@@ -17,7 +17,6 @@
#include "sti_vtg.h"
#define VTG_MODE_MASTER 0
-#define VTG_MODE_SLAVE_BY_EXT0 1
/* registers offset */
#define VTG_MODE 0x0000
@@ -132,7 +131,6 @@ struct sti_vtg_sync_params {
* @irq_status: store the IRQ status value
* @notifier_list: notifier callback
* @crtc: the CRTC for vblank event
- * @slave: slave vtg
* @link: List node to link the structure in lookup list
*/
struct sti_vtg {
@@ -144,7 +142,6 @@ struct sti_vtg {
u32 irq_status;
struct raw_notifier_head notifier_list;
struct drm_crtc *crtc;
- struct sti_vtg *slave;
struct list_head link;
};
@@ -166,10 +163,6 @@ struct sti_vtg *of_vtg_find(struct device_node *np)
static void vtg_reset(struct sti_vtg *vtg)
{
- /* reset slave and then master */
- if (vtg->slave)
- vtg_reset(vtg->slave);
-
writel(1, vtg->regs + VTG_DRST_AUTOC);
}
@@ -259,10 +252,6 @@ static void vtg_set_mode(struct sti_vtg *vtg,
{
unsigned int i;
- if (vtg->slave)
- vtg_set_mode(vtg->slave, VTG_MODE_SLAVE_BY_EXT0,
- vtg->sync_params, mode);
-
/* Set the number of clock cycles per line */
writel(mode->htotal, vtg->regs + VTG_CLKLN);
@@ -318,11 +307,7 @@ void sti_vtg_set_config(struct sti_vtg *vtg,
vtg_reset(vtg);
- /* enable irq for the vtg vblank synchro */
- if (vtg->slave)
- vtg_enable_irq(vtg->slave);
- else
- vtg_enable_irq(vtg);
+ vtg_enable_irq(vtg);
}
/**
@@ -365,18 +350,12 @@ u32 sti_vtg_get_pixel_number(struct drm_display_mode mode, int x)
int sti_vtg_register_client(struct sti_vtg *vtg, struct notifier_block *nb,
struct drm_crtc *crtc)
{
- if (vtg->slave)
- return sti_vtg_register_client(vtg->slave, nb, crtc);
-
vtg->crtc = crtc;
return raw_notifier_chain_register(&vtg->notifier_list, nb);
}
int sti_vtg_unregister_client(struct sti_vtg *vtg, struct notifier_block *nb)
{
- if (vtg->slave)
- return sti_vtg_unregister_client(vtg->slave, nb);
-
return raw_notifier_chain_unregister(&vtg->notifier_list, nb);
}
@@ -434,29 +413,20 @@ static int vtg_probe(struct platform_device *pdev)
return -ENOMEM;
}
- np = of_parse_phandle(pdev->dev.of_node, "st,slave", 0);
- if (np) {
- vtg->slave = of_vtg_find(np);
- of_node_put(np);
+ vtg->irq = platform_get_irq(pdev, 0);
+ if (vtg->irq < 0) {
+ DRM_ERROR("Failed to get VTG interrupt\n");
+ return vtg->irq;
+ }
- if (!vtg->slave)
- return -EPROBE_DEFER;
- } else {
- vtg->irq = platform_get_irq(pdev, 0);
- if (vtg->irq < 0) {
- DRM_ERROR("Failed to get VTG interrupt\n");
- return vtg->irq;
- }
-
- RAW_INIT_NOTIFIER_HEAD(&vtg->notifier_list);
-
- ret = devm_request_threaded_irq(dev, vtg->irq, vtg_irq,
- vtg_irq_thread, IRQF_ONESHOT,
- dev_name(dev), vtg);
- if (ret < 0) {
- DRM_ERROR("Failed to register VTG interrupt\n");
- return ret;
- }
+ RAW_INIT_NOTIFIER_HEAD(&vtg->notifier_list);
+
+ ret = devm_request_threaded_irq(dev, vtg->irq, vtg_irq,
+ vtg_irq_thread, IRQF_ONESHOT,
+ dev_name(dev), vtg);
+ if (ret < 0) {
+ DRM_ERROR("Failed to register VTG interrupt\n");
+ return ret;
}
vtg_register(vtg);
stih416 chip family is no more supported in Linux v4.9. It is then useless to keep vtg slave field since it not used at all for the stih407/10 chip family supported by sti driver. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> --- drivers/gpu/drm/sti/sti_vtg.c | 58 +++++++++++-------------------------------- 1 file changed, 14 insertions(+), 44 deletions(-)