| Message ID | 1583920112-2680-2-git-send-email-simhavcs@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] dt-binding: Add DSI/LVDS tc358775 bridge bindings | expand |
On 11.03.2020 10:48, Vinay Simha BN wrote: > dsi2lvds tc358775 bridge driver added > Tested in apq8016, ifc6309 board and panel > auo,b101xtn01 > > Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> > --- > v1: > Initial version > > v2: > * Andrzej Hajda review comments incorporated > SPDX identifier > development debug removed > alphabetic order headers > u32 instead of unit32_t > magic numbers to macros for CLRSI and mux registers > ignored return value > > * Laurent Pinchart review comments incorporated > mdelay to usleep_range > bus_formats added > --- > drivers/gpu/drm/bridge/Kconfig | 10 + > drivers/gpu/drm/bridge/Makefile | 1 + > drivers/gpu/drm/bridge/tc358775.c | 688 ++++++++++++++++++++++++++++++++++++++ > 3 files changed, 699 insertions(+) > create mode 100644 drivers/gpu/drm/bridge/tc358775.c > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > index 8397bf7..d5528fa 100644 > --- a/drivers/gpu/drm/bridge/Kconfig > +++ b/drivers/gpu/drm/bridge/Kconfig > @@ -133,6 +133,16 @@ config DRM_TOSHIBA_TC358767 > ---help--- > Toshiba TC358767 eDP bridge chip driver. > > +config DRM_TOSHIBA_TC358775 > + tristate "Toshiba TC358775 LVDS bridge" > + depends on OF > + select DRM_KMS_HELPER > + select REGMAP_I2C > + select DRM_PANEL > + select DRM_MIPI_DSI > + ---help--- > + Toshiba TC358775 LVDS bridge chip driver. > + > config DRM_TI_TFP410 > tristate "TI TFP410 DVI/HDMI bridge" > depends on OF > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > index 1eb5376..9b2c512 100644 > --- a/drivers/gpu/drm/bridge/Makefile > +++ b/drivers/gpu/drm/bridge/Makefile > @@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_SII9234) += sii9234.o > obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o > obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o > obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o > +obj-$(CONFIG_DRM_TOSHIBA_TC358775) += tc358775.o > obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/ > obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o > obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o > diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c > new file mode 100644 > index 0000000..28b828e > --- /dev/null > +++ b/drivers/gpu/drm/bridge/tc358775.c > @@ -0,0 +1,688 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * tc358775 DSI to LVDS bridge driver > + * > + * Copyright (C) 2020 InforceComputing > + * Author: Vinay Simha BN <vinaysimha@inforcecomputing.com> > + * > + */ > +#define DEBUG > +#include <linux/clk.h> > +#include <linux/device.h> > +#include <linux/gpio/consumer.h> > +#include <linux/i2c.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/regmap.h> > +#include <linux/regulator/consumer.h> > +#include <linux/slab.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_bridge.h> > +#include <drm/drm_crtc_helper.h> > +#include <drm/drm_dp_helper.h> > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_of.h> > +#include <drm/drm_panel.h> > +#include <drm/drm_probe_helper.h> > + > +#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end)) > +#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end)) > + > +/* Registers */ > + > +/* DSI D-PHY Layer Registers */ > +#define D0W_DPHYCONTTX 0x0004 /* Data Lane 0 DPHY Tx Control */ > +#define CLW_DPHYCONTRX 0x0020 /* Clock Lane DPHY Rx Control */ > +#define D0W_DPHYCONTRX 0x0024 /* Data Lane 0 DPHY Rx Control */ > +#define D1W_DPHYCONTRX 0x0028 /* Data Lane 1 DPHY Rx Control */ > +#define D2W_DPHYCONTRX 0x002C /* Data Lane 2 DPHY Rx Control */ > +#define D3W_DPHYCONTRX 0x0030 /* Data Lane 3 DPHY Rx Control */ > +#define COM_DPHYCONTRX 0x0038 /* DPHY Rx Common Control */ > +#define CLW_CNTRL 0x0040 /* Clock Lane Control */ > +#define D0W_CNTRL 0x0044 /* Data Lane 0 Control */ > +#define D1W_CNTRL 0x0048 /* Data Lane 1 Control */ > +#define D2W_CNTRL 0x004C /* Data Lane 2 Control */ > +#define D3W_CNTRL 0x0050 /* Data Lane 3 Control */ > +#define DFTMODE_CNTRL 0x0054 /* DFT Mode Control */ > + > +/* DSI PPI Layer Registers */ > +#define PPI_STARTPPI 0x0104 /* START control bit of PPI-TX function. */ > +#define PPI_BUSYPPI 0x0108 > +#define PPI_LINEINITCNT 0x0110 /* Line Initialization Wait Counter */ > +#define PPI_LPTXTIMECNT 0x0114 > +#define PPI_LANEENABLE 0x0134 /* Enables each lane at the PPI layer. */ > +#define PPI_TX_RX_TA 0x013C /* DSI Bus Turn Around timing parameters */ > + > +/* Analog timer function enable */ > +#define PPI_CLS_ATMR 0x0140 /* Delay for Clock Lane in LPRX */ > +#define PPI_D0S_ATMR 0x0144 /* Delay for Data Lane 0 in LPRX */ > +#define PPI_D1S_ATMR 0x0148 /* Delay for Data Lane 1 in LPRX */ > +#define PPI_D2S_ATMR 0x014C /* Delay for Data Lane 2 in LPRX */ > +#define PPI_D3S_ATMR 0x0150 /* Delay for Data Lane 3 in LPRX */ > + > +#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* For lane 0 */ > +#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* For lane 1 */ > +#define PPI_D2S_CLRSIPOCOUNT 0x016C /* For lane 2 */ > +#define PPI_D3S_CLRSIPOCOUNT 0x0170 /* For lane 3 */ > + > +#define CLS_PRE 0x0180 /* Digital Counter inside of PHY IO */ > +#define D0S_PRE 0x0184 /* Digital Counter inside of PHY IO */ > +#define D1S_PRE 0x0188 /* Digital Counter inside of PHY IO */ > +#define D2S_PRE 0x018C /* Digital Counter inside of PHY IO */ > +#define D3S_PRE 0x0190 /* Digital Counter inside of PHY IO */ > +#define CLS_PREP 0x01A0 /* Digital Counter inside of PHY IO */ > +#define D0S_PREP 0x01A4 /* Digital Counter inside of PHY IO */ > +#define D1S_PREP 0x01A8 /* Digital Counter inside of PHY IO */ > +#define D2S_PREP 0x01AC /* Digital Counter inside of PHY IO */ > +#define D3S_PREP 0x01B0 /* Digital Counter inside of PHY IO */ > +#define CLS_ZERO 0x01C0 /* Digital Counter inside of PHY IO */ > +#define D0S_ZERO 0x01C4 /* Digital Counter inside of PHY IO */ > +#define D1S_ZERO 0x01C8 /* Digital Counter inside of PHY IO */ > +#define D2S_ZERO 0x01CC /* Digital Counter inside of PHY IO */ > +#define D3S_ZERO 0x01D0 /* Digital Counter inside of PHY IO */ > + > +#define PPI_CLRFLG 0x01E0 /* PRE Counters has reached set values */ > +#define PPI_CLRSIPO 0x01E4 /* Clear SIPO values, Slave mode use only. */ > +#define HSTIMEOUT 0x01F0 /* HS Rx Time Out Counter */ > +#define HSTIMEOUTENABLE 0x01F4 /* Enable HS Rx Time Out Counter */ > +#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX function */ > +#define DSI_BUSYDSI 0x0208 > +#define DSI_LANEENABLE 0x0210 /* Enables each lane at the Protocol layer. */ > +#define DSI_LANESTATUS0 0x0214 /* Displays lane is in HS RX mode. */ > +#define DSI_LANESTATUS1 0x0218 /* Displays lane is in ULPS or STOP state */ > + > +#define DSI_INTSTATUS 0x0220 /* Interrupt Status */ > +#define DSI_INTMASK 0x0224 /* Interrupt Mask */ > +#define DSI_INTCLR 0x0228 /* Interrupt Clear */ > +#define DSI_LPTXTO 0x0230 /* Low Power Tx Time Out Counter */ > + > +#define DSIERRCNT 0x0300 /* DSI Error Count */ > +#define APLCTRL 0x0400 /* Application Layer Control */ > +#define RDPKTLN 0x0404 /* Command Read Packet Length */ > + > +#define VPCTRL 0x0450 /* Video Path Control */ > +#define HTIM1 0x0454 /* Horizontal Timing Control 1 */ > +#define HTIM2 0x0458 /* Horizontal Timing Control 2 */ > +#define VTIM1 0x045C /* Vertical Timing Control 1 */ > +#define VTIM2 0x0460 /* Vertical Timing Control 2 */ > +#define VFUEN 0x0464 /* Video Frame Timing Update Enable */ > + > +/* Mux Input Select for LVDS LINK Input */ > +#define LV_MX0003 0x0480 /* Bit 0 to 3 */ > +#define LV_MX0407 0x0484 /* Bit 4 to 7 */ > +#define LV_MX0811 0x0488 /* Bit 8 to 11 */ > +#define LV_MX1215 0x048C /* Bit 12 to 15 */ > +#define LV_MX1619 0x0490 /* Bit 16 to 19 */ > +#define LV_MX2023 0x0494 /* Bit 20 to 23 */ > +#define LV_MX2427 0x0498 /* Bit 24 to 27 */ > +#define LV_MX(b0, b1, b2, b3) (FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | \ > + FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24)) > + > +/* Input bit numbers used in mux registers */ > +enum { > + LVI_R0, > + LVI_R1, > + LVI_R2, > + LVI_R3, > + LVI_R4, > + LVI_R5, > + LVI_R6, > + LVI_R7, > + LVI_G0, > + LVI_G1, > + LVI_G2, > + LVI_G3, > + LVI_G4, > + LVI_G5, > + LVI_G6, > + LVI_G7, > + LVI_B0, > + LVI_B1, > + LVI_B2, > + LVI_B3, > + LVI_B4, > + LVI_B5, > + LVI_B6, > + LVI_B7, > + LVI_HS, > + LVI_VS, > + LVI_DE, > + LVI_L0 > +}; > + > +#define LVCFG 0x049C /* LVDS Configuration */ > +#define LVPHY0 0x04A0 /* LVDS PHY 0 */ > +#define LVPHY1 0x04A4 /* LVDS PHY 1 */ > +#define SYSSTAT 0x0500 /* System Status */ > +#define SYSRST 0x0504 /* System Reset */ > +/* GPIO Registers */ > +#define GPIOC 0x0520 /* GPIO Control */ > +#define GPIOO 0x0524 /* GPIO Output */ > +#define GPIOI 0x0528 /* GPIO Input */ > + > +/* I2C Registers */ > +#define I2CTIMCTRL 0x0540 /* I2C IF Timing and Enable Control */ > +#define I2CMADDR 0x0544 /* I2C Master Addressing */ > +#define WDATAQ 0x0548 /* Write Data Queue */ > +#define RDATAQ 0x054C /* Read Data Queue */ > + > +/* Chip ID and Revision ID Register */ > +#define IDREG 0x0580 > + > +#define LPX_PERIOD 4 > +#define TTA_GET 0x40000 > +#define TTA_SURE 6 > + > +#define TC358775XBG_ID 0x00007500 > + > +/* Debug Registers */ > +#define DEBUG00 0x05A0 /* Debug */ > +#define DEBUG01 0x05A4 /* LVDS Data */ > + > +#define DSI_CLEN_BIT BIT(0) > +#define DIVIDE_BY_3 3 /* PCLK=DCLK/3 */ > +#define LVCFG_LVEN_BIT BIT(0) > + > +#define L0EN BIT(1) > + > + > +#define TC358775_VPCTRL_VSDELAY__MASK 0x3FF00000 > +#define TC358775_VPCTRL_VSDELAY__SHIFT 20 > +static inline u32 TC358775_VPCTRL_VSDELAY(uint32_t val) > +{ > + return ((val) << TC358775_VPCTRL_VSDELAY__SHIFT) & > + TC358775_VPCTRL_VSDELAY__MASK; > +} > + > +#define TC358775_VPCTRL_OPXLFMT__MASK 0x00000100 > +#define TC358775_VPCTRL_OPXLFMT__SHIFT 8 > +static inline u32 TC358775_VPCTRL_OPXLFMT(uint32_t val) > +{ > + return ((val) << TC358775_VPCTRL_OPXLFMT__SHIFT) & > + TC358775_VPCTRL_OPXLFMT__MASK; > +} > + > +#define TC358775_VPCTRL_MSF__MASK 0x00000001 > +#define TC358775_VPCTRL_MSF__SHIFT 0 > +static inline u32 TC358775_VPCTRL_MSF(uint32_t val) > +{ > + return ((val) << TC358775_VPCTRL_MSF__SHIFT) & > + TC358775_VPCTRL_MSF__MASK; > +} > + > +#define TC358775_LVCFG_PCLKDIV__MASK 0x000000f0 > +#define TC358775_LVCFG_PCLKDIV__SHIFT 4 > +static inline u32 TC358775_LVCFG_PCLKDIV(uint32_t val) > +{ > + return ((val) << TC358775_LVCFG_PCLKDIV__SHIFT) & > + TC358775_LVCFG_PCLKDIV__MASK; > +} > + > +#define TC358775_LVCFG_LVDLINK__MASK 0x00000002 > +#define TC358775_LVCFG_LVDLINK__SHIFT 0 > +static inline u32 TC358775_LVCFG_LVDLINK(uint32_t val) > +{ > + return ((val) << TC358775_LVCFG_LVDLINK__SHIFT) & > + TC358775_LVCFG_LVDLINK__MASK; > +} > + > +static const char * const regulator_names[] = { > + "vdd", > + "vddio" > +}; > + > +struct tc_data { > + struct i2c_client *i2c; > + > + struct device *dev; > + struct regmap *regmap; > + > + struct drm_bridge bridge; > + struct drm_connector connector; > + struct drm_panel *panel; > + > + enum drm_connector_status status; As I commented this field is unused, writing to it once, does not make it 'used'. > + struct device_node *host_node; > + struct mipi_dsi_device *dsi; > + u8 num_dsi_lanes; > + > + struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)]; > + struct gpio_desc *reset_gpio; > + struct gpio_desc *stby_gpio; > + u32 rev; This field is also not needed, you can use local variable instead. > + u8 dual_link; /* single-link or dual-link */ > +}; > + > +static inline struct tc_data *bridge_to_tc(struct drm_bridge *b) > +{ > + return container_of(b, struct tc_data, bridge); > +} > + > +static inline struct tc_data *connector_to_tc(struct drm_connector *c) > +{ > + return container_of(c, struct tc_data, connector); > +} > + > +static void tc_bridge_pre_enable(struct drm_bridge *bridge) > +{ > + struct tc_data *tc = bridge_to_tc(bridge); > + struct device *dev = &tc->dsi->dev; > + int ret; > + > + ret = regulator_bulk_enable(ARRAY_SIZE(tc->supplies), tc->supplies); Specs says regulator enabling should be ordered with proper delays. > + if (ret < 0) { > + dev_err(dev, "regulator enable failed, %d\n", ret); > + return; > + } > + usleep_range(10000, 20000); > + > + gpiod_set_value(tc->stby_gpio, 0); > + usleep_range(10, 20); > + > + gpiod_set_value(tc->reset_gpio, 0); > + usleep_range(10000, 20000); > + > + drm_panel_prepare(tc->panel); > +} > + > +static void tc_bridge_disable(struct drm_bridge *bridge) > +{ > + struct tc_data *tc = bridge_to_tc(bridge); > + struct device *dev = &tc->dsi->dev; > + int ret; > + > + ret = regulator_bulk_disable(ARRAY_SIZE(tc->supplies), tc->supplies); Disabling regulators here does not make sense, and is against specs you pointed in earlier email, see chapter 8.4.5. In bridge disable you should only stop data transmission, power-off sequence should be moved to post-disable and reordered according to docs. > + if (ret < 0) > + dev_err(dev, "regulator disable failed, %d\n", ret); > + usleep_range(30000, 40000); > + > + drm_panel_disable(tc->panel); > +} > + > +static void tc_bridge_post_disable(struct drm_bridge *bridge) > +{ > + struct tc_data *tc = bridge_to_tc(bridge); > + > + gpiod_set_value(tc->stby_gpio, 1); > + usleep_range(10, 20); > + > + gpiod_set_value(tc->reset_gpio, 1); > + usleep_range(10000, 20000); > + > + drm_panel_unprepare(tc->panel); > +} > + > +static int d2l_write(struct tc_data *tc, u16 reg, u32 data) > +{ > + int ret = 0; > + > + ret = regmap_bulk_write(tc->regmap, reg, (u32[]) {data}, 1); > + > + return ret; > +} > + > +static void tc_bridge_enable(struct drm_bridge *bridge) > +{ > + struct tc_data *tc = bridge_to_tc(bridge); > + int ret; > + u32 hbpr, hpw, htime1, hfpr, hsize, htime2; > + u32 vbpr, vpw, vtime1, vfpr, vsize, vtime2; > + u32 val = 0; > + u16 bus_formats; > + struct drm_display_mode *mode; > + > + mode = &bridge->encoder->crtc->state->adjusted_mode; > + > + hbpr = 0; > + hpw = mode->hsync_end - mode->hsync_start; > + vbpr = 0; > + vpw = mode->vsync_end - mode->vsync_start; > + > + htime1 = (hbpr << 16) + hpw; > + vtime1 = (vbpr << 16) + vpw; > + > + hfpr = mode->hsync_start - mode->hdisplay; > + hsize = mode->hdisplay; > + vfpr = mode->vsync_start - mode->vdisplay; > + vsize = mode->vdisplay; > + > + htime2 = (hfpr << 16) + hsize; > + vtime2 = (vfpr << 16) + vsize; > + > + ret = regmap_read(tc->regmap, IDREG, &tc->rev); > + if (ret) { > + dev_err(tc->dev, "can not read device ID: %d\n", ret); > + return; > + } > + dev_info(tc->dev, "DSI2LVDS Chip ID.%02x Revision ID. %02x\n", > + (tc->rev>>8)&0xFF, (tc->rev)&0xFF); > + > + d2l_write(tc, SYSRST, 0x000000FF); > + usleep_range(30000, 40000); > + > + d2l_write(tc, PPI_TX_RX_TA, TTA_GET | TTA_SURE); > + d2l_write(tc, PPI_LPTXTIMECNT, LPX_PERIOD); > + d2l_write(tc, PPI_D0S_CLRSIPOCOUNT, 3); > + d2l_write(tc, PPI_D1S_CLRSIPOCOUNT, 3); > + d2l_write(tc, PPI_D2S_CLRSIPOCOUNT, 3); > + d2l_write(tc, PPI_D3S_CLRSIPOCOUNT, 3); > + > + val = ((L0EN << tc->num_dsi_lanes) - L0EN) | DSI_CLEN_BIT; > + d2l_write(tc, PPI_LANEENABLE, val); > + d2l_write(tc, DSI_LANEENABLE, val); > + > + d2l_write(tc, PPI_STARTPPI, 0x00000001); > + d2l_write(tc, DSI_STARTDSI, 0x00000001); > + > + val = TC358775_VPCTRL_VSDELAY(21); //TODO : to set the dynamic value > + > + bus_formats = tc->connector.display_info.bus_formats[0]; > + > + if (bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG > + || bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA) { > + /* RGB888 */ > + val |= TC358775_VPCTRL_OPXLFMT(1); > + d2l_write(tc, VPCTRL, val); > + } else { > + /* RGB666 */ > + val |= TC358775_VPCTRL_MSF(1); > + d2l_write(tc, VPCTRL, val); > + } > + > + d2l_write(tc, HTIM1, htime1); > + d2l_write(tc, VTIM1, vtime1); > + d2l_write(tc, HTIM2, htime2); > + d2l_write(tc, VTIM2, vtime2); > + > + d2l_write(tc, VFUEN, 0x00000001); > + d2l_write(tc, SYSRST, 0x00000004); > + d2l_write(tc, LVPHY0, 0x00040006); > + > + /* default jeida-24 */ > + if (bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG) { > + /* vesa-24, TODO jeida-18*/ > + d2l_write(tc, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3)); > + d2l_write(tc, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5, LVI_G0)); > + d2l_write(tc, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_G6, LVI_G7)); > + d2l_write(tc, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0)); > + d2l_write(tc, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2)); > + d2l_write(tc, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0)); > + d2l_write(tc, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6)); > + } > + > + d2l_write(tc, VFUEN, 0x00000001); > + > + val = TC358775_LVCFG_PCLKDIV(DIVIDE_BY_3) | LVCFG_LVEN_BIT; > + if (tc->dual_link) > + val |= TC358775_LVCFG_LVDLINK(1); > + > + d2l_write(tc, LVCFG, val); > + > + drm_panel_enable(tc->panel); > +} > + > +static int tc_connector_get_modes(struct drm_connector *connector) > +{ > + struct tc_data *tc = connector_to_tc(connector); > + struct edid *edid; > + unsigned int count; > + > + if (tc->panel && tc->panel->funcs && tc->panel->funcs->get_modes) { > + count = tc->panel->funcs->get_modes(tc->panel, connector); > + if (count > 0) > + return count; > + } > + > + edid = drm_get_edid(connector, tc->i2c->adapter); > + if (!edid) > + return 0; > + > + drm_connector_update_edid_property(connector, edid); > + count = drm_add_edid_modes(connector, edid); > + kfree(edid); > + > + return count; > +} > + > +static int tc_connector_mode_valid(struct drm_connector *connector, > + struct drm_display_mode *mode) > +{ > + struct tc_data *tc = connector_to_tc(connector); > + > + /* Maximum pixel clock speed 135MHz-single-link/270MHz-dual-link */ > + if ((mode->clock > 135000 && tc->dual_link == 0) || > + (mode->clock > 270000 && tc->dual_link == 1)) > + return MODE_CLOCK_HIGH; > + > + return MODE_OK; > +} As Laurent pointed out earlier this should be bridge.mode_valid. Regards Andrzej > + > +static struct drm_encoder * > +tc_connector_best_encoder(struct drm_connector *connector) > +{ > + struct tc_data *tc = connector_to_tc(connector); > + > + return tc->bridge.encoder; > +} > + > +static const struct drm_connector_helper_funcs tc_connector_helper_funcs = { > + .get_modes = tc_connector_get_modes, > + .mode_valid = tc_connector_mode_valid, > + .best_encoder = tc_connector_best_encoder, > +}; > + > +static const struct drm_connector_funcs tc_connector_funcs = { > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = drm_connector_cleanup, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +int tc358775_parse_dt(struct device_node *np, struct tc_data *tc) > +{ > + u32 num_lanes; > + u8 dual_link; > + > + of_property_read_u8(np, "tc,dual-link", &dual_link); > + of_property_read_u32(np, "tc,dsi-lanes", &num_lanes); > + > + if (num_lanes < 1 || num_lanes > 4) > + return -EINVAL; > + > + tc->num_dsi_lanes = num_lanes; > + tc->dual_link = dual_link; > + > + tc->host_node = of_graph_get_remote_node(np, 0, 0); > + if (!tc->host_node) > + return -ENODEV; > + > + of_node_put(tc->host_node); > + > + return 0; > +} > + > +int tc358775_attach_dsi(struct tc_data *tc) > +{ > + struct device *dev = &tc->i2c->dev; > + struct mipi_dsi_host *host; > + struct mipi_dsi_device *dsi; > + int ret = 0; > + const struct mipi_dsi_device_info info = { .type = "tc358775", > + .channel = 0, > + .node = NULL, > + }; > + > + host = of_find_mipi_dsi_host_by_node(tc->host_node); > + if (!host) { > + dev_err(dev, "failed to find dsi host\n"); > + return -EPROBE_DEFER; > + } > + > + dsi = mipi_dsi_device_register_full(host, &info); > + if (IS_ERR(dsi)) { > + dev_err(dev, "failed to create dsi device\n"); > + ret = PTR_ERR(dsi); > + goto err_dsi_device; > + } > + > + tc->dsi = dsi; > + > + dsi->lanes = tc->num_dsi_lanes; > + dsi->format = MIPI_DSI_FMT_RGB888; > + dsi->mode_flags = MIPI_DSI_MODE_VIDEO; > + > + ret = mipi_dsi_attach(dsi); > + if (ret < 0) { > + dev_err(dev, "failed to attach dsi to host\n"); > + goto err_dsi_attach; > + } > + > + return 0; > + > +err_dsi_attach: > + mipi_dsi_device_unregister(dsi); > +err_dsi_device: > + return ret; > +} > + > +static int tc_bridge_attach(struct drm_bridge *bridge) > +{ > + struct tc_data *tc = bridge_to_tc(bridge); > + struct drm_device *drm = bridge->dev; > + int ret; > + > + /* Create LVDS connector */ > + drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs); > + ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs, > + DRM_MODE_CONNECTOR_LVDS); > + if (ret) > + return ret; > + > + if (tc->panel) > + drm_panel_attach(tc->panel, &tc->connector); > + > + drm_connector_attach_encoder(&tc->connector, tc->bridge.encoder); > + > + ret = tc358775_attach_dsi(tc); > + > + return ret; > +} > + > +static const struct drm_bridge_funcs tc_bridge_funcs = { > + .attach = tc_bridge_attach, > + .pre_enable = tc_bridge_pre_enable, > + .enable = tc_bridge_enable, > + .disable = tc_bridge_disable, > + .post_disable = tc_bridge_post_disable, > +}; > + > +static const struct regmap_config tc_regmap_config = { > + .name = "tc358775", > + .reg_bits = 16, > + .val_bits = 32, > + .reg_stride = 4, > + .max_register = 0x05A8, > + .cache_type = REGCACHE_RBTREE, > + .reg_format_endian = REGMAP_ENDIAN_BIG, > + .val_format_endian = REGMAP_ENDIAN_LITTLE, > +}; > + > +static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) > +{ > + struct device *dev = &client->dev; > + struct tc_data *tc; > + int ret; > + unsigned int i; > + > + tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL); > + if (!tc) > + return -ENOMEM; > + > + tc->dev = dev; > + tc->i2c = client; > + tc->status = connector_status_connected; > + > + /* port@1 is the output port */ > + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &tc->panel, NULL); > + if (ret && ret != -ENODEV) > + return ret; > + > + ret = tc358775_parse_dt(dev->of_node, tc); > + if (ret) > + return ret; > + > + for (i = 0; i < ARRAY_SIZE(tc->supplies); i++) > + tc->supplies[i].supply = regulator_names[i]; > + > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(tc->supplies), > + tc->supplies); > + if (ret < 0) > + dev_err(dev, "failed to init regulator, ret=%d\n", ret); > + > + tc->stby_gpio = devm_gpiod_get(dev, "stby", GPIOD_OUT_HIGH); > + if (IS_ERR(tc->stby_gpio)) { > + ret = PTR_ERR(tc->stby_gpio); > + dev_err(dev, "cannot get stby-gpio %d\n", ret); > + return ret; > + } > + > + tc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(tc->reset_gpio)) { > + ret = PTR_ERR(tc->reset_gpio); > + dev_err(dev, "cannot get reset-gpios %d\n", ret); > + return ret; > + } > + > + tc->regmap = devm_regmap_init_i2c(client, &tc_regmap_config); > + if (IS_ERR(tc->regmap)) { > + ret = PTR_ERR(tc->regmap); > + dev_err(dev, "Failed to initialize regmap: %d\n", ret); > + return ret; > + } > + > + tc->bridge.funcs = &tc_bridge_funcs; > + tc->bridge.of_node = dev->of_node; > + drm_bridge_add(&tc->bridge); > + > + i2c_set_clientdata(client, tc); > + > + return 0; > +} > + > +static int tc_remove(struct i2c_client *client) > +{ > + struct tc_data *tc = i2c_get_clientdata(client); > + > + drm_bridge_remove(&tc->bridge); > + > + return 0; > +} > + > +static const struct i2c_device_id tc358775_i2c_ids[] = { > + { "tc358775", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, tc358775_i2c_ids); > + > +static const struct of_device_id tc358775_of_ids[] = { > + { .compatible = "toshiba,tc358775", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, tc358775_of_ids); > + > +static struct i2c_driver tc358775_driver = { > + .driver = { > + .name = "tc358775", > + .of_match_table = tc358775_of_ids, > + }, > + .id_table = tc358775_i2c_ids, > + .probe = tc_probe, > + .remove = tc_remove, > +}; > +module_i2c_driver(tc358775_driver); > + > +MODULE_AUTHOR("Vinay Simha BN <vinaysimha@inforcecomputing.com>"); > +MODULE_DESCRIPTION("tc358775 LVDS encoder driver"); Please fix the description, for example: TC... DSI/LVDS bridge driver Regards Andrzej > +MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 8397bf7..d5528fa 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -133,6 +133,16 @@ config DRM_TOSHIBA_TC358767 ---help--- Toshiba TC358767 eDP bridge chip driver. +config DRM_TOSHIBA_TC358775 + tristate "Toshiba TC358775 LVDS bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + select DRM_PANEL + select DRM_MIPI_DSI + ---help--- + Toshiba TC358775 LVDS bridge chip driver. + config DRM_TI_TFP410 tristate "TI TFP410 DVI/HDMI bridge" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index 1eb5376..9b2c512 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_SII9234) += sii9234.o obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o +obj-$(CONFIG_DRM_TOSHIBA_TC358775) += tc358775.o obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/ obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c new file mode 100644 index 0000000..28b828e --- /dev/null +++ b/drivers/gpu/drm/bridge/tc358775.c @@ -0,0 +1,688 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * tc358775 DSI to LVDS bridge driver + * + * Copyright (C) 2020 InforceComputing + * Author: Vinay Simha BN <vinaysimha@inforcecomputing.com> + * + */ +#define DEBUG +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_bridge.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_dp_helper.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_of.h> +#include <drm/drm_panel.h> +#include <drm/drm_probe_helper.h> + +#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end)) +#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end)) + +/* Registers */ + +/* DSI D-PHY Layer Registers */ +#define D0W_DPHYCONTTX 0x0004 /* Data Lane 0 DPHY Tx Control */ +#define CLW_DPHYCONTRX 0x0020 /* Clock Lane DPHY Rx Control */ +#define D0W_DPHYCONTRX 0x0024 /* Data Lane 0 DPHY Rx Control */ +#define D1W_DPHYCONTRX 0x0028 /* Data Lane 1 DPHY Rx Control */ +#define D2W_DPHYCONTRX 0x002C /* Data Lane 2 DPHY Rx Control */ +#define D3W_DPHYCONTRX 0x0030 /* Data Lane 3 DPHY Rx Control */ +#define COM_DPHYCONTRX 0x0038 /* DPHY Rx Common Control */ +#define CLW_CNTRL 0x0040 /* Clock Lane Control */ +#define D0W_CNTRL 0x0044 /* Data Lane 0 Control */ +#define D1W_CNTRL 0x0048 /* Data Lane 1 Control */ +#define D2W_CNTRL 0x004C /* Data Lane 2 Control */ +#define D3W_CNTRL 0x0050 /* Data Lane 3 Control */ +#define DFTMODE_CNTRL 0x0054 /* DFT Mode Control */ + +/* DSI PPI Layer Registers */ +#define PPI_STARTPPI 0x0104 /* START control bit of PPI-TX function. */ +#define PPI_BUSYPPI 0x0108 +#define PPI_LINEINITCNT 0x0110 /* Line Initialization Wait Counter */ +#define PPI_LPTXTIMECNT 0x0114 +#define PPI_LANEENABLE 0x0134 /* Enables each lane at the PPI layer. */ +#define PPI_TX_RX_TA 0x013C /* DSI Bus Turn Around timing parameters */ + +/* Analog timer function enable */ +#define PPI_CLS_ATMR 0x0140 /* Delay for Clock Lane in LPRX */ +#define PPI_D0S_ATMR 0x0144 /* Delay for Data Lane 0 in LPRX */ +#define PPI_D1S_ATMR 0x0148 /* Delay for Data Lane 1 in LPRX */ +#define PPI_D2S_ATMR 0x014C /* Delay for Data Lane 2 in LPRX */ +#define PPI_D3S_ATMR 0x0150 /* Delay for Data Lane 3 in LPRX */ + +#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* For lane 0 */ +#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* For lane 1 */ +#define PPI_D2S_CLRSIPOCOUNT 0x016C /* For lane 2 */ +#define PPI_D3S_CLRSIPOCOUNT 0x0170 /* For lane 3 */ + +#define CLS_PRE 0x0180 /* Digital Counter inside of PHY IO */ +#define D0S_PRE 0x0184 /* Digital Counter inside of PHY IO */ +#define D1S_PRE 0x0188 /* Digital Counter inside of PHY IO */ +#define D2S_PRE 0x018C /* Digital Counter inside of PHY IO */ +#define D3S_PRE 0x0190 /* Digital Counter inside of PHY IO */ +#define CLS_PREP 0x01A0 /* Digital Counter inside of PHY IO */ +#define D0S_PREP 0x01A4 /* Digital Counter inside of PHY IO */ +#define D1S_PREP 0x01A8 /* Digital Counter inside of PHY IO */ +#define D2S_PREP 0x01AC /* Digital Counter inside of PHY IO */ +#define D3S_PREP 0x01B0 /* Digital Counter inside of PHY IO */ +#define CLS_ZERO 0x01C0 /* Digital Counter inside of PHY IO */ +#define D0S_ZERO 0x01C4 /* Digital Counter inside of PHY IO */ +#define D1S_ZERO 0x01C8 /* Digital Counter inside of PHY IO */ +#define D2S_ZERO 0x01CC /* Digital Counter inside of PHY IO */ +#define D3S_ZERO 0x01D0 /* Digital Counter inside of PHY IO */ + +#define PPI_CLRFLG 0x01E0 /* PRE Counters has reached set values */ +#define PPI_CLRSIPO 0x01E4 /* Clear SIPO values, Slave mode use only. */ +#define HSTIMEOUT 0x01F0 /* HS Rx Time Out Counter */ +#define HSTIMEOUTENABLE 0x01F4 /* Enable HS Rx Time Out Counter */ +#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX function */ +#define DSI_BUSYDSI 0x0208 +#define DSI_LANEENABLE 0x0210 /* Enables each lane at the Protocol layer. */ +#define DSI_LANESTATUS0 0x0214 /* Displays lane is in HS RX mode. */ +#define DSI_LANESTATUS1 0x0218 /* Displays lane is in ULPS or STOP state */ + +#define DSI_INTSTATUS 0x0220 /* Interrupt Status */ +#define DSI_INTMASK 0x0224 /* Interrupt Mask */ +#define DSI_INTCLR 0x0228 /* Interrupt Clear */ +#define DSI_LPTXTO 0x0230 /* Low Power Tx Time Out Counter */ + +#define DSIERRCNT 0x0300 /* DSI Error Count */ +#define APLCTRL 0x0400 /* Application Layer Control */ +#define RDPKTLN 0x0404 /* Command Read Packet Length */ + +#define VPCTRL 0x0450 /* Video Path Control */ +#define HTIM1 0x0454 /* Horizontal Timing Control 1 */ +#define HTIM2 0x0458 /* Horizontal Timing Control 2 */ +#define VTIM1 0x045C /* Vertical Timing Control 1 */ +#define VTIM2 0x0460 /* Vertical Timing Control 2 */ +#define VFUEN 0x0464 /* Video Frame Timing Update Enable */ + +/* Mux Input Select for LVDS LINK Input */ +#define LV_MX0003 0x0480 /* Bit 0 to 3 */ +#define LV_MX0407 0x0484 /* Bit 4 to 7 */ +#define LV_MX0811 0x0488 /* Bit 8 to 11 */ +#define LV_MX1215 0x048C /* Bit 12 to 15 */ +#define LV_MX1619 0x0490 /* Bit 16 to 19 */ +#define LV_MX2023 0x0494 /* Bit 20 to 23 */ +#define LV_MX2427 0x0498 /* Bit 24 to 27 */ +#define LV_MX(b0, b1, b2, b3) (FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | \ + FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24)) + +/* Input bit numbers used in mux registers */ +enum { + LVI_R0, + LVI_R1, + LVI_R2, + LVI_R3, + LVI_R4, + LVI_R5, + LVI_R6, + LVI_R7, + LVI_G0, + LVI_G1, + LVI_G2, + LVI_G3, + LVI_G4, + LVI_G5, + LVI_G6, + LVI_G7, + LVI_B0, + LVI_B1, + LVI_B2, + LVI_B3, + LVI_B4, + LVI_B5, + LVI_B6, + LVI_B7, + LVI_HS, + LVI_VS, + LVI_DE, + LVI_L0 +}; + +#define LVCFG 0x049C /* LVDS Configuration */ +#define LVPHY0 0x04A0 /* LVDS PHY 0 */ +#define LVPHY1 0x04A4 /* LVDS PHY 1 */ +#define SYSSTAT 0x0500 /* System Status */ +#define SYSRST 0x0504 /* System Reset */ +/* GPIO Registers */ +#define GPIOC 0x0520 /* GPIO Control */ +#define GPIOO 0x0524 /* GPIO Output */ +#define GPIOI 0x0528 /* GPIO Input */ + +/* I2C Registers */ +#define I2CTIMCTRL 0x0540 /* I2C IF Timing and Enable Control */ +#define I2CMADDR 0x0544 /* I2C Master Addressing */ +#define WDATAQ 0x0548 /* Write Data Queue */ +#define RDATAQ 0x054C /* Read Data Queue */ + +/* Chip ID and Revision ID Register */ +#define IDREG 0x0580 + +#define LPX_PERIOD 4 +#define TTA_GET 0x40000 +#define TTA_SURE 6 + +#define TC358775XBG_ID 0x00007500 + +/* Debug Registers */ +#define DEBUG00 0x05A0 /* Debug */ +#define DEBUG01 0x05A4 /* LVDS Data */ + +#define DSI_CLEN_BIT BIT(0) +#define DIVIDE_BY_3 3 /* PCLK=DCLK/3 */ +#define LVCFG_LVEN_BIT BIT(0) + +#define L0EN BIT(1) + + +#define TC358775_VPCTRL_VSDELAY__MASK 0x3FF00000 +#define TC358775_VPCTRL_VSDELAY__SHIFT 20 +static inline u32 TC358775_VPCTRL_VSDELAY(uint32_t val) +{ + return ((val) << TC358775_VPCTRL_VSDELAY__SHIFT) & + TC358775_VPCTRL_VSDELAY__MASK; +} + +#define TC358775_VPCTRL_OPXLFMT__MASK 0x00000100 +#define TC358775_VPCTRL_OPXLFMT__SHIFT 8 +static inline u32 TC358775_VPCTRL_OPXLFMT(uint32_t val) +{ + return ((val) << TC358775_VPCTRL_OPXLFMT__SHIFT) & + TC358775_VPCTRL_OPXLFMT__MASK; +} + +#define TC358775_VPCTRL_MSF__MASK 0x00000001 +#define TC358775_VPCTRL_MSF__SHIFT 0 +static inline u32 TC358775_VPCTRL_MSF(uint32_t val) +{ + return ((val) << TC358775_VPCTRL_MSF__SHIFT) & + TC358775_VPCTRL_MSF__MASK; +} + +#define TC358775_LVCFG_PCLKDIV__MASK 0x000000f0 +#define TC358775_LVCFG_PCLKDIV__SHIFT 4 +static inline u32 TC358775_LVCFG_PCLKDIV(uint32_t val) +{ + return ((val) << TC358775_LVCFG_PCLKDIV__SHIFT) & + TC358775_LVCFG_PCLKDIV__MASK; +} + +#define TC358775_LVCFG_LVDLINK__MASK 0x00000002 +#define TC358775_LVCFG_LVDLINK__SHIFT 0 +static inline u32 TC358775_LVCFG_LVDLINK(uint32_t val) +{ + return ((val) << TC358775_LVCFG_LVDLINK__SHIFT) & + TC358775_LVCFG_LVDLINK__MASK; +} + +static const char * const regulator_names[] = { + "vdd", + "vddio" +}; + +struct tc_data { + struct i2c_client *i2c; + + struct device *dev; + struct regmap *regmap; + + struct drm_bridge bridge; + struct drm_connector connector; + struct drm_panel *panel; + + enum drm_connector_status status; + struct device_node *host_node; + struct mipi_dsi_device *dsi; + u8 num_dsi_lanes; + + struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)]; + struct gpio_desc *reset_gpio; + struct gpio_desc *stby_gpio; + u32 rev; + u8 dual_link; /* single-link or dual-link */ +}; + +static inline struct tc_data *bridge_to_tc(struct drm_bridge *b) +{ + return container_of(b, struct tc_data, bridge); +} + +static inline struct tc_data *connector_to_tc(struct drm_connector *c) +{ + return container_of(c, struct tc_data, connector); +} + +static void tc_bridge_pre_enable(struct drm_bridge *bridge) +{ + struct tc_data *tc = bridge_to_tc(bridge); + struct device *dev = &tc->dsi->dev; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(tc->supplies), tc->supplies); + if (ret < 0) { + dev_err(dev, "regulator enable failed, %d\n", ret); + return; + } + usleep_range(10000, 20000); + + gpiod_set_value(tc->stby_gpio, 0); + usleep_range(10, 20); + + gpiod_set_value(tc->reset_gpio, 0); + usleep_range(10000, 20000); + + drm_panel_prepare(tc->panel); +} + +static void tc_bridge_disable(struct drm_bridge *bridge) +{ + struct tc_data *tc = bridge_to_tc(bridge); + struct device *dev = &tc->dsi->dev; + int ret; + + ret = regulator_bulk_disable(ARRAY_SIZE(tc->supplies), tc->supplies); + if (ret < 0) + dev_err(dev, "regulator disable failed, %d\n", ret); + usleep_range(30000, 40000); + + drm_panel_disable(tc->panel); +} + +static void tc_bridge_post_disable(struct drm_bridge *bridge) +{ + struct tc_data *tc = bridge_to_tc(bridge); + + gpiod_set_value(tc->stby_gpio, 1); + usleep_range(10, 20); + + gpiod_set_value(tc->reset_gpio, 1); + usleep_range(10000, 20000); + + drm_panel_unprepare(tc->panel); +} + +static int d2l_write(struct tc_data *tc, u16 reg, u32 data) +{ + int ret = 0; + + ret = regmap_bulk_write(tc->regmap, reg, (u32[]) {data}, 1); + + return ret; +} + +static void tc_bridge_enable(struct drm_bridge *bridge) +{ + struct tc_data *tc = bridge_to_tc(bridge); + int ret; + u32 hbpr, hpw, htime1, hfpr, hsize, htime2; + u32 vbpr, vpw, vtime1, vfpr, vsize, vtime2; + u32 val = 0; + u16 bus_formats; + struct drm_display_mode *mode; + + mode = &bridge->encoder->crtc->state->adjusted_mode; + + hbpr = 0; + hpw = mode->hsync_end - mode->hsync_start; + vbpr = 0; + vpw = mode->vsync_end - mode->vsync_start; + + htime1 = (hbpr << 16) + hpw; + vtime1 = (vbpr << 16) + vpw; + + hfpr = mode->hsync_start - mode->hdisplay; + hsize = mode->hdisplay; + vfpr = mode->vsync_start - mode->vdisplay; + vsize = mode->vdisplay; + + htime2 = (hfpr << 16) + hsize; + vtime2 = (vfpr << 16) + vsize; + + ret = regmap_read(tc->regmap, IDREG, &tc->rev); + if (ret) { + dev_err(tc->dev, "can not read device ID: %d\n", ret); + return; + } + dev_info(tc->dev, "DSI2LVDS Chip ID.%02x Revision ID. %02x\n", + (tc->rev>>8)&0xFF, (tc->rev)&0xFF); + + d2l_write(tc, SYSRST, 0x000000FF); + usleep_range(30000, 40000); + + d2l_write(tc, PPI_TX_RX_TA, TTA_GET | TTA_SURE); + d2l_write(tc, PPI_LPTXTIMECNT, LPX_PERIOD); + d2l_write(tc, PPI_D0S_CLRSIPOCOUNT, 3); + d2l_write(tc, PPI_D1S_CLRSIPOCOUNT, 3); + d2l_write(tc, PPI_D2S_CLRSIPOCOUNT, 3); + d2l_write(tc, PPI_D3S_CLRSIPOCOUNT, 3); + + val = ((L0EN << tc->num_dsi_lanes) - L0EN) | DSI_CLEN_BIT; + d2l_write(tc, PPI_LANEENABLE, val); + d2l_write(tc, DSI_LANEENABLE, val); + + d2l_write(tc, PPI_STARTPPI, 0x00000001); + d2l_write(tc, DSI_STARTDSI, 0x00000001); + + val = TC358775_VPCTRL_VSDELAY(21); //TODO : to set the dynamic value + + bus_formats = tc->connector.display_info.bus_formats[0]; + + if (bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG + || bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA) { + /* RGB888 */ + val |= TC358775_VPCTRL_OPXLFMT(1); + d2l_write(tc, VPCTRL, val); + } else { + /* RGB666 */ + val |= TC358775_VPCTRL_MSF(1); + d2l_write(tc, VPCTRL, val); + } + + d2l_write(tc, HTIM1, htime1); + d2l_write(tc, VTIM1, vtime1); + d2l_write(tc, HTIM2, htime2); + d2l_write(tc, VTIM2, vtime2); + + d2l_write(tc, VFUEN, 0x00000001); + d2l_write(tc, SYSRST, 0x00000004); + d2l_write(tc, LVPHY0, 0x00040006); + + /* default jeida-24 */ + if (bus_formats == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG) { + /* vesa-24, TODO jeida-18*/ + d2l_write(tc, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3)); + d2l_write(tc, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5, LVI_G0)); + d2l_write(tc, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_G6, LVI_G7)); + d2l_write(tc, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0)); + d2l_write(tc, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2)); + d2l_write(tc, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0)); + d2l_write(tc, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6)); + } + + d2l_write(tc, VFUEN, 0x00000001); + + val = TC358775_LVCFG_PCLKDIV(DIVIDE_BY_3) | LVCFG_LVEN_BIT; + if (tc->dual_link) + val |= TC358775_LVCFG_LVDLINK(1); + + d2l_write(tc, LVCFG, val); + + drm_panel_enable(tc->panel); +} + +static int tc_connector_get_modes(struct drm_connector *connector) +{ + struct tc_data *tc = connector_to_tc(connector); + struct edid *edid; + unsigned int count; + + if (tc->panel && tc->panel->funcs && tc->panel->funcs->get_modes) { + count = tc->panel->funcs->get_modes(tc->panel, connector); + if (count > 0) + return count; + } + + edid = drm_get_edid(connector, tc->i2c->adapter); + if (!edid) + return 0; + + drm_connector_update_edid_property(connector, edid); + count = drm_add_edid_modes(connector, edid); + kfree(edid); + + return count; +} + +static int tc_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct tc_data *tc = connector_to_tc(connector); + + /* Maximum pixel clock speed 135MHz-single-link/270MHz-dual-link */ + if ((mode->clock > 135000 && tc->dual_link == 0) || + (mode->clock > 270000 && tc->dual_link == 1)) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static struct drm_encoder * +tc_connector_best_encoder(struct drm_connector *connector) +{ + struct tc_data *tc = connector_to_tc(connector); + + return tc->bridge.encoder; +} + +static const struct drm_connector_helper_funcs tc_connector_helper_funcs = { + .get_modes = tc_connector_get_modes, + .mode_valid = tc_connector_mode_valid, + .best_encoder = tc_connector_best_encoder, +}; + +static const struct drm_connector_funcs tc_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +int tc358775_parse_dt(struct device_node *np, struct tc_data *tc) +{ + u32 num_lanes; + u8 dual_link; + + of_property_read_u8(np, "tc,dual-link", &dual_link); + of_property_read_u32(np, "tc,dsi-lanes", &num_lanes); + + if (num_lanes < 1 || num_lanes > 4) + return -EINVAL; + + tc->num_dsi_lanes = num_lanes; + tc->dual_link = dual_link; + + tc->host_node = of_graph_get_remote_node(np, 0, 0); + if (!tc->host_node) + return -ENODEV; + + of_node_put(tc->host_node); + + return 0; +} + +int tc358775_attach_dsi(struct tc_data *tc) +{ + struct device *dev = &tc->i2c->dev; + struct mipi_dsi_host *host; + struct mipi_dsi_device *dsi; + int ret = 0; + const struct mipi_dsi_device_info info = { .type = "tc358775", + .channel = 0, + .node = NULL, + }; + + host = of_find_mipi_dsi_host_by_node(tc->host_node); + if (!host) { + dev_err(dev, "failed to find dsi host\n"); + return -EPROBE_DEFER; + } + + dsi = mipi_dsi_device_register_full(host, &info); + if (IS_ERR(dsi)) { + dev_err(dev, "failed to create dsi device\n"); + ret = PTR_ERR(dsi); + goto err_dsi_device; + } + + tc->dsi = dsi; + + dsi->lanes = tc->num_dsi_lanes; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + dev_err(dev, "failed to attach dsi to host\n"); + goto err_dsi_attach; + } + + return 0; + +err_dsi_attach: + mipi_dsi_device_unregister(dsi); +err_dsi_device: + return ret; +} + +static int tc_bridge_attach(struct drm_bridge *bridge) +{ + struct tc_data *tc = bridge_to_tc(bridge); + struct drm_device *drm = bridge->dev; + int ret; + + /* Create LVDS connector */ + drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs); + ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs, + DRM_MODE_CONNECTOR_LVDS); + if (ret) + return ret; + + if (tc->panel) + drm_panel_attach(tc->panel, &tc->connector); + + drm_connector_attach_encoder(&tc->connector, tc->bridge.encoder); + + ret = tc358775_attach_dsi(tc); + + return ret; +} + +static const struct drm_bridge_funcs tc_bridge_funcs = { + .attach = tc_bridge_attach, + .pre_enable = tc_bridge_pre_enable, + .enable = tc_bridge_enable, + .disable = tc_bridge_disable, + .post_disable = tc_bridge_post_disable, +}; + +static const struct regmap_config tc_regmap_config = { + .name = "tc358775", + .reg_bits = 16, + .val_bits = 32, + .reg_stride = 4, + .max_register = 0x05A8, + .cache_type = REGCACHE_RBTREE, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + +static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct tc_data *tc; + int ret; + unsigned int i; + + tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL); + if (!tc) + return -ENOMEM; + + tc->dev = dev; + tc->i2c = client; + tc->status = connector_status_connected; + + /* port@1 is the output port */ + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &tc->panel, NULL); + if (ret && ret != -ENODEV) + return ret; + + ret = tc358775_parse_dt(dev->of_node, tc); + if (ret) + return ret; + + for (i = 0; i < ARRAY_SIZE(tc->supplies); i++) + tc->supplies[i].supply = regulator_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(tc->supplies), + tc->supplies); + if (ret < 0) + dev_err(dev, "failed to init regulator, ret=%d\n", ret); + + tc->stby_gpio = devm_gpiod_get(dev, "stby", GPIOD_OUT_HIGH); + if (IS_ERR(tc->stby_gpio)) { + ret = PTR_ERR(tc->stby_gpio); + dev_err(dev, "cannot get stby-gpio %d\n", ret); + return ret; + } + + tc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(tc->reset_gpio)) { + ret = PTR_ERR(tc->reset_gpio); + dev_err(dev, "cannot get reset-gpios %d\n", ret); + return ret; + } + + tc->regmap = devm_regmap_init_i2c(client, &tc_regmap_config); + if (IS_ERR(tc->regmap)) { + ret = PTR_ERR(tc->regmap); + dev_err(dev, "Failed to initialize regmap: %d\n", ret); + return ret; + } + + tc->bridge.funcs = &tc_bridge_funcs; + tc->bridge.of_node = dev->of_node; + drm_bridge_add(&tc->bridge); + + i2c_set_clientdata(client, tc); + + return 0; +} + +static int tc_remove(struct i2c_client *client) +{ + struct tc_data *tc = i2c_get_clientdata(client); + + drm_bridge_remove(&tc->bridge); + + return 0; +} + +static const struct i2c_device_id tc358775_i2c_ids[] = { + { "tc358775", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tc358775_i2c_ids); + +static const struct of_device_id tc358775_of_ids[] = { + { .compatible = "toshiba,tc358775", }, + { } +}; +MODULE_DEVICE_TABLE(of, tc358775_of_ids); + +static struct i2c_driver tc358775_driver = { + .driver = { + .name = "tc358775", + .of_match_table = tc358775_of_ids, + }, + .id_table = tc358775_i2c_ids, + .probe = tc_probe, + .remove = tc_remove, +}; +module_i2c_driver(tc358775_driver); + +MODULE_AUTHOR("Vinay Simha BN <vinaysimha@inforcecomputing.com>"); +MODULE_DESCRIPTION("tc358775 LVDS encoder driver"); +MODULE_LICENSE("GPL v2");
dsi2lvds tc358775 bridge driver added Tested in apq8016, ifc6309 board and panel auo,b101xtn01 Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> --- v1: Initial version v2: * Andrzej Hajda review comments incorporated SPDX identifier development debug removed alphabetic order headers u32 instead of unit32_t magic numbers to macros for CLRSI and mux registers ignored return value * Laurent Pinchart review comments incorporated mdelay to usleep_range bus_formats added --- drivers/gpu/drm/bridge/Kconfig | 10 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/tc358775.c | 688 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 699 insertions(+) create mode 100644 drivers/gpu/drm/bridge/tc358775.c