diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst
index be07e76..bd18734 100644
--- a/Documentation/gpu/drm-kms-helpers.rst
+++ b/Documentation/gpu/drm-kms-helpers.rst
@@ -293,3 +293,15 @@ tinydrm Helper Reference
 
 .. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c
    :export:
+
+MIPI DBI Helper Reference
+-------------------------
+
+.. kernel-doc:: drivers/gpu/drm/tinydrm/mipi-dbi.c
+   :doc: overview
+
+.. kernel-doc:: include/drm/tinydrm/mipi-dbi.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/tinydrm/mipi-dbi.c
+   :export:
diff --git a/drivers/gpu/drm/tinydrm/Kconfig b/drivers/gpu/drm/tinydrm/Kconfig
index ffb873f..128d2f3 100644
--- a/drivers/gpu/drm/tinydrm/Kconfig
+++ b/drivers/gpu/drm/tinydrm/Kconfig
@@ -6,3 +6,6 @@ menuconfig DRM_TINYDRM
 	help
 	  Choose this option if you have a tinydrm supported display.
 	  If M is selected the module will be called tinydrm.
+
+config TINYDRM_MIPI_DBI
+	tristate
diff --git a/drivers/gpu/drm/tinydrm/Makefile b/drivers/gpu/drm/tinydrm/Makefile
index 7476ed1..fe5d4c6 100644
--- a/drivers/gpu/drm/tinydrm/Makefile
+++ b/drivers/gpu/drm/tinydrm/Makefile
@@ -1 +1,4 @@
 obj-$(CONFIG_DRM_TINYDRM)		+= core/
+
+# Controllers
+obj-$(CONFIG_TINYDRM_MIPI_DBI)		+= mipi-dbi.o
diff --git a/drivers/gpu/drm/tinydrm/mipi-dbi.c b/drivers/gpu/drm/tinydrm/mipi-dbi.c
new file mode 100644
index 0000000..5ded299
--- /dev/null
+++ b/drivers/gpu/drm/tinydrm/mipi-dbi.c
@@ -0,0 +1,1005 @@
+/*
+ * MIPI Display Bus Interface (DBI) LCD controller support
+ *
+ * Copyright 2016 Noralf Trønnes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <drm/tinydrm/mipi-dbi.h>
+#include <drm/tinydrm/tinydrm-helpers.h>
+#include <linux/debugfs.h>
+#include <linux/dma-buf.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+#include <video/mipi_display.h>
+
+#define MIPI_DBI_MAX_SPI_READ_SPEED 2000000 /* 2MHz */
+
+#define DCS_POWER_MODE_DISPLAY			BIT(2)
+#define DCS_POWER_MODE_DISPLAY_NORMAL_MODE	BIT(3)
+#define DCS_POWER_MODE_SLEEP_MODE		BIT(4)
+#define DCS_POWER_MODE_PARTIAL_MODE		BIT(5)
+#define DCS_POWER_MODE_IDLE_MODE		BIT(6)
+#define DCS_POWER_MODE_RESERVED_MASK		(BIT(0) | BIT(1) | BIT(7))
+
+/**
+ * DOC: overview
+ *
+ * This library provides helpers for MIPI Display Bus Interface (DBI)
+ * compatible display controllers.
+ *
+ * Many controllers for tiny lcd displays are MIPI compliant and can use this
+ * library. If a controller uses registers 0x2A and 0x2B to set the area to
+ * update and uses register 0x2C to write to frame memory, it is most likely
+ * MIPI compliant.
+ *
+ * Only MIPI Type 1 displays are supported since a full frame memory is needed.
+ *
+ * There are 3 MIPI DBI implementation types:
+ *
+ * A. Motorola 6800 type parallel bus
+ *
+ * B. Intel 8080 type parallel bus
+ *
+ * C. SPI type with 3 options:
+ *
+ *    1. 9-bit with the Data/Command signal as the ninth bit
+ *    2. Same as above except it's sent as 16 bits
+ *    3. 8-bit with the Data/Command signal as a separate D/CX pin
+ *
+ * Currently mipi_dbi only supports Type C options 1 and 3 with
+ * mipi_dbi_spi_init().
+ */
+
+#define MIPI_DBI_DEBUG_COMMAND(cmd, data, len) \
+({ \
+	if (!len) \
+		DRM_DEBUG_DRIVER("cmd=%02x\n", cmd); \
+	else if (len <= 32) \
+		DRM_DEBUG_DRIVER("cmd=%02x, par=%*ph\n", cmd, len, data); \
+	else \
+		DRM_DEBUG_DRIVER("cmd=%02x, len=%zu\n", cmd, len); \
+})
+
+static const u8 mipi_dbi_dcs_read_commands[] = {
+	MIPI_DCS_GET_DISPLAY_ID,
+	MIPI_DCS_GET_RED_CHANNEL,
+	MIPI_DCS_GET_GREEN_CHANNEL,
+	MIPI_DCS_GET_BLUE_CHANNEL,
+	MIPI_DCS_GET_DISPLAY_STATUS,
+	MIPI_DCS_GET_POWER_MODE,
+	MIPI_DCS_GET_ADDRESS_MODE,
+	MIPI_DCS_GET_PIXEL_FORMAT,
+	MIPI_DCS_GET_DISPLAY_MODE,
+	MIPI_DCS_GET_SIGNAL_MODE,
+	MIPI_DCS_GET_DIAGNOSTIC_RESULT,
+	MIPI_DCS_READ_MEMORY_START,
+	MIPI_DCS_READ_MEMORY_CONTINUE,
+	MIPI_DCS_GET_SCANLINE,
+	MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
+	MIPI_DCS_GET_CONTROL_DISPLAY,
+	MIPI_DCS_GET_POWER_SAVE,
+	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS,
+	MIPI_DCS_READ_DDB_START,
+	MIPI_DCS_READ_DDB_CONTINUE,
+	0, /* sentinel */
+};
+
+static bool mipi_dbi_command_is_read(struct mipi_dbi *mipi, u8 cmd)
+{
+	unsigned int i;
+
+	if (!mipi->read_commands)
+		return false;
+
+	for (i = 0; i < 0xff; i++) {
+		if (!mipi->read_commands[i])
+			return false;
+		if (cmd == mipi->read_commands[i])
+			return true;
+	}
+
+	return false;
+}
+
+/**
+ * mipi_dbi_command_read - MIPI DCS read command
+ * @mipi: MIPI structure
+ * @cmd: Command
+ * @val: Value read
+ *
+ * Send MIPI DCS read command to the controller.
+ *
+ * Returns:
+ * Zero on success, negative error code on failure.
+ */
+int mipi_dbi_command_read(struct mipi_dbi *mipi, u8 cmd, u8 *val)
+{
+	if (!mipi->read_commands)
+		return -EACCES;
+
+	if (!mipi_dbi_command_is_read(mipi, cmd))
+		return -EINVAL;
+
+	return mipi_dbi_command_buf(mipi, cmd, val, 1);
+}
+EXPORT_SYMBOL(mipi_dbi_command_read);
+
+/**
+ * mipi_dbi_command_buf - MIPI DCS command with parameter(s) in an array
+ * @mipi: MIPI structure
+ * @cmd: Command
+ * @data: Parameter buffer
+ * @len: Buffer length
+ *
+ * Returns:
+ * Zero on success, negative error code on failure.
+ */
+int mipi_dbi_command_buf(struct mipi_dbi *mipi, u8 cmd, u8 *data, size_t len)
+{
+	int ret;
+
+	mutex_lock(&mipi->cmdlock);
+	ret = mipi->command(mipi, cmd, data, len);
+	mutex_unlock(&mipi->cmdlock);
+
+	return ret;
+}
+EXPORT_SYMBOL(mipi_dbi_command_buf);
+
+static int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb,
+				struct drm_clip_rect *clip, bool swap)
+{
+	struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
+	struct dma_buf_attachment *import_attach = cma_obj->base.import_attach;
+	struct drm_format_name_buf format_name;
+	void *src = cma_obj->vaddr;
+	int ret = 0;
+
+	if (import_attach) {
+		ret = dma_buf_begin_cpu_access(import_attach->dmabuf,
+					       DMA_FROM_DEVICE);
+		if (ret)
+			return ret;
+	}
+
+	switch (fb->format->format) {
+	case DRM_FORMAT_RGB565:
+		if (swap)
+			tinydrm_swab16(dst, src, fb, clip);
+		else
+			tinydrm_memcpy(dst, src, fb, clip);
+		break;
+	case DRM_FORMAT_XRGB8888:
+		tinydrm_xrgb8888_to_rgb565(dst, src, fb, clip, swap);
+		break;
+	default:
+		dev_err_once(fb->dev->dev, "Format is not supported: %s\n",
+			     drm_get_format_name(fb->format->format,
+						 &format_name));
+		return -EINVAL;
+	}
+
+	if (import_attach)
+		ret = dma_buf_end_cpu_access(import_attach->dmabuf,
+					     DMA_FROM_DEVICE);
+	return ret;
+}
+
+static int mipi_dbi_fb_dirty(struct drm_framebuffer *fb,
+			     struct drm_file *file_priv,
+			     unsigned int flags, unsigned int color,
+			     struct drm_clip_rect *clips,
+			     unsigned int num_clips)
+{
+	struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
+	struct tinydrm_device *tdev = fb->dev->dev_private;
+	struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
+	bool swap = mipi->swap_bytes;
+	struct drm_clip_rect clip;
+	int ret = 0;
+	bool full;
+	void *tr;
+
+	mutex_lock(&tdev->dirty_lock);
+
+	if (!mipi->enabled)
+		goto out_unlock;
+
+	/* fbdev can flush even when we're not interested */
+	if (tdev->pipe.plane.fb != fb)
+		goto out_unlock;
+
+	full = tinydrm_merge_clips(&clip, clips, num_clips, flags,
+				   fb->width, fb->height);
+
+	DRM_DEBUG("Flushing [FB:%d] x1=%u, x2=%u, y1=%u, y2=%u\n", fb->base.id,
+		  clip.x1, clip.x2, clip.y1, clip.y2);
+
+	if (!mipi->dc || !full || swap ||
+	    fb->format->format == DRM_FORMAT_XRGB8888) {
+		tr = mipi->tx_buf;
+		ret = mipi_dbi_buf_copy(mipi->tx_buf, fb, &clip, swap);
+		if (ret)
+			goto out_unlock;
+	} else {
+		tr = cma_obj->vaddr;
+	}
+
+	mipi_dbi_command(mipi, MIPI_DCS_SET_COLUMN_ADDRESS,
+			 (clip.x1 >> 8) & 0xFF, clip.x1 & 0xFF,
+			 (clip.x2 >> 8) & 0xFF, (clip.x2 - 1) & 0xFF);
+	mipi_dbi_command(mipi, MIPI_DCS_SET_PAGE_ADDRESS,
+			 (clip.y1 >> 8) & 0xFF, clip.y1 & 0xFF,
+			 (clip.y2 >> 8) & 0xFF, (clip.y2 - 1) & 0xFF);
+
+	ret = mipi_dbi_command_buf(mipi, MIPI_DCS_WRITE_MEMORY_START, tr,
+				(clip.x2 - clip.x1) * (clip.y2 - clip.y1) * 2);
+
+out_unlock:
+	mutex_unlock(&tdev->dirty_lock);
+
+	if (ret)
+		dev_err_once(fb->dev->dev, "Failed to update display %d\n",
+			     ret);
+
+	return ret;
+}
+
+static const struct drm_framebuffer_funcs mipi_dbi_fb_funcs = {
+	.destroy	= drm_fb_cma_destroy,
+	.create_handle	= drm_fb_cma_create_handle,
+	.dirty		= mipi_dbi_fb_dirty,
+};
+
+/**
+ * mipi_dbi_pipe_enable - MIPI DBI pipe enable helper
+ * @pipe: Display pipe
+ * @crtc_state: CRTC state
+ *
+ * This function enables backlight. Drivers can use this as their
+ * &drm_simple_display_pipe_funcs->enable callback.
+ */
+void mipi_dbi_pipe_enable(struct drm_simple_display_pipe *pipe,
+			  struct drm_crtc_state *crtc_state)
+{
+	struct tinydrm_device *tdev = pipe_to_tinydrm(pipe);
+	struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
+	struct drm_framebuffer *fb = pipe->plane.fb;
+
+	DRM_DEBUG_KMS("\n");
+
+	mipi->enabled = true;
+	if (fb)
+		fb->funcs->dirty(fb, NULL, 0, 0, NULL, 0);
+
+	tinydrm_enable_backlight(mipi->backlight);
+}
+EXPORT_SYMBOL(mipi_dbi_pipe_enable);
+
+static void mipi_dbi_blank(struct mipi_dbi *mipi)
+{
+	struct drm_device *drm = mipi->tinydrm.drm;
+	u16 height = drm->mode_config.min_height;
+	u16 width = drm->mode_config.min_width;
+	size_t len = width * height * 2;
+
+	memset(mipi->tx_buf, 0, len);
+
+	mipi_dbi_command(mipi, MIPI_DCS_SET_COLUMN_ADDRESS, 0, 0,
+			 (width >> 8) & 0xFF, (width - 1) & 0xFF);
+	mipi_dbi_command(mipi, MIPI_DCS_SET_PAGE_ADDRESS, 0, 0,
+			 (height >> 8) & 0xFF, (height - 1) & 0xFF);
+	mipi_dbi_command_buf(mipi, MIPI_DCS_WRITE_MEMORY_START,
+			     (u8 *)mipi->tx_buf, len);
+}
+
+/**
+ * mipi_dbi_pipe_disable - MIPI DBI pipe disable helper
+ * @pipe: Display pipe
+ *
+ * This function disables backlight if present or if not the
+ * display memory is blanked. Drivers can use this as their
+ * &drm_simple_display_pipe_funcs->disable callback.
+ */
+void mipi_dbi_pipe_disable(struct drm_simple_display_pipe *pipe)
+{
+	struct tinydrm_device *tdev = pipe_to_tinydrm(pipe);
+	struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
+
+	DRM_DEBUG_KMS("\n");
+
+	mipi->enabled = false;
+
+	if (mipi->backlight)
+		tinydrm_disable_backlight(mipi->backlight);
+	else
+		mipi_dbi_blank(mipi);
+}
+EXPORT_SYMBOL(mipi_dbi_pipe_disable);
+
+static const uint32_t mipi_dbi_formats[] = {
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_XRGB8888,
+};
+
+/**
+ * mipi_dbi_init - MIPI DBI initialization
+ * @dev: Parent device
+ * @mipi: &mipi_dbi structure to initialize
+ * @pipe_funcs: Display pipe functions
+ * @driver: DRM driver
+ * @mode: Display mode
+ * @rotation: Initial rotation in degrees Counter Clock Wise
+ *
+ * This function initializes a &mipi_dbi structure and it's underlying
+ * @tinydrm_device. It also sets up the display pipeline.
+ *
+ * Supported formats: Native RGB565 and emulated XRGB8888.
+ *
+ * Objects created by this function will be automatically freed on driver
+ * detach (devres).
+ *
+ * Returns:
+ * Zero on success, negative error code on failure.
+ */
+int mipi_dbi_init(struct device *dev, struct mipi_dbi *mipi,
+		  const struct drm_simple_display_pipe_funcs *pipe_funcs,
+		  struct drm_driver *driver,
+		  const struct drm_display_mode *mode, unsigned int rotation)
+{
+	size_t bufsize = mode->vdisplay * mode->hdisplay * sizeof(u16);
+	struct tinydrm_device *tdev = &mipi->tinydrm;
+	int ret;
+
+	if (!mipi->command)
+		return -EINVAL;
+
+	mutex_init(&mipi->cmdlock);
+
+	mipi->tx_buf = devm_kmalloc(dev, bufsize, GFP_KERNEL);
+	if (!mipi->tx_buf)
+		return -ENOMEM;
+
+	ret = devm_tinydrm_init(dev, tdev, &mipi_dbi_fb_funcs, driver);
+	if (ret)
+		return ret;
+
+	/* TODO: Maybe add DRM_MODE_CONNECTOR_SPI */
+	ret = tinydrm_display_pipe_init(tdev, pipe_funcs,
+					DRM_MODE_CONNECTOR_VIRTUAL,
+					mipi_dbi_formats,
+					ARRAY_SIZE(mipi_dbi_formats), mode,
+					rotation);
+	if (ret)
+		return ret;
+
+	tdev->drm->mode_config.preferred_depth = 16;
+	mipi->rotation = rotation;
+
+	drm_mode_config_reset(tdev->drm);
+
+	DRM_DEBUG_KMS("preferred_depth=%u, rotation = %u\n",
+		      tdev->drm->mode_config.preferred_depth, rotation);
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dbi_init);
+
+/**
+ * mipi_dbi_hw_reset - Hardware reset of controller
+ * @mipi: MIPI DBI structure
+ *
+ * Reset controller if the &mipi_dbi->reset gpio is set.
+ */
+void mipi_dbi_hw_reset(struct mipi_dbi *mipi)
+{
+	if (!mipi->reset)
+		return;
+
+	gpiod_set_value_cansleep(mipi->reset, 0);
+	msleep(20);
+	gpiod_set_value_cansleep(mipi->reset, 1);
+	msleep(120);
+}
+EXPORT_SYMBOL(mipi_dbi_hw_reset);
+
+/**
+ * mipi_dbi_display_is_on - Check if display is on
+ * @mipi: MIPI DBI structure
+ *
+ * This function checks the Power Mode register (if readable) to see if
+ * display output is turned on. This can be used to see if the bootloader
+ * has already turned on the display avoiding flicker when the pipeline is
+ * enabled.
+ *
+ * Returns:
+ * true if the display can be verified to be on, false otherwise.
+ */
+bool mipi_dbi_display_is_on(struct mipi_dbi *mipi)
+{
+	u8 val;
+
+	if (mipi_dbi_command_read(mipi, MIPI_DCS_GET_POWER_MODE, &val))
+		return false;
+
+	val &= ~DCS_POWER_MODE_RESERVED_MASK;
+
+	if (val != (DCS_POWER_MODE_DISPLAY |
+	    DCS_POWER_MODE_DISPLAY_NORMAL_MODE | DCS_POWER_MODE_SLEEP_MODE))
+		return false;
+
+	DRM_DEBUG_DRIVER("Display is ON\n");
+
+	return true;
+}
+EXPORT_SYMBOL(mipi_dbi_display_is_on);
+
+#ifdef CONFIG_SPI
+
+/*
+ * Many controllers have a max speed of 10MHz, but can be pushed way beyond
+ * that. Increase reliability by running pixel data at max speed and the rest
+ * at 10MHz, preventing transfer glitches from messing up the init settings.
+ */
+static u32 mipi_dbi_spi_cmd_max_speed(struct spi_device *spi, size_t len)
+{
+	if (len > 64)
+		return 0; /* use default */
+
+	return min_t(u32, 10000000, spi->max_speed_hz);
+}
+
+/*
+ * MIPI DBI Type C Option 1
+ *
+ * If the SPI controller doesn't have 9 bits per word support,
+ * use blocks of 9 bytes to send 8x 9-bit words using a 8-bit SPI transfer.
+ * Pad partial blocks with MIPI_DCS_NOP (zero).
+ * This is how the D/C bit (x) is added:
+ *     x7654321
+ *     0x765432
+ *     10x76543
+ *     210x7654
+ *     3210x765
+ *     43210x76
+ *     543210x7
+ *     6543210x
+ *     76543210
+ */
+
+static int mipi_dbi_spi1e_transfer(struct mipi_dbi *mipi, int dc,
+				   const void *buf, size_t len,
+				   unsigned int bpw)
+{
+	bool swap_bytes = (bpw == 16 && tinydrm_machine_little_endian());
+	size_t chunk, max_chunk = mipi->tx_buf9_len;
+	struct spi_device *spi = mipi->spi;
+	struct spi_transfer tr = {
+		.tx_buf = mipi->tx_buf9,
+		.bits_per_word = 8,
+	};
+	struct spi_message m;
+	const u8 *src = buf;
+	int i, ret;
+	u8 *dst;
+
+	if (drm_debug & DRM_UT_DRIVER)
+		pr_debug("[drm:%s] dc=%d, max_chunk=%zu, transfers:\n",
+			 __func__, dc, max_chunk);
+
+	tr.speed_hz = mipi_dbi_spi_cmd_max_speed(spi, len);
+	spi_message_init_with_transfers(&m, &tr, 1);
+
+	if (!dc) {
+		if (WARN_ON_ONCE(len != 1))
+			return -EINVAL;
+
+		/* Command: pad no-op's (zeroes) at beginning of block */
+		dst = mipi->tx_buf9;
+		memset(dst, 0, 9);
+		dst[8] = *src;
+		tr.len = 9;
+
+		tinydrm_dbg_spi_message(spi, &m);
+
+		return spi_sync(spi, &m);
+	}
+
+	/* max with room for adding one bit per byte */
+	max_chunk = max_chunk / 9 * 8;
+	/* but no bigger than len */
+	max_chunk = min(max_chunk, len);
+	/* 8 byte blocks */
+	max_chunk = max_t(size_t, 8, max_chunk & ~0x7);
+
+	while (len) {
+		size_t added = 0;
+
+		chunk = min(len, max_chunk);
+		len -= chunk;
+		dst = mipi->tx_buf9;
+
+		if (chunk < 8) {
+			u8 val, carry = 0;
+
+			/* Data: pad no-op's (zeroes) at end of block */
+			memset(dst, 0, 9);
+
+			if (swap_bytes) {
+				for (i = 1; i < (chunk + 1); i++) {
+					val = src[1];
+					*dst++ = carry | BIT(8 - i) | (val >> i);
+					carry = val << (8 - i);
+					i++;
+					val = src[0];
+					*dst++ = carry | BIT(8 - i) | (val >> i);
+					carry = val << (8 - i);
+					src += 2;
+				}
+				*dst++ = carry;
+			} else {
+				for (i = 1; i < (chunk + 1); i++) {
+					val = *src++;
+					*dst++ = carry | BIT(8 - i) | (val >> i);
+					carry = val << (8 - i);
+				}
+				*dst++ = carry;
+			}
+
+			chunk = 8;
+			added = 1;
+		} else {
+			for (i = 0; i < chunk; i += 8) {
+				if (swap_bytes) {
+					*dst++ =                 BIT(7) | (src[1] >> 1);
+					*dst++ = (src[1] << 7) | BIT(6) | (src[0] >> 2);
+					*dst++ = (src[0] << 6) | BIT(5) | (src[3] >> 3);
+					*dst++ = (src[3] << 5) | BIT(4) | (src[2] >> 4);
+					*dst++ = (src[2] << 4) | BIT(3) | (src[5] >> 5);
+					*dst++ = (src[5] << 3) | BIT(2) | (src[4] >> 6);
+					*dst++ = (src[4] << 2) | BIT(1) | (src[7] >> 7);
+					*dst++ = (src[7] << 1) | BIT(0);
+					*dst++ = src[6];
+				} else {
+					*dst++ =                 BIT(7) | (src[0] >> 1);
+					*dst++ = (src[0] << 7) | BIT(6) | (src[1] >> 2);
+					*dst++ = (src[1] << 6) | BIT(5) | (src[2] >> 3);
+					*dst++ = (src[2] << 5) | BIT(4) | (src[3] >> 4);
+					*dst++ = (src[3] << 4) | BIT(3) | (src[4] >> 5);
+					*dst++ = (src[4] << 3) | BIT(2) | (src[5] >> 6);
+					*dst++ = (src[5] << 2) | BIT(1) | (src[6] >> 7);
+					*dst++ = (src[6] << 1) | BIT(0);
+					*dst++ = src[7];
+				}
+
+				src += 8;
+				added++;
+			}
+		}
+
+		tr.len = chunk + added;
+
+		tinydrm_dbg_spi_message(spi, &m);
+		ret = spi_sync(spi, &m);
+		if (ret)
+			return ret;
+	};
+
+	return 0;
+}
+
+static int mipi_dbi_spi1_transfer(struct mipi_dbi *mipi, int dc,
+				  const void *buf, size_t len,
+				  unsigned int bpw)
+{
+	struct spi_device *spi = mipi->spi;
+	struct spi_transfer tr = {
+		.bits_per_word = 9,
+	};
+	const u16 *src16 = buf;
+	const u8 *src8 = buf;
+	struct spi_message m;
+	size_t max_chunk;
+	u16 *dst16;
+	int ret;
+
+	if (!tinydrm_spi_bpw_supported(spi, 9))
+		return mipi_dbi_spi1e_transfer(mipi, dc, buf, len, bpw);
+
+	tr.speed_hz = mipi_dbi_spi_cmd_max_speed(spi, len);
+	max_chunk = mipi->tx_buf9_len;
+	dst16 = mipi->tx_buf9;
+
+	if (drm_debug & DRM_UT_DRIVER)
+		pr_debug("[drm:%s] dc=%d, max_chunk=%zu, transfers:\n",
+			 __func__, dc, max_chunk);
+
+	max_chunk = min(max_chunk / 2, len);
+
+	spi_message_init_with_transfers(&m, &tr, 1);
+	tr.tx_buf = dst16;
+
+	while (len) {
+		size_t chunk = min(len, max_chunk);
+		unsigned int i;
+
+		if (bpw == 16 && tinydrm_machine_little_endian()) {
+			for (i = 0; i < (chunk * 2); i += 2) {
+				dst16[i]     = *src16 >> 8;
+				dst16[i + 1] = *src16++ & 0xFF;
+				if (dc) {
+					dst16[i]     |= 0x0100;
+					dst16[i + 1] |= 0x0100;
+				}
+			}
+		} else {
+			for (i = 0; i < chunk; i++) {
+				dst16[i] = *src8++;
+				if (dc)
+					dst16[i] |= 0x0100;
+			}
+		}
+
+		tr.len = chunk;
+		len -= chunk;
+
+		tinydrm_dbg_spi_message(spi, &m);
+		ret = spi_sync(spi, &m);
+		if (ret)
+			return ret;
+	};
+
+	return 0;
+}
+
+static int mipi_dbi_typec1_command(struct mipi_dbi *mipi, u8 cmd,
+				   u8 *parameters, size_t num)
+{
+	unsigned int bpw = (cmd == MIPI_DCS_WRITE_MEMORY_START) ? 16 : 8;
+	int ret;
+
+	if (mipi_dbi_command_is_read(mipi, cmd))
+		return -ENOTSUPP;
+
+	MIPI_DBI_DEBUG_COMMAND(cmd, parameters, num);
+
+	ret = mipi_dbi_spi1_transfer(mipi, 0, &cmd, 1, 8);
+	if (ret || !num)
+		return ret;
+
+	return mipi_dbi_spi1_transfer(mipi, 1, parameters, num, bpw);
+}
+
+/* MIPI DBI Type C Option 3 */
+
+static int mipi_dbi_typec3_command_read(struct mipi_dbi *mipi, u8 cmd,
+					u8 *data, size_t len)
+{
+	struct spi_device *spi = mipi->spi;
+	u32 speed_hz = min_t(u32, MIPI_DBI_MAX_SPI_READ_SPEED,
+			     spi->max_speed_hz / 2);
+	struct spi_transfer tr[2] = {
+		{
+			.speed_hz = speed_hz,
+			.tx_buf = &cmd,
+			.len = 1,
+		}, {
+			.speed_hz = speed_hz,
+			.len = len,
+		},
+	};
+	struct spi_message m;
+	u8 *buf;
+	int ret;
+
+	if (!len)
+		return -EINVAL;
+
+	/*
+	 * Support non-standard 24-bit and 32-bit Nokia read commands which
+	 * start with a dummy clock, so we need to read an extra byte.
+	 */
+	if (cmd == MIPI_DCS_GET_DISPLAY_ID ||
+	    cmd == MIPI_DCS_GET_DISPLAY_STATUS) {
+		if (!(len == 3 || len == 4))
+			return -EINVAL;
+
+		tr[1].len = len + 1;
+	}
+
+	buf = kmalloc(tr[1].len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	tr[1].rx_buf = buf;
+	gpiod_set_value_cansleep(mipi->dc, 0);
+
+	spi_message_init_with_transfers(&m, tr, ARRAY_SIZE(tr));
+	ret = spi_sync(spi, &m);
+	if (ret)
+		goto err_free;
+
+	tinydrm_dbg_spi_message(spi, &m);
+
+	if (tr[1].len == len) {
+		memcpy(data, buf, len);
+	} else {
+		unsigned int i;
+
+		for (i = 0; i < len; i++)
+			data[i] = (buf[i] << 1) | !!(buf[i + 1] & BIT(7));
+	}
+
+	MIPI_DBI_DEBUG_COMMAND(cmd, data, len);
+
+err_free:
+	kfree(buf);
+
+	return ret;
+}
+
+static int mipi_dbi_typec3_command(struct mipi_dbi *mipi, u8 cmd,
+				   u8 *par, size_t num)
+{
+	struct spi_device *spi = mipi->spi;
+	unsigned int bpw = 8;
+	u32 speed_hz;
+	int ret;
+
+	if (mipi_dbi_command_is_read(mipi, cmd))
+		return mipi_dbi_typec3_command_read(mipi, cmd, par, num);
+
+	MIPI_DBI_DEBUG_COMMAND(cmd, par, num);
+
+	gpiod_set_value_cansleep(mipi->dc, 0);
+	speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 1);
+	ret = tinydrm_spi_transfer(spi, speed_hz, NULL, 8, &cmd, 1);
+	if (ret || !num)
+		return ret;
+
+	if (cmd == MIPI_DCS_WRITE_MEMORY_START && !mipi->swap_bytes)
+		bpw = 16;
+
+	gpiod_set_value_cansleep(mipi->dc, 1);
+	speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
+
+	return tinydrm_spi_transfer(spi, speed_hz, NULL, bpw, par, num);
+}
+
+/**
+ * mipi_dbi_spi_init - Initialize MIPI DBI SPI interfaced controller
+ * @spi: SPI device
+ * @dc: D/C gpio (optional)
+ * @mipi: &mipi_dbi structure to initialize
+ * @pipe_funcs: Display pipe functions
+ * @driver: DRM driver
+ * @mode: Display mode
+ * @rotation: Initial rotation in degrees Counter Clock Wise
+ *
+ * This function sets &mipi_dbi->command, enables &mipi->read_commands for the
+ * usual read commands and initializes @mipi using mipi_dbi_init().
+ *
+ * If @dc is set, a Type C Option 3 interface is assumed, if not
+ * Type C Option 1.
+ *
+ * If the SPI master driver doesn't support the necessary bits per word,
+ * the following transformation is used:
+ *
+ * - 9-bit: reorder buffer as 9x 8-bit words, padded with no-op command.
+ * - 16-bit: if big endian send as 8-bit, if little endian swap bytes
+ *
+ * Returns:
+ * Zero on success, negative error code on failure.
+ */
+int mipi_dbi_spi_init(struct spi_device *spi, struct mipi_dbi *mipi,
+		      struct gpio_desc *dc,
+		      const struct drm_simple_display_pipe_funcs *pipe_funcs,
+		      struct drm_driver *driver,
+		      const struct drm_display_mode *mode,
+		      unsigned int rotation)
+{
+	size_t tx_size = tinydrm_spi_max_transfer_size(spi, 0);
+	struct device *dev = &spi->dev;
+	int ret;
+
+	if (tx_size < 16) {
+		DRM_ERROR("SPI transmit buffer too small: %zu\n", tx_size);
+		return -EINVAL;
+	}
+
+	/*
+	 * Even though it's not the SPI device that does DMA (the master does),
+	 * the dma mask is necessary for the dma_alloc_wc() in
+	 * drm_gem_cma_create(). The dma_addr returned will be a physical
+	 * adddress which might be different from the bus address, but this is
+	 * not a problem since the address will not be used.
+	 * The virtual address is used in the transfer and the SPI core
+	 * re-maps it on the SPI master device using the DMA streaming API
+	 * (spi_map_buf()).
+	 */
+	if (!dev->coherent_dma_mask) {
+		ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
+		if (ret) {
+			dev_warn(dev, "Failed to set dma mask %d\n", ret);
+			return ret;
+		}
+	}
+
+	mipi->spi = spi;
+	mipi->read_commands = mipi_dbi_dcs_read_commands;
+
+	if (dc) {
+		mipi->command = mipi_dbi_typec3_command;
+		mipi->dc = dc;
+		if (tinydrm_machine_little_endian() &&
+		    !tinydrm_spi_bpw_supported(spi, 16))
+			mipi->swap_bytes = true;
+	} else {
+		mipi->command = mipi_dbi_typec1_command;
+		mipi->tx_buf9_len = tx_size;
+		mipi->tx_buf9 = devm_kmalloc(dev, tx_size, GFP_KERNEL);
+		if (!mipi->tx_buf9)
+			return -ENOMEM;
+	}
+
+	return mipi_dbi_init(dev, mipi, pipe_funcs, driver, mode, rotation);
+}
+EXPORT_SYMBOL(mipi_dbi_spi_init);
+
+#endif /* CONFIG_SPI */
+
+#ifdef CONFIG_DEBUG_FS
+
+static ssize_t mipi_dbi_debugfs_command_write(struct file *file,
+					      const char __user *ubuf,
+					      size_t count, loff_t *ppos)
+{
+	struct seq_file *m = file->private_data;
+	struct mipi_dbi *mipi = m->private;
+	u8 val, cmd, parameters[64];
+	char *buf, *pos, *token;
+	unsigned int i;
+	int ret;
+
+	buf = memdup_user_nul(ubuf, count);
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
+	/* strip trailing whitespace */
+	for (i = count - 1; i > 0; i--)
+		if (isspace(buf[i]))
+			buf[i] = '\0';
+		else
+			break;
+	i = 0;
+	pos = buf;
+	while (pos) {
+		token = strsep(&pos, " ");
+		if (!token) {
+			ret = -EINVAL;
+			goto err_free;
+		}
+
+		ret = kstrtou8(token, 16, &val);
+		if (ret < 0)
+			goto err_free;
+
+		if (token == buf)
+			cmd = val;
+		else
+			parameters[i++] = val;
+
+		if (i == 64) {
+			ret = -E2BIG;
+			goto err_free;
+		}
+	}
+
+	ret = mipi_dbi_command_buf(mipi, cmd, parameters, i);
+
+err_free:
+	kfree(buf);
+
+	return ret < 0 ? ret : count;
+}
+
+static int mipi_dbi_debugfs_command_show(struct seq_file *m, void *unused)
+{
+	struct mipi_dbi *mipi = m->private;
+	u8 cmd, val[4];
+	size_t len, i;
+	int ret;
+
+	for (cmd = 0; cmd < 255; cmd++) {
+		if (!mipi_dbi_command_is_read(mipi, cmd))
+			continue;
+
+		switch (cmd) {
+		case MIPI_DCS_READ_MEMORY_START:
+		case MIPI_DCS_READ_MEMORY_CONTINUE:
+			len = 2;
+			break;
+		case MIPI_DCS_GET_DISPLAY_ID:
+			len = 3;
+			break;
+		case MIPI_DCS_GET_DISPLAY_STATUS:
+			len = 4;
+			break;
+		default:
+			len = 1;
+			break;
+		}
+
+		seq_printf(m, "%02x: ", cmd);
+		ret = mipi_dbi_command_buf(mipi, cmd, val, len);
+		if (ret) {
+			seq_puts(m, "XX\n");
+			continue;
+		}
+
+		for (i = 0; i < len; i++)
+			seq_printf(m, "%02x", val[i]);
+		seq_puts(m, "\n");
+	}
+
+	return 0;
+}
+
+static int mipi_dbi_debugfs_command_open(struct inode *inode,
+					 struct file *file)
+{
+	return single_open(file, mipi_dbi_debugfs_command_show,
+			   inode->i_private);
+}
+
+static const struct file_operations mipi_dbi_debugfs_command_fops = {
+	.owner = THIS_MODULE,
+	.open = mipi_dbi_debugfs_command_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.write = mipi_dbi_debugfs_command_write,
+};
+
+static const struct drm_info_list mipi_dbi_debugfs_list[] = {
+	{ "fb",   drm_fb_cma_debugfs_show, 0 },
+};
+
+/**
+ * mipi_dbi_debugfs_init - Create debugfs entries
+ * @minor: DRM minor
+ *
+ * This function creates a 'command' debugfs file for sending commands to the
+ * controller or getting the read command values.
+ * Drivers can use this as their &drm_driver->debugfs_init callback.
+ *
+ * Returns:
+ * Zero on success, negative error code on failure.
+ */
+int mipi_dbi_debugfs_init(struct drm_minor *minor)
+{
+	struct tinydrm_device *tdev = minor->dev->dev_private;
+	struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
+	umode_t mode = S_IFREG | S_IWUSR;
+
+	if (mipi->read_commands)
+		mode |= S_IRUGO;
+	debugfs_create_file("command", mode, minor->debugfs_root, mipi,
+			    &mipi_dbi_debugfs_command_fops);
+
+	return drm_debugfs_create_files(mipi_dbi_debugfs_list,
+					ARRAY_SIZE(mipi_dbi_debugfs_list),
+					minor->debugfs_root, minor);
+}
+EXPORT_SYMBOL(mipi_dbi_debugfs_init);
+
+#endif
+
+MODULE_LICENSE("GPL");
diff --git a/include/drm/tinydrm/mipi-dbi.h b/include/drm/tinydrm/mipi-dbi.h
new file mode 100644
index 0000000..d137b16
--- /dev/null
+++ b/include/drm/tinydrm/mipi-dbi.h
@@ -0,0 +1,107 @@
+/*
+ * MIPI Display Bus Interface (DBI) LCD controller support
+ *
+ * Copyright 2016 Noralf Trønnes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_MIPI_DBI_H
+#define __LINUX_MIPI_DBI_H
+
+#include <drm/tinydrm/tinydrm.h>
+
+struct spi_device;
+struct gpio_desc;
+struct regulator;
+
+/**
+ * struct mipi_dbi - MIPI DBI controller
+ * @tinydrm: tinydrm base
+ * @spi: SPI device
+ * @enabled: Pipeline is enabled
+ * @cmdlock: Command lock
+ * @command: Bus specific callback executing commands.
+ * @read_commands: Array of read commands terminated by a zero entry.
+ *                 Reading is disabled if this is NULL.
+ * @dc: Optional D/C gpio.
+ * @tx_buf: Buffer used for transfer (copy clip rect area)
+ * @tx_buf9: Buffer used for Option 1 9-bit conversion
+ * @tx_buf9_len: Size of tx_buf9.
+ * @swap_bytes: Swap bytes in buffer before transfer
+ * @reset: Optional reset gpio
+ * @rotation: initial rotation in degrees Counter Clock Wise
+ * @backlight: backlight device (optional)
+ * @regulator: power regulator (optional)
+ */
+struct mipi_dbi {
+	struct tinydrm_device tinydrm;
+	struct spi_device *spi;
+	bool enabled;
+	struct mutex cmdlock;
+	int (*command)(struct mipi_dbi *mipi, u8 cmd, u8 *param, size_t num);
+	const u8 *read_commands;
+	struct gpio_desc *dc;
+	u16 *tx_buf;
+	void *tx_buf9;
+	size_t tx_buf9_len;
+	bool swap_bytes;
+	struct gpio_desc *reset;
+	unsigned int rotation;
+	struct backlight_device *backlight;
+	struct regulator *regulator;
+};
+
+static inline struct mipi_dbi *
+mipi_dbi_from_tinydrm(struct tinydrm_device *tdev)
+{
+	return container_of(tdev, struct mipi_dbi, tinydrm);
+}
+
+int mipi_dbi_spi_init(struct spi_device *spi, struct mipi_dbi *mipi,
+		      struct gpio_desc *dc,
+		      const struct drm_simple_display_pipe_funcs *pipe_funcs,
+		      struct drm_driver *driver,
+		      const struct drm_display_mode *mode,
+		      unsigned int rotation);
+int mipi_dbi_init(struct device *dev, struct mipi_dbi *mipi,
+		  const struct drm_simple_display_pipe_funcs *pipe_funcs,
+		  struct drm_driver *driver,
+		  const struct drm_display_mode *mode, unsigned int rotation);
+void mipi_dbi_pipe_enable(struct drm_simple_display_pipe *pipe,
+			  struct drm_crtc_state *crtc_state);
+void mipi_dbi_pipe_disable(struct drm_simple_display_pipe *pipe);
+void mipi_dbi_hw_reset(struct mipi_dbi *mipi);
+bool mipi_dbi_display_is_on(struct mipi_dbi *mipi);
+
+int mipi_dbi_command_read(struct mipi_dbi *mipi, u8 cmd, u8 *val);
+int mipi_dbi_command_buf(struct mipi_dbi *mipi, u8 cmd, u8 *data, size_t len);
+
+/**
+ * mipi_dbi_command - MIPI DCS command with optional parameter(s)
+ * @mipi: MIPI structure
+ * @cmd: Command
+ * @seq...: Optional parameter(s)
+ *
+ * Send MIPI DCS command to the controller. Use mipi_dbi_command_read() for
+ * get/read.
+ *
+ * Returns:
+ * Zero on success, negative error code on failure.
+ */
+#define mipi_dbi_command(mipi, cmd, seq...) \
+({ \
+	u8 d[] = { seq }; \
+	mipi_dbi_command_buf(mipi, cmd, d, ARRAY_SIZE(d)); \
+})
+
+#ifdef CONFIG_DEBUG_FS
+int mipi_dbi_debugfs_init(struct drm_minor *minor);
+#else
+#define mipi_dbi_debugfs_init		NULL
+#endif
+
+#endif /* __LINUX_MIPI_DBI_H */
