| Message ID | 1393590016-9361-8-git-send-email-tomi.valkeinen@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 28/02/14 15:38, Philipp Zabel wrote: > Hi Tomi, > > Am Freitag, den 28.02.2014, 14:20 +0200 schrieb Tomi Valkeinen: >> Add DT binding documentation for Sony acx565akm panel >> >> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> >> Reviewed-by: Sebastian Reichel <sre@debian.org> >> Reviewed-by: Archit Taneja <archit@ti.com> >> --- >> .../devicetree/bindings/video/sony,acx565akm.txt | 28 ++++++++++++++++++++++ >> 1 file changed, 28 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/video/sony,acx565akm.txt >> >> diff --git a/Documentation/devicetree/bindings/video/sony,acx565akm.txt b/Documentation/devicetree/bindings/video/sony,acx565akm.txt >> new file mode 100644 >> index 000000000000..cd9cfdf7e3fe >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/video/sony,acx565akm.txt >> @@ -0,0 +1,28 @@ >> +Sony ACX565AKM SDI Panel >> +======================== >> + >> +Required properties: >> +- compatible: "sony,acx565akm" >> + >> +Optional properties: >> +- label: a symbolic name for the panel >> +- gpios: panel reset gpio > > please let's call this reset-gpios. Yes, I'll change this and the tfp410 one. Tomi
diff --git a/Documentation/devicetree/bindings/video/sony,acx565akm.txt b/Documentation/devicetree/bindings/video/sony,acx565akm.txt new file mode 100644 index 000000000000..cd9cfdf7e3fe --- /dev/null +++ b/Documentation/devicetree/bindings/video/sony,acx565akm.txt @@ -0,0 +1,28 @@ +Sony ACX565AKM SDI Panel +======================== + +Required properties: +- compatible: "sony,acx565akm" + +Optional properties: +- label: a symbolic name for the panel +- gpios: panel reset gpio + +Required nodes: +- Video port for SDI input + +Example +------- + +acx565akm@2 { + compatible = "sony,acx565akm"; + spi-max-frequency = <6000000>; + reg = <2>; + + label = "lcd"; + gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */ + + lcd_in: endpoint { + remote-endpoint = <&sdi_out>; + }; +};