@@ -62,8 +62,8 @@ struct mdp5_crtc {
/* current cursor being scanned out: */
struct drm_gem_object *scanout_bo;
- uint32_t width;
- uint32_t height;
+ uint32_t width, height;
+ uint32_t x, y;
} cursor;
};
#define to_mdp5_crtc(x) container_of(x, struct mdp5_crtc, base)
@@ -411,6 +411,32 @@ static int mdp5_crtc_set_property(struct drm_crtc *crtc,
return -EINVAL;
}
+static void get_roi(struct drm_crtc *crtc, uint32_t *roi_w, uint32_t *roi_h)
+{
+ struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
+ uint32_t xres = crtc->mode.hdisplay;
+ uint32_t yres = crtc->mode.vdisplay;
+
+ /*
+ * Cursor Region Of Interest (ROI) is a plane read from cursor
+ * buffer to render. The ROI region is determined by the visibility of
+ * the cursor point. In the default Cursor image the cursor point will
+ * be at the top left of the cursor image, unless it is specified
+ * otherwise using hotspot feature.
+ *
+ * If the cursor point reaches the right (xres - x < cursor.width) or
+ * bottom (yres - y < cursor.height) boundary of the screen, then ROI
+ * width and ROI height need to be evaluated to crop the cursor image
+ * accordingly.
+ * (xres-x) will be new cursor width when x > (xres - cursor.width)
+ * (yres-y) will be new cursor height when y > (yres - cursor.height)
+ */
+ *roi_w = min(mdp5_crtc->cursor.width, xres -
+ mdp5_crtc->cursor.x);
+ *roi_h = min(mdp5_crtc->cursor.height, yres -
+ mdp5_crtc->cursor.y);
+}
+
static int mdp5_crtc_cursor_set(struct drm_crtc *crtc,
struct drm_file *file, uint32_t handle,
uint32_t width, uint32_t height)
@@ -424,6 +450,7 @@ static int mdp5_crtc_cursor_set(struct drm_crtc *crtc,
unsigned int depth;
enum mdp5_cursor_alpha cur_alpha = CURSOR_ALPHA_PER_PIXEL;
uint32_t flush_mask = mdp_ctl_flush_mask_cursor(0);
+ uint32_t roi_w, roi_h;
unsigned long flags;
if ((width > CURSOR_WIDTH) || (height > CURSOR_HEIGHT)) {
@@ -454,6 +481,12 @@ static int mdp5_crtc_cursor_set(struct drm_crtc *crtc,
spin_lock_irqsave(&mdp5_crtc->cursor.lock, flags);
old_bo = mdp5_crtc->cursor.scanout_bo;
+ mdp5_crtc->cursor.scanout_bo = cursor_bo;
+ mdp5_crtc->cursor.width = width;
+ mdp5_crtc->cursor.height = height;
+
+ get_roi(crtc, &roi_w, &roi_h);
+
mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_STRIDE(lm), stride);
mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_FORMAT(lm),
MDP5_LM_CURSOR_FORMAT_FORMAT(CURSOR_FMT_ARGB8888));
@@ -461,19 +494,15 @@ static int mdp5_crtc_cursor_set(struct drm_crtc *crtc,
MDP5_LM_CURSOR_IMG_SIZE_SRC_H(height) |
MDP5_LM_CURSOR_IMG_SIZE_SRC_W(width));
mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_SIZE(lm),
- MDP5_LM_CURSOR_SIZE_ROI_H(height) |
- MDP5_LM_CURSOR_SIZE_ROI_W(width));
+ MDP5_LM_CURSOR_SIZE_ROI_H(roi_h) |
+ MDP5_LM_CURSOR_SIZE_ROI_W(roi_w));
mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_BASE_ADDR(lm), cursor_addr);
-
blendcfg = MDP5_LM_CURSOR_BLEND_CONFIG_BLEND_EN;
blendcfg |= MDP5_LM_CURSOR_BLEND_CONFIG_BLEND_TRANSP_EN;
blendcfg |= MDP5_LM_CURSOR_BLEND_CONFIG_BLEND_ALPHA_SEL(cur_alpha);
mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_BLEND_CONFIG(lm), blendcfg);
- mdp5_crtc->cursor.scanout_bo = cursor_bo;
- mdp5_crtc->cursor.width = width;
- mdp5_crtc->cursor.height = height;
spin_unlock_irqrestore(&mdp5_crtc->cursor.lock, flags);
ret = mdp5_ctl_set_cursor(mdp5_crtc->ctl, true);
@@ -497,8 +526,6 @@ static int mdp5_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
struct mdp5_kms *mdp5_kms = get_kms(crtc);
struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
uint32_t flush_mask = mdp_ctl_flush_mask_cursor(0);
- uint32_t xres = crtc->mode.hdisplay;
- uint32_t yres = crtc->mode.vdisplay;
uint32_t roi_w;
uint32_t roi_h;
unsigned long flags;
@@ -507,25 +534,10 @@ static int mdp5_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
if (unlikely(!crtc->state->enable))
return 0;
- x = (x > 0) ? x : 0;
- y = (y > 0) ? y : 0;
+ mdp5_crtc->cursor.x = x = max(x, 0);
+ mdp5_crtc->cursor.y = y = max(y, 0);
- /*
- * Cursor Region Of Interest (ROI) is a plane read from cursor
- * buffer to render. The ROI region is determined by the visiblity of
- * the cursor point. In the default Cursor image the cursor point will
- * be at the top left of the cursor image, unless it is specified
- * otherwise using hotspot feature.
- *
- * If the cursor point reaches the right (xres - x < cursor.width) or
- * bottom (yres - y < cursor.height) boundary of the screen, then ROI
- * width and ROI height need to be evaluated to crop the cursor image
- * accordingly.
- * (xres-x) will be new cursor width when x > (xres - cursor.width)
- * (yres-y) will be new cursor height when y > (yres - cursor.height)
- */
- roi_w = min(mdp5_crtc->cursor.width, xres - x);
- roi_h = min(mdp5_crtc->cursor.height, yres - y);
+ get_roi(crtc, &roi_w, &roi_h);
spin_lock_irqsave(&mdp5_crtc->cursor.lock, flags);
mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_SIZE(mdp5_crtc->lm),
If cursor is set near the edge of the screen, it is not valid to use the new cursor width/height as the ROI dimensions. Split out the ROI calc and use it both cursor_set and cursor_move. Signed-off-by: Rob Clark <robdclark@gmail.com> --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 68 +++++++++++++++++++------------- 1 file changed, 40 insertions(+), 28 deletions(-)