@@ -9,85 +9,14 @@
#include <asm/machvec.h>
-/*
- * Fixup to mark boot BIOS video selected by BIOS before it changes
- *
- * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
- *
- * The standard boot ROM sequence for an x86 machine uses the BIOS
- * to select an initial video card for boot display. This boot video
- * card will have it's BIOS copied to C0000 in system RAM.
- * IORESOURCE_ROM_SHADOW is used to associate the boot video
- * card with this copy. On laptops this copy has to be used since
- * the main ROM may be compressed or combined with another image.
- * See pci_map_rom() for use of this flag. Before marking the device
- * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set
- * by either arch cde or vga-arbitration, if so only apply the fixup to this
- * already determined primary video card.
- */
-
-static void pci_fixup_video(struct pci_dev *pdev)
+static void pci_ia64_fixup_video(struct pci_dev *pdev)
{
- struct pci_dev *bridge;
- struct pci_bus *bus;
- u16 config;
-
if ((strcmp(ia64_platform_name, "dig") != 0)
&& (strcmp(ia64_platform_name, "hpzx1") != 0))
return;
/* Maybe, this machine supports legacy memory map. */
- if (!vga_default_device()) {
- resource_size_t start, end;
- int i;
-
- /* Does firmware framebuffer belong to us? */
- for (i=0; i < DEVICE_COUNT_RESOURCE; i++) {
- if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM))
- continue;
-
- start = pci_resource_start(pdev, i);
- end = pci_resource_end(pdev, i);
-
- if (!start || !end)
- continue;
-
- if (screen_info.lfb_base >= start &&
- (screen_info.lfb_base + screen_info.lfb_size) < end)
- vga_set_default_device(pdev);
- }
- }
-
- /* Is VGA routed to us? */
- bus = pdev->bus;
- while (bus) {
- bridge = bus->self;
-
- /*
- * From information provided by
- * "David Miller" <davem@davemloft.net>
- * The bridge control register is valid for PCI header
- * type BRIDGE, or CARDBUS. Host to PCI controllers use
- * PCI header type NORMAL.
- */
- if (bridge
- &&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- ||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) {
- pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
- &config);
- if (!(config & PCI_BRIDGE_CTL_VGA))
- return;
- }
- bus = bus->parent;
- }
- if (!vga_default_device() || pdev == vga_default_device()) {
- pci_read_config_word(pdev, PCI_COMMAND, &config);
- if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
- pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
- dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
- vga_set_default_device(pdev);
- }
- }
+ pci_fixup_video(pdev);
}
DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video);
+ PCI_CLASS_DISPLAY_VGA, 8, pci_ia64_fixup_video);
@@ -302,81 +302,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_r
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk);
-/*
- * Fixup to mark boot BIOS video selected by BIOS before it changes
- *
- * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
- *
- * The standard boot ROM sequence for an x86 machine uses the BIOS
- * to select an initial video card for boot display. This boot video
- * card will have it's BIOS copied to C0000 in system RAM.
- * IORESOURCE_ROM_SHADOW is used to associate the boot video
- * card with this copy. On laptops this copy has to be used since
- * the main ROM may be compressed or combined with another image.
- * See pci_map_rom() for use of this flag. Before marking the device
- * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set
- * by either arch cde or vga-arbitration, if so only apply the fixup to this
- * already determined primary video card.
- */
-
-static void pci_fixup_video(struct pci_dev *pdev)
-{
- struct pci_dev *bridge;
- struct pci_bus *bus;
- u16 config;
-
- if (!vga_default_device()) {
- resource_size_t start, end;
- int i;
-
- /* Does firmware framebuffer belong to us? */
- for (i=0; i < DEVICE_COUNT_RESOURCE; i++) {
- if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM))
- continue;
-
- start = pci_resource_start(pdev, i);
- end = pci_resource_end(pdev, i);
-
- if (!start || !end)
- continue;
-
- if (screen_info.lfb_base >= start &&
- (screen_info.lfb_base + screen_info.lfb_size) < end)
- vga_set_default_device(pdev);
- }
- }
-
- /* Is VGA routed to us? */
- bus = pdev->bus;
- while (bus) {
- bridge = bus->self;
-
- /*
- * From information provided by
- * "David Miller" <davem@davemloft.net>
- * The bridge control register is valid for PCI header
- * type BRIDGE, or CARDBUS. Host to PCI controllers use
- * PCI header type NORMAL.
- */
- if (bridge
- && ((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- || (bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) {
- pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
- &config);
- if (!(config & PCI_BRIDGE_CTL_VGA))
- return;
- }
- bus = bus->parent;
- }
- if (!vga_default_device() || pdev == vga_default_device()) {
- pci_read_config_word(pdev, PCI_COMMAND, &config);
- if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
- pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
- dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
- vga_set_default_device(pdev);
- }
- }
-}
+/* pci_fixup_video shared in vgaarb.c */
DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video);
@@ -149,6 +149,81 @@ void vga_set_default_device(struct pci_dev *pdev)
}
#endif
+/*
+ * Fixup to mark boot BIOS video selected by BIOS before it changes
+ *
+ * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
+ *
+ * The standard boot ROM sequence for an x86 machine uses the BIOS
+ * to select an initial video card for boot display. This boot video
+ * card will have it's BIOS copied to C0000 in system RAM.
+ * IORESOURCE_ROM_SHADOW is used to associate the boot video
+ * card with this copy. On laptops this copy has to be used since
+ * the main ROM may be compressed or combined with another image.
+ * See pci_map_rom() for use of this flag. Before marking the device
+ * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set
+ * by either arch cde or vga-arbitration, if so only apply the fixup to this
+ * already determined primary video card.
+ */
+
+void pci_fixup_video(struct pci_dev *pdev)
+{
+ struct pci_dev *bridge;
+ struct pci_bus *bus;
+ u16 config;
+
+ if (!vga_default_device()) {
+ resource_size_t start, end;
+ int i;
+
+ for (i=0; i < DEVICE_COUNT_RESOURCE; i++) {
+ if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM))
+ continue;
+
+ start = pci_resource_start(pdev, i);
+ end = pci_resource_end(pdev, i);
+
+ if (!start || !end)
+ continue;
+
+ if (screen_info.lfb_base >= start &&
+ (screen_info.lfb_base + screen_info.lfb_size) < end)
+ vga_set_default_device(pdev);
+ }
+ }
+
+ /* Is VGA routed to us? */
+ bus = pdev->bus;
+ while (bus) {
+ bridge = bus->self;
+
+ /*
+ * From information provided by
+ * "David Miller" <davem@davemloft.net>
+ * The bridge control register is valid for PCI header
+ * type BRIDGE, or CARDBUS. Host to PCI controllers use
+ * PCI header type NORMAL.
+ */
+ if (bridge
+ && ((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ || (bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) {
+ pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
+ &config);
+ if (!(config & PCI_BRIDGE_CTL_VGA))
+ return;
+ }
+ bus = bus->parent;
+ }
+ if (!vga_default_device() || pdev == vga_default_device()) {
+ pci_read_config_word(pdev, PCI_COMMAND, &config);
+ if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
+ pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
+ dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
+ vga_set_default_device(pdev);
+ }
+ }
+}
+
static inline void vga_irq_set_state(struct vga_device *vgadev, bool state)
{
if (vgadev->irq_set_state)
@@ -162,6 +162,43 @@ extern void vga_put(struct pci_dev *pdev, unsigned int rsrc);
#define vga_put(pdev, rsrc)
#endif
+/**
+ * pci_fixup_video
+ *
+ * This can be called by arch PCI to fixup boot VGA tagging
+ * of VGA PCI devices (e.g. for X86, IA64)
+ *
+ * This code was initially spread/duplicated across:
+ * - X86 PCI-fixup
+ * - IA64 PCI-fixup
+ * - EFI_FB
+ *
+ * * PCI-fixup part:
+ * Fixup to mark boot BIOS video selected by BIOS before it changes
+ *
+ * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
+ *
+ * The standard boot ROM sequence for an x86 machine uses the BIOS
+ * to select an initial video card for boot display. This boot video
+ * card will have it's BIOS copied to C0000 in system RAM.
+ * IORESOURCE_ROM_SHADOW is used to associate the boot video
+ * card with this copy. On laptops this copy has to be used since
+ * the main ROM may be compressed or combined with another image.
+ * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
+ * is marked here since the boot video device will be the only enabled
+ * video device at this point.
+ *
+ * * EFI_FB part:
+ * Some EFI-based system (e.g. Intel-Macs from Apple) do not setup
+ * shadow Video-BIOS and thus can only be detected by framebuffer
+ * IO memory range. Flag the corresponding GPU as boot_vga.
+ */
+
+#if defined(CONFIG_VGA_ARB)
+void pci_fixup_video(struct pci_dev *pdev);
+#else
+static inline void pci_fixup_video(struct pci_dev *pdev) { }
+#endif
/**
* vga_default_device