@@ -69,6 +69,7 @@ STMicroelectronics stih4xx platforms
- clock-names: names of the clocks listed in clocks property in the same
order.
- hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not.
+ - ddc: phandle of an I2C controller used for DDC EDID probing
sti-hda:
Required properties:
@@ -480,17 +480,15 @@ static const struct drm_bridge_funcs sti_hdmi_bridge_funcs = {
static int sti_hdmi_connector_get_modes(struct drm_connector *connector)
{
- struct i2c_adapter *i2c_adap;
+ struct sti_hdmi_connector *hdmi_connector
+ = to_sti_hdmi_connector(connector);
+ struct sti_hdmi *hdmi = hdmi_connector->hdmi;
struct edid *edid;
int count;
DRM_DEBUG_DRIVER("\n");
- i2c_adap = i2c_get_adapter(1);
- if (!i2c_adap)
- goto fail;
-
- edid = drm_get_edid(connector, i2c_adap);
+ edid = drm_get_edid(connector, hdmi->ddc_adapt);
if (!edid)
goto fail;
@@ -603,29 +601,38 @@ static int sti_hdmi_bind(struct device *dev, struct device *master, void *data)
struct sti_hdmi_connector *connector;
struct drm_connector *drm_connector;
struct drm_bridge *bridge;
- struct i2c_adapter *i2c_adap;
+ struct device_node *ddc;
int err;
- i2c_adap = i2c_get_adapter(1);
- if (!i2c_adap)
- return -EPROBE_DEFER;
+ ddc = of_parse_phandle(dev->of_node, "ddc", 0);
+ if (ddc) {
+ hdmi->ddc_adapt = of_find_i2c_adapter_by_node(ddc);
+ if (!hdmi->ddc_adapt) {
+ err = -EPROBE_DEFER;
+ of_node_put(ddc);
+ return err;
+ }
+
+ of_node_put(ddc);
+ }
/* Set the drm device handle */
hdmi->drm_dev = drm_dev;
encoder = sti_hdmi_find_encoder(drm_dev);
if (!encoder)
- return -ENOMEM;
+ goto err_adapt;
connector = devm_kzalloc(dev, sizeof(*connector), GFP_KERNEL);
if (!connector)
- return -ENOMEM;
+ goto err_adapt;
+
connector->hdmi = hdmi;
bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL);
if (!bridge)
- return -ENOMEM;
+ goto err_adapt;
bridge->driver_private = hdmi;
drm_bridge_init(drm_dev, bridge, &sti_hdmi_bridge_funcs);
@@ -662,6 +669,8 @@ err_sysfs:
err_connector:
drm_bridge_cleanup(bridge);
drm_connector_cleanup(drm_connector);
+err_adapt:
+ put_device(&hdmi->ddc_adapt->dev);
return -EINVAL;
}
@@ -788,6 +797,11 @@ static int sti_hdmi_probe(struct platform_device *pdev)
static int sti_hdmi_remove(struct platform_device *pdev)
{
+ struct sti_hdmi *hdmi = dev_get_drvdata(&pdev->dev);
+
+ if (hdmi->ddc_adapt)
+ put_device(&hdmi->ddc_adapt->dev);
+
component_del(&pdev->dev, &sti_hdmi_ops);
return 0;
}
@@ -62,6 +62,7 @@ struct sti_hdmi {
wait_queue_head_t wait_event;
bool event_received;
struct reset_control *reset;
+ struct i2c_adapter *ddc_adapt;
};
u32 hdmi_read(struct sti_hdmi *hdmi, int offset);
Depending of the board configuration i2c for ddc could change, this patch allow to use a phandle to specify which i2c controller to use. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> --- .../devicetree/bindings/gpu/st,stih4xx.txt | 1 + drivers/gpu/drm/sti/sti_hdmi.c | 40 +++++++++++++++------- drivers/gpu/drm/sti/sti_hdmi.h | 1 + 3 files changed, 29 insertions(+), 13 deletions(-)