| Message ID | 1420279798-961-1-git-send-email-tiwai@suse.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, Jan 3, 2015 at 5:09 AM, Takashi Iwai <tiwai@suse.de> wrote: > A BUG_ON() call in dce3_2_afmt_write_sad_regs() is triggered when a > HDMI monitor without audio is plugged: I have a slightly different fix already queued up: http://lists.freedesktop.org/archives/dri-devel/2014-December/073672.html Alex > > kernel BUG at ../drivers/gpu/drm/radeon/dce3_1_afmt.c:110! > invalid opcode: 0000 [#1] PREEMPT SMP > CPU: 2 PID: 967 Comm: Xorg Tainted: PO 3.16.7-7-desktop #1 > Hardware name: System manufacturer System Product Name/M4A77T, BIOS 2401 05/18/2011 > task: ffff8800cea86350 ti: ffff8800c1880000 task.ti: ffff8800c1880000 > RIP: 0010:[<ffffffffa0126c50>] dce3_1_hdmi_setmode+0x570/0x5a0 [radeon] > Call Trace: > [<ffffffffa00a6936>] drm_crtc_helper_set_mode+0x346/0x520 [drm_kms_helper] > [<ffffffffa00a7678>] drm_crtc_helper_set_config+0x8a8/0xad0 [drm_kms_helper] > [<ffffffffa00ede3f>] radeon_crtc_set_config+0x3f/0x110 [radeon] > [<ffffffffa001edc1>] drm_mode_set_config_internal+0x61/0xe0 [drm] > [<ffffffffa00a9a6b>] restore_fbdev_mode+0xab/0xd0 [drm_kms_helper] > [<ffffffffa00a9aae>] drm_fb_helper_restore_fbdev_mode_unlocked+0x1e/0x30 [drm_kms_helper] > [<ffffffffa00ab642>] drm_fb_helper_set_par+0x22/0x60 [drm_kms_helper] > [<ffffffffa00ab5cb>] drm_fb_helper_hotplug_event+0x8b/0xe0 [drm_kms_helper] > [<ffffffffa00ab65a>] drm_fb_helper_set_par+0x3a/0x60 [drm_kms_helper] > [<ffffffff813818ce>] fb_set_var+0x15e/0x3b0 > [<ffffffff81378d0b>] fbcon_blank+0x1cb/0x2b0 > [<ffffffff813f2a31>] do_unblank_screen+0xa1/0x1b0 > [<ffffffff813e8fd3>] complete_change_console+0x53/0xe0 > [<ffffffff813e9fa9>] vt_ioctl+0xf49/0x10d0 > [<ffffffff813ddfdc>] tty_ioctl+0x26c/0xb70 > [<ffffffff811cad17>] do_vfs_ioctl+0x2e7/0x4c0 > [<ffffffff811caf71>] SyS_ioctl+0x81/0xa0 > [<ffffffff81622a2d>] system_call_fastpath+0x1a/0x1f > [<00007f2fae8c6397>] 0x7f2fae8c6396 > > Actually the BUG_ON() check is wrong, since sads may be NULL when > sad_count is zero. This patch removes the BUG_ON() and adds the > proper NULL initialization of sads. > > Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=911356 > Cc: <stable@vger.kernel.org> > Signed-off-by: Takashi Iwai <tiwai@suse.de> > --- > drivers/gpu/drm/radeon/dce3_1_afmt.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/radeon/dce3_1_afmt.c b/drivers/gpu/drm/radeon/dce3_1_afmt.c > index 2fe8cfc966d9..7ca23f45829e 100644 > --- a/drivers/gpu/drm/radeon/dce3_1_afmt.c > +++ b/drivers/gpu/drm/radeon/dce3_1_afmt.c > @@ -72,7 +72,7 @@ static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder) > struct radeon_device *rdev = encoder->dev->dev_private; > struct drm_connector *connector; > struct radeon_connector *radeon_connector = NULL; > - struct cea_sad *sads; > + struct cea_sad *sads = NULL; > int i, sad_count; > > static const u16 eld_reg_to_type[][2] = { > @@ -107,7 +107,6 @@ static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder) > DRM_ERROR("Couldn't read SADs: %d\n", sad_count); > return; > } > - BUG_ON(!sads); > > for (i = 0; i < ARRAY_SIZE(eld_reg_to_type); i++) { > u32 value = 0; > -- > 2.2.0 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/dri-devel
At Mon, 5 Jan 2015 12:07:52 -0500, Alex Deucher wrote: > > On Sat, Jan 3, 2015 at 5:09 AM, Takashi Iwai <tiwai@suse.de> wrote: > > A BUG_ON() call in dce3_2_afmt_write_sad_regs() is triggered when a > > HDMI monitor without audio is plugged: > > I have a slightly different fix already queued up: > http://lists.freedesktop.org/archives/dri-devel/2014-December/073672.html Oh, that's identical with my v1 patch :) But, with that fix, an error message will be shown at each time you plug such a monitor, right? This doesn't look right, so I revised the patch. Also, can we skip the register write completely? I thought of a case like we replug a monitor from the one with audio to another without audio... thanks, Takashi > > Alex > > > > > kernel BUG at ../drivers/gpu/drm/radeon/dce3_1_afmt.c:110! > > invalid opcode: 0000 [#1] PREEMPT SMP > > CPU: 2 PID: 967 Comm: Xorg Tainted: PO 3.16.7-7-desktop #1 > > Hardware name: System manufacturer System Product Name/M4A77T, BIOS 2401 05/18/2011 > > task: ffff8800cea86350 ti: ffff8800c1880000 task.ti: ffff8800c1880000 > > RIP: 0010:[<ffffffffa0126c50>] dce3_1_hdmi_setmode+0x570/0x5a0 [radeon] > > Call Trace: > > [<ffffffffa00a6936>] drm_crtc_helper_set_mode+0x346/0x520 [drm_kms_helper] > > [<ffffffffa00a7678>] drm_crtc_helper_set_config+0x8a8/0xad0 [drm_kms_helper] > > [<ffffffffa00ede3f>] radeon_crtc_set_config+0x3f/0x110 [radeon] > > [<ffffffffa001edc1>] drm_mode_set_config_internal+0x61/0xe0 [drm] > > [<ffffffffa00a9a6b>] restore_fbdev_mode+0xab/0xd0 [drm_kms_helper] > > [<ffffffffa00a9aae>] drm_fb_helper_restore_fbdev_mode_unlocked+0x1e/0x30 [drm_kms_helper] > > [<ffffffffa00ab642>] drm_fb_helper_set_par+0x22/0x60 [drm_kms_helper] > > [<ffffffffa00ab5cb>] drm_fb_helper_hotplug_event+0x8b/0xe0 [drm_kms_helper] > > [<ffffffffa00ab65a>] drm_fb_helper_set_par+0x3a/0x60 [drm_kms_helper] > > [<ffffffff813818ce>] fb_set_var+0x15e/0x3b0 > > [<ffffffff81378d0b>] fbcon_blank+0x1cb/0x2b0 > > [<ffffffff813f2a31>] do_unblank_screen+0xa1/0x1b0 > > [<ffffffff813e8fd3>] complete_change_console+0x53/0xe0 > > [<ffffffff813e9fa9>] vt_ioctl+0xf49/0x10d0 > > [<ffffffff813ddfdc>] tty_ioctl+0x26c/0xb70 > > [<ffffffff811cad17>] do_vfs_ioctl+0x2e7/0x4c0 > > [<ffffffff811caf71>] SyS_ioctl+0x81/0xa0 > > [<ffffffff81622a2d>] system_call_fastpath+0x1a/0x1f > > [<00007f2fae8c6397>] 0x7f2fae8c6396 > > > > Actually the BUG_ON() check is wrong, since sads may be NULL when > > sad_count is zero. This patch removes the BUG_ON() and adds the > > proper NULL initialization of sads. > > > > Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=911356 > > Cc: <stable@vger.kernel.org> > > Signed-off-by: Takashi Iwai <tiwai@suse.de> > > --- > > drivers/gpu/drm/radeon/dce3_1_afmt.c | 3 +-- > > 1 file changed, 1 insertion(+), 2 deletions(-) > > > > diff --git a/drivers/gpu/drm/radeon/dce3_1_afmt.c b/drivers/gpu/drm/radeon/dce3_1_afmt.c > > index 2fe8cfc966d9..7ca23f45829e 100644 > > --- a/drivers/gpu/drm/radeon/dce3_1_afmt.c > > +++ b/drivers/gpu/drm/radeon/dce3_1_afmt.c > > @@ -72,7 +72,7 @@ static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder) > > struct radeon_device *rdev = encoder->dev->dev_private; > > struct drm_connector *connector; > > struct radeon_connector *radeon_connector = NULL; > > - struct cea_sad *sads; > > + struct cea_sad *sads = NULL; > > int i, sad_count; > > > > static const u16 eld_reg_to_type[][2] = { > > @@ -107,7 +107,6 @@ static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder) > > DRM_ERROR("Couldn't read SADs: %d\n", sad_count); > > return; > > } > > - BUG_ON(!sads); > > > > for (i = 0; i < ARRAY_SIZE(eld_reg_to_type); i++) { > > u32 value = 0; > > -- > > 2.2.0 > > > > _______________________________________________ > > dri-devel mailing list > > dri-devel@lists.freedesktop.org > > http://lists.freedesktop.org/mailman/listinfo/dri-devel >
On Mon, Jan 5, 2015 at 12:23 PM, Takashi Iwai <tiwai@suse.de> wrote: > At Mon, 5 Jan 2015 12:07:52 -0500, > Alex Deucher wrote: >> >> On Sat, Jan 3, 2015 at 5:09 AM, Takashi Iwai <tiwai@suse.de> wrote: >> > A BUG_ON() call in dce3_2_afmt_write_sad_regs() is triggered when a >> > HDMI monitor without audio is plugged: >> >> I have a slightly different fix already queued up: >> http://lists.freedesktop.org/archives/dri-devel/2014-December/073672.html > > Oh, that's identical with my v1 patch :) But, with that fix, an error > message will be shown at each time you plug such a monitor, right? > This doesn't look right, so I revised the patch. Yes, but if the monitor claims to support audio, it should supply SADs. If it doesn't, the driver has no way of knowing what type of audio the monitor supports. I'm fine with removing the error message or making it debug only however. > > Also, can we skip the register write completely? I thought of a case > like we replug a monitor from the one with audio to another without > audio... Changing the monitor will generally trigger a full probe and modeset again anyway. The register writes are just there to pass the audio information supported by the monitor along to the audio driver. Alex > > > thanks, > > Takashi > >> >> Alex >> >> > >> > kernel BUG at ../drivers/gpu/drm/radeon/dce3_1_afmt.c:110! >> > invalid opcode: 0000 [#1] PREEMPT SMP >> > CPU: 2 PID: 967 Comm: Xorg Tainted: PO 3.16.7-7-desktop #1 >> > Hardware name: System manufacturer System Product Name/M4A77T, BIOS 2401 05/18/2011 >> > task: ffff8800cea86350 ti: ffff8800c1880000 task.ti: ffff8800c1880000 >> > RIP: 0010:[<ffffffffa0126c50>] dce3_1_hdmi_setmode+0x570/0x5a0 [radeon] >> > Call Trace: >> > [<ffffffffa00a6936>] drm_crtc_helper_set_mode+0x346/0x520 [drm_kms_helper] >> > [<ffffffffa00a7678>] drm_crtc_helper_set_config+0x8a8/0xad0 [drm_kms_helper] >> > [<ffffffffa00ede3f>] radeon_crtc_set_config+0x3f/0x110 [radeon] >> > [<ffffffffa001edc1>] drm_mode_set_config_internal+0x61/0xe0 [drm] >> > [<ffffffffa00a9a6b>] restore_fbdev_mode+0xab/0xd0 [drm_kms_helper] >> > [<ffffffffa00a9aae>] drm_fb_helper_restore_fbdev_mode_unlocked+0x1e/0x30 [drm_kms_helper] >> > [<ffffffffa00ab642>] drm_fb_helper_set_par+0x22/0x60 [drm_kms_helper] >> > [<ffffffffa00ab5cb>] drm_fb_helper_hotplug_event+0x8b/0xe0 [drm_kms_helper] >> > [<ffffffffa00ab65a>] drm_fb_helper_set_par+0x3a/0x60 [drm_kms_helper] >> > [<ffffffff813818ce>] fb_set_var+0x15e/0x3b0 >> > [<ffffffff81378d0b>] fbcon_blank+0x1cb/0x2b0 >> > [<ffffffff813f2a31>] do_unblank_screen+0xa1/0x1b0 >> > [<ffffffff813e8fd3>] complete_change_console+0x53/0xe0 >> > [<ffffffff813e9fa9>] vt_ioctl+0xf49/0x10d0 >> > [<ffffffff813ddfdc>] tty_ioctl+0x26c/0xb70 >> > [<ffffffff811cad17>] do_vfs_ioctl+0x2e7/0x4c0 >> > [<ffffffff811caf71>] SyS_ioctl+0x81/0xa0 >> > [<ffffffff81622a2d>] system_call_fastpath+0x1a/0x1f >> > [<00007f2fae8c6397>] 0x7f2fae8c6396 >> > >> > Actually the BUG_ON() check is wrong, since sads may be NULL when >> > sad_count is zero. This patch removes the BUG_ON() and adds the >> > proper NULL initialization of sads. >> > >> > Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=911356 >> > Cc: <stable@vger.kernel.org> >> > Signed-off-by: Takashi Iwai <tiwai@suse.de> >> > --- >> > drivers/gpu/drm/radeon/dce3_1_afmt.c | 3 +-- >> > 1 file changed, 1 insertion(+), 2 deletions(-) >> > >> > diff --git a/drivers/gpu/drm/radeon/dce3_1_afmt.c b/drivers/gpu/drm/radeon/dce3_1_afmt.c >> > index 2fe8cfc966d9..7ca23f45829e 100644 >> > --- a/drivers/gpu/drm/radeon/dce3_1_afmt.c >> > +++ b/drivers/gpu/drm/radeon/dce3_1_afmt.c >> > @@ -72,7 +72,7 @@ static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder) >> > struct radeon_device *rdev = encoder->dev->dev_private; >> > struct drm_connector *connector; >> > struct radeon_connector *radeon_connector = NULL; >> > - struct cea_sad *sads; >> > + struct cea_sad *sads = NULL; >> > int i, sad_count; >> > >> > static const u16 eld_reg_to_type[][2] = { >> > @@ -107,7 +107,6 @@ static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder) >> > DRM_ERROR("Couldn't read SADs: %d\n", sad_count); >> > return; >> > } >> > - BUG_ON(!sads); >> > >> > for (i = 0; i < ARRAY_SIZE(eld_reg_to_type); i++) { >> > u32 value = 0; >> > -- >> > 2.2.0 >> > >> > _______________________________________________ >> > dri-devel mailing list >> > dri-devel@lists.freedesktop.org >> > http://lists.freedesktop.org/mailman/listinfo/dri-devel >>
At Mon, 5 Jan 2015 12:48:05 -0500, Alex Deucher wrote: > > On Mon, Jan 5, 2015 at 12:23 PM, Takashi Iwai <tiwai@suse.de> wrote: > > At Mon, 5 Jan 2015 12:07:52 -0500, > > Alex Deucher wrote: > >> > >> On Sat, Jan 3, 2015 at 5:09 AM, Takashi Iwai <tiwai@suse.de> wrote: > >> > A BUG_ON() call in dce3_2_afmt_write_sad_regs() is triggered when a > >> > HDMI monitor without audio is plugged: > >> > >> I have a slightly different fix already queued up: > >> http://lists.freedesktop.org/archives/dri-devel/2014-December/073672.html > > > > Oh, that's identical with my v1 patch :) But, with that fix, an error > > message will be shown at each time you plug such a monitor, right? > > This doesn't look right, so I revised the patch. > > Yes, but if the monitor claims to support audio, it should supply > SADs. If it doesn't, the driver has no way of knowing what type of > audio the monitor supports. IMO, we may assume that the monitor has no audio at all if sad_count = 0. Or are there any monitors that do support audio even without SAD...? > I'm fine with removing the error message > or making it debug only however. If sad_count = 0 is an invalid state that shouldn't happen, then printing an error is correct behavior. So, the question comes to the point whether sad_count = 0 is a sane value or not. > > Also, can we skip the register write completely? I thought of a case > > like we replug a monitor from the one with audio to another without > > audio... > > Changing the monitor will generally trigger a full probe and modeset > again anyway. The register writes are just there to pass the audio > information supported by the monitor along to the audio driver. OK, thanks for clarification. In anyway, I still think we should kill BUG_ON() there. But this can be a separate patch, of course. Takashi > > Alex > > > > > > > thanks, > > > > Takashi > > > >> > >> Alex > >> > >> > > >> > kernel BUG at ../drivers/gpu/drm/radeon/dce3_1_afmt.c:110! > >> > invalid opcode: 0000 [#1] PREEMPT SMP > >> > CPU: 2 PID: 967 Comm: Xorg Tainted: PO 3.16.7-7-desktop #1 > >> > Hardware name: System manufacturer System Product Name/M4A77T, BIOS 2401 05/18/2011 > >> > task: ffff8800cea86350 ti: ffff8800c1880000 task.ti: ffff8800c1880000 > >> > RIP: 0010:[<ffffffffa0126c50>] dce3_1_hdmi_setmode+0x570/0x5a0 [radeon] > >> > Call Trace: > >> > [<ffffffffa00a6936>] drm_crtc_helper_set_mode+0x346/0x520 [drm_kms_helper] > >> > [<ffffffffa00a7678>] drm_crtc_helper_set_config+0x8a8/0xad0 [drm_kms_helper] > >> > [<ffffffffa00ede3f>] radeon_crtc_set_config+0x3f/0x110 [radeon] > >> > [<ffffffffa001edc1>] drm_mode_set_config_internal+0x61/0xe0 [drm] > >> > [<ffffffffa00a9a6b>] restore_fbdev_mode+0xab/0xd0 [drm_kms_helper] > >> > [<ffffffffa00a9aae>] drm_fb_helper_restore_fbdev_mode_unlocked+0x1e/0x30 [drm_kms_helper] > >> > [<ffffffffa00ab642>] drm_fb_helper_set_par+0x22/0x60 [drm_kms_helper] > >> > [<ffffffffa00ab5cb>] drm_fb_helper_hotplug_event+0x8b/0xe0 [drm_kms_helper] > >> > [<ffffffffa00ab65a>] drm_fb_helper_set_par+0x3a/0x60 [drm_kms_helper] > >> > [<ffffffff813818ce>] fb_set_var+0x15e/0x3b0 > >> > [<ffffffff81378d0b>] fbcon_blank+0x1cb/0x2b0 > >> > [<ffffffff813f2a31>] do_unblank_screen+0xa1/0x1b0 > >> > [<ffffffff813e8fd3>] complete_change_console+0x53/0xe0 > >> > [<ffffffff813e9fa9>] vt_ioctl+0xf49/0x10d0 > >> > [<ffffffff813ddfdc>] tty_ioctl+0x26c/0xb70 > >> > [<ffffffff811cad17>] do_vfs_ioctl+0x2e7/0x4c0 > >> > [<ffffffff811caf71>] SyS_ioctl+0x81/0xa0 > >> > [<ffffffff81622a2d>] system_call_fastpath+0x1a/0x1f > >> > [<00007f2fae8c6397>] 0x7f2fae8c6396 > >> > > >> > Actually the BUG_ON() check is wrong, since sads may be NULL when > >> > sad_count is zero. This patch removes the BUG_ON() and adds the > >> > proper NULL initialization of sads. > >> > > >> > Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=911356 > >> > Cc: <stable@vger.kernel.org> > >> > Signed-off-by: Takashi Iwai <tiwai@suse.de> > >> > --- > >> > drivers/gpu/drm/radeon/dce3_1_afmt.c | 3 +-- > >> > 1 file changed, 1 insertion(+), 2 deletions(-) > >> > > >> > diff --git a/drivers/gpu/drm/radeon/dce3_1_afmt.c b/drivers/gpu/drm/radeon/dce3_1_afmt.c > >> > index 2fe8cfc966d9..7ca23f45829e 100644 > >> > --- a/drivers/gpu/drm/radeon/dce3_1_afmt.c > >> > +++ b/drivers/gpu/drm/radeon/dce3_1_afmt.c > >> > @@ -72,7 +72,7 @@ static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder) > >> > struct radeon_device *rdev = encoder->dev->dev_private; > >> > struct drm_connector *connector; > >> > struct radeon_connector *radeon_connector = NULL; > >> > - struct cea_sad *sads; > >> > + struct cea_sad *sads = NULL; > >> > int i, sad_count; > >> > > >> > static const u16 eld_reg_to_type[][2] = { > >> > @@ -107,7 +107,6 @@ static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder) > >> > DRM_ERROR("Couldn't read SADs: %d\n", sad_count); > >> > return; > >> > } > >> > - BUG_ON(!sads); > >> > > >> > for (i = 0; i < ARRAY_SIZE(eld_reg_to_type); i++) { > >> > u32 value = 0; > >> > -- > >> > 2.2.0 > >> > > >> > _______________________________________________ > >> > dri-devel mailing list > >> > dri-devel@lists.freedesktop.org > >> > http://lists.freedesktop.org/mailman/listinfo/dri-devel > >> >
On Mon, Jan 5, 2015 at 1:16 PM, Takashi Iwai <tiwai@suse.de> wrote: > At Mon, 5 Jan 2015 12:48:05 -0500, > Alex Deucher wrote: >> >> On Mon, Jan 5, 2015 at 12:23 PM, Takashi Iwai <tiwai@suse.de> wrote: >> > At Mon, 5 Jan 2015 12:07:52 -0500, >> > Alex Deucher wrote: >> >> >> >> On Sat, Jan 3, 2015 at 5:09 AM, Takashi Iwai <tiwai@suse.de> wrote: >> >> > A BUG_ON() call in dce3_2_afmt_write_sad_regs() is triggered when a >> >> > HDMI monitor without audio is plugged: >> >> >> >> I have a slightly different fix already queued up: >> >> http://lists.freedesktop.org/archives/dri-devel/2014-December/073672.html >> > >> > Oh, that's identical with my v1 patch :) But, with that fix, an error >> > message will be shown at each time you plug such a monitor, right? >> > This doesn't look right, so I revised the patch. >> >> Yes, but if the monitor claims to support audio, it should supply >> SADs. If it doesn't, the driver has no way of knowing what type of >> audio the monitor supports. > > IMO, we may assume that the monitor has no audio at all if sad_count = > 0. Or are there any monitors that do support audio even without > SAD...? I don't remember off hand. We'd need to check the CEA edid extension spec. The radeon hdmi code should be restructured a bit to enable hdmi features in a more fine grained way. If the monitor supports hdmi, we try and enable audio in addition to the other hdmi packets. We should be using drm_detect_monitor_audio() to decide whether to enable audio features. We have some patches internally which cleans a lot of this up that should be available soon. > >> I'm fine with removing the error message >> or making it debug only however. > > If sad_count = 0 is an invalid state that shouldn't happen, then > printing an error is correct behavior. So, the question comes to the > point whether sad_count = 0 is a sane value or not. > >> > Also, can we skip the register write completely? I thought of a case >> > like we replug a monitor from the one with audio to another without >> > audio... >> >> Changing the monitor will generally trigger a full probe and modeset >> again anyway. The register writes are just there to pass the audio >> information supported by the monitor along to the audio driver. > > OK, thanks for clarification. > > > In anyway, I still think we should kill BUG_ON() there. But this can > be a separate patch, of course. Yeah, agreed. Alex > > > Takashi > >> >> Alex >> >> > >> > >> > thanks, >> > >> > Takashi >> > >> >> >> >> Alex >> >> >> >> > >> >> > kernel BUG at ../drivers/gpu/drm/radeon/dce3_1_afmt.c:110! >> >> > invalid opcode: 0000 [#1] PREEMPT SMP >> >> > CPU: 2 PID: 967 Comm: Xorg Tainted: PO 3.16.7-7-desktop #1 >> >> > Hardware name: System manufacturer System Product Name/M4A77T, BIOS 2401 05/18/2011 >> >> > task: ffff8800cea86350 ti: ffff8800c1880000 task.ti: ffff8800c1880000 >> >> > RIP: 0010:[<ffffffffa0126c50>] dce3_1_hdmi_setmode+0x570/0x5a0 [radeon] >> >> > Call Trace: >> >> > [<ffffffffa00a6936>] drm_crtc_helper_set_mode+0x346/0x520 [drm_kms_helper] >> >> > [<ffffffffa00a7678>] drm_crtc_helper_set_config+0x8a8/0xad0 [drm_kms_helper] >> >> > [<ffffffffa00ede3f>] radeon_crtc_set_config+0x3f/0x110 [radeon] >> >> > [<ffffffffa001edc1>] drm_mode_set_config_internal+0x61/0xe0 [drm] >> >> > [<ffffffffa00a9a6b>] restore_fbdev_mode+0xab/0xd0 [drm_kms_helper] >> >> > [<ffffffffa00a9aae>] drm_fb_helper_restore_fbdev_mode_unlocked+0x1e/0x30 [drm_kms_helper] >> >> > [<ffffffffa00ab642>] drm_fb_helper_set_par+0x22/0x60 [drm_kms_helper] >> >> > [<ffffffffa00ab5cb>] drm_fb_helper_hotplug_event+0x8b/0xe0 [drm_kms_helper] >> >> > [<ffffffffa00ab65a>] drm_fb_helper_set_par+0x3a/0x60 [drm_kms_helper] >> >> > [<ffffffff813818ce>] fb_set_var+0x15e/0x3b0 >> >> > [<ffffffff81378d0b>] fbcon_blank+0x1cb/0x2b0 >> >> > [<ffffffff813f2a31>] do_unblank_screen+0xa1/0x1b0 >> >> > [<ffffffff813e8fd3>] complete_change_console+0x53/0xe0 >> >> > [<ffffffff813e9fa9>] vt_ioctl+0xf49/0x10d0 >> >> > [<ffffffff813ddfdc>] tty_ioctl+0x26c/0xb70 >> >> > [<ffffffff811cad17>] do_vfs_ioctl+0x2e7/0x4c0 >> >> > [<ffffffff811caf71>] SyS_ioctl+0x81/0xa0 >> >> > [<ffffffff81622a2d>] system_call_fastpath+0x1a/0x1f >> >> > [<00007f2fae8c6397>] 0x7f2fae8c6396 >> >> > >> >> > Actually the BUG_ON() check is wrong, since sads may be NULL when >> >> > sad_count is zero. This patch removes the BUG_ON() and adds the >> >> > proper NULL initialization of sads. >> >> > >> >> > Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=911356 >> >> > Cc: <stable@vger.kernel.org> >> >> > Signed-off-by: Takashi Iwai <tiwai@suse.de> >> >> > --- >> >> > drivers/gpu/drm/radeon/dce3_1_afmt.c | 3 +-- >> >> > 1 file changed, 1 insertion(+), 2 deletions(-) >> >> > >> >> > diff --git a/drivers/gpu/drm/radeon/dce3_1_afmt.c b/drivers/gpu/drm/radeon/dce3_1_afmt.c >> >> > index 2fe8cfc966d9..7ca23f45829e 100644 >> >> > --- a/drivers/gpu/drm/radeon/dce3_1_afmt.c >> >> > +++ b/drivers/gpu/drm/radeon/dce3_1_afmt.c >> >> > @@ -72,7 +72,7 @@ static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder) >> >> > struct radeon_device *rdev = encoder->dev->dev_private; >> >> > struct drm_connector *connector; >> >> > struct radeon_connector *radeon_connector = NULL; >> >> > - struct cea_sad *sads; >> >> > + struct cea_sad *sads = NULL; >> >> > int i, sad_count; >> >> > >> >> > static const u16 eld_reg_to_type[][2] = { >> >> > @@ -107,7 +107,6 @@ static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder) >> >> > DRM_ERROR("Couldn't read SADs: %d\n", sad_count); >> >> > return; >> >> > } >> >> > - BUG_ON(!sads); >> >> > >> >> > for (i = 0; i < ARRAY_SIZE(eld_reg_to_type); i++) { >> >> > u32 value = 0; >> >> > -- >> >> > 2.2.0 >> >> > >> >> > _______________________________________________ >> >> > dri-devel mailing list >> >> > dri-devel@lists.freedesktop.org >> >> > http://lists.freedesktop.org/mailman/listinfo/dri-devel >> >> >>
diff --git a/drivers/gpu/drm/radeon/dce3_1_afmt.c b/drivers/gpu/drm/radeon/dce3_1_afmt.c index 2fe8cfc966d9..7ca23f45829e 100644 --- a/drivers/gpu/drm/radeon/dce3_1_afmt.c +++ b/drivers/gpu/drm/radeon/dce3_1_afmt.c @@ -72,7 +72,7 @@ static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder) struct radeon_device *rdev = encoder->dev->dev_private; struct drm_connector *connector; struct radeon_connector *radeon_connector = NULL; - struct cea_sad *sads; + struct cea_sad *sads = NULL; int i, sad_count; static const u16 eld_reg_to_type[][2] = { @@ -107,7 +107,6 @@ static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder) DRM_ERROR("Couldn't read SADs: %d\n", sad_count); return; } - BUG_ON(!sads); for (i = 0; i < ARRAY_SIZE(eld_reg_to_type); i++) { u32 value = 0;
A BUG_ON() call in dce3_2_afmt_write_sad_regs() is triggered when a HDMI monitor without audio is plugged: kernel BUG at ../drivers/gpu/drm/radeon/dce3_1_afmt.c:110! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 967 Comm: Xorg Tainted: PO 3.16.7-7-desktop #1 Hardware name: System manufacturer System Product Name/M4A77T, BIOS 2401 05/18/2011 task: ffff8800cea86350 ti: ffff8800c1880000 task.ti: ffff8800c1880000 RIP: 0010:[<ffffffffa0126c50>] dce3_1_hdmi_setmode+0x570/0x5a0 [radeon] Call Trace: [<ffffffffa00a6936>] drm_crtc_helper_set_mode+0x346/0x520 [drm_kms_helper] [<ffffffffa00a7678>] drm_crtc_helper_set_config+0x8a8/0xad0 [drm_kms_helper] [<ffffffffa00ede3f>] radeon_crtc_set_config+0x3f/0x110 [radeon] [<ffffffffa001edc1>] drm_mode_set_config_internal+0x61/0xe0 [drm] [<ffffffffa00a9a6b>] restore_fbdev_mode+0xab/0xd0 [drm_kms_helper] [<ffffffffa00a9aae>] drm_fb_helper_restore_fbdev_mode_unlocked+0x1e/0x30 [drm_kms_helper] [<ffffffffa00ab642>] drm_fb_helper_set_par+0x22/0x60 [drm_kms_helper] [<ffffffffa00ab5cb>] drm_fb_helper_hotplug_event+0x8b/0xe0 [drm_kms_helper] [<ffffffffa00ab65a>] drm_fb_helper_set_par+0x3a/0x60 [drm_kms_helper] [<ffffffff813818ce>] fb_set_var+0x15e/0x3b0 [<ffffffff81378d0b>] fbcon_blank+0x1cb/0x2b0 [<ffffffff813f2a31>] do_unblank_screen+0xa1/0x1b0 [<ffffffff813e8fd3>] complete_change_console+0x53/0xe0 [<ffffffff813e9fa9>] vt_ioctl+0xf49/0x10d0 [<ffffffff813ddfdc>] tty_ioctl+0x26c/0xb70 [<ffffffff811cad17>] do_vfs_ioctl+0x2e7/0x4c0 [<ffffffff811caf71>] SyS_ioctl+0x81/0xa0 [<ffffffff81622a2d>] system_call_fastpath+0x1a/0x1f [<00007f2fae8c6397>] 0x7f2fae8c6396 Actually the BUG_ON() check is wrong, since sads may be NULL when sad_count is zero. This patch removes the BUG_ON() and adds the proper NULL initialization of sads. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=911356 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> --- drivers/gpu/drm/radeon/dce3_1_afmt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)