diff mbox

[PATCHv4,2/3] devicetree: Add new ANX7814 SlimPort transmitter binding.

Message ID 1443209368-7135-3-git-send-email-enric.balletbo@collabora.com (mailing list archive)
State New, archived
Headers show

Commit Message

Enric Balletbo Serra Sept. 25, 2015, 7:29 p.m. UTC 
The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
designed for portable devices.

You can add support to your board with current binding.

Example:

	anx7814: anx7814@38 {
		compatible = "analogix,anx7814";
		reg = <0x38>;
		pd-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
		reset-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
	};

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
 .../devicetree/bindings/video/bridge/anx7814.txt   | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/bridge/anx7814.txt
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/video/bridge/anx7814.txt
new file mode 100644
index 0000000..a8cc746
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/bridge/anx7814.txt
@@ -0,0 +1,22 @@ 
+Analogix ANX7814 SlimPort (Full-HD Transmitter)
+-----------------------------------------------
+
+The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
+designed for portable devices.
+
+Required properties:
+
+ - compatible	: "analogix,anx7814"
+ - reg		: I2C address of the device
+ - pd-gpios	: Which GPIO to use for power down
+ - reset-gpios	: Which GPIO to use for reset
+
+Example:
+
+	anx7814: anx7814@38 {
+		compatible = "analogix,anx7814";
+		reg = <0x38>;
+		pd-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+