@@ -2550,6 +2550,27 @@ int drm_mode_set_config_internal(struct drm_mode_set *set)
EXPORT_SYMBOL(drm_mode_set_config_internal);
/**
+ * drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode
+ * @mode: mode to query
+ * @hdisplay: hdisplay value to fill in
+ * @vdisplay: vdisplay value to fill in
+ *
+ * The vdisplay value will be doubled if the specified mode is a stereo mode of
+ * the appropriate layout.
+ */
+void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
+ int *hdisplay, int *vdisplay)
+{
+ struct drm_display_mode adjusted;
+
+ drm_mode_copy(&adjusted, mode);
+ drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY);
+ *hdisplay = adjusted.crtc_hdisplay;
+ *vdisplay = adjusted.crtc_vdisplay;
+}
+EXPORT_SYMBOL(drm_crtc_get_hv_timing);
+
+/**
* drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
* CRTC viewport
* @crtc: CRTC that framebuffer will be displayed on
@@ -2566,16 +2587,7 @@ int drm_crtc_check_viewport(const struct drm_crtc *crtc,
{
int hdisplay, vdisplay;
- hdisplay = mode->hdisplay;
- vdisplay = mode->vdisplay;
-
- if (drm_mode_is_stereo(mode)) {
- struct drm_display_mode adjusted = *mode;
-
- drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE);
- hdisplay = adjusted.crtc_hdisplay;
- vdisplay = adjusted.crtc_vdisplay;
- }
+ drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
if (crtc->invert_dimensions)
swap(hdisplay, vdisplay);
@@ -739,6 +739,8 @@ EXPORT_SYMBOL(drm_mode_vrefresh);
* - The CRTC_STEREO_DOUBLE flag can be used to compute the timings for
* buffers containing two eyes (only adjust the timings when needed, eg. for
* "frame packing" or "side by side full").
+ * - The CRTC_NO_DBLSCAN and CRTC_NO_VSCAN flags request that adjustment *not*
+ * be performed for doublescan and vscan > 1 modes respectively.
*/
void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags)
{
@@ -765,18 +767,22 @@ void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags)
}
}
- if (p->flags & DRM_MODE_FLAG_DBLSCAN) {
- p->crtc_vdisplay *= 2;
- p->crtc_vsync_start *= 2;
- p->crtc_vsync_end *= 2;
- p->crtc_vtotal *= 2;
+ if (!(adjust_flags & CRTC_NO_DBLSCAN)) {
+ if (p->flags & DRM_MODE_FLAG_DBLSCAN) {
+ p->crtc_vdisplay *= 2;
+ p->crtc_vsync_start *= 2;
+ p->crtc_vsync_end *= 2;
+ p->crtc_vtotal *= 2;
+ }
}
- if (p->vscan > 1) {
- p->crtc_vdisplay *= p->vscan;
- p->crtc_vsync_start *= p->vscan;
- p->crtc_vsync_end *= p->vscan;
- p->crtc_vtotal *= p->vscan;
+ if (!(adjust_flags & CRTC_NO_VSCAN)) {
+ if (p->vscan > 1) {
+ p->crtc_vdisplay *= p->vscan;
+ p->crtc_vsync_start *= p->vscan;
+ p->crtc_vsync_end *= p->vscan;
+ p->crtc_vtotal *= p->vscan;
+ }
}
if (adjust_flags & CRTC_STEREO_DOUBLE) {
@@ -10275,9 +10275,9 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
* computation to clearly distinguish it from the adjusted mode, which
* can be changed by the connectors in the below retry loop.
*/
- drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE);
- pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay;
- pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay;
+ drm_crtc_get_hv_timing(&pipe_config->requested_mode,
+ &pipe_config->pipe_src_w,
+ &pipe_config->pipe_src_h);
encoder_retry:
/* Ensure the port clock defaults are reset when retrying. */
@@ -1161,6 +1161,8 @@ extern int drm_plane_init(struct drm_device *dev,
extern void drm_plane_cleanup(struct drm_plane *plane);
extern unsigned int drm_plane_index(struct drm_plane *plane);
extern void drm_plane_force_disable(struct drm_plane *plane);
+extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
+ int *hdisplay, int *vdisplay);
extern int drm_crtc_check_viewport(const struct drm_crtc *crtc,
int x, int y,
const struct drm_display_mode *mode,
@@ -90,6 +90,9 @@ enum drm_mode_status {
#define CRTC_INTERLACE_HALVE_V (1 << 0) /* halve V values for interlacing */
#define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */
+#define CRTC_NO_DBLSCAN (1 << 2) /* don't adjust doublescan */
+#define CRTC_NO_VSCAN (1 << 3) /* don't adjust doublescan */
+#define CRTC_STEREO_DOUBLE_ONLY (CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)
#define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF