diff mbox series

[v7,2/2] dt-bindings: Add Truly NT35597 panel driver bindings

Message ID 1537412140-5252-2-git-send-email-abhinavk@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series [v7,1/2] drm/panel: Add support for Truly NT35597 panel driver | expand

Commit Message

Abhinav Kumar Sept. 20, 2018, 2:55 a.m. UTC 
From: "abhinavk@codeaurora.org" <abhinavk@codeaurora.org>

Add the device tree bindings for Truly NT35597 panel driver.
This panel driver supports both single DSI and dual DSI.

However, this patch series supports only dual DSI.

Changes in v7:
  - Change the compatible string to indicate only the
    panel driver string and the resolution
  - Indicate reset GPIO is ACTIVE_LOW

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
---
 .../devicetree/bindings/display/truly,nt35597.txt  | 60 ++++++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/truly,nt35597.txt

Comments

Linus Walleij Sept. 21, 2018, 3:19 p.m. UTC | #1 
On Wed, Sep 19, 2018 at 7:55 PM Abhinav Kumar <abhinavk@codeaurora.org> wrote:

> From: "abhinavk@codeaurora.org" <abhinavk@codeaurora.org>
>
> Add the device tree bindings for Truly NT35597 panel driver.
> This panel driver supports both single DSI and dual DSI.
>
> However, this patch series supports only dual DSI.
>
> Changes in v7:
>   - Change the compatible string to indicate only the
>     panel driver string and the resolution
>   - Indicate reset GPIO is ACTIVE_LOW

This works for me.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/truly,nt35597.txt b/Documentation/devicetree/bindings/display/truly,nt35597.txt
new file mode 100644
index 0000000..46b29eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/truly,nt35597.txt
@@ -0,0 +1,60 @@ 
+Truly model NT35597 DSI display driver
+
+The Truly NT35597 is a generic display driver, currently only configured
+for use in the 2K display on the Qualcomm SDM845.
+
+Required properties:
+- compatible: should be "truly,nt35597-2K-display"
+- vdda-supply: phandle of the regulator that provides the supply voltage
+  Power IC supply
+- vdispp-supply: phandle of the regulator that provides the supply voltage
+  for positive LCD bias
+- vdispn-supply: phandle of the regulator that provides the supply voltage
+  for negative LCD bias
+- reset-gpios: phandle of gpio for reset line
+  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+  (active low)
+- mode-gpios: phandle of the gpio for choosing the mode of the display
+  for single DSI or Dual DSI
+  (active high)
+  This should be low for dual DSI and high for single DSI mode
+- ports: This device has two video ports driven by two DSIs. Their connections
+  are modelled using the OF graph bindings specified in
+  Documentation/devicetree/bindings/graph.txt.
+  - port@0: DSI input port driven by master DSI
+  - port@1: DSI input port driven by secondary DSI
+
+Example:
+
+	dsi@ae94000 {
+		panel@0 {
+			compatible = "truly,nt35597-2K-display";
+			reg = <0>;
+			vdda-supply = <&pm8998_l14>;
+			vdispp-supply = <&lab_regulator>;
+			vdispn-supply = <&ibb_regulator>;
+			pinctrl-names = "default", "suspend";
+			pinctrl-0 = <&dpu_dsi_active>;
+			pinctrl-1 = <&dpu_dsi_suspend>;
+
+			reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+			mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					panel0_in: endpoint {
+						remote-endpoint = <&dsi0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					panel1_in: endpoint {
+						remote-endpoint = <&dsi1_out>;
+					};
+				};
+			};
+		};
+	};