@@ -1,20 +1,20 @@
* Freescale MXS LCD Interface (LCDIF)
Required properties:
-- compatible: Should be "fsl,<chip>-lcdif". Supported chips include
- imx23 and imx28.
-- reg: Address and length of the register set for lcdif
-- interrupts: Should contain lcdif interrupts
-- display : phandle to display node (see below for details)
+- compatible: Should be "fsl,imx23-lcdif" for i.MX23.
+ Should be "fsl,imx28-lcdif" for i.MX28.
+- reg: Address and length of the register set for lcdif
+- interrupts: Should contain lcdif interrupts
+- display: phandle to display node (see below for details)
* display node
Required properties:
-- bits-per-pixel : <16> for RGB565, <32> for RGB888/666.
-- bus-width : number of data lines. Could be <8>, <16>, <18> or <24>.
+- bits-per-pixel: <16> for RGB565, <32> for RGB888/666.
+- bus-width: number of data lines. Could be <8>, <16>, <18> or <24>.
Required sub-node:
-- display-timings : Refer to binding doc display-timing.txt for details.
+- display-timings: Refer to binding doc display-timing.txt for details.
Examples:
Clean up the ad-hoc indentation in the documentation, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Rob Herring <robh@kernel.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> --- Documentation/devicetree/bindings/display/mxsfb.txt | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)