| Message ID | 1642520854-32196-1-git-send-email-loic.poulain@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] drm/msm: add support for QCM2290 MDSS | expand |
On 18/01/2022 18:47, Loic Poulain wrote: > Add compatibility for QCM2290 display subsystem, including > required entries in DPU hw catalog. > > Signed-off-by: Loic Poulain <loic.poulain@linaro.org> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 175 ++++++++++++++++++++++++- > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + > drivers/gpu/drm/msm/msm_drv.c | 1 + > 4 files changed, 177 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > index ce6f32a..7fa3fc7 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > @@ -25,6 +25,8 @@ > #define VIG_SM8250_MASK \ > (VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3LITE)) > > +#define VIG_QCM2290_MASK VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) > + > #define DMA_SDM845_MASK \ > (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\ > BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\ > @@ -251,6 +253,18 @@ static const struct dpu_caps sc7280_dpu_caps = { > .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, > }; > > +static const struct dpu_caps qcm2290_dpu_caps = { > + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > + .max_mixer_blendstages = 0x4, > + .qseed_type = DPU_SSPP_SCALER_QSEED4, If there is no scaler, we probably shouldn't define it here too. > + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, > + .ubwc_version = DPU_HW_UBWC_VER_20, > + .has_dim_layer = true, > + .has_idle_pc = true, > + .max_linewidth = 2160, > + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, > +}; > + > static const struct dpu_mdp_cfg sdm845_mdp[] = { > { > .name = "top_0", .id = MDP_TOP, > @@ -336,6 +350,19 @@ static const struct dpu_mdp_cfg sc7280_mdp[] = { > }, > }; > > +static const struct dpu_mdp_cfg qcm2290_mdp[] = { > + { > + .name = "top_0", .id = MDP_TOP, > + .base = 0x0, .len = 0x494, > + .features = 0, > + .highest_bank_bit = 0x2, > + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { > + .reg_off = 0x2AC, .bit_off = 0}, > + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { > + .reg_off = 0x2AC, .bit_off = 8}, > + }, > +}; > + > /************************************************************* > * CTL sub blocks config > *************************************************************/ > @@ -459,6 +486,15 @@ static const struct dpu_ctl_cfg sc7280_ctl[] = { > }, > }; > > +static const struct dpu_ctl_cfg qcm2290_ctl[] = { > + { > + .name = "ctl_0", .id = CTL_0, > + .base = 0x1000, .len = 0x1dc, > + .features = BIT(DPU_CTL_ACTIVE_CFG), > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9), > + }, > +}; > + > /************************************************************* > * SSPP sub blocks config > *************************************************************/ > @@ -595,6 +631,30 @@ static const struct dpu_sspp_cfg sc7280_sspp[] = { > sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1), > }; > > + > +#define _QCM2290_VIG_SBLK(num, sdma_pri) \ Let's call it _VIG_SBLK_NOSCALE? > + { \ > + .maxdwnscale = SSPP_UNITY_SCALE, \ > + .maxupscale = SSPP_UNITY_SCALE, \ > + .smart_dma_priority = sdma_pri, \ > + .src_blk = {.name = STRCAT("sspp_src_", num), \ > + .id = DPU_SSPP_SRC, .base = 0x00, .len = 0x150,}, \ No scaler for VIG SSPP? > + .format_list = plane_formats_yuv, \ > + .num_formats = ARRAY_SIZE(plane_formats_yuv), \ > + .virt_format_list = plane_formats, \ > + .virt_num_formats = ARRAY_SIZE(plane_formats), \ > + } > + > +static const struct dpu_sspp_sub_blks qcm2290_vig_sblk_0 = _QCM2290_VIG_SBLK("0", 2); > +static const struct dpu_sspp_sub_blks qcm2290_dma_sblk_0 = _DMA_SBLK("8", 1); > + > +static const struct dpu_sspp_cfg qcm2290_sspp[] = { > + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_QCM2290_MASK, > + qcm2290_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), > + SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK, > + qcm2290_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0), > +}; > + > /************************************************************* > * MIXER sub blocks config > *************************************************************/ > @@ -679,6 +739,21 @@ static const struct dpu_lm_cfg sc7280_lm[] = { > &sc7180_lm_sblk, PINGPONG_3, LM_2, 0), > }; > > +/* QCM2290 */ > + > +static const struct dpu_lm_sub_blks qcm2290_lm_sblk = { > + .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH, > + .maxblendstages = 4, /* excluding base layer */ > + .blendstage_base = { /* offsets relative to mixer base */ > + 0x20, 0x38, 0x50, 0x68 > + }, > +}; > + > +static const struct dpu_lm_cfg qcm2290_lm[] = { > + LM_BLK("lm_0", LM_0, 0x44000, MIXER_SC7180_MASK, > + &qcm2290_lm_sblk, PINGPONG_0, 0, DSPP_0), > +}; > + > /************************************************************* > * DSPP sub blocks config > *************************************************************/ > @@ -692,6 +767,11 @@ static const struct dpu_dspp_sub_blks sm8150_dspp_sblk = { > .len = 0x90, .version = 0x40000}, > }; > > +static const struct dpu_dspp_sub_blks qcm2290_dspp_sblk = { > + .pcc = {.id = DPU_DSPP_PCC, .base = 0x1700, > + .len = 0x90, .version = 0x40000}, > +}; > + Use sm8150_dspp_sblk here > #define DSPP_BLK(_name, _id, _base, _mask, _sblk) \ > {\ > .name = _name, .id = _id, \ > @@ -716,6 +796,11 @@ static const struct dpu_dspp_cfg sm8150_dspp[] = { > &sm8150_dspp_sblk), > }; > > +static const struct dpu_dspp_cfg qcm2290_dspp[] = { > + DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK, > + &qcm2290_dspp_sblk), > +}; > + > /************************************************************* > * PINGPONG sub blocks config > *************************************************************/ > @@ -736,6 +821,11 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = { > .len = 0x20, .version = 0x20000}, > }; > > +static const struct dpu_pingpong_sub_blks qcm2290_pp_sblk = { > + .dither = {.id = DPU_PINGPONG_DITHER, .base = 0x30e0, > + .len = 0x20, .version = 0x10000}, > +}; > + You can use sdm845_pp_sblk instead. > #define PP_BLK_TE(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \ > {\ > .name = _name, .id = _id, \ > @@ -798,6 +888,12 @@ static const struct dpu_pingpong_cfg sm8150_pp[] = { > -1), > }; > > +static struct dpu_pingpong_cfg qcm2290_pp[] = { > + PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, qcm2290_pp_sblk, > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8), > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12)), > +}; > + > /************************************************************* > * MERGE_3D sub blocks config > *************************************************************/ > @@ -861,6 +957,11 @@ static const struct dpu_intf_cfg sc7280_intf[] = { > INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), > }; > > +static const struct dpu_intf_cfg qcm2290_intf[] = { > + INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0), > + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), > +}; > + > /************************************************************* > * VBIF sub blocks config > *************************************************************/ > @@ -931,6 +1032,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = { > {.fl = 0, .lut = 0x0011222222223357 }, > }; > > +static const struct dpu_qos_lut_entry qcm2290_qos_linear[] = { > + {.fl = 0, .lut = 0x0011222222335777}, > +}; > + > static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = { > {.fl = 10, .lut = 0x344556677}, > {.fl = 11, .lut = 0x3344556677}, > @@ -1102,6 +1207,42 @@ static const struct dpu_perf_cfg sc7280_perf_data = { > .bw_inefficiency_factor = 120, > }; > > +static const struct dpu_perf_cfg qcm2290_perf_data = { > + .max_bw_low = 2700000, > + .max_bw_high = 2700000, > + .min_core_ib = 1300000, > + .min_llcc_ib = 0, > + .min_dram_ib = 1600000, > + .min_prefill_lines = 24, > + .danger_lut_tbl = {0xff, 0x0, 0x0}, > + .safe_lut_tbl = {0xfff0, 0x0, 0x0}, > + .qos_lut_tbl = { > + {.nentry = ARRAY_SIZE(qcm2290_qos_linear), > + .entries = qcm2290_qos_linear > + }, > + }, > + .cdp_cfg = { > + {.rd_enable = 1, .wr_enable = 1}, > + {.rd_enable = 1, .wr_enable = 0} > + }, > + .clk_inefficiency_factor = 105, > + .bw_inefficiency_factor = 120, > +}; > + > +static const struct dpu_vbif_cfg qcm2290_vbif[] = { > + { > + .name = "vbif_0", .id = VBIF_0, > + .base = 0, .len = 0x1040, > + .features = BIT(DPU_VBIF_QOS_REMAP), > + .xin_halt_timeout = 0x4000, > + .qos_rt_tbl = { > + .npriority_lvl = ARRAY_SIZE(sdm845_rt_pri_lvl), > + .priority_lvl = sdm845_rt_pri_lvl, > + }, > + .memtype_count = 14, > + .memtype = {3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3}, > + }, > +}; The only difference from sdm845_vbif is the lack of .qos_nrt_tbl. Is this on purpose? > /************************************************************* > * Hardware catalog init > *************************************************************/ > @@ -1255,6 +1396,38 @@ static void sc7280_cfg_init(struct dpu_mdss_cfg *dpu_cfg) > }; > } > > + > +/* > + * qcm2290_cfg_init(): populate qcm2290 dpu sub-blocks reg offsets > + * and instance counts. > + */ > +static void qcm2290_cfg_init(struct dpu_mdss_cfg *dpu_cfg) > +{ > + *dpu_cfg = (struct dpu_mdss_cfg){ > + .caps = &qcm2290_dpu_caps, > + .mdp_count = ARRAY_SIZE(qcm2290_mdp), > + .mdp = qcm2290_mdp, > + .ctl_count = ARRAY_SIZE(qcm2290_ctl), > + .ctl = qcm2290_ctl, > + .sspp_count = ARRAY_SIZE(qcm2290_sspp), > + .sspp = qcm2290_sspp, > + .mixer_count = ARRAY_SIZE(qcm2290_lm), > + .mixer = qcm2290_lm, > + .dspp_count = ARRAY_SIZE(qcm2290_dspp), > + .dspp = qcm2290_dspp, > + .pingpong_count = ARRAY_SIZE(qcm2290_pp), > + .pingpong = qcm2290_pp, > + .intf_count = ARRAY_SIZE(qcm2290_intf), > + .intf = qcm2290_intf, > + .vbif_count = ARRAY_SIZE(qcm2290_vbif), > + .vbif = qcm2290_vbif, > + .reg_dma_count = 1, > + .dma_cfg = sdm845_regdma, > + .perf = qcm2290_perf_data, > + .mdss_irqs = IRQ_SC7180_MASK, > + }; > +} > + > static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { > { .hw_rev = DPU_HW_VER_400, .cfg_init = sdm845_cfg_init}, > { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, > @@ -1262,6 +1435,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { > { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init}, > { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init}, > { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init}, > + { .hw_rev = DPU_HW_VER_650, .cfg_init = qcm2290_cfg_init}, > { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init}, > }; > > @@ -1291,4 +1465,3 @@ struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev) > dpu_hw_catalog_deinit(dpu_cfg); > return ERR_PTR(-ENODEV); > } > - > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > index 4ade44b..6d4eb46f 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > @@ -41,6 +41,7 @@ > #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */ > #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */ > #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */ > +#define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */ > #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */ > > #define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170) > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > index a15b264..7e8d8a6 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > @@ -1286,6 +1286,7 @@ static const struct dev_pm_ops dpu_pm_ops = { > }; > > static const struct of_device_id dpu_dt_match[] = { > + { .compatible = "qcom,qcm2290-dpu", }, > { .compatible = "qcom,sdm845-dpu", }, > { .compatible = "qcom,sc7180-dpu", }, > { .compatible = "qcom,sc7280-dpu", }, > diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c > index 7936e8d..ebd5266 100644 > --- a/drivers/gpu/drm/msm/msm_drv.c > +++ b/drivers/gpu/drm/msm/msm_drv.c > @@ -1434,6 +1434,7 @@ static void msm_pdev_shutdown(struct platform_device *pdev) > static const struct of_device_id dt_match[] = { > { .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 }, > { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 }, > + { .compatible = "qcom,qcm2290-mdss", .data = (void *)KMS_DPU }, > { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, > { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, > { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
Hi Dmitry, On Tue, 18 Jan 2022 at 19:02, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > On 18/01/2022 18:47, Loic Poulain wrote: > > Add compatibility for QCM2290 display subsystem, including > > required entries in DPU hw catalog. > > > > Signed-off-by: Loic Poulain <loic.poulain@linaro.org> > > --- > > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 175 ++++++++++++++++++++++++- > > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + > > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + > > drivers/gpu/drm/msm/msm_drv.c | 1 + > > 4 files changed, 177 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > > index ce6f32a..7fa3fc7 100644 > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > > @@ -25,6 +25,8 @@ > > #define VIG_SM8250_MASK \ [...] > > +static const struct dpu_vbif_cfg qcm2290_vbif[] = { > > + { > > + .name = "vbif_0", .id = VBIF_0, > > + .base = 0, .len = 0x1040, > > + .features = BIT(DPU_VBIF_QOS_REMAP), > > + .xin_halt_timeout = 0x4000, > > + .qos_rt_tbl = { > > + .npriority_lvl = ARRAY_SIZE(sdm845_rt_pri_lvl), > > + .priority_lvl = sdm845_rt_pri_lvl, > > + }, > > + .memtype_count = 14, > > + .memtype = {3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3}, > > + }, > > +}; > > The only difference from sdm845_vbif is the lack of .qos_nrt_tbl. Is > this on purpose? Yes, I've not found any info related to non-rt for QCM2290 dpu, but I assume it would be safe to just use sdm845_vbif here, as the others. Regards, Loic
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index ce6f32a..7fa3fc7 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -25,6 +25,8 @@ #define VIG_SM8250_MASK \ (VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3LITE)) +#define VIG_QCM2290_MASK VIG_MASK + #define DMA_SDM845_MASK \ (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\ BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\ @@ -251,6 +253,18 @@ static const struct dpu_caps sc7280_dpu_caps = { .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, }; +static const struct dpu_caps qcm2290_dpu_caps = { + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, + .max_mixer_blendstages = 0x4, + .qseed_type = DPU_SSPP_SCALER_QSEED4, + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, + .ubwc_version = DPU_HW_UBWC_VER_20, + .has_dim_layer = true, + .has_idle_pc = true, + .max_linewidth = 2160, + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, +}; + static const struct dpu_mdp_cfg sdm845_mdp[] = { { .name = "top_0", .id = MDP_TOP, @@ -336,6 +350,19 @@ static const struct dpu_mdp_cfg sc7280_mdp[] = { }, }; +static const struct dpu_mdp_cfg qcm2290_mdp[] = { + { + .name = "top_0", .id = MDP_TOP, + .base = 0x0, .len = 0x494, + .features = 0, + .highest_bank_bit = 0x2, + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { + .reg_off = 0x2AC, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { + .reg_off = 0x2AC, .bit_off = 8}, + }, +}; + /************************************************************* * CTL sub blocks config *************************************************************/ @@ -459,6 +486,15 @@ static const struct dpu_ctl_cfg sc7280_ctl[] = { }, }; +static const struct dpu_ctl_cfg qcm2290_ctl[] = { + { + .name = "ctl_0", .id = CTL_0, + .base = 0x1000, .len = 0x1dc, + .features = BIT(DPU_CTL_ACTIVE_CFG), + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9), + }, +}; + /************************************************************* * SSPP sub blocks config *************************************************************/ @@ -595,6 +631,30 @@ static const struct dpu_sspp_cfg sc7280_sspp[] = { sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1), }; + +#define _QCM2290_VIG_SBLK(num, sdma_pri) \ + { \ + .maxdwnscale = SSPP_UNITY_SCALE, \ + .maxupscale = SSPP_UNITY_SCALE, \ + .smart_dma_priority = sdma_pri, \ + .src_blk = {.name = STRCAT("sspp_src_", num), \ + .id = DPU_SSPP_SRC, .base = 0x00, .len = 0x150,}, \ + .format_list = plane_formats_yuv, \ + .num_formats = ARRAY_SIZE(plane_formats_yuv), \ + .virt_format_list = plane_formats, \ + .virt_num_formats = ARRAY_SIZE(plane_formats), \ + } + +static const struct dpu_sspp_sub_blks qcm2290_vig_sblk_0 = _QCM2290_VIG_SBLK("0", 2); +static const struct dpu_sspp_sub_blks qcm2290_dma_sblk_0 = _DMA_SBLK("8", 1); + +static const struct dpu_sspp_cfg qcm2290_sspp[] = { + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_QCM2290_MASK, + qcm2290_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), + SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK, + qcm2290_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0), +}; + /************************************************************* * MIXER sub blocks config *************************************************************/ @@ -679,6 +739,21 @@ static const struct dpu_lm_cfg sc7280_lm[] = { &sc7180_lm_sblk, PINGPONG_3, LM_2, 0), }; +/* QCM2290 */ + +static const struct dpu_lm_sub_blks qcm2290_lm_sblk = { + .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH, + .maxblendstages = 4, /* excluding base layer */ + .blendstage_base = { /* offsets relative to mixer base */ + 0x20, 0x38, 0x50, 0x68 + }, +}; + +static const struct dpu_lm_cfg qcm2290_lm[] = { + LM_BLK("lm_0", LM_0, 0x44000, MIXER_SC7180_MASK, + &qcm2290_lm_sblk, PINGPONG_0, 0, DSPP_0), +}; + /************************************************************* * DSPP sub blocks config *************************************************************/ @@ -692,6 +767,11 @@ static const struct dpu_dspp_sub_blks sm8150_dspp_sblk = { .len = 0x90, .version = 0x40000}, }; +static const struct dpu_dspp_sub_blks qcm2290_dspp_sblk = { + .pcc = {.id = DPU_DSPP_PCC, .base = 0x1700, + .len = 0x90, .version = 0x40000}, +}; + #define DSPP_BLK(_name, _id, _base, _mask, _sblk) \ {\ .name = _name, .id = _id, \ @@ -716,6 +796,11 @@ static const struct dpu_dspp_cfg sm8150_dspp[] = { &sm8150_dspp_sblk), }; +static const struct dpu_dspp_cfg qcm2290_dspp[] = { + DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK, + &qcm2290_dspp_sblk), +}; + /************************************************************* * PINGPONG sub blocks config *************************************************************/ @@ -736,6 +821,11 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = { .len = 0x20, .version = 0x20000}, }; +static const struct dpu_pingpong_sub_blks qcm2290_pp_sblk = { + .dither = {.id = DPU_PINGPONG_DITHER, .base = 0x30e0, + .len = 0x20, .version = 0x10000}, +}; + #define PP_BLK_TE(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \ {\ .name = _name, .id = _id, \ @@ -798,6 +888,12 @@ static const struct dpu_pingpong_cfg sm8150_pp[] = { -1), }; +static struct dpu_pingpong_cfg qcm2290_pp[] = { + PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, qcm2290_pp_sblk, + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8), + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12)), +}; + /************************************************************* * MERGE_3D sub blocks config *************************************************************/ @@ -861,6 +957,11 @@ static const struct dpu_intf_cfg sc7280_intf[] = { INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23), }; +static const struct dpu_intf_cfg qcm2290_intf[] = { + INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0), + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27), +}; + /************************************************************* * VBIF sub blocks config *************************************************************/ @@ -931,6 +1032,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = { {.fl = 0, .lut = 0x0011222222223357 }, }; +static const struct dpu_qos_lut_entry qcm2290_qos_linear[] = { + {.fl = 0, .lut = 0x0011222222335777}, +}; + static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = { {.fl = 10, .lut = 0x344556677}, {.fl = 11, .lut = 0x3344556677}, @@ -1102,6 +1207,42 @@ static const struct dpu_perf_cfg sc7280_perf_data = { .bw_inefficiency_factor = 120, }; +static const struct dpu_perf_cfg qcm2290_perf_data = { + .max_bw_low = 2700000, + .max_bw_high = 2700000, + .min_core_ib = 1300000, + .min_llcc_ib = 0, + .min_dram_ib = 1600000, + .min_prefill_lines = 24, + .danger_lut_tbl = {0xff, 0x0, 0x0}, + .safe_lut_tbl = {0xfff0, 0x0, 0x0}, + .qos_lut_tbl = { + {.nentry = ARRAY_SIZE(qcm2290_qos_linear), + .entries = qcm2290_qos_linear + }, + }, + .cdp_cfg = { + {.rd_enable = 1, .wr_enable = 1}, + {.rd_enable = 1, .wr_enable = 0} + }, + .clk_inefficiency_factor = 105, + .bw_inefficiency_factor = 120, +}; + +static const struct dpu_vbif_cfg qcm2290_vbif[] = { + { + .name = "vbif_0", .id = VBIF_0, + .base = 0, .len = 0x1040, + .features = BIT(DPU_VBIF_QOS_REMAP), + .xin_halt_timeout = 0x4000, + .qos_rt_tbl = { + .npriority_lvl = ARRAY_SIZE(sdm845_rt_pri_lvl), + .priority_lvl = sdm845_rt_pri_lvl, + }, + .memtype_count = 14, + .memtype = {3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3}, + }, +}; /************************************************************* * Hardware catalog init *************************************************************/ @@ -1255,6 +1396,38 @@ static void sc7280_cfg_init(struct dpu_mdss_cfg *dpu_cfg) }; } + +/* + * qcm2290_cfg_init(): populate qcm2290 dpu sub-blocks reg offsets + * and instance counts. + */ +static void qcm2290_cfg_init(struct dpu_mdss_cfg *dpu_cfg) +{ + *dpu_cfg = (struct dpu_mdss_cfg){ + .caps = &qcm2290_dpu_caps, + .mdp_count = ARRAY_SIZE(qcm2290_mdp), + .mdp = qcm2290_mdp, + .ctl_count = ARRAY_SIZE(qcm2290_ctl), + .ctl = qcm2290_ctl, + .sspp_count = ARRAY_SIZE(qcm2290_sspp), + .sspp = qcm2290_sspp, + .mixer_count = ARRAY_SIZE(qcm2290_lm), + .mixer = qcm2290_lm, + .dspp_count = ARRAY_SIZE(qcm2290_dspp), + .dspp = qcm2290_dspp, + .pingpong_count = ARRAY_SIZE(qcm2290_pp), + .pingpong = qcm2290_pp, + .intf_count = ARRAY_SIZE(qcm2290_intf), + .intf = qcm2290_intf, + .vbif_count = ARRAY_SIZE(qcm2290_vbif), + .vbif = qcm2290_vbif, + .reg_dma_count = 1, + .dma_cfg = sdm845_regdma, + .perf = qcm2290_perf_data, + .mdss_irqs = IRQ_SC7180_MASK, + }; +} + static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { { .hw_rev = DPU_HW_VER_400, .cfg_init = sdm845_cfg_init}, { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, @@ -1262,6 +1435,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init}, { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init}, { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init}, + { .hw_rev = DPU_HW_VER_650, .cfg_init = qcm2290_cfg_init}, { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init}, }; @@ -1291,4 +1465,3 @@ struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev) dpu_hw_catalog_deinit(dpu_cfg); return ERR_PTR(-ENODEV); } - diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index 4ade44b..6d4eb46f 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -41,6 +41,7 @@ #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */ #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */ #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */ +#define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */ #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */ #define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index a15b264..7e8d8a6 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -1286,6 +1286,7 @@ static const struct dev_pm_ops dpu_pm_ops = { }; static const struct of_device_id dpu_dt_match[] = { + { .compatible = "qcom,qcm2290-dpu", }, { .compatible = "qcom,sdm845-dpu", }, { .compatible = "qcom,sc7180-dpu", }, { .compatible = "qcom,sc7280-dpu", }, diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 7936e8d..ebd5266 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -1434,6 +1434,7 @@ static void msm_pdev_shutdown(struct platform_device *pdev) static const struct of_device_id dt_match[] = { { .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 }, { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 }, + { .compatible = "qcom,qcm2290-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
Add compatibility for QCM2290 display subsystem, including required entries in DPU hw catalog. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 175 ++++++++++++++++++++++++- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + drivers/gpu/drm/msm/msm_drv.c | 1 + 4 files changed, 177 insertions(+), 1 deletion(-)