@@ -229,3 +229,11 @@
&uart3 {
label = "LS-UART1";
};
+
+&ade {
+ status = "ok";
+};
+
+&dsi {
+ status = "ok";
+};
@@ -269,6 +269,11 @@
mboxes = <&mailbox 1 0 11>;
};
+ medianoc_ade: medianoc_ade@f4520000 {
+ compatible = "syscon";
+ reg = <0x0 0xf4520000 0x0 0x4000>;
+ };
+
uart0: uart@f8015000 { /* console */
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xf8015000 0x0 0x1000>;
@@ -833,5 +838,54 @@
};
};
};
+
+ ade: ade@f4100000 {
+ compatible = "hisilicon,hi6220-ade";
+ reg = <0x0 0xf4100000 0x0 0x7800>;
+ reg-names = "ade_base";
+ hisilicon,noc-syscon = <&medianoc_ade>;
+ resets = <&media_ctrl MEDIA_ADE>;
+ interrupts = <0 115 4>; /* ldi interrupt */
+
+ clocks = <&media_ctrl HI6220_ADE_CORE>,
+ <&media_ctrl HI6220_CODEC_JPEG>,
+ <&media_ctrl HI6220_ADE_PIX_SRC>;
+ /*clock name*/
+ clock-names = "clk_ade_core",
+ "clk_codec_jpeg",
+ "clk_ade_pix";
+
+ assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
+ <&media_ctrl HI6220_CODEC_JPEG>;
+ assigned-clock-rates = <360000000>, <288000000>;
+ status = "disabled";
+
+ port {
+ ade_out: endpoint {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+ };
+
+ dsi: dsi@f4107800 {
+ compatible = "hisilicon,hi6220-dsi";
+ reg = <0x0 0xf4107800 0x0 0x100>;
+ clocks = <&media_ctrl HI6220_DSI_PCLK>;
+ clock-names = "pclk";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 0 for input port */
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&ade_out>;
+ };
+ };
+ };
+ };
};
};
Add ade and dsi DT nodes for hikey board. The binding docs were acked by Rob Herring in this thread: https://lists.freedesktop.org/archives/dri-devel/2016-March/102135.html Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 8 ++++ arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 54 ++++++++++++++++++++++++++ 2 files changed, 62 insertions(+)