| Message ID | 20160906144620.6322-3-maxime.ripard@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Sep 6, 2016 at 10:46 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > The A33 has a significantly different pipeline, with components that differ > too. > > Make sure we had compatible for them. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> > --- > Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 7 ++++++- > drivers/gpu/drm/sun4i/sun4i_backend.c | 1 + > drivers/gpu/drm/sun4i/sun4i_drv.c | 8 +++++--- > drivers/gpu/drm/sun4i/sun4i_tcon.c | 8 +++++++- > 4 files changed, 19 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > index df8f4aeefe4c..bd3136a5cba5 100644 > --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > @@ -26,7 +26,9 @@ TCON > The TCON acts as a timing controller for RGB, LVDS and TV interfaces. > > Required properties: > - - compatible: value should be "allwinner,sun5i-a13-tcon". > + - compatible: value must be either: > + * allwinner,sun5i-a13-tcon > + * allwinner,sun8i-a33-tcon > - reg: base address and size of memory-mapped region > - interrupts: interrupt associated to this IP > - clocks: phandles to the clocks feeding the TCON. Three are needed: > @@ -59,6 +61,7 @@ system. > Required properties: > - compatible: value must be one of: > * allwinner,sun5i-a13-display-backend > + * allwinner,sun8i-a33-display-backend > - reg: base address and size of the memory-mapped region. > - clocks: phandles to the clocks feeding the frontend and backend > * ahb: the backend interface clock > @@ -80,6 +83,7 @@ deinterlacing and color space conversion. > Required properties: > - compatible: value must be one of: > * allwinner,sun5i-a13-display-frontend > + * allwinner,sun8i-a33-display-frontend > - reg: base address and size of the memory-mapped region. > - interrupts: interrupt associated to this IP > - clocks: phandles to the clocks feeding the frontend and backend > @@ -104,6 +108,7 @@ extra node. > Required properties: > - compatible: value must be one of: > * allwinner,sun5i-a13-display-engine > + * allwinner,sun8i-a33-display-engine > > - allwinner,pipelines: list of phandle to the display engine > frontends available. > diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c > index 3ab560450a82..9bfd2e45fceb 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_backend.c > +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c > @@ -345,6 +345,7 @@ static int sun4i_backend_remove(struct platform_device *pdev) > > static const struct of_device_id sun4i_backend_of_table[] = { > { .compatible = "allwinner,sun5i-a13-display-backend" }, > + { .compatible = "allwinner,sun8i-a33-display-backend" }, > { } > }; > MODULE_DEVICE_TABLE(of, sun4i_backend_of_table); > diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c > index 942f62e2441c..c4d03c1b6db8 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_drv.c > +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c > @@ -199,13 +199,14 @@ static const struct component_master_ops sun4i_drv_master_ops = { > > static bool sun4i_drv_node_is_frontend(struct device_node *node) > { > - return of_device_is_compatible(node, > - "allwinner,sun5i-a13-display-frontend"); > + return of_device_is_compatible(node, "allwinner,sun5i-a13-display-frontend") || > + of_device_is_compatible(node, "allwinner,sun8i-a33-display-frontend"); > } > > static bool sun4i_drv_node_is_tcon(struct device_node *node) > { > - return of_device_is_compatible(node, "allwinner,sun5i-a13-tcon"); > + return of_device_is_compatible(node, "allwinner,sun5i-a13-tcon") || > + of_device_is_compatible(node, "allwinner,sun8i-a33-tcon"); > } The list is going to grow to about 6 entries or so... I wonder if there is a better way. :( > static int compare_of(struct device *dev, void *data) > @@ -320,6 +321,7 @@ static int sun4i_drv_remove(struct platform_device *pdev) > > static const struct of_device_id sun4i_drv_of_table[] = { > { .compatible = "allwinner,sun5i-a13-display-engine" }, > + { .compatible = "allwinner,sun8i-a33-display-engine" }, > { } > }; > MODULE_DEVICE_TABLE(of, sun4i_drv_of_table); > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c > index fde6af1230d2..cadacb517f95 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > @@ -488,8 +488,13 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, > tcon->drm = drm; > tcon->dev = dev; > > - if (of_device_is_compatible(dev->of_node, "allwinner,sun5i-a13-tcon")) > + if (of_device_is_compatible(dev->of_node, "allwinner,sun5i-a13-tcon")) { > tcon->has_mux = true; > + tcon->has_channel_1 = true; > + } else { > + tcon->has_mux = false; > + tcon->has_channel_1 = false; > + } > > tcon->lcd_rst = devm_reset_control_get(dev, "lcd"); > if (IS_ERR(tcon->lcd_rst)) { > @@ -585,6 +590,7 @@ static int sun4i_tcon_remove(struct platform_device *pdev) > > static const struct of_device_id sun4i_tcon_of_table[] = { > { .compatible = "allwinner,sun5i-a13-tcon" }, > + { .compatible = "allwinner,sun8i-a33-tcon" }, > { } > }; > MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table); > -- > 2.9.3 >
On Tue, Sep 6, 2016 at 10:46 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > The A33 has a significantly different pipeline, with components that differ > too. > > Make sure we had compatible for them. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 7 ++++++- > drivers/gpu/drm/sun4i/sun4i_backend.c | 1 + > drivers/gpu/drm/sun4i/sun4i_drv.c | 8 +++++--- > drivers/gpu/drm/sun4i/sun4i_tcon.c | 8 +++++++- > 4 files changed, 19 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > index df8f4aeefe4c..bd3136a5cba5 100644 > --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > @@ -26,7 +26,9 @@ TCON > The TCON acts as a timing controller for RGB, LVDS and TV interfaces. > > Required properties: > - - compatible: value should be "allwinner,sun5i-a13-tcon". > + - compatible: value must be either: > + * allwinner,sun5i-a13-tcon > + * allwinner,sun8i-a33-tcon > - reg: base address and size of memory-mapped region > - interrupts: interrupt associated to this IP > - clocks: phandles to the clocks feeding the TCON. Three are needed: You should probably put a note saying the A33 only needs 2 clocks. You can keep my ack after fixing it. ChenYu
On Tue, Sep 06, 2016 at 11:16:33PM +0800, Chen-Yu Tsai wrote: > On Tue, Sep 6, 2016 at 10:46 PM, Maxime Ripard > <maxime.ripard@free-electrons.com> wrote: > > The A33 has a significantly different pipeline, with components that differ > > too. > > > > Make sure we had compatible for them. > > > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > > --- > > Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 7 ++++++- > > drivers/gpu/drm/sun4i/sun4i_backend.c | 1 + > > drivers/gpu/drm/sun4i/sun4i_drv.c | 8 +++++--- > > drivers/gpu/drm/sun4i/sun4i_tcon.c | 8 +++++++- > > 4 files changed, 19 insertions(+), 5 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > > index df8f4aeefe4c..bd3136a5cba5 100644 > > --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > > +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > > @@ -26,7 +26,9 @@ TCON > > The TCON acts as a timing controller for RGB, LVDS and TV interfaces. > > > > Required properties: > > - - compatible: value should be "allwinner,sun5i-a13-tcon". > > + - compatible: value must be either: > > + * allwinner,sun5i-a13-tcon > > + * allwinner,sun8i-a33-tcon > > - reg: base address and size of memory-mapped region > > - interrupts: interrupt associated to this IP > > - clocks: phandles to the clocks feeding the TCON. Three are needed: > > You should probably put a note saying the A33 only needs 2 clocks. > You can keep my ack after fixing it. I did while applying, thanks! Maxime
Hi, On Tue, Sep 6, 2016 at 10:46 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > The A33 has a significantly different pipeline, with components that differ > too. > > Make sure we had compatible for them. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 7 ++++++- > drivers/gpu/drm/sun4i/sun4i_backend.c | 1 + > drivers/gpu/drm/sun4i/sun4i_drv.c | 8 +++++--- > drivers/gpu/drm/sun4i/sun4i_tcon.c | 8 +++++++- > 4 files changed, 19 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > index df8f4aeefe4c..bd3136a5cba5 100644 > --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > @@ -26,7 +26,9 @@ TCON > The TCON acts as a timing controller for RGB, LVDS and TV interfaces. > > Required properties: > - - compatible: value should be "allwinner,sun5i-a13-tcon". > + - compatible: value must be either: > + * allwinner,sun5i-a13-tcon > + * allwinner,sun8i-a33-tcon > - reg: base address and size of memory-mapped region > - interrupts: interrupt associated to this IP > - clocks: phandles to the clocks feeding the TCON. Three are needed: > @@ -59,6 +61,7 @@ system. > Required properties: > - compatible: value must be one of: > * allwinner,sun5i-a13-display-backend > + * allwinner,sun8i-a33-display-backend > - reg: base address and size of the memory-mapped region. > - clocks: phandles to the clocks feeding the frontend and backend > * ahb: the backend interface clock > @@ -80,6 +83,7 @@ deinterlacing and color space conversion. > Required properties: > - compatible: value must be one of: > * allwinner,sun5i-a13-display-frontend > + * allwinner,sun8i-a33-display-frontend I just looked at the A23. It seems it's the same display frontend as the A33. Should we change the compatible string to a23 while it's still in RC? The backend is probably different. The A33 only claims to support 2048x2048 layers, while the A23 claims to support 8192x8192 layers. Regards ChenYu > - reg: base address and size of the memory-mapped region. > - interrupts: interrupt associated to this IP > - clocks: phandles to the clocks feeding the frontend and backend > @@ -104,6 +108,7 @@ extra node. > Required properties: > - compatible: value must be one of: > * allwinner,sun5i-a13-display-engine > + * allwinner,sun8i-a33-display-engine > > - allwinner,pipelines: list of phandle to the display engine > frontends available. > diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c > index 3ab560450a82..9bfd2e45fceb 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_backend.c > +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c > @@ -345,6 +345,7 @@ static int sun4i_backend_remove(struct platform_device *pdev) > > static const struct of_device_id sun4i_backend_of_table[] = { > { .compatible = "allwinner,sun5i-a13-display-backend" }, > + { .compatible = "allwinner,sun8i-a33-display-backend" }, > { } > }; > MODULE_DEVICE_TABLE(of, sun4i_backend_of_table); > diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c > index 942f62e2441c..c4d03c1b6db8 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_drv.c > +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c > @@ -199,13 +199,14 @@ static const struct component_master_ops sun4i_drv_master_ops = { > > static bool sun4i_drv_node_is_frontend(struct device_node *node) > { > - return of_device_is_compatible(node, > - "allwinner,sun5i-a13-display-frontend"); > + return of_device_is_compatible(node, "allwinner,sun5i-a13-display-frontend") || > + of_device_is_compatible(node, "allwinner,sun8i-a33-display-frontend"); > } > > static bool sun4i_drv_node_is_tcon(struct device_node *node) > { > - return of_device_is_compatible(node, "allwinner,sun5i-a13-tcon"); > + return of_device_is_compatible(node, "allwinner,sun5i-a13-tcon") || > + of_device_is_compatible(node, "allwinner,sun8i-a33-tcon"); > } > > static int compare_of(struct device *dev, void *data) > @@ -320,6 +321,7 @@ static int sun4i_drv_remove(struct platform_device *pdev) > > static const struct of_device_id sun4i_drv_of_table[] = { > { .compatible = "allwinner,sun5i-a13-display-engine" }, > + { .compatible = "allwinner,sun8i-a33-display-engine" }, > { } > }; > MODULE_DEVICE_TABLE(of, sun4i_drv_of_table); > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c > index fde6af1230d2..cadacb517f95 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > @@ -488,8 +488,13 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, > tcon->drm = drm; > tcon->dev = dev; > > - if (of_device_is_compatible(dev->of_node, "allwinner,sun5i-a13-tcon")) > + if (of_device_is_compatible(dev->of_node, "allwinner,sun5i-a13-tcon")) { > tcon->has_mux = true; > + tcon->has_channel_1 = true; > + } else { > + tcon->has_mux = false; > + tcon->has_channel_1 = false; > + } > > tcon->lcd_rst = devm_reset_control_get(dev, "lcd"); > if (IS_ERR(tcon->lcd_rst)) { > @@ -585,6 +590,7 @@ static int sun4i_tcon_remove(struct platform_device *pdev) > > static const struct of_device_id sun4i_tcon_of_table[] = { > { .compatible = "allwinner,sun5i-a13-tcon" }, > + { .compatible = "allwinner,sun8i-a33-tcon" }, > { } > }; > MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table); > -- > 2.9.3 >
On Sat, Nov 05, 2016 at 11:54:28PM +0800, Chen-Yu Tsai wrote: > Hi, > > On Tue, Sep 6, 2016 at 10:46 PM, Maxime Ripard > <maxime.ripard@free-electrons.com> wrote: > > The A33 has a significantly different pipeline, with components that differ > > too. > > > > Make sure we had compatible for them. > > > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > > --- > > Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 7 ++++++- > > drivers/gpu/drm/sun4i/sun4i_backend.c | 1 + > > drivers/gpu/drm/sun4i/sun4i_drv.c | 8 +++++--- > > drivers/gpu/drm/sun4i/sun4i_tcon.c | 8 +++++++- > > 4 files changed, 19 insertions(+), 5 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > > index df8f4aeefe4c..bd3136a5cba5 100644 > > --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > > +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > > @@ -26,7 +26,9 @@ TCON > > The TCON acts as a timing controller for RGB, LVDS and TV interfaces. > > > > Required properties: > > - - compatible: value should be "allwinner,sun5i-a13-tcon". > > + - compatible: value must be either: > > + * allwinner,sun5i-a13-tcon > > + * allwinner,sun8i-a33-tcon > > - reg: base address and size of memory-mapped region > > - interrupts: interrupt associated to this IP > > - clocks: phandles to the clocks feeding the TCON. Three are needed: > > @@ -59,6 +61,7 @@ system. > > Required properties: > > - compatible: value must be one of: > > * allwinner,sun5i-a13-display-backend > > + * allwinner,sun8i-a33-display-backend > > - reg: base address and size of the memory-mapped region. > > - clocks: phandles to the clocks feeding the frontend and backend > > * ahb: the backend interface clock > > @@ -80,6 +83,7 @@ deinterlacing and color space conversion. > > Required properties: > > - compatible: value must be one of: > > * allwinner,sun5i-a13-display-frontend > > + * allwinner,sun8i-a33-display-frontend > > I just looked at the A23. It seems it's the same display frontend as the A33. > Should we change the compatible string to a23 while it's still in RC? > > The backend is probably different. The A33 only claims to support 2048x2048 > layers, while the A23 claims to support 8192x8192 layers. I think we can still keep it. Especially if we're not sure, we might need to make use of it in the future. Maxime
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index df8f4aeefe4c..bd3136a5cba5 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -26,7 +26,9 @@ TCON The TCON acts as a timing controller for RGB, LVDS and TV interfaces. Required properties: - - compatible: value should be "allwinner,sun5i-a13-tcon". + - compatible: value must be either: + * allwinner,sun5i-a13-tcon + * allwinner,sun8i-a33-tcon - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the TCON. Three are needed: @@ -59,6 +61,7 @@ system. Required properties: - compatible: value must be one of: * allwinner,sun5i-a13-display-backend + * allwinner,sun8i-a33-display-backend - reg: base address and size of the memory-mapped region. - clocks: phandles to the clocks feeding the frontend and backend * ahb: the backend interface clock @@ -80,6 +83,7 @@ deinterlacing and color space conversion. Required properties: - compatible: value must be one of: * allwinner,sun5i-a13-display-frontend + * allwinner,sun8i-a33-display-frontend - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the frontend and backend @@ -104,6 +108,7 @@ extra node. Required properties: - compatible: value must be one of: * allwinner,sun5i-a13-display-engine + * allwinner,sun8i-a33-display-engine - allwinner,pipelines: list of phandle to the display engine frontends available. diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c index 3ab560450a82..9bfd2e45fceb 100644 --- a/drivers/gpu/drm/sun4i/sun4i_backend.c +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c @@ -345,6 +345,7 @@ static int sun4i_backend_remove(struct platform_device *pdev) static const struct of_device_id sun4i_backend_of_table[] = { { .compatible = "allwinner,sun5i-a13-display-backend" }, + { .compatible = "allwinner,sun8i-a33-display-backend" }, { } }; MODULE_DEVICE_TABLE(of, sun4i_backend_of_table); diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index 942f62e2441c..c4d03c1b6db8 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -199,13 +199,14 @@ static const struct component_master_ops sun4i_drv_master_ops = { static bool sun4i_drv_node_is_frontend(struct device_node *node) { - return of_device_is_compatible(node, - "allwinner,sun5i-a13-display-frontend"); + return of_device_is_compatible(node, "allwinner,sun5i-a13-display-frontend") || + of_device_is_compatible(node, "allwinner,sun8i-a33-display-frontend"); } static bool sun4i_drv_node_is_tcon(struct device_node *node) { - return of_device_is_compatible(node, "allwinner,sun5i-a13-tcon"); + return of_device_is_compatible(node, "allwinner,sun5i-a13-tcon") || + of_device_is_compatible(node, "allwinner,sun8i-a33-tcon"); } static int compare_of(struct device *dev, void *data) @@ -320,6 +321,7 @@ static int sun4i_drv_remove(struct platform_device *pdev) static const struct of_device_id sun4i_drv_of_table[] = { { .compatible = "allwinner,sun5i-a13-display-engine" }, + { .compatible = "allwinner,sun8i-a33-display-engine" }, { } }; MODULE_DEVICE_TABLE(of, sun4i_drv_of_table); diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index fde6af1230d2..cadacb517f95 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -488,8 +488,13 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, tcon->drm = drm; tcon->dev = dev; - if (of_device_is_compatible(dev->of_node, "allwinner,sun5i-a13-tcon")) + if (of_device_is_compatible(dev->of_node, "allwinner,sun5i-a13-tcon")) { tcon->has_mux = true; + tcon->has_channel_1 = true; + } else { + tcon->has_mux = false; + tcon->has_channel_1 = false; + } tcon->lcd_rst = devm_reset_control_get(dev, "lcd"); if (IS_ERR(tcon->lcd_rst)) { @@ -585,6 +590,7 @@ static int sun4i_tcon_remove(struct platform_device *pdev) static const struct of_device_id sun4i_tcon_of_table[] = { { .compatible = "allwinner,sun5i-a13-tcon" }, + { .compatible = "allwinner,sun8i-a33-tcon" }, { } }; MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table);
The A33 has a significantly different pipeline, with components that differ too. Make sure we had compatible for them. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 7 ++++++- drivers/gpu/drm/sun4i/sun4i_backend.c | 1 + drivers/gpu/drm/sun4i/sun4i_drv.c | 8 +++++--- drivers/gpu/drm/sun4i/sun4i_tcon.c | 8 +++++++- 4 files changed, 19 insertions(+), 5 deletions(-)