diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c
new file mode 100644
index 0000000..c6d545d
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c
@@ -0,0 +1,1504 @@
+/*
+ * Copyright © 2012 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Keith Packard <keithp@keithp.com>
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_drm.h"
+#include "psb_intel_reg.h"
+#include "drm_dp_helper.h"
+
+
+#define DP_LINK_STATUS_SIZE	6
+#define DP_LINK_CHECK_TIMEOUT	(10 * 1000)
+
+#define DP_LINK_CONFIGURATION_SIZE	9
+
+#define CDV_FAST_LINK_TRAIN	1
+
+struct psb_intel_dp {
+	uint32_t output_reg;
+	uint32_t DP;
+	uint8_t  link_configuration[DP_LINK_CONFIGURATION_SIZE];
+	bool has_audio;
+	int force_audio;
+	uint32_t color_range;
+	uint8_t link_bw;
+	uint8_t lane_count;
+	uint8_t dpcd[4];
+	struct psb_intel_output *output;
+	struct i2c_adapter adapter;
+	struct i2c_algo_dp_aux_data algo;
+	uint8_t	train_set[4];
+	uint8_t link_status[DP_LINK_STATUS_SIZE];
+};
+
+struct ddi_regoff {
+	uint32_t	PreEmph1;
+	uint32_t	PreEmph2;
+	uint32_t	VSwing1;
+	uint32_t	VSwing2;
+	uint32_t	VSwing3;
+	uint32_t	VSwing4;
+	uint32_t	VSwing5;
+};
+
+static struct ddi_regoff ddi_DP_train_table[] = {
+	{.PreEmph1 = 0x812c, .PreEmph2 = 0x8124, .VSwing1 = 0x8154,
+	.VSwing2 = 0x8148, .VSwing3 = 0x814C, .VSwing4 = 0x8150,
+	.VSwing5 = 0x8158,},
+	{.PreEmph1 = 0x822c, .PreEmph2 = 0x8224, .VSwing1 = 0x8254,
+	.VSwing2 = 0x8248, .VSwing3 = 0x824C, .VSwing4 = 0x8250,
+	.VSwing5 = 0x8258,},
+};
+
+static uint32_t dp_vswing_premph_table[] = {
+        0x55338954,	0x4000,
+        0x554d8954,	0x2000,
+        0x55668954,	0,
+        0x559ac0d4,	0x6000,
+};
+/**
+ * is_edp - is the given port attached to an eDP panel (either CPU or PCH)
+ * @intel_dp: DP struct
+ *
+ * If a CPU or PCH DP output is attached to an eDP panel, this function
+ * will return true, and false otherwise.
+ */
+static bool is_edp(struct psb_intel_output *output)
+{
+	return output->type == INTEL_OUTPUT_EDP;
+}
+
+
+static void psb_intel_dp_start_link_train(struct psb_intel_output *output);
+static void psb_intel_dp_complete_link_train(struct psb_intel_output *output);
+static void psb_intel_dp_link_down(struct psb_intel_output *output);
+
+static int
+psb_intel_dp_max_lane_count(struct psb_intel_output *output)
+{
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	int max_lane_count = 4;
+
+	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) {
+		max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f;
+		switch (max_lane_count) {
+		case 1: case 2: case 4:
+			break;
+		default:
+			max_lane_count = 4;
+		}
+	}
+	return max_lane_count;
+}
+
+static int
+psb_intel_dp_max_link_bw(struct psb_intel_output *output)
+{
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE];
+
+	switch (max_link_bw) {
+	case DP_LINK_BW_1_62:
+	case DP_LINK_BW_2_7:
+		break;
+	default:
+		max_link_bw = DP_LINK_BW_1_62;
+		break;
+	}
+	return max_link_bw;
+}
+
+static int
+psb_intel_dp_link_clock(uint8_t link_bw)
+{
+	if (link_bw == DP_LINK_BW_2_7)
+		return 270000;
+	else
+		return 162000;
+}
+
+static int
+psb_intel_dp_link_required(int pixel_clock, int bpp)
+{
+	return (pixel_clock * bpp + 7) / 8;
+}
+
+static int
+psb_intel_dp_max_data_rate(int max_link_clock, int max_lanes)
+{
+	return (max_link_clock * max_lanes * 19) / 20;
+}
+
+static int
+psb_intel_dp_mode_valid(struct drm_connector *connector,
+		    struct drm_display_mode *mode)
+{
+	struct psb_intel_output *output = to_psb_intel_output(connector);
+	struct drm_device *dev = connector->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int max_link_clock = psb_intel_dp_link_clock(psb_intel_dp_max_link_bw(output));
+	int max_lanes = psb_intel_dp_max_lane_count(output);
+
+	if (is_edp(output) && dev_priv->panel_fixed_mode) {
+		if (mode->hdisplay > dev_priv->panel_fixed_mode->hdisplay)
+			return MODE_PANEL;
+
+		if (mode->vdisplay > dev_priv->panel_fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+
+	/* only refuse the mode on non eDP since we have seen some weird eDP panels
+	   which are outside spec tolerances but somehow work by magic */
+	if (!is_edp(output) &&
+	    (psb_intel_dp_link_required(mode->clock, 24)
+	     > psb_intel_dp_max_data_rate(max_link_clock, max_lanes)))
+		return MODE_CLOCK_HIGH;
+
+	if (mode->clock < 10000)
+		return MODE_CLOCK_LOW;
+
+	return MODE_OK;
+}
+
+static uint32_t
+pack_aux(uint8_t *src, int src_bytes)
+{
+	int	i;
+	uint32_t v = 0;
+
+	if (src_bytes > 4)
+		src_bytes = 4;
+	for (i = 0; i < src_bytes; i++)
+		v |= ((uint32_t) src[i]) << ((3-i) * 8);
+	return v;
+}
+
+static void
+unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes)
+{
+	int i;
+	if (dst_bytes > 4)
+		dst_bytes = 4;
+	for (i = 0; i < dst_bytes; i++)
+		dst[i] = src >> ((3-i) * 8);
+}
+
+static int
+psb_intel_dp_aux_ch(struct psb_intel_output *output,
+		uint8_t *send, int send_bytes,
+		uint8_t *recv, int recv_size)
+{
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	uint32_t output_reg = intel_dp->output_reg;
+	struct drm_device *dev = output->base.dev;
+	uint32_t ch_ctl = output_reg + 0x10;
+	uint32_t ch_data = ch_ctl + 4;
+	int i;
+	int recv_bytes;
+	uint32_t status;
+	uint32_t aux_clock_divider;
+	int try, precharge;
+
+	/* The clock divider is based off the hrawclk,
+	 * and would like to run at 2MHz. So, take the
+	 * hrawclk value and divide by 2 and use that
+	 * On CDV platform it uses 200MHz as hrawclk.
+	 *
+	 */
+	aux_clock_divider = 200 / 2;
+
+	precharge = 4;
+
+	if (REG_READ(ch_ctl) & DP_AUX_CH_CTL_SEND_BUSY) {
+		DRM_ERROR("dp_aux_ch not started status 0x%08x\n",
+			  REG_READ(ch_ctl));
+		return -EBUSY;
+	}
+
+	/* Must try at least 3 times according to DP spec */
+	for (try = 0; try < 5; try++) {
+		/* Load the send data into the aux channel data registers */
+		for (i = 0; i < send_bytes; i += 4)
+			REG_WRITE(ch_data + i,
+				   pack_aux(send + i, send_bytes - i));
+	
+		/* Send the command and wait for it to complete */
+		REG_WRITE(ch_ctl,
+			   DP_AUX_CH_CTL_SEND_BUSY |
+			   DP_AUX_CH_CTL_TIME_OUT_400us |
+			   (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+			   (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
+			   (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) |
+			   DP_AUX_CH_CTL_DONE |
+			   DP_AUX_CH_CTL_TIME_OUT_ERROR |
+			   DP_AUX_CH_CTL_RECEIVE_ERROR);
+		for (;;) {
+			status = REG_READ(ch_ctl);
+			if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+				break;
+			udelay(100);
+		}
+	
+		/* Clear done status and any errors */
+		REG_WRITE(ch_ctl,
+			   status |
+			   DP_AUX_CH_CTL_DONE |
+			   DP_AUX_CH_CTL_TIME_OUT_ERROR |
+			   DP_AUX_CH_CTL_RECEIVE_ERROR);
+		if (status & DP_AUX_CH_CTL_DONE)
+			break;
+	}
+
+	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
+		DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
+		return -EBUSY;
+	}
+
+	/* Check for timeout or receive error.
+	 * Timeouts occur when the sink is not connected
+	 */
+	if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
+		DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
+		return -EIO;
+	}
+
+	/* Timeouts occur when the device isn't connected, so they're
+	 * "normal" -- don't fill the kernel log with these */
+	if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
+		DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
+		return -ETIMEDOUT;
+	}
+
+	/* Unload any bytes sent back from the other side */
+	recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >>
+		      DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
+	if (recv_bytes > recv_size)
+		recv_bytes = recv_size;
+	
+	for (i = 0; i < recv_bytes; i += 4)
+		unpack_aux(REG_READ(ch_data + i),
+			   recv + i, recv_bytes - i);
+
+	return recv_bytes;
+}
+
+/* Write data to the aux channel in native mode */
+static int
+psb_intel_dp_aux_native_write(struct psb_intel_output *output,
+			  uint16_t address, uint8_t *send, int send_bytes)
+{
+	int ret;
+	uint8_t	msg[20];
+	int msg_bytes;
+	uint8_t	ack;
+
+	if (send_bytes > 16)
+		return -1;
+	msg[0] = AUX_NATIVE_WRITE << 4;
+	msg[1] = address >> 8;
+	msg[2] = address & 0xff;
+	msg[3] = send_bytes - 1;
+	memcpy(&msg[4], send, send_bytes);
+	msg_bytes = send_bytes + 4;
+	for (;;) {
+		ret = psb_intel_dp_aux_ch(output, msg, msg_bytes, &ack, 1);
+		if (ret < 0)
+			return ret;
+		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
+			break;
+		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+			udelay(100);
+		else
+			return -EIO;
+	}
+	return send_bytes;
+}
+
+/* Write a single byte to the aux channel in native mode */
+static int
+psb_intel_dp_aux_native_write_1(struct psb_intel_output *output,
+			    uint16_t address, uint8_t byte)
+{
+	return psb_intel_dp_aux_native_write(output, address, &byte, 1);
+}
+
+/* read bytes from a native aux channel */
+static int
+psb_intel_dp_aux_native_read(struct psb_intel_output *output,
+			 uint16_t address, uint8_t *recv, int recv_bytes)
+{
+	uint8_t msg[4];
+	int msg_bytes;
+	uint8_t reply[20];
+	int reply_bytes;
+	uint8_t ack;
+	int ret;
+
+	msg[0] = AUX_NATIVE_READ << 4;
+	msg[1] = address >> 8;
+	msg[2] = address & 0xff;
+	msg[3] = recv_bytes - 1;
+
+	msg_bytes = 4;
+	reply_bytes = recv_bytes + 1;
+
+	for (;;) {
+		ret = psb_intel_dp_aux_ch(output, msg, msg_bytes,
+				      reply, reply_bytes);
+		if (ret == 0)
+			return -EPROTO;
+		if (ret < 0)
+			return ret;
+		ack = reply[0];
+		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) {
+			memcpy(recv, reply + 1, ret - 1);
+			return ret - 1;
+		}
+		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+			udelay(100);
+		else
+			return -EIO;
+	}
+}
+
+static int
+psb_intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
+		    uint8_t write_byte, uint8_t *read_byte)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	struct psb_intel_dp *intel_dp = container_of(adapter,
+						struct psb_intel_dp,
+						adapter);
+	struct psb_intel_output *output = intel_dp->output;
+	uint16_t address = algo_data->address;
+	uint8_t msg[5];
+	uint8_t reply[2];
+	unsigned retry;
+	int msg_bytes;
+	int reply_bytes;
+	int ret;
+
+	/* Set up the command byte */
+	if (mode & MODE_I2C_READ)
+		msg[0] = AUX_I2C_READ << 4;
+	else
+		msg[0] = AUX_I2C_WRITE << 4;
+
+	if (!(mode & MODE_I2C_STOP))
+		msg[0] |= AUX_I2C_MOT << 4;
+
+	msg[1] = address >> 8;
+	msg[2] = address;
+
+	switch (mode) {
+	case MODE_I2C_WRITE:
+		msg[3] = 0;
+		msg[4] = write_byte;
+		msg_bytes = 5;
+		reply_bytes = 1;
+		break;
+	case MODE_I2C_READ:
+		msg[3] = 0;
+		msg_bytes = 4;
+		reply_bytes = 2;
+		break;
+	default:
+		msg_bytes = 3;
+		reply_bytes = 1;
+		break;
+	}
+
+	for (retry = 0; retry < 5; retry++) {
+		ret = psb_intel_dp_aux_ch(output,
+				      msg, msg_bytes,
+				      reply, reply_bytes);
+		if (ret < 0) {
+			DRM_DEBUG_KMS("aux_ch failed %d\n", ret);
+			return ret;
+		}
+
+		switch (reply[0] & AUX_NATIVE_REPLY_MASK) {
+		case AUX_NATIVE_REPLY_ACK:
+			/* I2C-over-AUX Reply field is only valid
+			 * when paired with AUX ACK.
+			 */
+			break;
+		case AUX_NATIVE_REPLY_NACK:
+			DRM_DEBUG_KMS("aux_ch native nack\n");
+			return -EREMOTEIO;
+		case AUX_NATIVE_REPLY_DEFER:
+			udelay(100);
+			continue;
+		default:
+			DRM_ERROR("aux_ch invalid native reply 0x%02x\n",
+				  reply[0]);
+			return -EREMOTEIO;
+		}
+
+		switch (reply[0] & AUX_I2C_REPLY_MASK) {
+		case AUX_I2C_REPLY_ACK:
+			if (mode == MODE_I2C_READ) {
+				*read_byte = reply[1];
+			}
+			return reply_bytes - 1;
+		case AUX_I2C_REPLY_NACK:
+			DRM_DEBUG_KMS("aux_i2c nack\n");
+			return -EREMOTEIO;
+		case AUX_I2C_REPLY_DEFER:
+			DRM_DEBUG_KMS("aux_i2c defer\n");
+			udelay(100);
+			break;
+		default:
+			DRM_ERROR("aux_i2c invalid reply 0x%02x\n", reply[0]);
+			return -EREMOTEIO;
+		}
+	}
+
+	DRM_ERROR("too many retries, giving up\n");
+	return -EREMOTEIO;
+}
+
+static int
+psb_intel_dp_i2c_init(struct psb_intel_output *output, const char *name)
+{
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	DRM_DEBUG_KMS("i2c_init %s\n", name);
+	intel_dp->algo.running = false;
+	intel_dp->algo.address = 0;
+	intel_dp->algo.aux_ch = psb_intel_dp_i2c_aux_ch;
+
+	memset(&intel_dp->adapter, '\0', sizeof (intel_dp->adapter));
+	intel_dp->adapter.owner = THIS_MODULE;
+	intel_dp->adapter.class = I2C_CLASS_DDC;
+	strncpy (intel_dp->adapter.name, name, sizeof(intel_dp->adapter.name) - 1);
+	intel_dp->adapter.name[sizeof(intel_dp->adapter.name) - 1] = '\0';
+	intel_dp->adapter.algo_data = &intel_dp->algo;
+	intel_dp->adapter.dev.parent = &output->base.kdev;
+
+	return i2c_dp_aux_add_bus(&intel_dp->adapter);
+}
+
+static bool
+psb_intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		    struct drm_display_mode *adjusted_mode)
+{
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	int lane_count, clock;
+	int max_lane_count = psb_intel_dp_max_lane_count(output);
+	int max_clock = psb_intel_dp_max_link_bw(output) == DP_LINK_BW_2_7 ? 1 : 0;
+	static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
+
+
+	for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
+		for (clock = max_clock; clock >= 0; clock--) {
+			int link_avail = psb_intel_dp_max_data_rate(psb_intel_dp_link_clock(bws[clock]), lane_count);
+
+			if (psb_intel_dp_link_required(mode->clock, 24)
+					<= link_avail) {
+				intel_dp->link_bw = bws[clock];
+				intel_dp->lane_count = lane_count;
+				adjusted_mode->clock = psb_intel_dp_link_clock(intel_dp->link_bw);
+				DRM_DEBUG_KMS("Display port link bw %02x lane "
+						"count %d clock %d\n",
+				       intel_dp->link_bw, intel_dp->lane_count,
+				       adjusted_mode->clock);
+				return true;
+			}
+		}
+	}
+
+	return false;
+}
+
+struct psb_intel_dp_m_n {
+	uint32_t	tu;
+	uint32_t	gmch_m;
+	uint32_t	gmch_n;
+	uint32_t	link_m;
+	uint32_t	link_n;
+};
+
+static void
+psb_intel_reduce_ratio(uint32_t *num, uint32_t *den)
+{
+	/*
+	while (*num > 0xffffff || *den > 0xffffff) {
+		*num >>= 1;
+		*den >>= 1;
+	}*/
+	uint64_t value, m;
+	m = *num;
+	value = m * (0x800000);
+	m = do_div(value, *den);
+	*num = value;
+	*den = 0x800000;
+}
+
+static void
+psb_intel_dp_compute_m_n(int bpp,
+		     int nlanes,
+		     int pixel_clock,
+		     int link_clock,
+		     struct psb_intel_dp_m_n *m_n)
+{
+	m_n->tu = 64;
+	m_n->gmch_m = (pixel_clock * bpp + 7) >> 3;
+	m_n->gmch_n = link_clock * nlanes;
+	psb_intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
+	m_n->link_m = pixel_clock;
+	m_n->link_n = link_clock;
+	psb_intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
+}
+
+void
+psb_intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+		 struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_encoder *encoder;
+	struct psb_intel_crtc *intel_crtc = to_psb_intel_crtc(crtc);
+	int lane_count = 4, bpp = 24;
+	struct psb_intel_dp_m_n m_n;
+	int pipe = intel_crtc->pipe;
+
+	/*
+	 * Find the lane count in the intel_encoder private
+	 */
+	list_for_each_entry(encoder, &mode_config->encoder_list, head) {
+		struct psb_intel_output *intel_output;
+		struct psb_intel_dp *intel_dp;
+
+		if (encoder->crtc != crtc)
+			continue;
+
+		intel_output = enc_to_psb_intel_output(encoder);
+		intel_dp = intel_output->dev_priv;
+		if (intel_output->type == INTEL_OUTPUT_DISPLAYPORT) {
+			lane_count = intel_dp->lane_count;
+			break;
+		} else if (is_edp(intel_output)) {
+			lane_count = intel_dp->lane_count;
+			break;
+		}
+	}
+
+	/*
+	 * Compute the GMCH and Link ratios. The '3' here is
+	 * the number of bytes_per_pixel post-LUT, which we always
+	 * set up for 8-bits of R/G/B, or 3 bytes total.
+	 */
+	psb_intel_dp_compute_m_n(bpp, lane_count,
+			     mode->clock, adjusted_mode->clock, &m_n);
+
+	{
+		REG_WRITE(PIPE_GMCH_DATA_M(pipe),
+			   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+			   m_n.gmch_m);
+		REG_WRITE(PIPE_GMCH_DATA_N(pipe), m_n.gmch_n);
+		REG_WRITE(PIPE_DP_LINK_M(pipe), m_n.link_m);
+		REG_WRITE(PIPE_DP_LINK_N(pipe), m_n.link_n);
+	}
+}
+
+static void
+psb_intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		  struct drm_display_mode *adjusted_mode)
+{
+	struct psb_intel_output *intel_output = enc_to_psb_intel_output(encoder);
+	struct drm_crtc *crtc = encoder->crtc;
+	struct psb_intel_crtc *intel_crtc = to_psb_intel_crtc(crtc);
+	struct psb_intel_dp *intel_dp = intel_output->dev_priv;
+
+
+	intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
+	intel_dp->DP |= intel_dp->color_range;
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		intel_dp->DP |= DP_SYNC_HS_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		intel_dp->DP |= DP_SYNC_VS_HIGH;
+
+	intel_dp->DP |= DP_LINK_TRAIN_OFF;
+
+	switch (intel_dp->lane_count) {
+	case 1:
+		intel_dp->DP |= DP_PORT_WIDTH_1;
+		break;
+	case 2:
+		intel_dp->DP |= DP_PORT_WIDTH_2;
+		break;
+	case 4:
+		intel_dp->DP |= DP_PORT_WIDTH_4;
+		break;
+	}
+	if (intel_dp->has_audio)
+		intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
+
+	memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
+	intel_dp->link_configuration[0] = intel_dp->link_bw;
+	intel_dp->link_configuration[1] = intel_dp->lane_count;
+
+	/*
+	 * Check for DPCD version > 1.1 and enhanced framing support
+	 */
+	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
+	    (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
+		intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+		intel_dp->DP |= DP_ENHANCED_FRAMING;
+	}
+
+	/* CPT DP's pipe select is decided in TRANS_DP_CTL */
+	if (intel_crtc->pipe == 1)
+		intel_dp->DP |= DP_PIPEB_SELECT;
+
+	DRM_DEBUG_KMS("DP expected reg is %x\n", intel_dp->DP);
+}
+
+
+/* If the sink supports it, try to set the power state appropriately */
+static void psb_intel_dp_sink_dpms(struct psb_intel_output *output, int mode)
+{
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	int ret, i;
+
+	/* Should have a valid DPCD by this point */
+	if (intel_dp->dpcd[DP_DPCD_REV] < 0x11)
+		return;
+
+	if (mode != DRM_MODE_DPMS_ON) {
+		ret = psb_intel_dp_aux_native_write_1(output, DP_SET_POWER,
+						  DP_SET_POWER_D3);
+		if (ret != 1)
+			DRM_DEBUG_DRIVER("failed to write sink power state\n");
+	} else {
+		/*
+		 * When turning on, we need to retry for 1ms to give the sink
+		 * time to wake up.
+		 */
+		for (i = 0; i < 3; i++) {
+			ret = psb_intel_dp_aux_native_write_1(output,
+							  DP_SET_POWER,
+							  DP_SET_POWER_D0);
+			if (ret == 1)
+				break;
+			udelay(1000);
+		}
+	}
+}
+
+static void psb_intel_dp_prepare(struct drm_encoder *encoder)
+{
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+
+	/* Wake up the sink first */
+	psb_intel_dp_sink_dpms(output, DRM_MODE_DPMS_ON);
+
+	psb_intel_dp_link_down(output);
+}
+
+static void psb_intel_dp_commit(struct drm_encoder *encoder)
+{
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+
+	psb_intel_dp_start_link_train(output);
+
+	psb_intel_dp_complete_link_train(output);
+
+}
+
+static void
+psb_intel_dp_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct psb_intel_output *intel_output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_dp *intel_dp = intel_output->dev_priv;
+	struct drm_device *dev = encoder->dev;
+	uint32_t dp_reg = REG_READ(intel_dp->output_reg);
+
+	if (mode != DRM_MODE_DPMS_ON) {
+		psb_intel_dp_sink_dpms(intel_output, mode);
+		psb_intel_dp_link_down(intel_output);
+	} else {
+		psb_intel_dp_sink_dpms(intel_output, mode);
+		if (!(dp_reg & DP_PORT_EN)) {
+			psb_intel_dp_start_link_train(intel_output);
+			psb_intel_dp_complete_link_train(intel_output);
+		}
+	}
+}
+
+/*
+ * Native read with retry for link status and receiver capability reads for
+ * cases where the sink may still be asleep.
+ */
+static bool
+psb_intel_dp_aux_native_read_retry(struct psb_intel_output *output, uint16_t address,
+			       uint8_t *recv, int recv_bytes)
+{
+	int ret, i;
+
+	/*
+	 * Sinks are *supposed* to come up within 1ms from an off state,
+	 * but we're also supposed to retry 3 times per the spec.
+	 */
+	for (i = 0; i < 3; i++) {
+		ret = psb_intel_dp_aux_native_read(output, address, recv,
+					       recv_bytes);
+		if (ret == recv_bytes)
+			return true;
+		udelay(1000);
+	}
+
+	return false;
+}
+
+/*
+ * Fetch AUX CH registers 0x202 - 0x207 which contain
+ * link status information
+ */
+static bool
+psb_intel_dp_get_link_status(struct psb_intel_output *output)
+{
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	return psb_intel_dp_aux_native_read_retry(output,
+					      DP_LANE0_1_STATUS,
+					      intel_dp->link_status,
+					      DP_LINK_STATUS_SIZE);
+}
+
+static uint8_t
+psb_intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+		     int r)
+{
+	return link_status[r - DP_LANE0_1_STATUS];
+}
+
+static uint8_t
+psb_intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE],
+				 int lane)
+{
+	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+	int	    s = ((lane & 1) ?
+			 DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
+			 DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
+	uint8_t l = psb_intel_dp_link_status(link_status, i);
+
+	return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
+}
+
+static uint8_t
+psb_intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE],
+				      int lane)
+{
+	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+	int	    s = ((lane & 1) ?
+			 DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
+			 DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
+	uint8_t l = psb_intel_dp_link_status(link_status, i);
+
+	return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
+}
+
+
+#if 0
+static char	*voltage_names[] = {
+	"0.4V", "0.6V", "0.8V", "1.2V"
+};
+static char	*pre_emph_names[] = {
+	"0dB", "3.5dB", "6dB", "9.5dB"
+};
+static char	*link_train_names[] = {
+	"pattern 1", "pattern 2", "idle", "off"
+};
+#endif
+
+#define CDV_DP_VOLTAGE_MAX	    DP_TRAIN_VOLTAGE_SWING_1200
+/*
+static uint8_t
+psb_intel_dp_pre_emphasis_max(uint8_t voltage_swing)
+{
+	switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+	case DP_TRAIN_VOLTAGE_SWING_400:
+		return DP_TRAIN_PRE_EMPHASIS_6;
+	case DP_TRAIN_VOLTAGE_SWING_600:
+		return DP_TRAIN_PRE_EMPHASIS_6;
+	case DP_TRAIN_VOLTAGE_SWING_800:
+		return DP_TRAIN_PRE_EMPHASIS_3_5;
+	case DP_TRAIN_VOLTAGE_SWING_1200:
+	default:
+		return DP_TRAIN_PRE_EMPHASIS_0;
+	}
+}
+*/
+static void
+psb_intel_get_adjust_train(struct psb_intel_output *output)
+{
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	uint8_t v = 0;
+	uint8_t p = 0;
+	int lane;
+
+	for (lane = 0; lane < intel_dp->lane_count; lane++) {
+		uint8_t this_v = psb_intel_get_adjust_request_voltage(intel_dp->link_status, lane);
+		uint8_t this_p = psb_intel_get_adjust_request_pre_emphasis(intel_dp->link_status, lane);
+
+		if (this_v > v)
+			v = this_v;
+		if (this_p > p)
+			p = this_p;
+	}
+	
+	if (v >= CDV_DP_VOLTAGE_MAX)
+		v = CDV_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
+
+	if (p == DP_TRAIN_PRE_EMPHASIS_MASK)
+		p |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+		
+	for (lane = 0; lane < 4; lane++)
+		intel_dp->train_set[lane] = v | p;
+}
+
+
+static uint8_t
+psb_intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+		      int lane)
+{
+	int i = DP_LANE0_1_STATUS + (lane >> 1);
+	int s = (lane & 1) * 4;
+	uint8_t l = psb_intel_dp_link_status(link_status, i);
+
+	return (l >> s) & 0xf;
+}
+
+/* Check for clock recovery is done on all channels */
+static bool
+psb_intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+	int lane;
+	uint8_t lane_status;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = psb_intel_get_lane_status(link_status, lane);
+		if ((lane_status & DP_LANE_CR_DONE) == 0)
+			return false;
+	}
+	return true;
+}
+
+/* Check to see if channel eq is done on all channels */
+#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\
+			 DP_LANE_CHANNEL_EQ_DONE|\
+			 DP_LANE_SYMBOL_LOCKED)
+static bool
+psb_intel_channel_eq_ok(struct psb_intel_output *output)
+{
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	uint8_t lane_align;
+	uint8_t lane_status;
+	int lane;
+
+	lane_align = psb_intel_dp_link_status(intel_dp->link_status,
+					  DP_LANE_ALIGN_STATUS_UPDATED);
+	if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
+		return false;
+	for (lane = 0; lane < intel_dp->lane_count; lane++) {
+		lane_status = psb_intel_get_lane_status(intel_dp->link_status, lane);
+		if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
+			return false;
+	}
+	return true;
+}
+
+static bool
+psb_intel_dp_set_link_train(struct psb_intel_output *output,
+			uint32_t dp_reg_value,
+			uint8_t dp_train_pat)
+{
+	
+	struct drm_device *dev = output->base.dev;
+	int ret;
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+
+	REG_WRITE(intel_dp->output_reg, dp_reg_value);
+	REG_READ(intel_dp->output_reg);
+
+	ret = psb_intel_dp_aux_native_write_1(output,
+				    DP_TRAINING_PATTERN_SET,
+				    dp_train_pat);
+
+	if (ret != 1) {
+		DRM_DEBUG_KMS("Failure in setting link pattern %x\n",
+				dp_train_pat);
+		return false;
+	}
+
+	return true;
+}
+
+
+static bool
+psb_intel_dplink_set_level(struct psb_intel_output *output,
+			uint8_t dp_train_pat)
+{
+	
+	int ret;
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+
+	ret = psb_intel_dp_aux_native_write(output,
+					DP_TRAINING_LANE0_SET,
+					intel_dp->train_set,
+					intel_dp->lane_count);
+
+	if (ret != intel_dp->lane_count) {
+		DRM_DEBUG_KMS("Failure in setting level %d, lane_cnt= %d\n",
+				intel_dp->train_set[0], intel_dp->lane_count);
+		return false;
+	}
+	return true;
+}
+
+static void
+psb_intel_dp_set_vswing_premph(struct psb_intel_output *output, uint8_t signal_level)
+{
+	struct drm_device *dev = output->base.dev;
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	struct ddi_regoff *ddi_reg;
+	int vswing, premph, index;
+
+	if (intel_dp->output_reg == DP_B)
+		ddi_reg = &ddi_DP_train_table[0];
+	else
+		ddi_reg = &ddi_DP_train_table[1];
+
+	vswing = (signal_level & DP_TRAIN_VOLTAGE_SWING_MASK);
+	premph = ((signal_level & DP_TRAIN_PRE_EMPHASIS_MASK)) >>
+				DP_TRAIN_PRE_EMPHASIS_SHIFT;
+
+	if (vswing + premph > 3)
+		return;
+#ifdef CDV_FAST_LINK_TRAIN
+	return;
+#endif
+	DRM_DEBUG_KMS("Test2\n");
+	//return ;
+	psb_sb_reset(dev);
+	/* ;Swing voltage programming
+        ;gfx_dpio_set_reg(0xc058, 0x0505313A) */
+	psb_sb_write(dev, ddi_reg->VSwing5, 0x0505313A);
+
+	/* ;gfx_dpio_set_reg(0x8154, 0x43406055) */
+	psb_sb_write(dev, ddi_reg->VSwing1, 0x43406055);
+
+	/* ;gfx_dpio_set_reg(0x8148, 0x55338954)
+	 * The VSwing_PreEmph table is also considered based on the vswing/premp
+	 */
+	index = (vswing + premph) * 2;
+	if (premph == 1 && vswing == 1) {
+		psb_sb_write(dev, ddi_reg->VSwing2, 0x055738954);
+	} else
+		psb_sb_write(dev, ddi_reg->VSwing2, dp_vswing_premph_table[index]);
+
+	/* ;gfx_dpio_set_reg(0x814c, 0x40802040) */
+	if ((vswing + premph) == DP_TRAIN_VOLTAGE_SWING_1200)
+		psb_sb_write(dev, ddi_reg->VSwing3, 0x70802040);
+	else
+		psb_sb_write(dev, ddi_reg->VSwing3, 0x40802040);
+
+	/* ;gfx_dpio_set_reg(0x8150, 0x2b405555) */
+	//psb_sb_write(dev, ddi_reg->VSwing4, 0x2b405555);
+
+	/* ;gfx_dpio_set_reg(0x8154, 0xc3406055) */
+	psb_sb_write(dev, ddi_reg->VSwing1, 0xc3406055);
+
+	/* ;Pre emphasis programming
+	 * ;gfx_dpio_set_reg(0xc02c, 0x1f030040)
+	 */
+	psb_sb_write(dev, ddi_reg->PreEmph1, 0x1f030040);
+
+	/* ;gfx_dpio_set_reg(0x8124, 0x00004000) */
+	index = 2 * premph + 1;
+	psb_sb_write(dev, ddi_reg->PreEmph2, dp_vswing_premph_table[index]);
+	return;	
+}
+
+
+/* Enable corresponding port and start training pattern 1 */
+static void
+psb_intel_dp_start_link_train(struct psb_intel_output *output)
+{
+	struct drm_device *dev = output->base.dev;
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	int i;
+	uint8_t voltage;
+	bool clock_recovery = false;
+	int tries;
+	u32 reg;
+	uint32_t DP = intel_dp->DP;
+
+	DP |= DP_PORT_EN;
+		DP &= ~DP_LINK_TRAIN_MASK;
+		
+		reg = DP;	
+		reg |= DP_LINK_TRAIN_PAT_1;
+	/* Enable output, wait for it to become active */
+	REG_WRITE(intel_dp->output_reg, reg);
+	REG_READ(intel_dp->output_reg);
+	psb_intel_wait_for_vblank(dev);
+
+	DRM_DEBUG_KMS("Link config\n");
+	/* Write the link configuration data */
+	psb_intel_dp_aux_native_write(output, DP_LINK_BW_SET,
+				  intel_dp->link_configuration,
+				  2);
+
+	memset(intel_dp->train_set, 0, 4);
+	voltage = 0;
+	tries = 0;
+	clock_recovery = false;
+
+	DRM_DEBUG_KMS("Start train\n");
+		reg = DP | DP_LINK_TRAIN_PAT_1;
+
+
+	for (;;) {
+		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
+
+		if (!psb_intel_dp_set_link_train(output, reg, DP_TRAINING_PATTERN_1)) {
+			DRM_DEBUG_KMS("Failure in aux-transfer setting pattern 1\n");
+		}
+		psb_intel_dp_set_vswing_premph(output, intel_dp->train_set[0]);
+		/* Set training pattern 1 */
+
+		psb_intel_dplink_set_level(output, DP_TRAINING_PATTERN_1);
+
+		udelay(200);
+		if (!psb_intel_dp_get_link_status(output))
+			break;
+
+		if (psb_intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
+			DRM_DEBUG_KMS("PT1 train is done\n");
+			clock_recovery = true;
+			break;
+		}
+
+		/* Check to see if we've tried the max voltage */
+		for (i = 0; i < intel_dp->lane_count; i++)
+			if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
+				break;
+		if (i == intel_dp->lane_count)
+			break;
+
+		/* Check to see if we've tried the same voltage 5 times */
+		if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
+			++tries;
+			if (tries == 5)
+				break;
+		} else
+			tries = 0;
+		voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+
+		/* Compute new intel_dp->train_set as requested by target */
+		psb_intel_get_adjust_train(output);
+
+	}
+
+	if (!clock_recovery) {
+		DRM_DEBUG_KMS("failure in DP patter 1 training, train set %x\n", intel_dp->train_set[0]);
+	}
+	
+	intel_dp->DP = DP;
+}
+
+static void
+psb_intel_dp_complete_link_train(struct psb_intel_output *output)
+{
+	struct drm_device *dev = output->base.dev;
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	bool channel_eq = false;
+	int tries, cr_tries;
+	u32 reg;
+	uint32_t DP = intel_dp->DP;
+
+	/* channel equalization */
+	tries = 0;
+	cr_tries = 0;
+	channel_eq = false;
+
+	DRM_DEBUG_KMS("\n");
+		reg = DP | DP_LINK_TRAIN_PAT_2;
+
+	for (;;) {
+		/* channel eq pattern */
+		if (!psb_intel_dp_set_link_train(output, reg,
+					     DP_TRAINING_PATTERN_2)) {
+			DRM_DEBUG_KMS("Failure in aux-transfer setting pattern 2\n");
+		}
+		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
+
+		if (cr_tries > 5) {
+			DRM_ERROR("failed to train DP, aborting\n");
+			psb_intel_dp_link_down(output);
+			break;
+		}
+
+		psb_intel_dp_set_vswing_premph(output, intel_dp->train_set[0]);
+
+		psb_intel_dplink_set_level(output, DP_TRAINING_PATTERN_2);
+
+		udelay(1000);
+		if (!psb_intel_dp_get_link_status(output))
+			break;
+
+		/* Make sure clock is still ok */
+		if (!psb_intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
+			psb_intel_dp_start_link_train(output);
+			cr_tries++;
+			continue;
+		}
+
+		if (psb_intel_channel_eq_ok(output)) {
+			DRM_DEBUG_KMS("PT2 train is done\n");
+			channel_eq = true;
+			break;
+		}
+
+		/* Try 5 times, then try clock recovery if that fails */
+		if (tries > 5) {
+			psb_intel_dp_link_down(output);
+			psb_intel_dp_start_link_train(output);
+			tries = 0;
+			cr_tries++;
+			continue;
+		}
+
+		/* Compute new intel_dp->train_set as requested by target */
+		psb_intel_get_adjust_train(output);
+		++tries;
+
+	}
+
+	reg = DP | DP_LINK_TRAIN_OFF;
+
+	REG_WRITE(intel_dp->output_reg, reg);
+	REG_READ(intel_dp->output_reg);
+	psb_intel_dp_aux_native_write_1(output,
+				    DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE);
+}
+
+static void
+psb_intel_dp_link_down(struct psb_intel_output *output)
+{
+	struct drm_device *dev = output->base.dev;
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	uint32_t DP = intel_dp->DP;
+
+	if ((REG_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)
+		return;
+
+	DRM_DEBUG_KMS("\n");
+
+
+	{
+		DP &= ~DP_LINK_TRAIN_MASK;
+		REG_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE);
+	}
+	REG_READ(intel_dp->output_reg);
+
+	msleep(17);
+
+	REG_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
+	REG_READ(intel_dp->output_reg);
+}
+
+static enum drm_connector_status
+cdv_dp_detect(struct psb_intel_output *output)
+{
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	enum drm_connector_status status;
+
+	status = connector_status_disconnected;
+	if (psb_intel_dp_aux_native_read(output, 0x000, intel_dp->dpcd,
+				     sizeof (intel_dp->dpcd)) == sizeof (intel_dp->dpcd))
+	{
+		if (intel_dp->dpcd[DP_DPCD_REV] != 0)
+			status = connector_status_connected;
+	}
+	if (status == connector_status_connected)
+		DRM_DEBUG_KMS("DPCD: Rev=%x LN_Rate=%x LN_CNT=%x LN_DOWNSP=%x\n",
+			intel_dp->dpcd[0], intel_dp->dpcd[1],
+			intel_dp->dpcd[2], intel_dp->dpcd[3]);
+	return status;
+}
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
+ *
+ * \return true if DP port is connected.
+ * \return false if DP port is disconnected.
+ */
+static enum drm_connector_status
+psb_intel_dp_detect(struct drm_connector *connector, bool force)
+{
+	struct psb_intel_output *output = to_psb_intel_output(connector);
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	enum drm_connector_status status;
+	struct edid *edid = NULL;
+
+	intel_dp->has_audio = false;
+
+	status = cdv_dp_detect(output);
+	if (status != connector_status_connected)
+		return status;
+
+	if (intel_dp->force_audio) {
+		intel_dp->has_audio = intel_dp->force_audio > 0;
+	} else {
+		edid = drm_get_edid(connector, &intel_dp->adapter);
+		if (edid) {
+			intel_dp->has_audio = drm_detect_monitor_audio(edid);
+			connector->display_info.raw_edid = NULL;
+			kfree(edid);
+		}
+	}
+
+	return connector_status_connected;
+}
+
+static int psb_intel_dp_get_modes(struct drm_connector *connector)
+{
+	struct psb_intel_output *intel_output = to_psb_intel_output(connector);
+	struct psb_intel_dp *intel_dp = intel_output->dev_priv;
+	struct edid *edid = NULL;
+	int ret = 0;
+
+
+	edid = drm_get_edid(&intel_output->base,
+			 	&intel_dp->adapter);
+	if (edid) {
+		drm_mode_connector_update_edid_property(&intel_output->
+							base, edid);
+		ret = drm_add_edid_modes(&intel_output->base, edid);
+		kfree(edid);
+	}
+
+	return ret;
+}
+
+static bool
+psb_intel_dp_detect_audio(struct drm_connector *connector)
+{
+	struct psb_intel_output *output = to_psb_intel_output(connector);
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	struct edid *edid;
+	bool has_audio = false;
+
+	edid = drm_get_edid(connector, &intel_dp->adapter);
+	if (edid) {
+		has_audio = drm_detect_monitor_audio(edid);
+
+		connector->display_info.raw_edid = NULL;
+		kfree(edid);
+	}
+
+	return has_audio;
+}
+
+static int
+psb_intel_dp_set_property(struct drm_connector *connector,
+		      struct drm_property *property,
+		      uint64_t val)
+{
+	struct drm_psb_private *dev_priv = connector->dev->dev_private;
+	struct psb_intel_output *output = to_psb_intel_output(connector);
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+	int ret;
+
+	ret = drm_connector_property_set_value(connector, property, val);
+	if (ret)
+		return ret;
+
+	if (property == dev_priv->force_audio_property) {
+		int i = val;
+		bool has_audio;
+
+		if (i == intel_dp->force_audio)
+			return 0;
+
+		intel_dp->force_audio = i;
+
+		if (i == 0)
+			has_audio = psb_intel_dp_detect_audio(connector);
+		else
+			has_audio = i > 0;
+
+		if (has_audio == intel_dp->has_audio)
+			return 0;
+
+		intel_dp->has_audio = has_audio;
+		goto done;
+	}
+
+	if (property == dev_priv->broadcast_rgb_property) {
+		if (val == !!intel_dp->color_range)
+			return 0;
+
+		intel_dp->color_range = val ? DP_COLOR_RANGE_16_235 : 0;
+		goto done;
+	}
+
+	return -EINVAL;
+
+done:
+	if (output->enc.crtc) {
+		struct drm_crtc *crtc = output->enc.crtc;
+		drm_crtc_helper_set_mode(crtc, &crtc->mode,
+					 crtc->x, crtc->y,
+					 crtc->fb);
+	}
+
+	return 0;
+}
+
+static void
+psb_intel_dp_destroy (struct drm_connector *connector)
+{
+	struct psb_intel_output *output = to_psb_intel_output(connector);
+	struct psb_intel_dp *intel_dp = output->dev_priv;
+
+	i2c_del_adapter(&intel_dp->adapter);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static void psb_intel_dp_encoder_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_helper_funcs psb_intel_dp_helper_funcs = {
+	.dpms = psb_intel_dp_dpms,
+	.mode_fixup = psb_intel_dp_mode_fixup,
+	.prepare = psb_intel_dp_prepare,
+	.mode_set = psb_intel_dp_mode_set,
+	.commit = psb_intel_dp_commit,
+};
+
+static const struct drm_connector_funcs psb_intel_dp_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = psb_intel_dp_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = psb_intel_dp_set_property,
+	.destroy = psb_intel_dp_destroy,
+};
+
+static const struct drm_connector_helper_funcs psb_intel_dp_connector_helper_funcs = {
+	.get_modes = psb_intel_dp_get_modes,
+	.mode_valid = psb_intel_dp_mode_valid,
+	.best_encoder = psb_intel_best_encoder,
+};
+
+static const struct drm_encoder_funcs psb_intel_dp_enc_funcs = {
+	.destroy = psb_intel_dp_encoder_destroy,
+};
+
+
+static void
+psb_intel_dp_add_properties(struct psb_intel_output *output, struct drm_connector *connector)
+{
+	psb_intel_attach_force_audio_property(connector);
+	psb_intel_attach_broadcast_rgb_property(connector);
+}
+
+void
+psb_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev, int output_reg)
+{
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct psb_intel_output *psb_intel_output;
+	struct psb_intel_dp *intel_dp;
+	const char *name = NULL;
+	int type;
+
+	psb_intel_output = kzalloc(sizeof(struct psb_intel_output) +
+			       sizeof(struct psb_intel_dp), GFP_KERNEL);
+	if (!psb_intel_output)
+		return;
+
+	intel_dp = (struct psb_intel_dp *)(psb_intel_output + 1);
+	psb_intel_output->mode_dev = mode_dev;
+	connector = &psb_intel_output->base;
+	encoder = &psb_intel_output->enc;
+	psb_intel_output->dev_priv=intel_dp;
+	intel_dp->output = psb_intel_output;
+
+	intel_dp->output_reg = output_reg;
+	
+	type = DRM_MODE_CONNECTOR_DisplayPort;
+	psb_intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+
+	drm_connector_init(dev, connector, &psb_intel_dp_connector_funcs, type);
+	drm_connector_helper_add(connector, &psb_intel_dp_connector_helper_funcs);
+
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+	connector->interlace_allowed = 0;
+	connector->doublescan_allowed = 0;
+
+	drm_encoder_init(dev, encoder, &psb_intel_dp_enc_funcs,
+			 DRM_MODE_ENCODER_TMDS);
+	drm_encoder_helper_add(encoder, &psb_intel_dp_helper_funcs);
+
+	drm_mode_connector_attach_encoder(&psb_intel_output->base,
+					  &psb_intel_output->enc);
+
+	drm_sysfs_connector_add(connector);
+
+	/* Set up the DDC bus. */
+	switch (output_reg) {
+		case DP_B:
+			name = "DPDDC-B";
+			psb_intel_output->ddi_select = (DP_MASK | DDI0_SELECT);
+			break;
+		case DP_C:
+			name = "DPDDC-C";
+			psb_intel_output->ddi_select = (DP_MASK | DDI1_SELECT);
+			break;
+	}
+
+	psb_intel_dp_i2c_init(psb_intel_output, name);
+	psb_intel_dp_add_properties(psb_intel_output, connector);
+
+}
diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h
index 7b357b0..73214e2 100644
--- a/drivers/gpu/drm/gma500/psb_intel_drv.h
+++ b/drivers/gpu/drm/gma500/psb_intel_drv.h
@@ -29,10 +29,6 @@
  * Display related stuff
  */
 
-/* store information about an Ixxx DVO */
-/* The i830->i865 use multiple DVOs with multiple i2cs */
-/* the i915, i945 have a single sDVO i2c bus - which is different */
-#define MAX_OUTPUTS 6
 /* maximum connectors per crtcs in the mode set */
 #define INTELFB_CONN_LIMIT 4
 
@@ -69,6 +65,8 @@
 #define INTEL_OUTPUT_HDMI 6
 #define INTEL_OUTPUT_MIPI 7
 #define INTEL_OUTPUT_MIPI2 8
+#define INTEL_OUTPUT_DISPLAYPORT 9
+#define INTEL_OUTPUT_EDP 10
 
 #define INTEL_DVO_CHIP_NONE 0
 #define INTEL_DVO_CHIP_LVDS 1
diff --git a/drivers/gpu/drm/gma500/psb_intel_reg.h b/drivers/gpu/drm/gma500/psb_intel_reg.h
index 8e8c8ef..d3091fc 100644
--- a/drivers/gpu/drm/gma500/psb_intel_reg.h
+++ b/drivers/gpu/drm/gma500/psb_intel_reg.h
@@ -1347,5 +1347,160 @@ No status bits are changed.
 #define LANE_PLL_ENABLE		(0x3 << 20)
 #define LANE_PLL_PIPE(p)	(((p) == 0) ? (1 << 21) : (0 << 21))
 
+#define DP_B				0x64100
+#define DP_C				0x64200
+
+#define   DP_PORT_EN			(1 << 31)
+#define   DP_PIPEB_SELECT		(1 << 30)
+#define   DP_PIPE_MASK			(1 << 30)
+
+/* Link training mode - select a suitable mode for each stage */
+#define   DP_LINK_TRAIN_PAT_1		(0 << 28)
+#define   DP_LINK_TRAIN_PAT_2		(1 << 28)
+#define   DP_LINK_TRAIN_PAT_IDLE	(2 << 28)
+#define   DP_LINK_TRAIN_OFF		(3 << 28)
+#define   DP_LINK_TRAIN_MASK		(3 << 28)
+#define   DP_LINK_TRAIN_SHIFT		28
+
+/* Signal voltages. These are mostly controlled by the other end */
+#define   DP_VOLTAGE_0_4		(0 << 25)
+#define   DP_VOLTAGE_0_6		(1 << 25)
+#define   DP_VOLTAGE_0_8		(2 << 25)
+#define   DP_VOLTAGE_1_2		(3 << 25)
+#define   DP_VOLTAGE_MASK		(7 << 25)
+#define   DP_VOLTAGE_SHIFT		25
+
+/* Signal pre-emphasis levels, like voltages, the other end tells us what
+ * they want
+ */
+#define   DP_PRE_EMPHASIS_0		(0 << 22)
+#define   DP_PRE_EMPHASIS_3_5		(1 << 22)
+#define   DP_PRE_EMPHASIS_6		(2 << 22)
+#define   DP_PRE_EMPHASIS_9_5		(3 << 22)
+#define   DP_PRE_EMPHASIS_MASK		(7 << 22)
+#define   DP_PRE_EMPHASIS_SHIFT		22
+
+/* How many wires to use. I guess 3 was too hard */
+#define   DP_PORT_WIDTH_1		(0 << 19)
+#define   DP_PORT_WIDTH_2		(1 << 19)
+#define   DP_PORT_WIDTH_4		(3 << 19)
+#define   DP_PORT_WIDTH_MASK		(7 << 19)
+
+/* Mystic DPCD version 1.1 special mode */
+#define   DP_ENHANCED_FRAMING		(1 << 18)
+
+/** locked once port is enabled */
+#define   DP_PORT_REVERSAL		(1 << 15)
+
+/** sends the clock on lane 15 of the PEG for debug */
+#define   DP_CLOCK_OUTPUT_ENABLE	(1 << 13)
+
+#define   DP_SCRAMBLING_DISABLE		(1 << 12)
+#define   DP_SCRAMBLING_DISABLE_IRONLAKE	(1 << 7)
+
+/** limit RGB values to avoid confusing TVs */
+#define   DP_COLOR_RANGE_16_235		(1 << 8)
+
+/** Turn on the audio link */
+#define   DP_AUDIO_OUTPUT_ENABLE	(1 << 6)
+
+/** vs and hs sync polarity */
+#define   DP_SYNC_VS_HIGH		(1 << 4)
+#define   DP_SYNC_HS_HIGH		(1 << 3)
+
+/** A fantasy */
+#define   DP_DETECTED			(1 << 2)
+
+/** The aux channel provides a way to talk to the
+ * signal sink for DDC etc. Max packet size supported
+ * is 20 bytes in each direction, hence the 5 fixed
+ * data registers
+ */
+#define DPB_AUX_CH_CTL			0x64110
+#define DPB_AUX_CH_DATA1		0x64114
+#define DPB_AUX_CH_DATA2		0x64118
+#define DPB_AUX_CH_DATA3		0x6411c
+#define DPB_AUX_CH_DATA4		0x64120
+#define DPB_AUX_CH_DATA5		0x64124
+
+#define DPC_AUX_CH_CTL			0x64210
+#define DPC_AUX_CH_DATA1		0x64214
+#define DPC_AUX_CH_DATA2		0x64218
+#define DPC_AUX_CH_DATA3		0x6421c
+#define DPC_AUX_CH_DATA4		0x64220
+#define DPC_AUX_CH_DATA5		0x64224
+
+#define   DP_AUX_CH_CTL_SEND_BUSY	    (1 << 31)
+#define   DP_AUX_CH_CTL_DONE		    (1 << 30)
+#define   DP_AUX_CH_CTL_INTERRUPT	    (1 << 29)
+#define   DP_AUX_CH_CTL_TIME_OUT_ERROR	    (1 << 28)
+#define   DP_AUX_CH_CTL_TIME_OUT_400us	    (0 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_600us	    (1 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_800us	    (2 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_1600us	    (3 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_MASK	    (3 << 26)
+#define   DP_AUX_CH_CTL_RECEIVE_ERROR	    (1 << 25)
+#define   DP_AUX_CH_CTL_MESSAGE_SIZE_MASK    (0x1f << 20)
+#define   DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT   20
+#define   DP_AUX_CH_CTL_PRECHARGE_2US_MASK   (0xf << 16)
+#define   DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT  16
+#define   DP_AUX_CH_CTL_AUX_AKSV_SELECT	    (1 << 15)
+#define   DP_AUX_CH_CTL_MANCHESTER_TEST	    (1 << 14)
+#define   DP_AUX_CH_CTL_SYNC_TEST	    (1 << 13)
+#define   DP_AUX_CH_CTL_DEGLITCH_TEST	    (1 << 12)
+#define   DP_AUX_CH_CTL_PRECHARGE_TEST	    (1 << 11)
+#define   DP_AUX_CH_CTL_BIT_CLOCK_2X_MASK    (0x7ff)
+#define   DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT   0
+
+/*
+ * Computing GMCH M and N values for the Display Port link
+ *
+ * GMCH M/N = dot clock * bytes per pixel / ls_clk * # of lanes
+ *
+ * ls_clk (we assume) is the DP link clock (1.62 or 2.7 GHz)
+ *
+ * The GMCH value is used internally
+ *
+ * bytes_per_pixel is the number of bytes coming out of the plane,
+ * which is after the LUTs, so we want the bytes for our color format.
+ * For our current usage, this is always 3, one byte for R, G and B.
+ */
+
+#define _PIPEA_GMCH_DATA_M			0x70050
+#define _PIPEB_GMCH_DATA_M			0x71050
+
+/* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */
+#define   PIPE_GMCH_DATA_M_TU_SIZE_MASK		(0x3f << 25)
+#define   PIPE_GMCH_DATA_M_TU_SIZE_SHIFT	25
+
+#define   PIPE_GMCH_DATA_M_MASK			(0xffffff)
+
+#define _PIPEA_GMCH_DATA_N			0x70054
+#define _PIPEB_GMCH_DATA_N			0x71054
+#define   PIPE_GMCH_DATA_N_MASK			(0xffffff)
+
+/*
+ * Computing Link M and N values for the Display Port link
+ *
+ * Link M / N = pixel_clock / ls_clk
+ *
+ * (the DP spec calls pixel_clock the 'strm_clk')
+ *
+ * The Link value is transmitted in the Main Stream
+ * Attributes and VB-ID.
+ */
+
+#define _PIPEA_DP_LINK_M				0x70060
+#define _PIPEB_DP_LINK_M				0x71060
+#define   PIPEA_DP_LINK_M_MASK			(0xffffff)
+
+#define _PIPEA_DP_LINK_N				0x70064
+#define _PIPEB_DP_LINK_N				0x71064
+#define   PIPEA_DP_LINK_N_MASK			(0xffffff)
+
+#define PIPE_GMCH_DATA_M(pipe) _PIPE(pipe, _PIPEA_GMCH_DATA_M, _PIPEB_GMCH_DATA_M)
+#define PIPE_GMCH_DATA_N(pipe) _PIPE(pipe, _PIPEA_GMCH_DATA_N, _PIPEB_GMCH_DATA_N)
+#define PIPE_DP_LINK_M(pipe) _PIPE(pipe, _PIPEA_DP_LINK_M, _PIPEB_DP_LINK_M)
+#define PIPE_DP_LINK_N(pipe) _PIPE(pipe, _PIPEA_DP_LINK_N, _PIPEB_DP_LINK_N)
 
 #endif
