diff mbox

[v3,2/4] ARM: sun5i: a13-olinuxino: Enable VGA bridge

Message ID 20160908121751.16911-3-maxime.ripard@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Maxime Ripard Sept. 8, 2016, 12:17 p.m. UTC 
Now that we have support for the VGA bridges using our DRM driver, enable
the display engine for the Olimex A13-Olinuxino.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 60 +++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

Comments

Chen-Yu Tsai Sept. 9, 2016, 12:36 p.m. UTC | #1 
On Thu, Sep 8, 2016 at 8:17 PM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> Now that we have support for the VGA bridges using our DRM driver, enable
> the display engine for the Olimex A13-Olinuxino.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Assuming the bridge bindings are good,

Acked-by: Chen-Yu Tsai <wens@csie.org>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index b3c234c65ea1..1cc7ff361f49 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -72,6 +72,53 @@ 
 			default-state = "on";
 		};
 	};
+
+	bridge {
+		compatible = "rgb-to-vga-bridge";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				vga_bridge_in: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				vga_bridge_out: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
 };
 
 &ehci0 {
@@ -211,6 +258,19 @@ 
 	status = "okay";
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_bridge_in>;
+	};
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins_b>;