@@ -3776,6 +3776,15 @@ static int i915_displayport_test_data_show(struct seq_file *m, void *data)
DP_TEST_LINK_EDID_READ)
seq_printf(m, "%lx",
intel_dp->compliance.test_data.edid);
+ else if (intel_dp->compliance.test_type ==
+ DP_TEST_LINK_VIDEO_PATTERN) {
+ seq_printf(m, "hdisplay: %d\n",
+ intel_dp->compliance.test_data.hdisplay);
+ seq_printf(m, "vdisplay: %d\n",
+ intel_dp->compliance.test_data.vdisplay);
+ seq_printf(m, "bpc: %u\n",
+ intel_dp->compliance.test_data.bpc);
+ }
} else
seq_puts(m, "0");
}
@@ -13060,8 +13060,11 @@ static bool check_digital_port_conflicts(struct drm_atomic_state *state)
}
/* Dithering seems to not pass-through bits correctly when it should, so
- * only enable it on 6bpc panels. */
- pipe_config->dither = pipe_config->pipe_bpp == 6*3;
+ * only enable it on 6bpc panels and when its not a compliance
+ * test requesting 6bpc video pattern.
+ */
+ pipe_config->dither = (pipe_config->pipe_bpp == 6*3) &&
+ !pipe_config->dither_force_disable;
DRM_DEBUG_KMS("hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
@@ -28,8 +28,10 @@
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/export.h>
+#include <linux/types.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
+#include <asm/byteorder.h>
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
@@ -1593,6 +1595,13 @@ static int intel_dp_compute_bpp(struct intel_dp *intel_dp,
if (bpc > 0)
bpp = min(bpp, 3*bpc);
+ /* For DP Compliance we override the computed bpp for the pipe */
+ if (intel_dp->compliance.test_data.bpc != 0) {
+ pipe_config->pipe_bpp = 3*intel_dp->compliance.test_data.bpc;
+ pipe_config->dither_force_disable = pipe_config->pipe_bpp == 6*3;
+ DRM_DEBUG_KMS("Setting pipe_bpp to %d\n",
+ pipe_config->pipe_bpp);
+ }
return bpp;
}
@@ -3974,8 +3983,63 @@ static uint8_t intel_dp_autotest_link_training(struct intel_dp *intel_dp)
static uint8_t intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
{
- uint8_t test_result = DP_TEST_NAK;
- return test_result;
+ uint8_t test_pattern;
+ uint16_t test_misc;
+ __be16 h_width, v_height;
+ int status = 0;
+
+ /* Read the TEST_PATTERN (DP CTS 3.1.5) */
+ status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_PATTERN,
+ &test_pattern, 1);
+ if (status <= 0) {
+ DRM_DEBUG_KMS("Test pattern read failed\n");
+ return DP_TEST_NAK;
+ }
+ if (test_pattern != DP_COLOR_RAMP)
+ return DP_TEST_NAK;
+
+ status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_H_WIDTH_HI,
+ &h_width, 2);
+ if (status <= 0) {
+ DRM_DEBUG_KMS("H Width read failed\n");
+ return DP_TEST_NAK;
+ }
+
+ status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_V_HEIGHT_HI,
+ &v_height, 2);
+ if (status <= 0) {
+ DRM_DEBUG_KMS("V Height read failed\n");
+ return DP_TEST_NAK;
+ }
+
+ status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_MISC0,
+ &test_misc, 1);
+ if (status <= 0) {
+ DRM_DEBUG_KMS("TEST MISC read failed\n");
+ return DP_TEST_NAK;
+ }
+ if ((test_misc & DP_TEST_COLOR_FORMAT_MASK) != DP_COLOR_FORMAT_RGB)
+ return DP_TEST_NAK;
+ if (test_misc & DP_TEST_DYNAMIC_RANGE_CEA)
+ return DP_TEST_NAK;
+ switch (test_misc & DP_TEST_BIT_DEPTH_MASK) {
+ case DP_TEST_BIT_DEPTH_6:
+ intel_dp->compliance.test_data.bpc = 6;
+ break;
+ case DP_TEST_BIT_DEPTH_8:
+ intel_dp->compliance.test_data.bpc = 8;
+ break;
+ default:
+ return DP_TEST_NAK;
+ }
+
+ intel_dp->compliance.test_data.video_pattern = test_pattern;
+ intel_dp->compliance.test_data.hdisplay = be16_to_cpu(h_width);
+ intel_dp->compliance.test_data.vdisplay = be16_to_cpu(v_height);
+ /* Set test active flag here so userspace doesn't interrupt things */
+ intel_dp->compliance.test_active = 1;
+
+ return DP_TEST_ACK;
}
static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
@@ -47,6 +47,11 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
pipe_config->has_pch_encoder = false;
bpp = 24;
+ if (intel_dp->compliance.test_data.bpc) {
+ bpp = intel_dp->compliance.test_data.bpc * 3;
+ DRM_DEBUG_KMS("Setting pipe bpp to %d\n",
+ bpp);
+ }
/*
* for MST we always configure max link bw - the spec doesn't
* seem to suggest we should do otherwise.
@@ -55,7 +60,7 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
pipe_config->lane_count = lane_count;
- pipe_config->pipe_bpp = 24;
+ pipe_config->pipe_bpp = bpp;
pipe_config->port_clock = intel_dp_max_link_rate(intel_dp);
state = pipe_config->base.state;
@@ -578,6 +578,14 @@ struct intel_crtc_state {
*/
bool dither;
+ /*
+ * Dither gets enabled for 18bpp which causes CRC mismatch errors for
+ * compliance video pattern tests.
+ * Disable dither only if it is a compliance test request for
+ * 18bpp.
+ */
+ bool dither_force_disable;
+
/* Controls for the clock computation, to override various stages. */
bool clock_set;
@@ -888,6 +896,9 @@ struct intel_dp_desc {
struct intel_dp_compliance_data {
unsigned long edid;
+ uint8_t video_pattern;
+ uint16_t hdisplay, vdisplay;
+ uint8_t bpc;
};
struct intel_dp_compliance {
The intel_dp_autotest_video_pattern() function gets invoked through the compliance test handler on a HPD short pulse if the test type is set to DP_TEST_VIDEO_PATTERN. This performs the DPCD registers reads to read the requested test pattern, video pattern resolution, frame rate and bits per color value. The results of this analysis are handed off to userspace so that the userspace app can set the video pattern mode appropriately for the test result/response. When the test is requested with specific BPC value, we read the BPC value from the DPCD register. If this BPC value in intel_dp structure has a non-zero value and we're on a display port connector, then we use the value to calculate the bpp for the pipe. Also in this case if its a 18bpp video pattern request, then we force the dithering on pipe to be disabled since it causes CRC mismatches. The compliance_test_active flag is set at the end of the individual test handling functions. This is so that the kernel-side operations can be completed without the risk of interruption from the userspace app that is polling on that flag. v5: * Remove test_result variable * Populate the compliance test data at the end of the function (Jani Nikula) v4: *Return TEST_NAK on read failures and invalid values (Jani Nikula) * Address CRC mismatch errors v3: * Use the updated properly shifted bit definitions (Jani Nikula) * Force dithering to be disabled on 18bpp compliance test request (Manasi Navare) v2: * Updated the DPCD Register reads based on proper defines in header (Jani Nikula) * Squahsed the patch that forced the pipe bpp to compliance test bpp (Jani Nikula) Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> --- drivers/gpu/drm/i915/i915_debugfs.c | 9 +++++ drivers/gpu/drm/i915/intel_display.c | 7 ++-- drivers/gpu/drm/i915/intel_dp.c | 68 ++++++++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_dp_mst.c | 7 +++- drivers/gpu/drm/i915/intel_drv.h | 11 ++++++ 5 files changed, 97 insertions(+), 5 deletions(-)