values are in
+ the range of 790 and 1430 mV at 20mV increments for
+ every LSB.
Example:
hdmi {
@@ -20,4 +45,12 @@ Example:
reg = <0x14530000 0x100000>;
interrupts = <0 95 0>;
hpd-gpio = <&gpx3 7 1>;
+ hdmiphy-configs {
+ nr-configs = <1>;
+ config0: config0 {
+ pixel-clock = <25200000>;
+ config-de-emphasis-level = /bits/ 8 <0x26>;
+ config-clock-level = /bits/ 8 < 0x66>;
+ };
+ }
};
@@ -197,6 +197,9 @@ struct hdmi_context {
struct hdmi_resources res;
+ struct hdmiphy_config *confs;
+ int nr_confs;
+
int hpd_gpio;
enum hdmi_type type;
@@ -256,7 +259,7 @@ static const struct hdmiphy_config hdmiphy_v13_configs[] = {
},
};
-static const struct hdmiphy_config hdmiphy_v14_configs[] = {
+static struct hdmiphy_config hdmiphy_v14_configs[] = {
{
.pixel_clock = 25200000,
.conf = {
@@ -785,8 +788,8 @@ static int hdmi_find_phy_conf(struct hdmi_context *hdata, u32 pixel_clock)
confs = hdmiphy_v13_configs;
count = ARRAY_SIZE(hdmiphy_v13_configs);
} else if (hdata->type == HDMI_TYPE14) {
- confs = hdmiphy_v14_configs;
- count = ARRAY_SIZE(hdmiphy_v14_configs);
+ confs = hdata->confs;
+ count = hdata->nr_confs;
} else
return -EINVAL;
@@ -1415,7 +1418,7 @@ static void hdmiphy_conf_apply(struct hdmi_context *hdata)
if (hdata->type == HDMI_TYPE13)
hdmiphy_data = hdmiphy_v13_configs[i].conf;
else
- hdmiphy_data = hdmiphy_v14_configs[i].conf;
+ hdmiphy_data = hdata->confs[i].conf;
memcpy(buffer, hdmiphy_data, 32);
ret = i2c_master_send(hdata->hdmiphy_port, buffer, 32);
@@ -1894,6 +1897,63 @@ fail:
return -ENODEV;
}
+static int drm_hdmi_dt_parse_phy_conf(struct platform_device *pdev,
+ struct hdmi_context *hdata)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *dev_np = dev->of_node;
+ struct device_node *phy_conf, *cfg_np;
+ int i, pixel_clock = 0;
+
+ /* Initialize with default config */
+ hdata->confs = hdmiphy_v14_configs;
+ hdata->nr_confs = ARRAY_SIZE(hdmiphy_v14_configs);
+
+ phy_conf = of_find_node_by_name(dev_np, "hdmiphy-configs");
+ if (phy_conf == NULL) {
+ hdata->nr_confs = ARRAY_SIZE(hdmiphy_v14_configs);
+ DRM_ERROR("Did not find hdmiphy-configs node\n");
+ return -ENODEV;
+ }
+
+ for_each_child_of_node(phy_conf, cfg_np) {
+ if (!of_find_property(cfg_np, "pixel-clock", NULL))
+ continue;
+
+ if (of_property_read_u32(cfg_np, "pixel-clock",
+ &pixel_clock, 1)) {
+ DRM_ERROR("Failed to get pixel clock\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(hdmiphy_v14_configs); i++) {
+ if (hdata->confs[i].pixel_clock == pixel_clock)
+ /* Update the data de-emphasis and data level */
+ if (of_property_read_u8_array(cfg_np,
+ "config-de-emphasis-level",
+ &hdata->confs[i].conf[16], 1)) {
+ DRM_ERROR("Failed to get conf\n");
+ return -EINVAL;
+ }
+ if (of_property_read_u8_array(cfg_np,
+ "config-de-emphasis-level",
+ &hdata->confs[i].conf[16], 1)) {
+ DRM_ERROR("Failed to get conf\n");
+ return -EINVAL;
+ }
+ /* Update the clock level diff */
+ if (of_property_read_u8_array(cfg_np,
+ "config-clock-level",
+ &hdata->confs[i].conf[23], 1)) {
+ DRM_ERROR("Failed to get conf\n");
+ return -EINVAL;
+ }
+ }
+ }
+ return 0;
+
+}
+
static struct s5p_hdmi_platform_data *drm_hdmi_dt_parse_pdata
(struct device *dev)
{
@@ -2024,6 +2084,15 @@ static int hdmi_probe(struct platform_device *pdev)
goto err_hdmiphy;
}
+ /* get hdmiphy confs */
+ if (hdata->type == HDMI_TYPE14) {
+ ret = drm_hdmi_dt_parse_phy_conf(pdev, hdata);
+ if (ret) {
+ DRM_ERROR("failed to get user defined config,will use
+ default configs, eye diagram tests may fail\n");
+ }
+ }
+
hdmi_display.dev = dev;
exynos_drm_display_register(&hdmi_display);
This patch adds dt support to hdmiphy config settings as it is board specific and depends on the signal pattern of board. Signed-off-by: Shirish S <s.shirish@samsung.com> --- .../devicetree/bindings/video/exynos_hdmi.txt | 33 +++++++++ drivers/gpu/drm/exynos/exynos_hdmi.c | 77 +++++++++++++++++++- 2 files changed, 106 insertions(+), 4 deletions(-)