diff mbox

[RESEND] drm: Add 800x600 (SVGA) screen resolution to the built-in EDIDs

Message ID 1398414854-30649-1-git-send-email-daniel.thompson@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Daniel Thompson April 25, 2014, 8:34 a.m. UTC 
The 800x600 (SVGA) screen resolution was lacking in the set of
built-in selectable EDID screen resolutions that can be used to
repair misbehaving monitor firmware.

This patch adds the related data set and expands the documentation.
Note that the SVGA bit occupies a different byte to all the existing
users of the established timing bits forcing a rework of the
ESTABLISHED_TIMINGS_BITS macro.

Tested new EDID on an aged (and misbehaving) industrial LCD panel;
existing EDIDs still pass edid-decode's checksum checks.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
---
 Documentation/EDID/1024x768.S   |  2 +-
 Documentation/EDID/1280x1024.S  |  2 +-
 Documentation/EDID/1600x1200.S  |  2 +-
 Documentation/EDID/1680x1050.S  |  2 +-
 Documentation/EDID/1920x1080.S  |  2 +-
 Documentation/EDID/800x600.S    | 41 +++++++++++++++++++++++++++++++++++++++++
 Documentation/EDID/HOWTO.txt    |  2 +-
 Documentation/EDID/edid.S       | 17 ++++++++++++++---
 drivers/gpu/drm/drm_edid_load.c | 21 ++++++++++++++++++++-
 9 files changed, 81 insertions(+), 10 deletions(-)
 create mode 100644 Documentation/EDID/800x600.S

Comments

Alex Deucher April 28, 2014, 2:23 p.m. UTC | #1 
On Fri, Apr 25, 2014 at 4:34 AM, Daniel Thompson
<daniel.thompson@linaro.org> wrote:
> The 800x600 (SVGA) screen resolution was lacking in the set of
> built-in selectable EDID screen resolutions that can be used to
> repair misbehaving monitor firmware.
>
> This patch adds the related data set and expands the documentation.
> Note that the SVGA bit occupies a different byte to all the existing
> users of the established timing bits forcing a rework of the
> ESTABLISHED_TIMINGS_BITS macro.
>
> Tested new EDID on an aged (and misbehaving) industrial LCD panel;
> existing EDIDs still pass edid-decode's checksum checks.
>
> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

> ---
>  Documentation/EDID/1024x768.S   |  2 +-
>  Documentation/EDID/1280x1024.S  |  2 +-
>  Documentation/EDID/1600x1200.S  |  2 +-
>  Documentation/EDID/1680x1050.S  |  2 +-
>  Documentation/EDID/1920x1080.S  |  2 +-
>  Documentation/EDID/800x600.S    | 41 +++++++++++++++++++++++++++++++++++++++++
>  Documentation/EDID/HOWTO.txt    |  2 +-
>  Documentation/EDID/edid.S       | 17 ++++++++++++++---
>  drivers/gpu/drm/drm_edid_load.c | 21 ++++++++++++++++++++-
>  9 files changed, 81 insertions(+), 10 deletions(-)
>  create mode 100644 Documentation/EDID/800x600.S
>
> diff --git a/Documentation/EDID/1024x768.S b/Documentation/EDID/1024x768.S
> index 4b486fe..6f3e4b7 100644
> --- a/Documentation/EDID/1024x768.S
> +++ b/Documentation/EDID/1024x768.S
> @@ -36,7 +36,7 @@
>  #define DPI 72
>  #define VFREQ 60 /* Hz */
>  #define TIMING_NAME "Linux XGA"
> -#define ESTABLISHED_TIMINGS_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */
> +#define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */
>  #define HSYNC_POL 0
>  #define VSYNC_POL 0
>  #define CRC 0x55
> diff --git a/Documentation/EDID/1280x1024.S b/Documentation/EDID/1280x1024.S
> index a2799fe..bd9bef2 100644
> --- a/Documentation/EDID/1280x1024.S
> +++ b/Documentation/EDID/1280x1024.S
> @@ -36,7 +36,7 @@
>  #define DPI 72
>  #define VFREQ 60 /* Hz */
>  #define TIMING_NAME "Linux SXGA"
> -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
> +/* No ESTABLISHED_TIMINGx_BITS */
>  #define HSYNC_POL 1
>  #define VSYNC_POL 1
>  #define CRC 0xa0
> diff --git a/Documentation/EDID/1600x1200.S b/Documentation/EDID/1600x1200.S
> index 0ded64c..a45101c 100644
> --- a/Documentation/EDID/1600x1200.S
> +++ b/Documentation/EDID/1600x1200.S
> @@ -36,7 +36,7 @@
>  #define DPI 72
>  #define VFREQ 60 /* Hz */
>  #define TIMING_NAME "Linux UXGA"
> -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
> +/* No ESTABLISHED_TIMINGx_BITS */
>  #define HSYNC_POL 1
>  #define VSYNC_POL 1
>  #define CRC 0x9d
> diff --git a/Documentation/EDID/1680x1050.S b/Documentation/EDID/1680x1050.S
> index 96f67ca..b0d7c69 100644
> --- a/Documentation/EDID/1680x1050.S
> +++ b/Documentation/EDID/1680x1050.S
> @@ -36,7 +36,7 @@
>  #define DPI 96
>  #define VFREQ 60 /* Hz */
>  #define TIMING_NAME "Linux WSXGA"
> -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
> +/* No ESTABLISHED_TIMINGx_BITS */
>  #define HSYNC_POL 1
>  #define VSYNC_POL 1
>  #define CRC 0x26
> diff --git a/Documentation/EDID/1920x1080.S b/Documentation/EDID/1920x1080.S
> index 36ed5d5..3084355e 100644
> --- a/Documentation/EDID/1920x1080.S
> +++ b/Documentation/EDID/1920x1080.S
> @@ -36,7 +36,7 @@
>  #define DPI 96
>  #define VFREQ 60 /* Hz */
>  #define TIMING_NAME "Linux FHD"
> -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
> +/* No ESTABLISHED_TIMINGx_BITS */
>  #define HSYNC_POL 1
>  #define VSYNC_POL 1
>  #define CRC 0x05
> diff --git a/Documentation/EDID/800x600.S b/Documentation/EDID/800x600.S
> new file mode 100644
> index 0000000..6644e26
> --- /dev/null
> +++ b/Documentation/EDID/800x600.S
> @@ -0,0 +1,41 @@
> +/*
> +   800x600.S: EDID data set for standard 800x600 60 Hz monitor
> +
> +   Copyright (C) 2011 Carsten Emde <C.Emde@osadl.org>
> +   Copyright (C) 2014 Linaro Limited
> +
> +   This program is free software; you can redistribute it and/or
> +   modify it under the terms of the GNU General Public License
> +   as published by the Free Software Foundation; either version 2
> +   of the License, or (at your option) any later version.
> +
> +   This program is distributed in the hope that it will be useful,
> +   but WITHOUT ANY WARRANTY; without even the implied warranty of
> +   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +   GNU General Public License for more details.
> +*/
> +
> +/* EDID */
> +#define VERSION 1
> +#define REVISION 3
> +
> +/* Display */
> +#define CLOCK 40000 /* kHz */
> +#define XPIX 800
> +#define YPIX 600
> +#define XY_RATIO XY_RATIO_4_3
> +#define XBLANK 256
> +#define YBLANK 28
> +#define XOFFSET 40
> +#define XPULSE 128
> +#define YOFFSET (63+1)
> +#define YPULSE (63+4)
> +#define DPI 72
> +#define VFREQ 60 /* Hz */
> +#define TIMING_NAME "Linux SVGA"
> +#define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */
> +#define HSYNC_POL 1
> +#define VSYNC_POL 1
> +#define CRC 0xc2
> +
> +#include "edid.S"
> diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt
> index 7146db1..835db33 100644
> --- a/Documentation/EDID/HOWTO.txt
> +++ b/Documentation/EDID/HOWTO.txt
> @@ -18,7 +18,7 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an
>  individually prepared or corrected EDID data set in the /lib/firmware
>  directory from where it is loaded via the firmware interface. The code
>  (see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for
> -commonly used screen resolutions (1024x768, 1280x1024, 1600x1200,
> +commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200,
>  1680x1050, 1920x1080) as binary blobs, but the kernel source tree does
>  not contain code to create these data. In order to elucidate the origin
>  of the built-in binary EDID blobs and to facilitate the creation of
> diff --git a/Documentation/EDID/edid.S b/Documentation/EDID/edid.S
> index ea97ae2..7ac0327 100644
> --- a/Documentation/EDID/edid.S
> +++ b/Documentation/EDID/edid.S
> @@ -33,6 +33,17 @@
>  #define XY_RATIO_5_4   0b10
>  #define XY_RATIO_16_9  0b11
>
> +/* Provide defaults for the timing bits */
> +#ifndef ESTABLISHED_TIMING1_BITS
> +#define ESTABLISHED_TIMING1_BITS 0x00
> +#endif
> +#ifndef ESTABLISHED_TIMING2_BITS
> +#define ESTABLISHED_TIMING2_BITS 0x00
> +#endif
> +#ifndef ESTABLISHED_TIMING3_BITS
> +#define ESTABLISHED_TIMING3_BITS 0x00
> +#endif
> +
>  #define mfgname2id(v1,v2,v3) \
>         ((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f))
>  #define swap16(v1) ((v1>>8)+((v1&0xff)<<8))
> @@ -139,7 +150,7 @@ white_x_y_msb:      .byte   0x50,0x54
>     Bit 2       640x480 @ 75 Hz
>     Bit 1       800x600 @ 56 Hz
>     Bit 0       800x600 @ 60 Hz */
> -estbl_timing1: .byte   0x00
> +estbl_timing1: .byte   ESTABLISHED_TIMING1_BITS
>
>  /* Bit 7       800x600 @ 72 Hz
>     Bit 6       800x600 @ 75 Hz
> @@ -149,11 +160,11 @@ estbl_timing1:    .byte   0x00
>     Bit 2       1024x768 @ 72 Hz
>     Bit 1       1024x768 @ 75 Hz
>     Bit 0       1280x1024 @ 75 Hz */
> -estbl_timing2: .byte   ESTABLISHED_TIMINGS_BITS
> +estbl_timing2: .byte   ESTABLISHED_TIMING2_BITS
>
>  /* Bit 7       1152x870 @ 75 Hz (Apple Macintosh II)
>     Bits 6-0    Other manufacturer-specific display mod */
> -estbl_timing3: .byte   0x00
> +estbl_timing3: .byte   ESTABLISHED_TIMING3_BITS
>
>  /* Standard timing */
>  /* X resolution, less 31, divided by 8 (256-2288 pixels) */
> diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c
> index 1b4c7a5..6e09f61 100644
> --- a/drivers/gpu/drm/drm_edid_load.c
> +++ b/drivers/gpu/drm/drm_edid_load.c
> @@ -31,8 +31,9 @@ module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644);
>  MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob "
>         "from built-in data or /lib/firmware instead. ");
>
> -#define GENERIC_EDIDS 5
> +#define GENERIC_EDIDS 6
>  static const char *generic_edid_name[GENERIC_EDIDS] = {
> +       "edid/800x600.bin",
>         "edid/1024x768.bin",
>         "edid/1280x1024.bin",
>         "edid/1600x1200.bin",
> @@ -44,6 +45,24 @@ static const u8 generic_edid[GENERIC_EDIDS][128] = {
>         {
>         0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
>         0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +       0x05, 0x16, 0x01, 0x03, 0x6d, 0x1b, 0x14, 0x78,
> +       0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25,
> +       0x20, 0x50, 0x54, 0x01, 0x00, 0x00, 0x45, 0x40,
> +       0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
> +       0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0xa0, 0x0f,
> +       0x20, 0x00, 0x31, 0x58, 0x1c, 0x20, 0x28, 0x80,
> +       0x14, 0x00, 0x15, 0xd0, 0x10, 0x00, 0x00, 0x1e,
> +       0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e,
> +       0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20,
> +       0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b,
> +       0x3d, 0x24, 0x26, 0x05, 0x00, 0x0a, 0x20, 0x20,
> +       0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc,
> +       0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x53,
> +       0x56, 0x47, 0x41, 0x0a, 0x20, 0x20, 0x00, 0xc2,
> +       },
> +       {
> +       0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
> +       0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>         0x05, 0x16, 0x01, 0x03, 0x6d, 0x23, 0x1a, 0x78,
>         0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25,
>         0x20, 0x50, 0x54, 0x00, 0x08, 0x00, 0x61, 0x40,
> --
> 1.9.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
diff mbox

Patch

diff --git a/Documentation/EDID/1024x768.S b/Documentation/EDID/1024x768.S
index 4b486fe..6f3e4b7 100644
--- a/Documentation/EDID/1024x768.S
+++ b/Documentation/EDID/1024x768.S
@@ -36,7 +36,7 @@ 
 #define DPI 72
 #define VFREQ 60 /* Hz */
 #define TIMING_NAME "Linux XGA"
-#define ESTABLISHED_TIMINGS_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */
+#define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */
 #define HSYNC_POL 0
 #define VSYNC_POL 0
 #define CRC 0x55
diff --git a/Documentation/EDID/1280x1024.S b/Documentation/EDID/1280x1024.S
index a2799fe..bd9bef2 100644
--- a/Documentation/EDID/1280x1024.S
+++ b/Documentation/EDID/1280x1024.S
@@ -36,7 +36,7 @@ 
 #define DPI 72
 #define VFREQ 60 /* Hz */
 #define TIMING_NAME "Linux SXGA"
-#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
+/* No ESTABLISHED_TIMINGx_BITS */
 #define HSYNC_POL 1
 #define VSYNC_POL 1
 #define CRC 0xa0
diff --git a/Documentation/EDID/1600x1200.S b/Documentation/EDID/1600x1200.S
index 0ded64c..a45101c 100644
--- a/Documentation/EDID/1600x1200.S
+++ b/Documentation/EDID/1600x1200.S
@@ -36,7 +36,7 @@ 
 #define DPI 72
 #define VFREQ 60 /* Hz */
 #define TIMING_NAME "Linux UXGA"
-#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
+/* No ESTABLISHED_TIMINGx_BITS */
 #define HSYNC_POL 1
 #define VSYNC_POL 1
 #define CRC 0x9d
diff --git a/Documentation/EDID/1680x1050.S b/Documentation/EDID/1680x1050.S
index 96f67ca..b0d7c69 100644
--- a/Documentation/EDID/1680x1050.S
+++ b/Documentation/EDID/1680x1050.S
@@ -36,7 +36,7 @@ 
 #define DPI 96
 #define VFREQ 60 /* Hz */
 #define TIMING_NAME "Linux WSXGA"
-#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
+/* No ESTABLISHED_TIMINGx_BITS */
 #define HSYNC_POL 1
 #define VSYNC_POL 1
 #define CRC 0x26
diff --git a/Documentation/EDID/1920x1080.S b/Documentation/EDID/1920x1080.S
index 36ed5d5..3084355e 100644
--- a/Documentation/EDID/1920x1080.S
+++ b/Documentation/EDID/1920x1080.S
@@ -36,7 +36,7 @@ 
 #define DPI 96
 #define VFREQ 60 /* Hz */
 #define TIMING_NAME "Linux FHD"
-#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
+/* No ESTABLISHED_TIMINGx_BITS */
 #define HSYNC_POL 1
 #define VSYNC_POL 1
 #define CRC 0x05
diff --git a/Documentation/EDID/800x600.S b/Documentation/EDID/800x600.S
new file mode 100644
index 0000000..6644e26
--- /dev/null
+++ b/Documentation/EDID/800x600.S
@@ -0,0 +1,41 @@ 
+/*
+   800x600.S: EDID data set for standard 800x600 60 Hz monitor
+
+   Copyright (C) 2011 Carsten Emde <C.Emde@osadl.org>
+   Copyright (C) 2014 Linaro Limited
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 40000 /* kHz */
+#define XPIX 800
+#define YPIX 600
+#define XY_RATIO XY_RATIO_4_3
+#define XBLANK 256
+#define YBLANK 28
+#define XOFFSET 40
+#define XPULSE 128
+#define YOFFSET (63+1)
+#define YPULSE (63+4)
+#define DPI 72
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux SVGA"
+#define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+#define CRC 0xc2
+
+#include "edid.S"
diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt
index 7146db1..835db33 100644
--- a/Documentation/EDID/HOWTO.txt
+++ b/Documentation/EDID/HOWTO.txt
@@ -18,7 +18,7 @@  CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an
 individually prepared or corrected EDID data set in the /lib/firmware
 directory from where it is loaded via the firmware interface. The code
 (see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for
-commonly used screen resolutions (1024x768, 1280x1024, 1600x1200,
+commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200,
 1680x1050, 1920x1080) as binary blobs, but the kernel source tree does
 not contain code to create these data. In order to elucidate the origin
 of the built-in binary EDID blobs and to facilitate the creation of
diff --git a/Documentation/EDID/edid.S b/Documentation/EDID/edid.S
index ea97ae2..7ac0327 100644
--- a/Documentation/EDID/edid.S
+++ b/Documentation/EDID/edid.S
@@ -33,6 +33,17 @@ 
 #define XY_RATIO_5_4	0b10
 #define XY_RATIO_16_9	0b11
 
+/* Provide defaults for the timing bits */
+#ifndef ESTABLISHED_TIMING1_BITS
+#define ESTABLISHED_TIMING1_BITS 0x00
+#endif
+#ifndef ESTABLISHED_TIMING2_BITS
+#define ESTABLISHED_TIMING2_BITS 0x00
+#endif
+#ifndef ESTABLISHED_TIMING3_BITS
+#define ESTABLISHED_TIMING3_BITS 0x00
+#endif
+
 #define mfgname2id(v1,v2,v3) \
 	((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f))
 #define swap16(v1) ((v1>>8)+((v1&0xff)<<8))
@@ -139,7 +150,7 @@  white_x_y_msb:	.byte	0x50,0x54
    Bit 2	640x480 @ 75 Hz
    Bit 1	800x600 @ 56 Hz
    Bit 0	800x600 @ 60 Hz */
-estbl_timing1:	.byte	0x00
+estbl_timing1:	.byte	ESTABLISHED_TIMING1_BITS
 
 /* Bit 7	800x600 @ 72 Hz
    Bit 6	800x600 @ 75 Hz
@@ -149,11 +160,11 @@  estbl_timing1:	.byte	0x00
    Bit 2	1024x768 @ 72 Hz
    Bit 1	1024x768 @ 75 Hz
    Bit 0	1280x1024 @ 75 Hz */
-estbl_timing2:	.byte	ESTABLISHED_TIMINGS_BITS
+estbl_timing2:	.byte	ESTABLISHED_TIMING2_BITS
 
 /* Bit 7	1152x870 @ 75 Hz (Apple Macintosh II)
    Bits 6-0 	Other manufacturer-specific display mod */
-estbl_timing3:	.byte	0x00
+estbl_timing3:	.byte	ESTABLISHED_TIMING3_BITS
 
 /* Standard timing */
 /* X resolution, less 31, divided by 8 (256-2288 pixels) */
diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c
index 1b4c7a5..6e09f61 100644
--- a/drivers/gpu/drm/drm_edid_load.c
+++ b/drivers/gpu/drm/drm_edid_load.c
@@ -31,8 +31,9 @@  module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644);
 MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob "
 	"from built-in data or /lib/firmware instead. ");
 
-#define GENERIC_EDIDS 5
+#define GENERIC_EDIDS 6
 static const char *generic_edid_name[GENERIC_EDIDS] = {
+	"edid/800x600.bin",
 	"edid/1024x768.bin",
 	"edid/1280x1024.bin",
 	"edid/1600x1200.bin",
@@ -44,6 +45,24 @@  static const u8 generic_edid[GENERIC_EDIDS][128] = {
 	{
 	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
 	0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x05, 0x16, 0x01, 0x03, 0x6d, 0x1b, 0x14, 0x78,
+	0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25,
+	0x20, 0x50, 0x54, 0x01, 0x00, 0x00, 0x45, 0x40,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0xa0, 0x0f,
+	0x20, 0x00, 0x31, 0x58, 0x1c, 0x20, 0x28, 0x80,
+	0x14, 0x00, 0x15, 0xd0, 0x10, 0x00, 0x00, 0x1e,
+	0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e,
+	0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20,
+	0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b,
+	0x3d, 0x24, 0x26, 0x05, 0x00, 0x0a, 0x20, 0x20,
+	0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc,
+	0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x53,
+	0x56, 0x47, 0x41, 0x0a, 0x20, 0x20, 0x00, 0xc2,
+	},
+	{
+	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
+	0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x05, 0x16, 0x01, 0x03, 0x6d, 0x23, 0x1a, 0x78,
 	0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25,
 	0x20, 0x50, 0x54, 0x00, 0x08, 0x00, 0x61, 0x40,