@@ -15,12 +15,17 @@
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/gpio/consumer.h>
+#include <linux/mutex.h>
#include "../dss/omapdss.h"
struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
+ void (*hpd_cb)(void *cb_data, enum drm_connector_status status);
+ void *hpd_cb_data;
+ bool hpd_enabled;
+ struct mutex hpd_lock;
struct gpio_desc *ct_cp_hpd_gpio;
struct gpio_desc *ls_oe_gpio;
@@ -162,6 +167,49 @@ static bool tpd_detect(struct omap_dss_device *dssdev)
return gpiod_get_value_cansleep(ddata->hpd_gpio);
}
+static int tpd_register_hpd_cb(struct omap_dss_device *dssdev,
+ void (*cb)(void *cb_data,
+ enum drm_connector_status status),
+ void *cb_data)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ mutex_lock(&ddata->hpd_lock);
+ ddata->hpd_cb = cb;
+ ddata->hpd_cb_data = cb_data;
+ mutex_unlock(&ddata->hpd_lock);
+
+ return 0;
+}
+
+static void tpd_unregister_hpd_cb(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ mutex_lock(&ddata->hpd_lock);
+ ddata->hpd_cb = NULL;
+ ddata->hpd_cb_data = NULL;
+ mutex_unlock(&ddata->hpd_lock);
+}
+
+static void tpd_enable_hpd(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ mutex_lock(&ddata->hpd_lock);
+ ddata->hpd_enabled = true;
+ mutex_unlock(&ddata->hpd_lock);
+}
+
+static void tpd_disable_hpd(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ mutex_lock(&ddata->hpd_lock);
+ ddata->hpd_enabled = false;
+ mutex_unlock(&ddata->hpd_lock);
+}
+
static int tpd_set_infoframe(struct omap_dss_device *dssdev,
const struct hdmi_avi_infoframe *avi)
{
@@ -193,10 +241,34 @@ static const struct omapdss_hdmi_ops tpd_hdmi_ops = {
.read_edid = tpd_read_edid,
.detect = tpd_detect,
+ .register_hpd_cb = tpd_register_hpd_cb,
+ .unregister_hpd_cb = tpd_unregister_hpd_cb,
+ .enable_hpd = tpd_enable_hpd,
+ .disable_hpd = tpd_disable_hpd,
.set_infoframe = tpd_set_infoframe,
.set_hdmi_mode = tpd_set_hdmi_mode,
};
+static irqreturn_t tpd_hpd_isr(int irq, void *data)
+{
+ struct panel_drv_data *ddata = data;
+
+ mutex_lock(&ddata->hpd_lock);
+ if (ddata->hpd_enabled && ddata->hpd_cb) {
+ enum drm_connector_status status;
+
+ if (tpd_detect(&ddata->dssdev))
+ status = connector_status_connected;
+ else
+ status = connector_status_disconnected;
+
+ ddata->hpd_cb(ddata->hpd_cb_data, status);
+ }
+ mutex_unlock(&ddata->hpd_lock);
+
+ return IRQ_HANDLED;
+}
+
static int tpd_probe_of(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
@@ -261,6 +333,15 @@ static int tpd_probe(struct platform_device *pdev)
ddata->hpd_gpio = gpio;
+ mutex_init(&ddata->hpd_lock);
+
+ r = devm_request_threaded_irq(&pdev->dev, gpiod_to_irq(ddata->hpd_gpio),
+ NULL, tpd_hpd_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "tpd12s015 hpd", ddata);
+ if (r)
+ goto err_gpio;
+
dssdev = &ddata->dssdev;
dssdev->ops.hdmi = &tpd_hdmi_ops;
dssdev->dev = &pdev->dev;
Use interrupt handler for hpd GPIO to react to HPD changes. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- .../gpu/drm/omapdrm/displays/encoder-tpd12s015.c | 81 ++++++++++++++++++++++ 1 file changed, 81 insertions(+)