diff mbox

[28/41] drm/bridge: analogix_dp: Don't use ANALOGIX_DP_PLL_CTL to control pll

Message ID 20170310043305.17216-29-seanpaul@chromium.org (mailing list archive)
State New, archived
Headers show

Commit Message

Sean Paul March 10, 2017, 4:32 a.m. UTC 
From: zain wang <wzz@rock-chips.com>

There is no register named ANALOGIX_DP_PLL_CTL in Rockchip edp phy reg
list.  We should use BIT_4 in ANALOGIX_DP_PD to control the pll power
instead of ANALOGIX_DP_PLL_CTL.

Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

Comments

Andrzej Hajda March 22, 2017, 9:17 a.m. UTC | #1 
On 10.03.2017 05:32, Sean Paul wrote:
> From: zain wang <wzz@rock-chips.com>
>
> There is no register named ANALOGIX_DP_PLL_CTL in Rockchip edp phy reg
> list.  We should use BIT_4 in ANALOGIX_DP_PD to control the pll power
> instead of ANALOGIX_DP_PLL_CTL.
>
> Cc: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: zain wang <wzz@rock-chips.com>
> Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

Small comment below.

> ---
>  drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 20 ++++++++++++--------
>  1 file changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> index 1cb57e528ec8..2cacd1e84b4d 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> @@ -230,16 +230,20 @@ enum pll_status analogix_dp_get_pll_lock_status(struct analogix_dp_device *dp)
>  void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool enable)
>  {
>  	u32 reg;
> +	u32 mask = DP_PLL_PD;
> +	u32 pd_addr = ANALOGIX_DP_PLL_CTL;
>  
> -	if (enable) {
> -		reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL);
> -		reg |= DP_PLL_PD;
> -		writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL);
> -	} else {
> -		reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL);
> -		reg &= ~DP_PLL_PD;
> -		writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL);
> +	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) {
> +		pd_addr = ANALOGIX_DP_PD;
> +		mask = RK_PLL_PD;
>  	}
> +
> +	reg = readl(dp->reg_base + pd_addr);
> +	if (enable)
> +		reg |= mask;
> +	else
> +		reg &= ~mask;
> +	writel(reg, dp->reg_base + pd_addr);

This pattern (readl,set bits,writel) is repeated so many times, maybe it
would be good to add some helper.

Regards
Andrzej

>  }
>  
>  void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
diff mbox

Patch

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 1cb57e528ec8..2cacd1e84b4d 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -230,16 +230,20 @@  enum pll_status analogix_dp_get_pll_lock_status(struct analogix_dp_device *dp)
 void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool enable)
 {
 	u32 reg;
+	u32 mask = DP_PLL_PD;
+	u32 pd_addr = ANALOGIX_DP_PLL_CTL;
 
-	if (enable) {
-		reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL);
-		reg |= DP_PLL_PD;
-		writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL);
-	} else {
-		reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL);
-		reg &= ~DP_PLL_PD;
-		writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL);
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) {
+		pd_addr = ANALOGIX_DP_PD;
+		mask = RK_PLL_PD;
 	}
+
+	reg = readl(dp->reg_base + pd_addr);
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	writel(reg, dp->reg_base + pd_addr);
 }
 
 void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,