| Message ID | 1467896484-5132-2-git-send-email-benjamin.gaignard@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Laurent and Ville, your feedback on this patch would be appreciated in order to get it merged for kernel 4.8 Regards, Benjamin 2016-07-07 15:01 GMT+02:00 Benjamin Gaignard <benjamin.gaignard@linaro.org>: > From: Marek Szyprowski <m.szyprowski@samsung.com> > > version 5: > - remove zpos range check and comeback to 0 to N-1 > normalization algorithm > > version 4: > - make sure that normalized zpos value is stay > in the defined property range and warn user if not > > This patch adds support for generic plane's zpos property property with > well-defined semantics: > - added zpos properties to plane and plane state structures > - added helpers for normalizing zpos properties of given set of planes > - well defined semantics: planes are sorted by zpos values and then plane > id value if zpos equals > > Normalized zpos values are calculated automatically when generic > muttable zpos property has been initialized. Drivers can simply use > plane_state->normalized_zpos in their atomic_check and/or plane_update > callbacks without any additional calls to DRM core. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > > Compare to Marek's original patch zpos property is now specific to each > plane and no more to the core. > Normalize function take care of the range of per plane defined range > before set normalized_zpos. > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> > > Cc: Inki Dae <inki.dae@samsung.com> > Cc: Daniel Vetter <daniel@ffwll.ch> > Cc: Ville Syrjala <ville.syrjala@linux.intel.com> > Cc: Joonyoung Shim <jy0922.shim@samsung.com> > Cc: Seung-Woo Kim <sw0312.kim@samsung.com> > Cc: Andrzej Hajda <a.hajda@samsung.com> > Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> > Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> > Cc: Gustavo Padovan <gustavo@padovan.org> > Cc: vincent.abriou@st.com > Cc: fabien.dessenne@st.com > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > drivers/gpu/drm/Makefile | 2 +- > drivers/gpu/drm/drm_atomic.c | 4 + > drivers/gpu/drm/drm_atomic_helper.c | 6 + > drivers/gpu/drm/drm_blend.c | 227 ++++++++++++++++++++++++++++++++++++ > drivers/gpu/drm/drm_crtc_internal.h | 4 + > include/drm/drm_crtc.h | 30 +++++ > 6 files changed, 272 insertions(+), 1 deletion(-) > create mode 100644 drivers/gpu/drm/drm_blend.c > > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile > index e3dba6f..7fbcf3f 100644 > --- a/drivers/gpu/drm/Makefile > +++ b/drivers/gpu/drm/Makefile > @@ -2,7 +2,7 @@ > # Makefile for the drm device driver. This driver provides support for the > # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. > > -drm-y := drm_auth.o drm_bufs.o drm_cache.o \ > +drm-y := drm_auth.o drm_bufs.o drm_blend.o drm_cache.o \ > drm_context.o drm_dma.o \ > drm_fops.o drm_gem.o drm_ioctl.o drm_irq.o \ > drm_lock.o drm_memory.o drm_drv.o drm_vm.o \ > diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c > index 3cee084..e503b8f 100644 > --- a/drivers/gpu/drm/drm_atomic.c > +++ b/drivers/gpu/drm/drm_atomic.c > @@ -712,6 +712,8 @@ int drm_atomic_plane_set_property(struct drm_plane *plane, > state->src_h = val; > } else if (property == config->rotation_property) { > state->rotation = val; > + } else if (property == plane->zpos_property) { > + state->zpos = val; > } else if (plane->funcs->atomic_set_property) { > return plane->funcs->atomic_set_property(plane, state, > property, val); > @@ -768,6 +770,8 @@ drm_atomic_plane_get_property(struct drm_plane *plane, > *val = state->src_h; > } else if (property == config->rotation_property) { > *val = state->rotation; > + } else if (property == plane->zpos_property) { > + *val = state->zpos; > } else if (plane->funcs->atomic_get_property) { > return plane->funcs->atomic_get_property(plane, state, property, val); > } else { > diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c > index de7fddc..0694ae1 100644 > --- a/drivers/gpu/drm/drm_atomic_helper.c > +++ b/drivers/gpu/drm/drm_atomic_helper.c > @@ -32,6 +32,8 @@ > #include <drm/drm_atomic_helper.h> > #include <linux/fence.h> > > +#include "drm_crtc_internal.h" > + > /** > * DOC: overview > * > @@ -592,6 +594,10 @@ drm_atomic_helper_check_planes(struct drm_device *dev, > struct drm_plane_state *plane_state; > int i, ret = 0; > > + ret = drm_atomic_helper_normalize_zpos(dev, state); > + if (ret) > + return ret; > + > for_each_plane_in_state(state, plane, plane_state, i) { > const struct drm_plane_helper_funcs *funcs; > > diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c > new file mode 100644 > index 0000000..5ae6e0e > --- /dev/null > +++ b/drivers/gpu/drm/drm_blend.c > @@ -0,0 +1,227 @@ > +/* > + * Copyright (C) 2016 Samsung Electronics Co.Ltd > + * Authors: > + * Marek Szyprowski <m.szyprowski@samsung.com> > + * > + * DRM core plane blending related functions > + * > + * Permission to use, copy, modify, distribute, and sell this software and its > + * documentation for any purpose is hereby granted without fee, provided that > + * the above copyright notice appear in all copies and that both that copyright > + * notice and this permission notice appear in supporting documentation, and > + * that the name of the copyright holders not be used in advertising or > + * publicity pertaining to distribution of the software without specific, > + * written prior permission. The copyright holders make no representations > + * about the suitability of this software for any purpose. It is provided "as > + * is" without express or implied warranty. > + * > + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, > + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO > + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR > + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, > + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER > + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE > + * OF THIS SOFTWARE. > + */ > +#include <drm/drmP.h> > +#include <drm/drm_atomic.h> > +#include <drm/drm_crtc.h> > +#include <linux/export.h> > +#include <linux/slab.h> > +#include <linux/sort.h> > + > +#include "drm_internal.h" > + > +/** > + * drm_plane_create_zpos_property - create mutable zpos property > + * @plane: drm plane > + * @min: minimal possible value of zpos property > + * @max: maximal possible value of zpos property > + * > + * This function initializes generic mutable zpos property and enables support > + * for it in drm core. Drivers can then attach this property to planes to enable > + * support for configurable planes arrangement during blending operation. > + * Once mutable zpos property has been enabled, the DRM core will automatically > + * calculate drm_plane_state->normalized_zpos values. Usually min should be set > + * to 0 and max to maximal number of planes for given crtc - 1. > + * > + * If zpos of some planes cannot be changed (like fixed background or > + * cursor/topmost planes), driver should adjust min/max values and assign those > + * planes immutable zpos property with lower or higher values (for more > + * information, see drm_mode_create_zpos_immutable_property() function). In such > + * case driver should also assign proper initial zpos values for all planes in > + * its plane_reset() callback, so the planes will be always sorted properly. > + * > + * Returns: > + * Zero on success, negative errno on failure. > + */ > +int drm_plane_create_zpos_property(struct drm_plane *plane, > + unsigned int min, unsigned int max) > +{ > + struct drm_property *prop; > + > + prop = drm_property_create_range(plane->dev, 0, "zpos", min, max); > + if (!prop) > + return -ENOMEM; > + > + drm_object_attach_property(&plane->base, prop, min); > + > + plane->zpos_property = prop; > + return 0; > +} > +EXPORT_SYMBOL(drm_plane_create_zpos_property); > + > +/** > + * drm_plane_create_zpos_immutable_property - create immuttable zpos property > + * @plane: drm plane > + * @min: minimal possible value of zpos property > + * @max: maximal possible value of zpos property > + * > + * This function initializes generic immutable zpos property and enables > + * support for it in drm core. Using this property driver lets userspace > + * to get the arrangement of the planes for blending operation and notifies > + * it that the hardware (or driver) doesn't support changing of the planes' > + * order. > + * > + * Returns: > + * Zero on success, negative errno on failure. > + */ > +int drm_plane_create_zpos_immutable_property(struct drm_plane *plane, > + unsigned int min, unsigned int max) > +{ > + struct drm_property *prop; > + > + prop = drm_property_create_range(plane->dev, DRM_MODE_PROP_IMMUTABLE, > + "zpos", min, max); > + if (!prop) > + return -ENOMEM; > + > + drm_object_attach_property(&plane->base, prop, min); > + > + plane->zpos_property = prop; > + return 0; > +} > +EXPORT_SYMBOL(drm_plane_create_zpos_immutable_property); > + > +static int drm_atomic_state_zpos_cmp(const void *a, const void *b) > +{ > + const struct drm_plane_state *sa = *(struct drm_plane_state **)a; > + const struct drm_plane_state *sb = *(struct drm_plane_state **)b; > + > + if (sa->zpos != sb->zpos) > + return sa->zpos - sb->zpos; > + else > + return sa->plane->base.id - sb->plane->base.id; > +} > + > +/** > + * drm_atomic_helper_crtc_normalize_zpos - calculate normalized zpos values > + * @crtc: crtc with planes, which have to be considered for normalization > + * @crtc_state: new atomic state to apply > + * > + * This function checks new states of all planes assigned to given crtc and > + * calculates normalized zpos value for them. Planes are compared first by their > + * zpos values, then by plane id (if zpos equals). Plane with lowest zpos value > + * is at the bottom. The plane_state->normalized_zpos is then filled with unique > + * values from 0 to number of active planes in crtc minus one. > + * > + * RETURNS > + * Zero for success or -errno > + */ > +int drm_atomic_helper_crtc_normalize_zpos(struct drm_crtc *crtc, > + struct drm_crtc_state *crtc_state) > +{ > + struct drm_atomic_state *state = crtc_state->state; > + struct drm_device *dev = crtc->dev; > + int total_planes = dev->mode_config.num_total_plane; > + struct drm_plane_state **states; > + struct drm_plane *plane; > + int i, n = 0; > + int ret = 0; > + > + DRM_DEBUG_ATOMIC("[CRTC:%d:%s] calculating normalized zpos values\n", > + crtc->base.id, crtc->name); > + > + states = kmalloc_array(total_planes, sizeof(*states), GFP_TEMPORARY); > + if (!states) > + return -ENOMEM; > + > + /* > + * Normalization process might create new states for planes which > + * normalized_zpos has to be recalculated. > + */ > + drm_for_each_plane_mask(plane, dev, crtc_state->plane_mask) { > + struct drm_plane_state *plane_state = > + drm_atomic_get_plane_state(state, plane); > + if (IS_ERR(plane_state)) { > + ret = PTR_ERR(plane_state); > + goto done; > + } > + states[n++] = plane_state; > + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] processing zpos value %d\n", > + plane->base.id, plane->name, > + plane_state->zpos); > + } > + > + sort(states, n, sizeof(*states), drm_atomic_state_zpos_cmp, NULL); > + > + for (i = 0; i < n; i++) { > + plane = states[i]->plane; > + > + states[i]->normalized_zpos = i; > + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] normalized zpos value %d\n", > + plane->base.id, plane->name, i); > + } > + crtc_state->zpos_changed = true; > + > +done: > + kfree(states); > + return ret; > +} > +EXPORT_SYMBOL(drm_atomic_helper_crtc_normalize_zpos); > + > +/** > + * drm_atomic_helper_normalize_zpos - calculate normalized zpos values for all > + * crtcs > + * @dev: DRM device > + * @state: atomic state of DRM device > + * > + * This function calculates normalized zpos value for all modified planes in > + * the provided atomic state of DRM device. For more information, see > + * drm_atomic_helper_crtc_normalize_zpos() function. > + * > + * RETURNS > + * Zero for success or -errno > + */ > +int drm_atomic_helper_normalize_zpos(struct drm_device *dev, > + struct drm_atomic_state *state) > +{ > + struct drm_crtc *crtc; > + struct drm_crtc_state *crtc_state; > + struct drm_plane *plane; > + struct drm_plane_state *plane_state; > + int i, ret = 0; > + > + for_each_plane_in_state(state, plane, plane_state, i) { > + crtc = plane_state->crtc; > + if (!crtc) > + continue; > + if (plane->state->zpos != plane_state->zpos) { > + crtc_state = > + drm_atomic_get_existing_crtc_state(state, crtc); > + crtc_state->zpos_changed = true; > + } > + } > + > + for_each_crtc_in_state(state, crtc, crtc_state, i) { > + if (crtc_state->plane_mask != crtc->state->plane_mask || > + crtc_state->zpos_changed) { > + ret = drm_atomic_helper_crtc_normalize_zpos(crtc, > + crtc_state); > + if (ret) > + return ret; > + } > + } > + return 0; > +} > +EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos); > diff --git a/drivers/gpu/drm/drm_crtc_internal.h b/drivers/gpu/drm/drm_crtc_internal.h > index 47a500b..0c34e6d 100644 > --- a/drivers/gpu/drm/drm_crtc_internal.h > +++ b/drivers/gpu/drm/drm_crtc_internal.h > @@ -128,3 +128,7 @@ int drm_mode_atomic_ioctl(struct drm_device *dev, > > int drm_modeset_register_all(struct drm_device *dev); > void drm_modeset_unregister_all(struct drm_device *dev); > + > +/* drm_blend.c */ > +int drm_atomic_helper_normalize_zpos(struct drm_device *dev, > + struct drm_atomic_state *state); > diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h > index f5469d3..3936ddf 100644 > --- a/include/drm/drm_crtc.h > +++ b/include/drm/drm_crtc.h > @@ -308,6 +308,7 @@ struct drm_plane_helper_funcs; > * @mode_changed: crtc_state->mode or crtc_state->enable has been changed > * @active_changed: crtc_state->active has been toggled. > * @connectors_changed: connectors to this crtc have been updated > + * @zpos_changed: zpos values of planes on this crtc have been updated > * @color_mgmt_changed: color management properties have changed (degamma or > * gamma LUT or CSC matrix) > * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes > @@ -344,6 +345,7 @@ struct drm_crtc_state { > bool mode_changed : 1; > bool active_changed : 1; > bool connectors_changed : 1; > + bool zpos_changed : 1; > bool color_mgmt_changed : 1; > > /* attached planes bitmask: > @@ -1396,6 +1398,9 @@ struct drm_connector { > * @src_w: width of visible portion of plane (in 16.16) > * @src_h: height of visible portion of plane (in 16.16) > * @rotation: rotation of the plane > + * @zpos: priority of the given plane on crtc (optional) > + * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1 > + * for given crtc > * @state: backpointer to global drm_atomic_state > */ > struct drm_plane_state { > @@ -1416,6 +1421,10 @@ struct drm_plane_state { > /* Plane rotation */ > unsigned int rotation; > > + /* Plane zpos */ > + unsigned int zpos; > + unsigned int normalized_zpos; > + > struct drm_atomic_state *state; > }; > > @@ -1675,6 +1684,7 @@ enum drm_plane_type { > * @properties: property tracking for this plane > * @type: type of plane (overlay, primary, cursor) > * @state: current atomic state for this plane > + * @zpos_property: zpos property for this plane > * @helper_private: mid-layer private data > */ > struct drm_plane { > @@ -1716,6 +1726,8 @@ struct drm_plane { > const struct drm_plane_helper_funcs *helper_private; > > struct drm_plane_state *state; > + > + struct drm_property *zpos_property; > }; > > /** > @@ -2773,6 +2785,24 @@ extern void drm_crtc_enable_color_mgmt(struct drm_crtc *crtc, > uint degamma_lut_size, > bool has_ctm, > uint gamma_lut_size); > + > +int drm_plane_atomic_set_zpos_property(struct drm_plane *plane, > + struct drm_plane_state *state, > + struct drm_property *property, > + uint64_t val); > + > +int drm_plane_atomic_get_zpos_property(struct drm_plane *plane, > + const struct drm_plane_state *state, > + struct drm_property *property, > + uint64_t *val); > + > +int drm_plane_create_zpos_property(struct drm_plane *plane, > + unsigned int min, unsigned int max); > + > +int drm_plane_create_zpos_immutable_property(struct drm_plane *plane, > + unsigned int min, > + unsigned int max); > + > /* Helpers */ > struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, > uint32_t id, uint32_t type); > -- > 1.9.1 >
On Thu, Jul 07, 2016 at 03:01:21PM +0200, Benjamin Gaignard wrote: > From: Marek Szyprowski <m.szyprowski@samsung.com> > > version 5: > - remove zpos range check and comeback to 0 to N-1 > normalization algorithm > > version 4: > - make sure that normalized zpos value is stay > in the defined property range and warn user if not > > This patch adds support for generic plane's zpos property property with > well-defined semantics: > - added zpos properties to plane and plane state structures > - added helpers for normalizing zpos properties of given set of planes > - well defined semantics: planes are sorted by zpos values and then plane > id value if zpos equals > > Normalized zpos values are calculated automatically when generic > muttable zpos property has been initialized. Drivers can simply use > plane_state->normalized_zpos in their atomic_check and/or plane_update > callbacks without any additional calls to DRM core. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > > Compare to Marek's original patch zpos property is now specific to each > plane and no more to the core. > Normalize function take care of the range of per plane defined range > before set normalized_zpos. > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> > > Cc: Inki Dae <inki.dae@samsung.com> > Cc: Daniel Vetter <daniel@ffwll.ch> > Cc: Ville Syrjala <ville.syrjala@linux.intel.com> > Cc: Joonyoung Shim <jy0922.shim@samsung.com> > Cc: Seung-Woo Kim <sw0312.kim@samsung.com> > Cc: Andrzej Hajda <a.hajda@samsung.com> > Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> > Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> > Cc: Gustavo Padovan <gustavo@padovan.org> > Cc: vincent.abriou@st.com > Cc: fabien.dessenne@st.com > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > drivers/gpu/drm/Makefile | 2 +- > drivers/gpu/drm/drm_atomic.c | 4 + > drivers/gpu/drm/drm_atomic_helper.c | 6 + > drivers/gpu/drm/drm_blend.c | 227 ++++++++++++++++++++++++++++++++++++ > drivers/gpu/drm/drm_crtc_internal.h | 4 + > include/drm/drm_crtc.h | 30 +++++ > 6 files changed, 272 insertions(+), 1 deletion(-) > create mode 100644 drivers/gpu/drm/drm_blend.c > > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile > index e3dba6f..7fbcf3f 100644 > --- a/drivers/gpu/drm/Makefile > +++ b/drivers/gpu/drm/Makefile > @@ -2,7 +2,7 @@ > # Makefile for the drm device driver. This driver provides support for the > # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. > > -drm-y := drm_auth.o drm_bufs.o drm_cache.o \ > +drm-y := drm_auth.o drm_bufs.o drm_blend.o drm_cache.o \ > drm_context.o drm_dma.o \ > drm_fops.o drm_gem.o drm_ioctl.o drm_irq.o \ > drm_lock.o drm_memory.o drm_drv.o drm_vm.o \ > diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c > index 3cee084..e503b8f 100644 > --- a/drivers/gpu/drm/drm_atomic.c > +++ b/drivers/gpu/drm/drm_atomic.c > @@ -712,6 +712,8 @@ int drm_atomic_plane_set_property(struct drm_plane *plane, > state->src_h = val; > } else if (property == config->rotation_property) { > state->rotation = val; > + } else if (property == plane->zpos_property) { > + state->zpos = val; > } else if (plane->funcs->atomic_set_property) { > return plane->funcs->atomic_set_property(plane, state, > property, val); > @@ -768,6 +770,8 @@ drm_atomic_plane_get_property(struct drm_plane *plane, > *val = state->src_h; > } else if (property == config->rotation_property) { > *val = state->rotation; > + } else if (property == plane->zpos_property) { > + *val = state->zpos; > } else if (plane->funcs->atomic_get_property) { > return plane->funcs->atomic_get_property(plane, state, property, val); > } else { > diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c > index de7fddc..0694ae1 100644 > --- a/drivers/gpu/drm/drm_atomic_helper.c > +++ b/drivers/gpu/drm/drm_atomic_helper.c > @@ -32,6 +32,8 @@ > #include <drm/drm_atomic_helper.h> > #include <linux/fence.h> > > +#include "drm_crtc_internal.h" > + > /** > * DOC: overview > * > @@ -592,6 +594,10 @@ drm_atomic_helper_check_planes(struct drm_device *dev, > struct drm_plane_state *plane_state; > int i, ret = 0; > > + ret = drm_atomic_helper_normalize_zpos(dev, state); > + if (ret) > + return ret; > + > for_each_plane_in_state(state, plane, plane_state, i) { > const struct drm_plane_helper_funcs *funcs; > > diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c > new file mode 100644 > index 0000000..5ae6e0e > --- /dev/null > +++ b/drivers/gpu/drm/drm_blend.c > @@ -0,0 +1,227 @@ > +/* > + * Copyright (C) 2016 Samsung Electronics Co.Ltd > + * Authors: > + * Marek Szyprowski <m.szyprowski@samsung.com> > + * > + * DRM core plane blending related functions > + * > + * Permission to use, copy, modify, distribute, and sell this software and its > + * documentation for any purpose is hereby granted without fee, provided that > + * the above copyright notice appear in all copies and that both that copyright > + * notice and this permission notice appear in supporting documentation, and > + * that the name of the copyright holders not be used in advertising or > + * publicity pertaining to distribution of the software without specific, > + * written prior permission. The copyright holders make no representations > + * about the suitability of this software for any purpose. It is provided "as > + * is" without express or implied warranty. > + * > + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, > + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO > + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR > + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, > + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER > + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE > + * OF THIS SOFTWARE. > + */ > +#include <drm/drmP.h> > +#include <drm/drm_atomic.h> > +#include <drm/drm_crtc.h> > +#include <linux/export.h> > +#include <linux/slab.h> > +#include <linux/sort.h> > + > +#include "drm_internal.h" > + > +/** > + * drm_plane_create_zpos_property - create mutable zpos property > + * @plane: drm plane > + * @min: minimal possible value of zpos property > + * @max: maximal possible value of zpos property > + * > + * This function initializes generic mutable zpos property and enables support > + * for it in drm core. Drivers can then attach this property to planes to enable > + * support for configurable planes arrangement during blending operation. > + * Once mutable zpos property has been enabled, the DRM core will automatically > + * calculate drm_plane_state->normalized_zpos values. Usually min should be set > + * to 0 and max to maximal number of planes for given crtc - 1. > + * > + * If zpos of some planes cannot be changed (like fixed background or > + * cursor/topmost planes), driver should adjust min/max values and assign those > + * planes immutable zpos property with lower or higher values (for more > + * information, see drm_mode_create_zpos_immutable_property() function). In such > + * case driver should also assign proper initial zpos values for all planes in > + * its plane_reset() callback, so the planes will be always sorted properly. > + * > + * Returns: > + * Zero on success, negative errno on failure. > + */ > +int drm_plane_create_zpos_property(struct drm_plane *plane, > + unsigned int min, unsigned int max) I think we also want to pass the initial value here, and set the plane state accordingly. > +{ > + struct drm_property *prop; > + > + prop = drm_property_create_range(plane->dev, 0, "zpos", min, max); > + if (!prop) > + return -ENOMEM; > + > + drm_object_attach_property(&plane->base, prop, min); > + > + plane->zpos_property = prop; > + return 0; > +} > +EXPORT_SYMBOL(drm_plane_create_zpos_property); > + > +/** > + * drm_plane_create_zpos_immutable_property - create immuttable zpos property > + * @plane: drm plane > + * @min: minimal possible value of zpos property > + * @max: maximal possible value of zpos property > + * > + * This function initializes generic immutable zpos property and enables > + * support for it in drm core. Using this property driver lets userspace > + * to get the arrangement of the planes for blending operation and notifies > + * it that the hardware (or driver) doesn't support changing of the planes' > + * order. > + * > + * Returns: > + * Zero on success, negative errno on failure. > + */ > +int drm_plane_create_zpos_immutable_property(struct drm_plane *plane, > + unsigned int min, unsigned int max) What's the point of passing min/max here? I would think we'd just want the one value. And the earlier comment about the plane state holds here as well. > +{ > + struct drm_property *prop; > + > + prop = drm_property_create_range(plane->dev, DRM_MODE_PROP_IMMUTABLE, > + "zpos", min, max); > + if (!prop) > + return -ENOMEM; > + > + drm_object_attach_property(&plane->base, prop, min); > + > + plane->zpos_property = prop; > + return 0; > +} > +EXPORT_SYMBOL(drm_plane_create_zpos_immutable_property); > + > +static int drm_atomic_state_zpos_cmp(const void *a, const void *b) > +{ > + const struct drm_plane_state *sa = *(struct drm_plane_state **)a; > + const struct drm_plane_state *sb = *(struct drm_plane_state **)b; > + > + if (sa->zpos != sb->zpos) > + return sa->zpos - sb->zpos; > + else > + return sa->plane->base.id - sb->plane->base.id; > +} > + > +/** > + * drm_atomic_helper_crtc_normalize_zpos - calculate normalized zpos values > + * @crtc: crtc with planes, which have to be considered for normalization > + * @crtc_state: new atomic state to apply > + * > + * This function checks new states of all planes assigned to given crtc and > + * calculates normalized zpos value for them. Planes are compared first by their > + * zpos values, then by plane id (if zpos equals). Plane with lowest zpos value > + * is at the bottom. The plane_state->normalized_zpos is then filled with unique > + * values from 0 to number of active planes in crtc minus one. > + * > + * RETURNS > + * Zero for success or -errno > + */ > +int drm_atomic_helper_crtc_normalize_zpos(struct drm_crtc *crtc, > + struct drm_crtc_state *crtc_state) > +{ > + struct drm_atomic_state *state = crtc_state->state; > + struct drm_device *dev = crtc->dev; > + int total_planes = dev->mode_config.num_total_plane; > + struct drm_plane_state **states; > + struct drm_plane *plane; > + int i, n = 0; > + int ret = 0; > + > + DRM_DEBUG_ATOMIC("[CRTC:%d:%s] calculating normalized zpos values\n", > + crtc->base.id, crtc->name); > + > + states = kmalloc_array(total_planes, sizeof(*states), GFP_TEMPORARY); > + if (!states) > + return -ENOMEM; > + > + /* > + * Normalization process might create new states for planes which > + * normalized_zpos has to be recalculated. > + */ > + drm_for_each_plane_mask(plane, dev, crtc_state->plane_mask) { > + struct drm_plane_state *plane_state = > + drm_atomic_get_plane_state(state, plane); > + if (IS_ERR(plane_state)) { > + ret = PTR_ERR(plane_state); > + goto done; > + } > + states[n++] = plane_state; > + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] processing zpos value %d\n", > + plane->base.id, plane->name, > + plane_state->zpos); > + } > + > + sort(states, n, sizeof(*states), drm_atomic_state_zpos_cmp, NULL); > + > + for (i = 0; i < n; i++) { > + plane = states[i]->plane; > + > + states[i]->normalized_zpos = i; > + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] normalized zpos value %d\n", > + plane->base.id, plane->name, i); > + } > + crtc_state->zpos_changed = true; This needs to be reset back in duplicate_state. I did those changes locally, and then I went ahead and implemented zpos support for some Intel platforms, mainly to make sure this thing is good enough for us. It doesn't result in the prettiest thing, but it does appear to work at least: git://github.com/vsyrjala/linux.git vlv_chv_zpos I still need to write some actual igt test for this stuff I think. And then we have the "do we have actual userspace for this?" problem. Was there an atomic weston branch somewhere that can use zpos? > + > +done: > + kfree(states); > + return ret; > +} > +EXPORT_SYMBOL(drm_atomic_helper_crtc_normalize_zpos); > + > +/** > + * drm_atomic_helper_normalize_zpos - calculate normalized zpos values for all > + * crtcs > + * @dev: DRM device > + * @state: atomic state of DRM device > + * > + * This function calculates normalized zpos value for all modified planes in > + * the provided atomic state of DRM device. For more information, see > + * drm_atomic_helper_crtc_normalize_zpos() function. > + * > + * RETURNS > + * Zero for success or -errno > + */ > +int drm_atomic_helper_normalize_zpos(struct drm_device *dev, > + struct drm_atomic_state *state) > +{ > + struct drm_crtc *crtc; > + struct drm_crtc_state *crtc_state; > + struct drm_plane *plane; > + struct drm_plane_state *plane_state; > + int i, ret = 0; > + > + for_each_plane_in_state(state, plane, plane_state, i) { > + crtc = plane_state->crtc; > + if (!crtc) > + continue; > + if (plane->state->zpos != plane_state->zpos) { > + crtc_state = > + drm_atomic_get_existing_crtc_state(state, crtc); > + crtc_state->zpos_changed = true; > + } > + } > + > + for_each_crtc_in_state(state, crtc, crtc_state, i) { > + if (crtc_state->plane_mask != crtc->state->plane_mask || > + crtc_state->zpos_changed) { > + ret = drm_atomic_helper_crtc_normalize_zpos(crtc, > + crtc_state); > + if (ret) > + return ret; > + } > + } > + return 0; > +} > +EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos); > diff --git a/drivers/gpu/drm/drm_crtc_internal.h b/drivers/gpu/drm/drm_crtc_internal.h > index 47a500b..0c34e6d 100644 > --- a/drivers/gpu/drm/drm_crtc_internal.h > +++ b/drivers/gpu/drm/drm_crtc_internal.h > @@ -128,3 +128,7 @@ int drm_mode_atomic_ioctl(struct drm_device *dev, > > int drm_modeset_register_all(struct drm_device *dev); > void drm_modeset_unregister_all(struct drm_device *dev); > + > +/* drm_blend.c */ > +int drm_atomic_helper_normalize_zpos(struct drm_device *dev, > + struct drm_atomic_state *state); > diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h > index f5469d3..3936ddf 100644 > --- a/include/drm/drm_crtc.h > +++ b/include/drm/drm_crtc.h > @@ -308,6 +308,7 @@ struct drm_plane_helper_funcs; > * @mode_changed: crtc_state->mode or crtc_state->enable has been changed > * @active_changed: crtc_state->active has been toggled. > * @connectors_changed: connectors to this crtc have been updated > + * @zpos_changed: zpos values of planes on this crtc have been updated > * @color_mgmt_changed: color management properties have changed (degamma or > * gamma LUT or CSC matrix) > * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes > @@ -344,6 +345,7 @@ struct drm_crtc_state { > bool mode_changed : 1; > bool active_changed : 1; > bool connectors_changed : 1; > + bool zpos_changed : 1; > bool color_mgmt_changed : 1; > > /* attached planes bitmask: > @@ -1396,6 +1398,9 @@ struct drm_connector { > * @src_w: width of visible portion of plane (in 16.16) > * @src_h: height of visible portion of plane (in 16.16) > * @rotation: rotation of the plane > + * @zpos: priority of the given plane on crtc (optional) > + * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1 > + * for given crtc > * @state: backpointer to global drm_atomic_state > */ > struct drm_plane_state { > @@ -1416,6 +1421,10 @@ struct drm_plane_state { > /* Plane rotation */ > unsigned int rotation; > > + /* Plane zpos */ > + unsigned int zpos; > + unsigned int normalized_zpos; > + > struct drm_atomic_state *state; > }; > > @@ -1675,6 +1684,7 @@ enum drm_plane_type { > * @properties: property tracking for this plane > * @type: type of plane (overlay, primary, cursor) > * @state: current atomic state for this plane > + * @zpos_property: zpos property for this plane > * @helper_private: mid-layer private data > */ > struct drm_plane { > @@ -1716,6 +1726,8 @@ struct drm_plane { > const struct drm_plane_helper_funcs *helper_private; > > struct drm_plane_state *state; > + > + struct drm_property *zpos_property; > }; > > /** > @@ -2773,6 +2785,24 @@ extern void drm_crtc_enable_color_mgmt(struct drm_crtc *crtc, > uint degamma_lut_size, > bool has_ctm, > uint gamma_lut_size); > + > +int drm_plane_atomic_set_zpos_property(struct drm_plane *plane, > + struct drm_plane_state *state, > + struct drm_property *property, > + uint64_t val); > + > +int drm_plane_atomic_get_zpos_property(struct drm_plane *plane, > + const struct drm_plane_state *state, > + struct drm_property *property, > + uint64_t *val); > + > +int drm_plane_create_zpos_property(struct drm_plane *plane, > + unsigned int min, unsigned int max); > + > +int drm_plane_create_zpos_immutable_property(struct drm_plane *plane, > + unsigned int min, > + unsigned int max); > + > /* Helpers */ > struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, > uint32_t id, uint32_t type); > -- > 1.9.1
I will merge your changes for the next version, thanks zpos property is not a new property sti, exynos and r-car already used it. I know some not upstreamed code use it to manage zordering. For example I have wrote an Android hwcomposer using this property: https://git.linaro.org/people/benjamin.gaignard/hwcomposer.git/blob/HEAD:/hwcomposer.cpp#l591 I hope those patches could help to standardize zordering in userland. 2016-07-20 12:11 GMT+02:00 Ville Syrjälä <ville.syrjala@linux.intel.com>: > On Thu, Jul 07, 2016 at 03:01:21PM +0200, Benjamin Gaignard wrote: >> From: Marek Szyprowski <m.szyprowski@samsung.com> >> >> version 5: >> - remove zpos range check and comeback to 0 to N-1 >> normalization algorithm >> >> version 4: >> - make sure that normalized zpos value is stay >> in the defined property range and warn user if not >> >> This patch adds support for generic plane's zpos property property with >> well-defined semantics: >> - added zpos properties to plane and plane state structures >> - added helpers for normalizing zpos properties of given set of planes >> - well defined semantics: planes are sorted by zpos values and then plane >> id value if zpos equals >> >> Normalized zpos values are calculated automatically when generic >> muttable zpos property has been initialized. Drivers can simply use >> plane_state->normalized_zpos in their atomic_check and/or plane_update >> callbacks without any additional calls to DRM core. >> >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >> >> Compare to Marek's original patch zpos property is now specific to each >> plane and no more to the core. >> Normalize function take care of the range of per plane defined range >> before set normalized_zpos. >> >> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> >> >> Cc: Inki Dae <inki.dae@samsung.com> >> Cc: Daniel Vetter <daniel@ffwll.ch> >> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> >> Cc: Joonyoung Shim <jy0922.shim@samsung.com> >> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> >> Cc: Andrzej Hajda <a.hajda@samsung.com> >> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> >> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> >> Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> >> Cc: Gustavo Padovan <gustavo@padovan.org> >> Cc: vincent.abriou@st.com >> Cc: fabien.dessenne@st.com >> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >> --- >> drivers/gpu/drm/Makefile | 2 +- >> drivers/gpu/drm/drm_atomic.c | 4 + >> drivers/gpu/drm/drm_atomic_helper.c | 6 + >> drivers/gpu/drm/drm_blend.c | 227 ++++++++++++++++++++++++++++++++++++ >> drivers/gpu/drm/drm_crtc_internal.h | 4 + >> include/drm/drm_crtc.h | 30 +++++ >> 6 files changed, 272 insertions(+), 1 deletion(-) >> create mode 100644 drivers/gpu/drm/drm_blend.c >> >> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile >> index e3dba6f..7fbcf3f 100644 >> --- a/drivers/gpu/drm/Makefile >> +++ b/drivers/gpu/drm/Makefile >> @@ -2,7 +2,7 @@ >> # Makefile for the drm device driver. This driver provides support for the >> # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. >> >> -drm-y := drm_auth.o drm_bufs.o drm_cache.o \ >> +drm-y := drm_auth.o drm_bufs.o drm_blend.o drm_cache.o \ >> drm_context.o drm_dma.o \ >> drm_fops.o drm_gem.o drm_ioctl.o drm_irq.o \ >> drm_lock.o drm_memory.o drm_drv.o drm_vm.o \ >> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c >> index 3cee084..e503b8f 100644 >> --- a/drivers/gpu/drm/drm_atomic.c >> +++ b/drivers/gpu/drm/drm_atomic.c >> @@ -712,6 +712,8 @@ int drm_atomic_plane_set_property(struct drm_plane *plane, >> state->src_h = val; >> } else if (property == config->rotation_property) { >> state->rotation = val; >> + } else if (property == plane->zpos_property) { >> + state->zpos = val; >> } else if (plane->funcs->atomic_set_property) { >> return plane->funcs->atomic_set_property(plane, state, >> property, val); >> @@ -768,6 +770,8 @@ drm_atomic_plane_get_property(struct drm_plane *plane, >> *val = state->src_h; >> } else if (property == config->rotation_property) { >> *val = state->rotation; >> + } else if (property == plane->zpos_property) { >> + *val = state->zpos; >> } else if (plane->funcs->atomic_get_property) { >> return plane->funcs->atomic_get_property(plane, state, property, val); >> } else { >> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c >> index de7fddc..0694ae1 100644 >> --- a/drivers/gpu/drm/drm_atomic_helper.c >> +++ b/drivers/gpu/drm/drm_atomic_helper.c >> @@ -32,6 +32,8 @@ >> #include <drm/drm_atomic_helper.h> >> #include <linux/fence.h> >> >> +#include "drm_crtc_internal.h" >> + >> /** >> * DOC: overview >> * >> @@ -592,6 +594,10 @@ drm_atomic_helper_check_planes(struct drm_device *dev, >> struct drm_plane_state *plane_state; >> int i, ret = 0; >> >> + ret = drm_atomic_helper_normalize_zpos(dev, state); >> + if (ret) >> + return ret; >> + >> for_each_plane_in_state(state, plane, plane_state, i) { >> const struct drm_plane_helper_funcs *funcs; >> >> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c >> new file mode 100644 >> index 0000000..5ae6e0e >> --- /dev/null >> +++ b/drivers/gpu/drm/drm_blend.c >> @@ -0,0 +1,227 @@ >> +/* >> + * Copyright (C) 2016 Samsung Electronics Co.Ltd >> + * Authors: >> + * Marek Szyprowski <m.szyprowski@samsung.com> >> + * >> + * DRM core plane blending related functions >> + * >> + * Permission to use, copy, modify, distribute, and sell this software and its >> + * documentation for any purpose is hereby granted without fee, provided that >> + * the above copyright notice appear in all copies and that both that copyright >> + * notice and this permission notice appear in supporting documentation, and >> + * that the name of the copyright holders not be used in advertising or >> + * publicity pertaining to distribution of the software without specific, >> + * written prior permission. The copyright holders make no representations >> + * about the suitability of this software for any purpose. It is provided "as >> + * is" without express or implied warranty. >> + * >> + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, >> + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO >> + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR >> + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, >> + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER >> + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE >> + * OF THIS SOFTWARE. >> + */ >> +#include <drm/drmP.h> >> +#include <drm/drm_atomic.h> >> +#include <drm/drm_crtc.h> >> +#include <linux/export.h> >> +#include <linux/slab.h> >> +#include <linux/sort.h> >> + >> +#include "drm_internal.h" >> + >> +/** >> + * drm_plane_create_zpos_property - create mutable zpos property >> + * @plane: drm plane >> + * @min: minimal possible value of zpos property >> + * @max: maximal possible value of zpos property >> + * >> + * This function initializes generic mutable zpos property and enables support >> + * for it in drm core. Drivers can then attach this property to planes to enable >> + * support for configurable planes arrangement during blending operation. >> + * Once mutable zpos property has been enabled, the DRM core will automatically >> + * calculate drm_plane_state->normalized_zpos values. Usually min should be set >> + * to 0 and max to maximal number of planes for given crtc - 1. >> + * >> + * If zpos of some planes cannot be changed (like fixed background or >> + * cursor/topmost planes), driver should adjust min/max values and assign those >> + * planes immutable zpos property with lower or higher values (for more >> + * information, see drm_mode_create_zpos_immutable_property() function). In such >> + * case driver should also assign proper initial zpos values for all planes in >> + * its plane_reset() callback, so the planes will be always sorted properly. >> + * >> + * Returns: >> + * Zero on success, negative errno on failure. >> + */ >> +int drm_plane_create_zpos_property(struct drm_plane *plane, >> + unsigned int min, unsigned int max) > > I think we also want to pass the initial value here, and set the plane > state accordingly. > >> +{ >> + struct drm_property *prop; >> + >> + prop = drm_property_create_range(plane->dev, 0, "zpos", min, max); >> + if (!prop) >> + return -ENOMEM; >> + >> + drm_object_attach_property(&plane->base, prop, min); >> + >> + plane->zpos_property = prop; >> + return 0; >> +} >> +EXPORT_SYMBOL(drm_plane_create_zpos_property); >> + >> +/** >> + * drm_plane_create_zpos_immutable_property - create immuttable zpos property >> + * @plane: drm plane >> + * @min: minimal possible value of zpos property >> + * @max: maximal possible value of zpos property >> + * >> + * This function initializes generic immutable zpos property and enables >> + * support for it in drm core. Using this property driver lets userspace >> + * to get the arrangement of the planes for blending operation and notifies >> + * it that the hardware (or driver) doesn't support changing of the planes' >> + * order. >> + * >> + * Returns: >> + * Zero on success, negative errno on failure. >> + */ >> +int drm_plane_create_zpos_immutable_property(struct drm_plane *plane, >> + unsigned int min, unsigned int max) > > What's the point of passing min/max here? I would think we'd just want > the one value. And the earlier comment about the plane state holds here > as well. > >> +{ >> + struct drm_property *prop; >> + >> + prop = drm_property_create_range(plane->dev, DRM_MODE_PROP_IMMUTABLE, >> + "zpos", min, max); >> + if (!prop) >> + return -ENOMEM; >> + >> + drm_object_attach_property(&plane->base, prop, min); >> + >> + plane->zpos_property = prop; >> + return 0; >> +} >> +EXPORT_SYMBOL(drm_plane_create_zpos_immutable_property); >> + >> +static int drm_atomic_state_zpos_cmp(const void *a, const void *b) >> +{ >> + const struct drm_plane_state *sa = *(struct drm_plane_state **)a; >> + const struct drm_plane_state *sb = *(struct drm_plane_state **)b; >> + >> + if (sa->zpos != sb->zpos) >> + return sa->zpos - sb->zpos; >> + else >> + return sa->plane->base.id - sb->plane->base.id; >> +} >> + >> +/** >> + * drm_atomic_helper_crtc_normalize_zpos - calculate normalized zpos values >> + * @crtc: crtc with planes, which have to be considered for normalization >> + * @crtc_state: new atomic state to apply >> + * >> + * This function checks new states of all planes assigned to given crtc and >> + * calculates normalized zpos value for them. Planes are compared first by their >> + * zpos values, then by plane id (if zpos equals). Plane with lowest zpos value >> + * is at the bottom. The plane_state->normalized_zpos is then filled with unique >> + * values from 0 to number of active planes in crtc minus one. >> + * >> + * RETURNS >> + * Zero for success or -errno >> + */ >> +int drm_atomic_helper_crtc_normalize_zpos(struct drm_crtc *crtc, >> + struct drm_crtc_state *crtc_state) >> +{ >> + struct drm_atomic_state *state = crtc_state->state; >> + struct drm_device *dev = crtc->dev; >> + int total_planes = dev->mode_config.num_total_plane; >> + struct drm_plane_state **states; >> + struct drm_plane *plane; >> + int i, n = 0; >> + int ret = 0; >> + >> + DRM_DEBUG_ATOMIC("[CRTC:%d:%s] calculating normalized zpos values\n", >> + crtc->base.id, crtc->name); >> + >> + states = kmalloc_array(total_planes, sizeof(*states), GFP_TEMPORARY); >> + if (!states) >> + return -ENOMEM; >> + >> + /* >> + * Normalization process might create new states for planes which >> + * normalized_zpos has to be recalculated. >> + */ >> + drm_for_each_plane_mask(plane, dev, crtc_state->plane_mask) { >> + struct drm_plane_state *plane_state = >> + drm_atomic_get_plane_state(state, plane); >> + if (IS_ERR(plane_state)) { >> + ret = PTR_ERR(plane_state); >> + goto done; >> + } >> + states[n++] = plane_state; >> + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] processing zpos value %d\n", >> + plane->base.id, plane->name, >> + plane_state->zpos); >> + } >> + >> + sort(states, n, sizeof(*states), drm_atomic_state_zpos_cmp, NULL); >> + >> + for (i = 0; i < n; i++) { >> + plane = states[i]->plane; >> + >> + states[i]->normalized_zpos = i; >> + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] normalized zpos value %d\n", >> + plane->base.id, plane->name, i); >> + } >> + crtc_state->zpos_changed = true; > > This needs to be reset back in duplicate_state. > > I did those changes locally, and then I went ahead and implemented zpos > support for some Intel platforms, mainly to make sure this thing is good > enough for us. It doesn't result in the prettiest thing, but it does > appear to work at least: > git://github.com/vsyrjala/linux.git vlv_chv_zpos > > I still need to write some actual igt test for this stuff I think. And > then we have the "do we have actual userspace for this?" problem. Was > there an atomic weston branch somewhere that can use zpos? > >> + >> +done: >> + kfree(states); >> + return ret; >> +} >> +EXPORT_SYMBOL(drm_atomic_helper_crtc_normalize_zpos); >> + >> +/** >> + * drm_atomic_helper_normalize_zpos - calculate normalized zpos values for all >> + * crtcs >> + * @dev: DRM device >> + * @state: atomic state of DRM device >> + * >> + * This function calculates normalized zpos value for all modified planes in >> + * the provided atomic state of DRM device. For more information, see >> + * drm_atomic_helper_crtc_normalize_zpos() function. >> + * >> + * RETURNS >> + * Zero for success or -errno >> + */ >> +int drm_atomic_helper_normalize_zpos(struct drm_device *dev, >> + struct drm_atomic_state *state) >> +{ >> + struct drm_crtc *crtc; >> + struct drm_crtc_state *crtc_state; >> + struct drm_plane *plane; >> + struct drm_plane_state *plane_state; >> + int i, ret = 0; >> + >> + for_each_plane_in_state(state, plane, plane_state, i) { >> + crtc = plane_state->crtc; >> + if (!crtc) >> + continue; >> + if (plane->state->zpos != plane_state->zpos) { >> + crtc_state = >> + drm_atomic_get_existing_crtc_state(state, crtc); >> + crtc_state->zpos_changed = true; >> + } >> + } >> + >> + for_each_crtc_in_state(state, crtc, crtc_state, i) { >> + if (crtc_state->plane_mask != crtc->state->plane_mask || >> + crtc_state->zpos_changed) { >> + ret = drm_atomic_helper_crtc_normalize_zpos(crtc, >> + crtc_state); >> + if (ret) >> + return ret; >> + } >> + } >> + return 0; >> +} >> +EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos); >> diff --git a/drivers/gpu/drm/drm_crtc_internal.h b/drivers/gpu/drm/drm_crtc_internal.h >> index 47a500b..0c34e6d 100644 >> --- a/drivers/gpu/drm/drm_crtc_internal.h >> +++ b/drivers/gpu/drm/drm_crtc_internal.h >> @@ -128,3 +128,7 @@ int drm_mode_atomic_ioctl(struct drm_device *dev, >> >> int drm_modeset_register_all(struct drm_device *dev); >> void drm_modeset_unregister_all(struct drm_device *dev); >> + >> +/* drm_blend.c */ >> +int drm_atomic_helper_normalize_zpos(struct drm_device *dev, >> + struct drm_atomic_state *state); >> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h >> index f5469d3..3936ddf 100644 >> --- a/include/drm/drm_crtc.h >> +++ b/include/drm/drm_crtc.h >> @@ -308,6 +308,7 @@ struct drm_plane_helper_funcs; >> * @mode_changed: crtc_state->mode or crtc_state->enable has been changed >> * @active_changed: crtc_state->active has been toggled. >> * @connectors_changed: connectors to this crtc have been updated >> + * @zpos_changed: zpos values of planes on this crtc have been updated >> * @color_mgmt_changed: color management properties have changed (degamma or >> * gamma LUT or CSC matrix) >> * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes >> @@ -344,6 +345,7 @@ struct drm_crtc_state { >> bool mode_changed : 1; >> bool active_changed : 1; >> bool connectors_changed : 1; >> + bool zpos_changed : 1; >> bool color_mgmt_changed : 1; >> >> /* attached planes bitmask: >> @@ -1396,6 +1398,9 @@ struct drm_connector { >> * @src_w: width of visible portion of plane (in 16.16) >> * @src_h: height of visible portion of plane (in 16.16) >> * @rotation: rotation of the plane >> + * @zpos: priority of the given plane on crtc (optional) >> + * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1 >> + * for given crtc >> * @state: backpointer to global drm_atomic_state >> */ >> struct drm_plane_state { >> @@ -1416,6 +1421,10 @@ struct drm_plane_state { >> /* Plane rotation */ >> unsigned int rotation; >> >> + /* Plane zpos */ >> + unsigned int zpos; >> + unsigned int normalized_zpos; >> + >> struct drm_atomic_state *state; >> }; >> >> @@ -1675,6 +1684,7 @@ enum drm_plane_type { >> * @properties: property tracking for this plane >> * @type: type of plane (overlay, primary, cursor) >> * @state: current atomic state for this plane >> + * @zpos_property: zpos property for this plane >> * @helper_private: mid-layer private data >> */ >> struct drm_plane { >> @@ -1716,6 +1726,8 @@ struct drm_plane { >> const struct drm_plane_helper_funcs *helper_private; >> >> struct drm_plane_state *state; >> + >> + struct drm_property *zpos_property; >> }; >> >> /** >> @@ -2773,6 +2785,24 @@ extern void drm_crtc_enable_color_mgmt(struct drm_crtc *crtc, >> uint degamma_lut_size, >> bool has_ctm, >> uint gamma_lut_size); >> + >> +int drm_plane_atomic_set_zpos_property(struct drm_plane *plane, >> + struct drm_plane_state *state, >> + struct drm_property *property, >> + uint64_t val); >> + >> +int drm_plane_atomic_get_zpos_property(struct drm_plane *plane, >> + const struct drm_plane_state *state, >> + struct drm_property *property, >> + uint64_t *val); >> + >> +int drm_plane_create_zpos_property(struct drm_plane *plane, >> + unsigned int min, unsigned int max); >> + >> +int drm_plane_create_zpos_immutable_property(struct drm_plane *plane, >> + unsigned int min, >> + unsigned int max); >> + >> /* Helpers */ >> struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, >> uint32_t id, uint32_t type); >> -- >> 1.9.1 > > -- > Ville Syrjälä > Intel OTC
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index e3dba6f..7fbcf3f 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -2,7 +2,7 @@ # Makefile for the drm device driver. This driver provides support for the # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. -drm-y := drm_auth.o drm_bufs.o drm_cache.o \ +drm-y := drm_auth.o drm_bufs.o drm_blend.o drm_cache.o \ drm_context.o drm_dma.o \ drm_fops.o drm_gem.o drm_ioctl.o drm_irq.o \ drm_lock.o drm_memory.o drm_drv.o drm_vm.o \ diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 3cee084..e503b8f 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -712,6 +712,8 @@ int drm_atomic_plane_set_property(struct drm_plane *plane, state->src_h = val; } else if (property == config->rotation_property) { state->rotation = val; + } else if (property == plane->zpos_property) { + state->zpos = val; } else if (plane->funcs->atomic_set_property) { return plane->funcs->atomic_set_property(plane, state, property, val); @@ -768,6 +770,8 @@ drm_atomic_plane_get_property(struct drm_plane *plane, *val = state->src_h; } else if (property == config->rotation_property) { *val = state->rotation; + } else if (property == plane->zpos_property) { + *val = state->zpos; } else if (plane->funcs->atomic_get_property) { return plane->funcs->atomic_get_property(plane, state, property, val); } else { diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index de7fddc..0694ae1 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -32,6 +32,8 @@ #include <drm/drm_atomic_helper.h> #include <linux/fence.h> +#include "drm_crtc_internal.h" + /** * DOC: overview * @@ -592,6 +594,10 @@ drm_atomic_helper_check_planes(struct drm_device *dev, struct drm_plane_state *plane_state; int i, ret = 0; + ret = drm_atomic_helper_normalize_zpos(dev, state); + if (ret) + return ret; + for_each_plane_in_state(state, plane, plane_state, i) { const struct drm_plane_helper_funcs *funcs; diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c new file mode 100644 index 0000000..5ae6e0e --- /dev/null +++ b/drivers/gpu/drm/drm_blend.c @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2016 Samsung Electronics Co.Ltd + * Authors: + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * DRM core plane blending related functions + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ +#include <drm/drmP.h> +#include <drm/drm_atomic.h> +#include <drm/drm_crtc.h> +#include <linux/export.h> +#include <linux/slab.h> +#include <linux/sort.h> + +#include "drm_internal.h" + +/** + * drm_plane_create_zpos_property - create mutable zpos property + * @plane: drm plane + * @min: minimal possible value of zpos property + * @max: maximal possible value of zpos property + * + * This function initializes generic mutable zpos property and enables support + * for it in drm core. Drivers can then attach this property to planes to enable + * support for configurable planes arrangement during blending operation. + * Once mutable zpos property has been enabled, the DRM core will automatically + * calculate drm_plane_state->normalized_zpos values. Usually min should be set + * to 0 and max to maximal number of planes for given crtc - 1. + * + * If zpos of some planes cannot be changed (like fixed background or + * cursor/topmost planes), driver should adjust min/max values and assign those + * planes immutable zpos property with lower or higher values (for more + * information, see drm_mode_create_zpos_immutable_property() function). In such + * case driver should also assign proper initial zpos values for all planes in + * its plane_reset() callback, so the planes will be always sorted properly. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_plane_create_zpos_property(struct drm_plane *plane, + unsigned int min, unsigned int max) +{ + struct drm_property *prop; + + prop = drm_property_create_range(plane->dev, 0, "zpos", min, max); + if (!prop) + return -ENOMEM; + + drm_object_attach_property(&plane->base, prop, min); + + plane->zpos_property = prop; + return 0; +} +EXPORT_SYMBOL(drm_plane_create_zpos_property); + +/** + * drm_plane_create_zpos_immutable_property - create immuttable zpos property + * @plane: drm plane + * @min: minimal possible value of zpos property + * @max: maximal possible value of zpos property + * + * This function initializes generic immutable zpos property and enables + * support for it in drm core. Using this property driver lets userspace + * to get the arrangement of the planes for blending operation and notifies + * it that the hardware (or driver) doesn't support changing of the planes' + * order. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_plane_create_zpos_immutable_property(struct drm_plane *plane, + unsigned int min, unsigned int max) +{ + struct drm_property *prop; + + prop = drm_property_create_range(plane->dev, DRM_MODE_PROP_IMMUTABLE, + "zpos", min, max); + if (!prop) + return -ENOMEM; + + drm_object_attach_property(&plane->base, prop, min); + + plane->zpos_property = prop; + return 0; +} +EXPORT_SYMBOL(drm_plane_create_zpos_immutable_property); + +static int drm_atomic_state_zpos_cmp(const void *a, const void *b) +{ + const struct drm_plane_state *sa = *(struct drm_plane_state **)a; + const struct drm_plane_state *sb = *(struct drm_plane_state **)b; + + if (sa->zpos != sb->zpos) + return sa->zpos - sb->zpos; + else + return sa->plane->base.id - sb->plane->base.id; +} + +/** + * drm_atomic_helper_crtc_normalize_zpos - calculate normalized zpos values + * @crtc: crtc with planes, which have to be considered for normalization + * @crtc_state: new atomic state to apply + * + * This function checks new states of all planes assigned to given crtc and + * calculates normalized zpos value for them. Planes are compared first by their + * zpos values, then by plane id (if zpos equals). Plane with lowest zpos value + * is at the bottom. The plane_state->normalized_zpos is then filled with unique + * values from 0 to number of active planes in crtc minus one. + * + * RETURNS + * Zero for success or -errno + */ +int drm_atomic_helper_crtc_normalize_zpos(struct drm_crtc *crtc, + struct drm_crtc_state *crtc_state) +{ + struct drm_atomic_state *state = crtc_state->state; + struct drm_device *dev = crtc->dev; + int total_planes = dev->mode_config.num_total_plane; + struct drm_plane_state **states; + struct drm_plane *plane; + int i, n = 0; + int ret = 0; + + DRM_DEBUG_ATOMIC("[CRTC:%d:%s] calculating normalized zpos values\n", + crtc->base.id, crtc->name); + + states = kmalloc_array(total_planes, sizeof(*states), GFP_TEMPORARY); + if (!states) + return -ENOMEM; + + /* + * Normalization process might create new states for planes which + * normalized_zpos has to be recalculated. + */ + drm_for_each_plane_mask(plane, dev, crtc_state->plane_mask) { + struct drm_plane_state *plane_state = + drm_atomic_get_plane_state(state, plane); + if (IS_ERR(plane_state)) { + ret = PTR_ERR(plane_state); + goto done; + } + states[n++] = plane_state; + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] processing zpos value %d\n", + plane->base.id, plane->name, + plane_state->zpos); + } + + sort(states, n, sizeof(*states), drm_atomic_state_zpos_cmp, NULL); + + for (i = 0; i < n; i++) { + plane = states[i]->plane; + + states[i]->normalized_zpos = i; + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] normalized zpos value %d\n", + plane->base.id, plane->name, i); + } + crtc_state->zpos_changed = true; + +done: + kfree(states); + return ret; +} +EXPORT_SYMBOL(drm_atomic_helper_crtc_normalize_zpos); + +/** + * drm_atomic_helper_normalize_zpos - calculate normalized zpos values for all + * crtcs + * @dev: DRM device + * @state: atomic state of DRM device + * + * This function calculates normalized zpos value for all modified planes in + * the provided atomic state of DRM device. For more information, see + * drm_atomic_helper_crtc_normalize_zpos() function. + * + * RETURNS + * Zero for success or -errno + */ +int drm_atomic_helper_normalize_zpos(struct drm_device *dev, + struct drm_atomic_state *state) +{ + struct drm_crtc *crtc; + struct drm_crtc_state *crtc_state; + struct drm_plane *plane; + struct drm_plane_state *plane_state; + int i, ret = 0; + + for_each_plane_in_state(state, plane, plane_state, i) { + crtc = plane_state->crtc; + if (!crtc) + continue; + if (plane->state->zpos != plane_state->zpos) { + crtc_state = + drm_atomic_get_existing_crtc_state(state, crtc); + crtc_state->zpos_changed = true; + } + } + + for_each_crtc_in_state(state, crtc, crtc_state, i) { + if (crtc_state->plane_mask != crtc->state->plane_mask || + crtc_state->zpos_changed) { + ret = drm_atomic_helper_crtc_normalize_zpos(crtc, + crtc_state); + if (ret) + return ret; + } + } + return 0; +} +EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos); diff --git a/drivers/gpu/drm/drm_crtc_internal.h b/drivers/gpu/drm/drm_crtc_internal.h index 47a500b..0c34e6d 100644 --- a/drivers/gpu/drm/drm_crtc_internal.h +++ b/drivers/gpu/drm/drm_crtc_internal.h @@ -128,3 +128,7 @@ int drm_mode_atomic_ioctl(struct drm_device *dev, int drm_modeset_register_all(struct drm_device *dev); void drm_modeset_unregister_all(struct drm_device *dev); + +/* drm_blend.c */ +int drm_atomic_helper_normalize_zpos(struct drm_device *dev, + struct drm_atomic_state *state); diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index f5469d3..3936ddf 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -308,6 +308,7 @@ struct drm_plane_helper_funcs; * @mode_changed: crtc_state->mode or crtc_state->enable has been changed * @active_changed: crtc_state->active has been toggled. * @connectors_changed: connectors to this crtc have been updated + * @zpos_changed: zpos values of planes on this crtc have been updated * @color_mgmt_changed: color management properties have changed (degamma or * gamma LUT or CSC matrix) * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes @@ -344,6 +345,7 @@ struct drm_crtc_state { bool mode_changed : 1; bool active_changed : 1; bool connectors_changed : 1; + bool zpos_changed : 1; bool color_mgmt_changed : 1; /* attached planes bitmask: @@ -1396,6 +1398,9 @@ struct drm_connector { * @src_w: width of visible portion of plane (in 16.16) * @src_h: height of visible portion of plane (in 16.16) * @rotation: rotation of the plane + * @zpos: priority of the given plane on crtc (optional) + * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1 + * for given crtc * @state: backpointer to global drm_atomic_state */ struct drm_plane_state { @@ -1416,6 +1421,10 @@ struct drm_plane_state { /* Plane rotation */ unsigned int rotation; + /* Plane zpos */ + unsigned int zpos; + unsigned int normalized_zpos; + struct drm_atomic_state *state; }; @@ -1675,6 +1684,7 @@ enum drm_plane_type { * @properties: property tracking for this plane * @type: type of plane (overlay, primary, cursor) * @state: current atomic state for this plane + * @zpos_property: zpos property for this plane * @helper_private: mid-layer private data */ struct drm_plane { @@ -1716,6 +1726,8 @@ struct drm_plane { const struct drm_plane_helper_funcs *helper_private; struct drm_plane_state *state; + + struct drm_property *zpos_property; }; /** @@ -2773,6 +2785,24 @@ extern void drm_crtc_enable_color_mgmt(struct drm_crtc *crtc, uint degamma_lut_size, bool has_ctm, uint gamma_lut_size); + +int drm_plane_atomic_set_zpos_property(struct drm_plane *plane, + struct drm_plane_state *state, + struct drm_property *property, + uint64_t val); + +int drm_plane_atomic_get_zpos_property(struct drm_plane *plane, + const struct drm_plane_state *state, + struct drm_property *property, + uint64_t *val); + +int drm_plane_create_zpos_property(struct drm_plane *plane, + unsigned int min, unsigned int max); + +int drm_plane_create_zpos_immutable_property(struct drm_plane *plane, + unsigned int min, + unsigned int max); + /* Helpers */ struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type);