new file mode 100644
@@ -0,0 +1,211 @@
+Texas Instruments OMAP Display Subsystem
+========================================
+
+Generic Description
+-------------------
+
+This document is a generic description of the OMAP Display Subsystem bindings.
+Binding details for each OMAP SoC version are described in respective binding
+documentation.
+
+The OMAP Display Subsystem (DSS) hardware consists of DSS Core, DISPC module and
+a number of encoder modules. All DSS versions contain DSS Core and DISPC, but
+the encoder modules vary.
+
+The DSS Core is the parent of the other DSS modules, and manages clock routing,
+integration to the SoC, etc.
+
+DISPC is the display controller, which reads pixels from the memory and outputs
+a RGB pixel stream to encoders.
+
+The encoder modules encode the received RGB pixel stream to a video output like
+HDMI, MIPI DPI, etc.
+
+Video Ports
+-----------
+
+The DSS Core and the encoders have video port outputs. The structure of the
+video ports is described in Documentation/devicetree/bindings/video/video-
+ports.txt, and the properties for the ports and endpoints for each encoder are
+described in the SoC's DSS binding documentation.
+
+The video ports are used to describe the connections to external hardware, like
+panels or external encoders.
+
+Aliases
+-------
+
+The board dts file may define aliases for displays to assign "displayX" style
+name for each display. If no aliases are defined, a semi-random number is used
+for the display.
+
+Example
+-------
+
+A shortened example of the DSS description for OMAP4, with non-relevant parts
+removed, defined in omap4.dtsi:
+
+dss: dss@58000000 {
+ compatible = "ti,omap4-dss";
+ reg = <0x58000000 0x80>;
+ status = "disabled";
+ ti,hwmods = "dss_core";
+ clocks = <&dss_dss_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dispc@58001000 {
+ compatible = "ti,omap4-dispc";
+ reg = <0x58001000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "dss_dispc";
+ clocks = <&dss_dss_clk>;
+ clock-names = "fck";
+ };
+
+ hdmi: encoder@58006000 {
+ compatible = "ti,omap4-hdmi";
+ reg = <0x58006000 0x200>,
+ <0x58006200 0x100>,
+ <0x58006300 0x100>,
+ <0x58006400 0x1000>;
+ reg-names = "wp", "pll", "phy", "core";
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ ti,hwmods = "dss_hdmi";
+ clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+ clock-names = "fck", "sys_clk";
+ };
+};
+
+A shortened example of the board description for OMAP4 Panda board, defined in
+omap4-panda.dts.
+
+The Panda board has a DVI and a HDMI connector, and the board contains a TFP410
+chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level
+shifter). The video pipelines for the connectors are formed as follows:
+
+DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector
+OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector
+
+/ {
+ aliases {
+ display0 = &dvi0;
+ display1 = &hdmi0;
+ };
+
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* 0, power-down */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tfp410_pins>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ i2c-bus = <&i2c3>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ tpd12s015: encoder@1 {
+ compatible = "ti,tpd12s015";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpd12s015_pins>;
+
+ gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
+ <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
+ <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint@0 {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint@0 {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ hdmi0: connector@1 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&hdmi {
+ status = "ok";
+ vdda-supply = <&vdac>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_hdmi_pins>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,54 @@
+Texas Instruments OMAP2 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap2-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+
+Optional nodes:
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap2-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap2-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap2-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+
+VENC Endpoint required properties:
+
+Required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
new file mode 100644
@@ -0,0 +1,83 @@
+Texas Instruments OMAP3 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap3-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video ports:
+ - Port 0: DPI output
+ - Port 1: SDI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+SDI Endpoint required properties:
+- datapairs: number of datapairs used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap3-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap3-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap3-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap3-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+ DATA1+, DATA1-, ...
new file mode 100644
@@ -0,0 +1,111 @@
+Texas Instruments OMAP4 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap4-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: RFBI, VENC, DSI, HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap4-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap4-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+Optional nodes:
+- Video port for RFBI output
+- RFBI controlled peripherals
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap4-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video port for VENC output
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap4-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1" or "dss_dsi2"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for DSI output
+- DSI controlled peripherals
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+ DATA1+, DATA1-, ...
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,omap4-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+ 'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output