@@ -13,7 +13,6 @@ sti-drm-y := \
sti_dvo.o \
sti_awg_utils.o \
sti_vtg.o \
- sti_vtac.o \
sti_hda.o \
sti_tvout.o \
sti_hqvdp.o \
@@ -477,7 +477,6 @@ static struct platform_driver sti_platform_driver = {
static struct platform_driver * const drivers[] = {
&sti_tvout_driver,
- &sti_vtac_driver,
&sti_hqvdp_driver,
&sti_hdmi_driver,
&sti_hda_driver,
@@ -34,7 +34,6 @@ struct sti_private {
};
extern struct platform_driver sti_tvout_driver;
-extern struct platform_driver sti_vtac_driver;
extern struct platform_driver sti_hqvdp_driver;
extern struct platform_driver sti_hdmi_driver;
extern struct platform_driver sti_hda_driver;
deleted file mode 100644
@@ -1,223 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics SA 2014
- * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-
-#include <drm/drmP.h>
-
-#include "sti_drv.h"
-
-/* registers offset */
-#define VTAC_CONFIG 0x00
-#define VTAC_RX_FIFO_CONFIG 0x04
-#define VTAC_FIFO_CONFIG_VAL 0x04
-
-#define VTAC_SYS_CFG8521 0x824
-#define VTAC_SYS_CFG8522 0x828
-
-/* Number of phyts per pixel */
-#define VTAC_2_5_PPP 0x0005
-#define VTAC_3_PPP 0x0006
-#define VTAC_4_PPP 0x0008
-#define VTAC_5_PPP 0x000A
-#define VTAC_6_PPP 0x000C
-#define VTAC_13_PPP 0x001A
-#define VTAC_14_PPP 0x001C
-#define VTAC_15_PPP 0x001E
-#define VTAC_16_PPP 0x0020
-#define VTAC_17_PPP 0x0022
-#define VTAC_18_PPP 0x0024
-
-/* enable bits */
-#define VTAC_ENABLE 0x3003
-
-#define VTAC_TX_PHY_ENABLE_CLK_PHY BIT(0)
-#define VTAC_TX_PHY_ENABLE_CLK_DLL BIT(1)
-#define VTAC_TX_PHY_PLL_NOT_OSC_MODE BIT(3)
-#define VTAC_TX_PHY_RST_N_DLL_SWITCH BIT(4)
-#define VTAC_TX_PHY_PROG_N3 BIT(9)
-
-
-/**
- * VTAC mode structure
- *
- * @vid_in_width: Video Data Resolution
- * @phyts_width: Width of phyt buses(phyt low and phyt high).
- * @phyts_per_pixel: Number of phyts sent per pixel
- */
-struct sti_vtac_mode {
- u32 vid_in_width;
- u32 phyts_width;
- u32 phyts_per_pixel;
-};
-
-static const struct sti_vtac_mode vtac_mode_main = {
- .vid_in_width = 0x2,
- .phyts_width = 0x2,
- .phyts_per_pixel = VTAC_5_PPP,
-};
-static const struct sti_vtac_mode vtac_mode_aux = {
- .vid_in_width = 0x1,
- .phyts_width = 0x0,
- .phyts_per_pixel = VTAC_17_PPP,
-};
-
-/**
- * VTAC structure
- *
- * @dev: pointer to device structure
- * @regs: ioremapped registers for RX and TX devices
- * @phy_regs: phy registers for TX device
- * @clk: clock
- * @mode: main or auxillary configuration mode
- */
-struct sti_vtac {
- struct device *dev;
- void __iomem *regs;
- void __iomem *phy_regs;
- struct clk *clk;
- const struct sti_vtac_mode *mode;
-};
-
-static void sti_vtac_rx_set_config(struct sti_vtac *vtac)
-{
- u32 config;
-
- /* Enable VTAC clock */
- if (clk_prepare_enable(vtac->clk))
- DRM_ERROR("Failed to prepare/enable vtac_rx clock.\n");
-
- writel(VTAC_FIFO_CONFIG_VAL, vtac->regs + VTAC_RX_FIFO_CONFIG);
-
- config = VTAC_ENABLE;
- config |= vtac->mode->vid_in_width << 4;
- config |= vtac->mode->phyts_width << 16;
- config |= vtac->mode->phyts_per_pixel << 23;
- writel(config, vtac->regs + VTAC_CONFIG);
-}
-
-static void sti_vtac_tx_set_config(struct sti_vtac *vtac)
-{
- u32 phy_config;
- u32 config;
-
- /* Enable VTAC clock */
- if (clk_prepare_enable(vtac->clk))
- DRM_ERROR("Failed to prepare/enable vtac_tx clock.\n");
-
- /* Configure vtac phy */
- phy_config = 0x00000000;
- writel(phy_config, vtac->phy_regs + VTAC_SYS_CFG8522);
- phy_config = VTAC_TX_PHY_ENABLE_CLK_PHY;
- writel(phy_config, vtac->phy_regs + VTAC_SYS_CFG8521);
- phy_config = readl(vtac->phy_regs + VTAC_SYS_CFG8521);
- phy_config |= VTAC_TX_PHY_PROG_N3;
- writel(phy_config, vtac->phy_regs + VTAC_SYS_CFG8521);
- phy_config = readl(vtac->phy_regs + VTAC_SYS_CFG8521);
- phy_config |= VTAC_TX_PHY_ENABLE_CLK_DLL;
- writel(phy_config, vtac->phy_regs + VTAC_SYS_CFG8521);
- phy_config = readl(vtac->phy_regs + VTAC_SYS_CFG8521);
- phy_config |= VTAC_TX_PHY_RST_N_DLL_SWITCH;
- writel(phy_config, vtac->phy_regs + VTAC_SYS_CFG8521);
- phy_config = readl(vtac->phy_regs + VTAC_SYS_CFG8521);
- phy_config |= VTAC_TX_PHY_PLL_NOT_OSC_MODE;
- writel(phy_config, vtac->phy_regs + VTAC_SYS_CFG8521);
-
- /* Configure vtac tx */
- config = VTAC_ENABLE;
- config |= vtac->mode->vid_in_width << 4;
- config |= vtac->mode->phyts_width << 16;
- config |= vtac->mode->phyts_per_pixel << 23;
- writel(config, vtac->regs + VTAC_CONFIG);
-}
-
-static const struct of_device_id vtac_of_match[] = {
- {
- .compatible = "st,vtac-main",
- .data = &vtac_mode_main,
- }, {
- .compatible = "st,vtac-aux",
- .data = &vtac_mode_aux,
- }, {
- /* end node */
- }
-};
-MODULE_DEVICE_TABLE(of, vtac_of_match);
-
-static int sti_vtac_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
- const struct of_device_id *id;
- struct sti_vtac *vtac;
- struct resource *res;
-
- vtac = devm_kzalloc(dev, sizeof(*vtac), GFP_KERNEL);
- if (!vtac)
- return -ENOMEM;
-
- vtac->dev = dev;
-
- id = of_match_node(vtac_of_match, np);
- if (!id)
- return -ENOMEM;
-
- vtac->mode = id->data;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- DRM_ERROR("Invalid resource\n");
- return -ENOMEM;
- }
- vtac->regs = devm_ioremap_resource(dev, res);
- if (IS_ERR(vtac->regs))
- return PTR_ERR(vtac->regs);
-
-
- vtac->clk = devm_clk_get(dev, "vtac");
- if (IS_ERR(vtac->clk)) {
- DRM_ERROR("Cannot get vtac clock\n");
- return PTR_ERR(vtac->clk);
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (res) {
- vtac->phy_regs = devm_ioremap_nocache(dev, res->start,
- resource_size(res));
- sti_vtac_tx_set_config(vtac);
- } else {
-
- sti_vtac_rx_set_config(vtac);
- }
-
- platform_set_drvdata(pdev, vtac);
- DRM_INFO("%s %s\n", __func__, dev_name(vtac->dev));
-
- return 0;
-}
-
-static int sti_vtac_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver sti_vtac_driver = {
- .driver = {
- .name = "sti-vtac",
- .owner = THIS_MODULE,
- .of_match_table = vtac_of_match,
- },
- .probe = sti_vtac_probe,
- .remove = sti_vtac_remove,
-};
-
-MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>");
-MODULE_DESCRIPTION("STMicroelectronics SoC DRM driver");
-MODULE_LICENSE("GPL");
stih416 chip family is no more supported in Linux v4.9. It is then useless to keep sti_vtac.c file since it not used at all for the stih407/10 chip family supported by sti driver. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> --- v2: Take into account Daniel's comment => add a more explicit commit message drivers/gpu/drm/sti/Makefile | 1 - drivers/gpu/drm/sti/sti_drv.c | 1 - drivers/gpu/drm/sti/sti_drv.h | 1 - drivers/gpu/drm/sti/sti_vtac.c | 223 ----------------------------------------- 4 files changed, 226 deletions(-) delete mode 100644 drivers/gpu/drm/sti/sti_vtac.c