diff mbox

[PATCHv2,2/4] exynos_hdmi: add HPD notifier support

Message ID 1483366747-34288-3-git-send-email-hverkuil@xs4all.nl (mailing list archive)
State New, archived
Headers show

Commit Message

Hans Verkuil Jan. 2, 2017, 2:19 p.m. UTC
From: Hans Verkuil <hans.verkuil@cisco.com>

Implement the HPD notifier support to allow CEC drivers to
be informed when there is a new EDID and when a connect or
disconnect happens.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/gpu/drm/exynos/Kconfig       |  1 +
 drivers/gpu/drm/exynos/exynos_hdmi.c | 24 +++++++++++++++++++++---
 2 files changed, 22 insertions(+), 3 deletions(-)

Comments

Andrzej Hajda Jan. 3, 2017, 7:55 a.m. UTC | #1
On 02.01.2017 15:19, Hans Verkuil wrote:
> From: Hans Verkuil <hans.verkuil@cisco.com>
>
> Implement the HPD notifier support to allow CEC drivers to
> be informed when there is a new EDID and when a connect or
> disconnect happens.
>
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  drivers/gpu/drm/exynos/Kconfig       |  1 +
>  drivers/gpu/drm/exynos/exynos_hdmi.c | 24 +++++++++++++++++++++---
>  2 files changed, 22 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
> index d706ca4..80bfd1d 100644
> --- a/drivers/gpu/drm/exynos/Kconfig
> +++ b/drivers/gpu/drm/exynos/Kconfig
> @@ -77,6 +77,7 @@ config DRM_EXYNOS_DP
>  config DRM_EXYNOS_HDMI
>  	bool "HDMI"
>  	depends on DRM_EXYNOS_MIXER || DRM_EXYNOS5433_DECON
> +	select HPD_NOTIFIERS
>  	help
>  	  Choose this option if you want to use Exynos HDMI for DRM.
>  
> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
> index 5ed8b1e..28bf609 100644
> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
> @@ -31,6 +31,7 @@
>  #include <linux/pm_runtime.h>
>  #include <linux/clk.h>
>  #include <linux/gpio/consumer.h>
> +#include <linux/hpd-notifier.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/io.h>
>  #include <linux/of_address.h>
> @@ -118,6 +119,7 @@ struct hdmi_context {
>  	bool				dvi_mode;
>  	struct delayed_work		hotplug_work;
>  	struct drm_display_mode		current_mode;
> +	struct hpd_notifier		*notifier;
>  	const struct hdmi_driver_data	*drv_data;
>  
>  	void __iomem			*regs;
> @@ -807,9 +809,12 @@ static enum drm_connector_status hdmi_detect(struct drm_connector *connector,
>  {
>  	struct hdmi_context *hdata = connector_to_hdmi(connector);
>  
> -	if (gpiod_get_value(hdata->hpd_gpio))
> +	if (gpiod_get_value(hdata->hpd_gpio)) {
> +		hpd_event_connect(hdata->notifier);
>  		return connector_status_connected;
> +	}
>  
> +	hpd_event_disconnect(hdata->notifier);
>  	return connector_status_disconnected;
>  }
>  
> @@ -848,6 +853,9 @@ static int hdmi_get_modes(struct drm_connector *connector)
>  		edid->width_cm, edid->height_cm);
>  
>  	drm_mode_connector_update_edid_property(connector, edid);
> +	hpd_event_connect(hdata->notifier);

Is there a reason to call hpd_event_connect here? It was called already
from hdmi_detect.

Regards
Andrzej

> +	hpd_event_new_edid(hdata->notifier, edid,
> +			    EDID_LENGTH * (1 + edid->extensions));
>  
>  	ret = drm_add_edid_modes(connector, edid);
>  
> @@ -1483,6 +1491,7 @@ static void hdmi_disable(struct drm_encoder *encoder)
>  	if (funcs && funcs->disable)
>  		(*funcs->disable)(crtc);
>  
> +	hpd_event_disconnect(hdata->notifier);
>  	cancel_delayed_work(&hdata->hotplug_work);
>  
>  	hdmiphy_disable(hdata);
> @@ -1832,15 +1841,22 @@ static int hdmi_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	hdata->notifier = hpd_notifier_get(&pdev->dev);
> +	if (hdata->notifier == NULL) {
> +		ret = -ENOMEM;
> +		goto err_hdmiphy;
> +	}
> +
>  	pm_runtime_enable(dev);
>  
>  	ret = component_add(&pdev->dev, &hdmi_component_ops);
>  	if (ret)
> -		goto err_disable_pm_runtime;
> +		goto err_notifier_put;
>  
>  	return ret;
>  
> -err_disable_pm_runtime:
> +err_notifier_put:
> +	hpd_notifier_put(hdata->notifier);
>  	pm_runtime_disable(dev);
>  
>  err_hdmiphy:
> @@ -1859,9 +1875,11 @@ static int hdmi_remove(struct platform_device *pdev)
>  	struct hdmi_context *hdata = platform_get_drvdata(pdev);
>  
>  	cancel_delayed_work_sync(&hdata->hotplug_work);
> +	hpd_event_disconnect(hdata->notifier);
>  
>  	component_del(&pdev->dev, &hdmi_component_ops);
>  
> +	hpd_notifier_put(hdata->notifier);
>  	pm_runtime_disable(&pdev->dev);
>  
>  	if (!IS_ERR(hdata->reg_hdmi_en))
Hans Verkuil Jan. 3, 2017, 8:25 a.m. UTC | #2
On 01/03/2017 08:55 AM, Andrzej Hajda wrote:
> On 02.01.2017 15:19, Hans Verkuil wrote:
>> From: Hans Verkuil <hans.verkuil@cisco.com>
>>
>> Implement the HPD notifier support to allow CEC drivers to
>> be informed when there is a new EDID and when a connect or
>> disconnect happens.
>>
>> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
>> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> ---
>>  drivers/gpu/drm/exynos/Kconfig       |  1 +
>>  drivers/gpu/drm/exynos/exynos_hdmi.c | 24 +++++++++++++++++++++---
>>  2 files changed, 22 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
>> index d706ca4..80bfd1d 100644
>> --- a/drivers/gpu/drm/exynos/Kconfig
>> +++ b/drivers/gpu/drm/exynos/Kconfig
>> @@ -77,6 +77,7 @@ config DRM_EXYNOS_DP
>>  config DRM_EXYNOS_HDMI
>>  	bool "HDMI"
>>  	depends on DRM_EXYNOS_MIXER || DRM_EXYNOS5433_DECON
>> +	select HPD_NOTIFIERS
>>  	help
>>  	  Choose this option if you want to use Exynos HDMI for DRM.
>>  
>> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
>> index 5ed8b1e..28bf609 100644
>> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
>> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
>> @@ -31,6 +31,7 @@
>>  #include <linux/pm_runtime.h>
>>  #include <linux/clk.h>
>>  #include <linux/gpio/consumer.h>
>> +#include <linux/hpd-notifier.h>
>>  #include <linux/regulator/consumer.h>
>>  #include <linux/io.h>
>>  #include <linux/of_address.h>
>> @@ -118,6 +119,7 @@ struct hdmi_context {
>>  	bool				dvi_mode;
>>  	struct delayed_work		hotplug_work;
>>  	struct drm_display_mode		current_mode;
>> +	struct hpd_notifier		*notifier;
>>  	const struct hdmi_driver_data	*drv_data;
>>  
>>  	void __iomem			*regs;
>> @@ -807,9 +809,12 @@ static enum drm_connector_status hdmi_detect(struct drm_connector *connector,
>>  {
>>  	struct hdmi_context *hdata = connector_to_hdmi(connector);
>>  
>> -	if (gpiod_get_value(hdata->hpd_gpio))
>> +	if (gpiod_get_value(hdata->hpd_gpio)) {
>> +		hpd_event_connect(hdata->notifier);
>>  		return connector_status_connected;
>> +	}
>>  
>> +	hpd_event_disconnect(hdata->notifier);
>>  	return connector_status_disconnected;
>>  }
>>  
>> @@ -848,6 +853,9 @@ static int hdmi_get_modes(struct drm_connector *connector)
>>  		edid->width_cm, edid->height_cm);
>>  
>>  	drm_mode_connector_update_edid_property(connector, edid);
>> +	hpd_event_connect(hdata->notifier);
> 
> Is there a reason to call hpd_event_connect here? It was called already
> from hdmi_detect.

True. Will drop this.

	Hans

> 
> Regards
> Andrzej
> 
>> +	hpd_event_new_edid(hdata->notifier, edid,
>> +			    EDID_LENGTH * (1 + edid->extensions));
>>  
>>  	ret = drm_add_edid_modes(connector, edid);
>>  
>> @@ -1483,6 +1491,7 @@ static void hdmi_disable(struct drm_encoder *encoder)
>>  	if (funcs && funcs->disable)
>>  		(*funcs->disable)(crtc);
>>  
>> +	hpd_event_disconnect(hdata->notifier);
>>  	cancel_delayed_work(&hdata->hotplug_work);
>>  
>>  	hdmiphy_disable(hdata);
>> @@ -1832,15 +1841,22 @@ static int hdmi_probe(struct platform_device *pdev)
>>  		}
>>  	}
>>  
>> +	hdata->notifier = hpd_notifier_get(&pdev->dev);
>> +	if (hdata->notifier == NULL) {
>> +		ret = -ENOMEM;
>> +		goto err_hdmiphy;
>> +	}
>> +
>>  	pm_runtime_enable(dev);
>>  
>>  	ret = component_add(&pdev->dev, &hdmi_component_ops);
>>  	if (ret)
>> -		goto err_disable_pm_runtime;
>> +		goto err_notifier_put;
>>  
>>  	return ret;
>>  
>> -err_disable_pm_runtime:
>> +err_notifier_put:
>> +	hpd_notifier_put(hdata->notifier);
>>  	pm_runtime_disable(dev);
>>  
>>  err_hdmiphy:
>> @@ -1859,9 +1875,11 @@ static int hdmi_remove(struct platform_device *pdev)
>>  	struct hdmi_context *hdata = platform_get_drvdata(pdev);
>>  
>>  	cancel_delayed_work_sync(&hdata->hotplug_work);
>> +	hpd_event_disconnect(hdata->notifier);
>>  
>>  	component_del(&pdev->dev, &hdmi_component_ops);
>>  
>> +	hpd_notifier_put(hdata->notifier);
>>  	pm_runtime_disable(&pdev->dev);
>>  
>>  	if (!IS_ERR(hdata->reg_hdmi_en))
> 
>
diff mbox

Patch

diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index d706ca4..80bfd1d 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -77,6 +77,7 @@  config DRM_EXYNOS_DP
 config DRM_EXYNOS_HDMI
 	bool "HDMI"
 	depends on DRM_EXYNOS_MIXER || DRM_EXYNOS5433_DECON
+	select HPD_NOTIFIERS
 	help
 	  Choose this option if you want to use Exynos HDMI for DRM.
 
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index 5ed8b1e..28bf609 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -31,6 +31,7 @@ 
 #include <linux/pm_runtime.h>
 #include <linux/clk.h>
 #include <linux/gpio/consumer.h>
+#include <linux/hpd-notifier.h>
 #include <linux/regulator/consumer.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
@@ -118,6 +119,7 @@  struct hdmi_context {
 	bool				dvi_mode;
 	struct delayed_work		hotplug_work;
 	struct drm_display_mode		current_mode;
+	struct hpd_notifier		*notifier;
 	const struct hdmi_driver_data	*drv_data;
 
 	void __iomem			*regs;
@@ -807,9 +809,12 @@  static enum drm_connector_status hdmi_detect(struct drm_connector *connector,
 {
 	struct hdmi_context *hdata = connector_to_hdmi(connector);
 
-	if (gpiod_get_value(hdata->hpd_gpio))
+	if (gpiod_get_value(hdata->hpd_gpio)) {
+		hpd_event_connect(hdata->notifier);
 		return connector_status_connected;
+	}
 
+	hpd_event_disconnect(hdata->notifier);
 	return connector_status_disconnected;
 }
 
@@ -848,6 +853,9 @@  static int hdmi_get_modes(struct drm_connector *connector)
 		edid->width_cm, edid->height_cm);
 
 	drm_mode_connector_update_edid_property(connector, edid);
+	hpd_event_connect(hdata->notifier);
+	hpd_event_new_edid(hdata->notifier, edid,
+			    EDID_LENGTH * (1 + edid->extensions));
 
 	ret = drm_add_edid_modes(connector, edid);
 
@@ -1483,6 +1491,7 @@  static void hdmi_disable(struct drm_encoder *encoder)
 	if (funcs && funcs->disable)
 		(*funcs->disable)(crtc);
 
+	hpd_event_disconnect(hdata->notifier);
 	cancel_delayed_work(&hdata->hotplug_work);
 
 	hdmiphy_disable(hdata);
@@ -1832,15 +1841,22 @@  static int hdmi_probe(struct platform_device *pdev)
 		}
 	}
 
+	hdata->notifier = hpd_notifier_get(&pdev->dev);
+	if (hdata->notifier == NULL) {
+		ret = -ENOMEM;
+		goto err_hdmiphy;
+	}
+
 	pm_runtime_enable(dev);
 
 	ret = component_add(&pdev->dev, &hdmi_component_ops);
 	if (ret)
-		goto err_disable_pm_runtime;
+		goto err_notifier_put;
 
 	return ret;
 
-err_disable_pm_runtime:
+err_notifier_put:
+	hpd_notifier_put(hdata->notifier);
 	pm_runtime_disable(dev);
 
 err_hdmiphy:
@@ -1859,9 +1875,11 @@  static int hdmi_remove(struct platform_device *pdev)
 	struct hdmi_context *hdata = platform_get_drvdata(pdev);
 
 	cancel_delayed_work_sync(&hdata->hotplug_work);
+	hpd_event_disconnect(hdata->notifier);
 
 	component_del(&pdev->dev, &hdmi_component_ops);
 
+	hpd_notifier_put(hdata->notifier);
 	pm_runtime_disable(&pdev->dev);
 
 	if (!IS_ERR(hdata->reg_hdmi_en))