| Message ID | 1412603324-18789-3-git-send-email-boris.brezillon@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, 06 Oct 2014, Boris Brezillon wrote: > The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5 > family or sama5d3 family) exposes 2 subdevices: > - a display controller (controlled by a DRM driver) > - a PWM chip > > This patch adds documentation for atmel-hlcdc DT bindings. > > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> > Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> > Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> > --- > .../devicetree/bindings/mfd/atmel-hlcdc.txt | 51 ++++++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt Applied for v3.19. > diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt > new file mode 100644 > index 0000000..f64de95a > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt > @@ -0,0 +1,51 @@ > +Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver > + > +Required properties: > + - compatible: value should be one of the following: > + "atmel,sama5d3-hlcdc" > + - reg: base address and size of the HLCDC device registers. > + - clock-names: the name of the 3 clocks requested by the HLCDC device. > + Should contain "periph_clk", "sys_clk" and "slow_clk". > + - clocks: should contain the 3 clocks requested by the HLCDC device. > + - interrupts: should contain the description of the HLCDC interrupt line > + > +The HLCDC IP exposes two subdevices: > + - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt > + - a Display Controller: see ../drm/atmel-hlcdc-dc.txt > + > +Example: > + > + hlcdc: hlcdc@f0030000 { > + compatible = "atmel,sama5d3-hlcdc"; > + reg = <0xf0030000 0x2000>; > + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; > + clock-names = "periph_clk","sys_clk", "slow_clk"; > + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; > + status = "disabled"; > + > + hlcdc-display-controller { > + compatible = "atmel,hlcdc-display-controller"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + hlcdc_panel_output: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&panel_input>; > + }; > + }; > + }; > + > + hlcdc_pwm: hlcdc-pwm { > + compatible = "atmel,hlcdc-pwm"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lcd_pwm>; > + #pwm-cells = <3>; > + }; > + };
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt new file mode 100644 index 0000000..f64de95a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt @@ -0,0 +1,51 @@ +Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver + +Required properties: + - compatible: value should be one of the following: + "atmel,sama5d3-hlcdc" + - reg: base address and size of the HLCDC device registers. + - clock-names: the name of the 3 clocks requested by the HLCDC device. + Should contain "periph_clk", "sys_clk" and "slow_clk". + - clocks: should contain the 3 clocks requested by the HLCDC device. + - interrupts: should contain the description of the HLCDC interrupt line + +The HLCDC IP exposes two subdevices: + - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt + - a Display Controller: see ../drm/atmel-hlcdc-dc.txt + +Example: + + hlcdc: hlcdc@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + };