@@ -746,6 +746,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
return -EINVAL;
}
state->content_protection = val;
+ } else if (property == connector->colorspace_property) {
+ state->colorspace = val;
} else if (property == config->writeback_fb_id_property) {
struct drm_framebuffer *fb = drm_framebuffer_lookup(dev, NULL, val);
int ret = drm_atomic_set_writeback_fb_for_connector(state, fb);
@@ -814,6 +816,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
*val = state->picture_aspect_ratio;
} else if (property == config->content_type_property) {
*val = state->content_type;
+ } else if (property == connector->colorspace_property) {
+ *val = state->colorspace;
} else if (property == connector->scaling_mode_property) {
*val = state->scaling_mode;
} else if (property == connector->content_protection_property) {
@@ -826,6 +826,33 @@ int drm_display_info_set_bus_formats(struct drm_display_info *info,
};
DRM_ENUM_NAME_FN(drm_get_content_protection_name, drm_cp_enum_list)
+static const struct drm_prop_enum_list hdmi_colorspaces[] = {
+ /* For Default case, driver will set the colorspace */
+ { DRM_MODE_COLORIMETRY_DEFAULT, "Default" },
+ /* Standard Definition Colorimetry based on CEA 861 */
+ { DRM_MODE_COLORIMETRY_SMPTE_170M_YCC, "SMPTE_170M_YCC" },
+ { DRM_MODE_COLORIMETRY_BT709_YCC, "BT709_YCC" },
+ /* Standard Definition Colorimetry based on IEC 61966-2-4 */
+ { DRM_MODE_COLORIMETRY_XVYCC_601, "XVYCC_601" },
+ /* High Definition Colorimetry based on IEC 61966-2-4 */
+ { DRM_MODE_COLORIMETRY_XVYCC_709, "XVYCC_709" },
+ /* Colorimetry based on IEC 61966-2-1/Amendment 1 */
+ { DRM_MODE_COLORIMETRY_SYCC_601, "SYCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 [33] */
+ { DRM_MODE_COLORIMETRY_OPYCC_601, "opYCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 */
+ { DRM_MODE_COLORIMETRY_OPRGB, "opRGB" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { DRM_MODE_COLORIMETRY_BT2020_CYCC, "BT2020_CYCC" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { DRM_MODE_COLORIMETRY_BT2020_RGB, "BT2020_RGB" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { DRM_MODE_COLORIMETRY_BT2020_YCC, "BT2020_YCC" },
+ /* Added as part of Additional Colorimetry Extension in 861.G */
+ { DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65, "DCI-P3_RGB_D65" },
+ { DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER, "DCI-P3_RGB_Theater" },
+};
+
/**
* DOC: standard connector properties
*
@@ -1548,6 +1575,57 @@ int drm_mode_create_aspect_ratio_property(struct drm_device *dev)
EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);
/**
+ * DOC: standard connector properties
+ *
+ * Colorspace:
+ * drm_mode_create_colorspace_property - create colorspace property
+ * This property helps select a suitable colorspace based on the sink
+ * capability. Modern sink devices support wider gamut like BT2020.
+ * This helps switch to BT2020 mode if the BT2020 encoded video stream
+ * is being played by the user, same for any other colorspace. Thereby
+ * giving a good visual experience to users.
+ *
+ * The expectation from userspace is that it should parse the EDID
+ * and get supported colorspaces. Use this property and switch to the
+ * one supported. Sink supported colorspaces should be retrieved by
+ * userspace from EDID and driver will not explicitly expose them.
+ *
+ * Basically the expectation from userspace is:
+ * - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink
+ * colorspace
+ * - Set this new property to let the sink know what it
+ * converted the CRTC output to.
+ * - This property is just to inform sink what colorspace
+ * source is trying to drive.
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ */
+int drm_mode_create_colorspace_property(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_property *prop;
+
+ if (connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
+ connector->connector_type == DRM_MODE_CONNECTOR_HDMIB) {
+ prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM,
+ "Colorspace",
+ hdmi_colorspaces,
+ ARRAY_SIZE(hdmi_colorspaces));
+ if (!prop)
+ return -ENOMEM;
+ } else {
+ DRM_DEBUG_KMS("Colorspace property not supported\n");
+ return 0;
+ }
+
+ connector->colorspace_property = prop;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_colorspace_property);
+
+/**
* drm_mode_create_content_type_property - create content type property
* @dev: DRM device
*
@@ -253,6 +253,34 @@ enum drm_panel_orientation {
DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
};
+/*
+ * This is a consolidated colorimetry list supported by HDMI and
+ * DP protocol standard. The respective connectors will register
+ * a property with the subset of this list (supported by that
+ * respective protocol). Userspace will set the colorspace through
+ * a colorspace property which will be created and exposed to
+ * userspace.
+ */
+
+/* For Default case, driver will set the colorspace */
+#define DRM_MODE_COLORIMETRY_DEFAULT 0
+/* CEA 861 Normal Colorimetry options */
+#define DRM_MODE_COLORIMETRY_NO_DATA 0
+#define DRM_MODE_COLORIMETRY_SMPTE_170M_YCC 1
+#define DRM_MODE_COLORIMETRY_BT709_YCC 2
+/* CEA 861 Extended Colorimetry Options */
+#define DRM_MODE_COLORIMETRY_XVYCC_601 3
+#define DRM_MODE_COLORIMETRY_XVYCC_709 4
+#define DRM_MODE_COLORIMETRY_SYCC_601 5
+#define DRM_MODE_COLORIMETRY_OPYCC_601 6
+#define DRM_MODE_COLORIMETRY_OPRGB 7
+#define DRM_MODE_COLORIMETRY_BT2020_CYCC 8
+#define DRM_MODE_COLORIMETRY_BT2020_RGB 9
+#define DRM_MODE_COLORIMETRY_BT2020_YCC 10
+/* Additional Colorimetry extension added as part of CTA 861.G */
+#define DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65 11
+#define DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER 12
+
/**
* struct drm_display_info - runtime data about the connected sink
*
@@ -503,6 +531,13 @@ struct drm_connector_state {
unsigned int content_protection;
/**
+ * @colorspace: State variable for Connector property to request
+ * colorspace change on Sink. This is most commonly used to switch
+ * to wider color gamuts like BT2020.
+ */
+ u32 colorspace;
+
+ /**
* @writeback_job: Writeback job for writeback connectors
*
* Holds the framebuffer and out-fence for a writeback connector. As
@@ -995,6 +1030,12 @@ struct drm_connector {
struct drm_property *content_protection_property;
/**
+ * @colorspace_property: Connector property to set the suitable
+ * colorspace supported by the sink.
+ */
+ struct drm_property *colorspace_property;
+
+ /**
* @path_blob_ptr:
*
* DRM blob property data for the DP MST path property. This should only
@@ -1269,6 +1310,7 @@ int drm_connector_attach_vrr_capable_property(
int drm_connector_attach_content_protection_property(
struct drm_connector *connector);
int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
+int drm_mode_create_colorspace_property(struct drm_connector *connector);
int drm_mode_create_content_type_property(struct drm_device *dev);
void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame,
const struct drm_connector_state *conn_state);