diff mbox

[v3,6/7] drm/i2c: adv7511: Change number of DSI lanes dynamically

Message ID 1457521038-5906-7-git-send-email-architt@codeaurora.org (mailing list archive)
State New, archived
Headers show

Commit Message

Archit Taneja March 9, 2016, 10:57 a.m. UTC 
Lower modes on ADV7533 require lower number of DSI lanes for correct
operation. If ADV7533 is being used with 4 DSI lanes, then switch the
lanes to 3 when the target mode's pixel clock is less than 80 Mhz.

Based on patch by Andy Green <andy.green@linaro.org>

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/i2c/adv7511.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox

Patch

diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
index 88918ae..ca9e862 100644
--- a/drivers/gpu/drm/i2c/adv7511.c
+++ b/drivers/gpu/drm/i2c/adv7511.c
@@ -863,6 +863,26 @@  static void adv7511_mode_set(struct adv7511 *adv7511,
 	regmap_update_bits(adv7511->regmap, 0x17,
 		0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
 
+	if (adv7511->type == ADV7533 && adv7511->num_dsi_lanes == 4) {
+		struct mipi_dsi_device *dsi = adv7511->dsi;
+		int lanes, ret;
+
+		if (adj_mode->clock > 80000)
+			lanes = 4;
+		else
+			lanes = 3;
+
+		if (lanes != dsi->lanes) {
+			mipi_dsi_detach(dsi);
+			dsi->lanes = lanes;
+			ret = mipi_dsi_attach(dsi);
+			if (ret) {
+				DRM_ERROR("Failed to change host lanes\n");
+				return;
+			}
+		}
+	}
+
 	drm_mode_copy(&adv7511->curr_mode, adj_mode);
 
 	/*