| Message ID | 20170830180711.2791-5-linus.walleij@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wednesday, 2017-08-30 20:07:08 +0200, Linus Walleij wrote: > We detect and enable the use of the PL110 variant, an earlier > incarnation of PL111. The only real difference is that the > control and interrupt enable registers have swapped place. > The Versatile AB and Versatile PB have a variant inbetween > PL110 and PL111, it is PL110 but they have already swapped the > two registers so those two need a bit of special handling. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > drivers/gpu/drm/pl111/pl111_display.c | 27 +++-------- > drivers/gpu/drm/pl111/pl111_drm.h | 17 +++++++ > drivers/gpu/drm/pl111/pl111_drv.c | 84 ++++++++++++++++++++++++++++++++++- > 3 files changed, 105 insertions(+), 23 deletions(-) > > diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c > index ef86ef60aed1..6447f36c243a 100644 > --- a/drivers/gpu/drm/pl111/pl111_display.c > +++ b/drivers/gpu/drm/pl111/pl111_display.c > @@ -201,7 +201,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe, > break; > } > > - writel(cntl, priv->regs + CLCD_PL111_CNTL); > + writel(cntl, priv->regs + priv->ctrl); > > drm_panel_enable(priv->panel); > > @@ -219,7 +219,7 @@ void pl111_display_disable(struct drm_simple_display_pipe *pipe) > drm_panel_disable(priv->panel); > > /* Disable and Power Down */ > - writel(0, priv->regs + CLCD_PL111_CNTL); > + writel(0, priv->regs + priv->ctrl); > > drm_panel_unprepare(priv->panel); > > @@ -259,7 +259,7 @@ int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc) > { > struct pl111_drm_dev_private *priv = drm->dev_private; > > - writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + CLCD_PL111_IENB); > + writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + priv->ienb); > > return 0; > } > @@ -268,7 +268,7 @@ void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc) > { > struct pl111_drm_dev_private *priv = drm->dev_private; > > - writel(0, priv->regs + CLCD_PL111_IENB); > + writel(0, priv->regs + priv->ienb); > } > > static int pl111_display_prepare_fb(struct drm_simple_display_pipe *pipe, > @@ -412,22 +412,6 @@ int pl111_display_init(struct drm_device *drm) > struct device_node *endpoint; > u32 tft_r0b0g0[3]; > int ret; > - static const u32 formats[] = { > - DRM_FORMAT_ABGR8888, > - DRM_FORMAT_XBGR8888, > - DRM_FORMAT_ARGB8888, > - DRM_FORMAT_XRGB8888, > - DRM_FORMAT_BGR565, > - DRM_FORMAT_RGB565, > - DRM_FORMAT_ABGR1555, > - DRM_FORMAT_XBGR1555, > - DRM_FORMAT_ARGB1555, > - DRM_FORMAT_XRGB1555, > - DRM_FORMAT_ABGR4444, > - DRM_FORMAT_XBGR4444, > - DRM_FORMAT_ARGB4444, > - DRM_FORMAT_XRGB4444, > - }; > > endpoint = of_graph_get_next_endpoint(dev->of_node, NULL); > if (!endpoint) > @@ -456,7 +440,8 @@ int pl111_display_init(struct drm_device *drm) > > ret = drm_simple_display_pipe_init(drm, &priv->pipe, > &pl111_display_funcs, > - formats, ARRAY_SIZE(formats), > + priv->variant->formats, > + priv->variant->nformats, > priv->connector); > if (ret) > return ret; > diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h > index 8804af0f8997..b316a8a0fbc0 100644 > --- a/drivers/gpu/drm/pl111/pl111_drm.h > +++ b/drivers/gpu/drm/pl111/pl111_drm.h > @@ -31,6 +31,20 @@ > > struct drm_minor; > > +/** > + * struct pl111_variant_data - encodes IP differences > + * @name: the name of this variant > + * @is_pl110: this is the early PL110 variant > + * @formats: array of supported pixel formats on this variant > + * @nformats: the length of the array of supported pixel formats > + */ > +struct pl111_variant_data { > + const char *name; > + bool is_pl110; > + const u32 *formats; > + unsigned int nformats; > +}; > + > struct pl111_drm_dev_private { > struct drm_device *drm; > > @@ -42,6 +56,8 @@ struct pl111_drm_dev_private { > struct drm_fbdev_cma *fbdev; > > void *regs; > + u32 ienb; > + u32 ctrl; > /* The pixel clock (a reference to our clock divider off of CLCDCLK). */ > struct clk *clk; > /* pl111's internal clock divider. */ > @@ -50,6 +66,7 @@ struct pl111_drm_dev_private { > * subsystem and pl111_display_enable(). > */ > spinlock_t tim2_lock; > + struct pl111_variant_data *variant; > }; > > int pl111_display_init(struct drm_device *dev); > diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c > index e66cbf202e17..f6863c0fb809 100644 > --- a/drivers/gpu/drm/pl111/pl111_drv.c > +++ b/drivers/gpu/drm/pl111/pl111_drv.c > @@ -206,6 +206,7 @@ static int pl111_amba_probe(struct amba_device *amba_dev, > { > struct device *dev = &amba_dev->dev; > struct pl111_drm_dev_private *priv; > + struct pl111_variant_data *variant = id->data; > struct drm_device *drm; > int ret; > > @@ -219,6 +220,33 @@ static int pl111_amba_probe(struct amba_device *amba_dev, > amba_set_drvdata(amba_dev, drm); > priv->drm = drm; > drm->dev_private = priv; > + priv->variant = variant; > + > + /* > + * The PL110 and PL111 variants have two registers > + * swapped: interrupt enable and control. For this reason > + * we use offsets that we can change per variant. > + */ > + if (variant->is_pl110) { > + /* > + * The ARM Versatile boards are even more special: > + * their PrimeCell ID say they are PL110 but the > + * control and interrupt enable registers are anyway > + * swapped to the PL111 order so they are not following > + * the PL110 datasheet. > + */ > + if (of_machine_is_compatible("arm,versatile-ab") || > + of_machine_is_compatible("arm,versatile-pb")) { > + priv->ienb = CLCD_PL111_IENB; > + priv->ctrl = CLCD_PL111_CNTL; > + } else { > + priv->ienb = CLCD_PL110_IENB; > + priv->ctrl = CLCD_PL110_CNTL; > + } > + } else { > + priv->ienb = CLCD_PL111_IENB; > + priv->ctrl = CLCD_PL111_CNTL; > + } > > priv->regs = devm_ioremap_resource(dev, &amba_dev->res); > if (IS_ERR(priv->regs)) { > @@ -227,10 +255,10 @@ static int pl111_amba_probe(struct amba_device *amba_dev, > } > > /* turn off interrupts before requesting the irq */ > - writel(0, priv->regs + CLCD_PL111_IENB); > + writel(0, priv->regs + priv->ienb); > > ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0, > - "pl111", priv); > + variant->name, priv); > if (ret != 0) { > dev_err(dev, "%s failed irq %d\n", __func__, ret); > return ret; > @@ -269,10 +297,62 @@ static int pl111_amba_remove(struct amba_device *amba_dev) > return 0; > } > > +/* > + * This variant exist in early versions like the ARM Integrator > + * and this version lacks the 565 and 444 pixel formats. > + */ > +static const u32 pl110_pixel_formats[] = { > + DRM_FORMAT_ABGR8888, > + DRM_FORMAT_XBGR8888, > + DRM_FORMAT_ARGB8888, > + DRM_FORMAT_XRGB8888, > + DRM_FORMAT_ABGR1555, > + DRM_FORMAT_XBGR1555, > + DRM_FORMAT_ARGB1555, > + DRM_FORMAT_XRGB1555, > +}; > + > +struct pl111_variant_data pl110_variant = { I think this (and `pl111_variant` below) can be `static const`, right? > + .name = "PL110", > + .is_pl110 = true, > + .formats = pl110_pixel_formats, > + .nformats = ARRAY_SIZE(pl110_pixel_formats), > +}; > + > +/* RealView, Versatile Express etc use this modern variant */ > +static const u32 pl111_pixel_formats[] = { > + DRM_FORMAT_ABGR8888, > + DRM_FORMAT_XBGR8888, > + DRM_FORMAT_ARGB8888, > + DRM_FORMAT_XRGB8888, > + DRM_FORMAT_BGR565, > + DRM_FORMAT_RGB565, > + DRM_FORMAT_ABGR1555, > + DRM_FORMAT_XBGR1555, > + DRM_FORMAT_ARGB1555, > + DRM_FORMAT_XRGB1555, > + DRM_FORMAT_ABGR4444, > + DRM_FORMAT_XBGR4444, > + DRM_FORMAT_ARGB4444, > + DRM_FORMAT_XRGB4444, > +}; > + > +struct pl111_variant_data pl111_variant = { > + .name = "PL111", > + .formats = pl111_pixel_formats, > + .nformats = ARRAY_SIZE(pl111_pixel_formats), > +}; > + > static struct amba_id pl111_id_table[] = { Not 100% sure on this one, but I think it can also be `const`, as amba_lookup() and pl111_amba_probe() are the only users I could find and both take a `const struct amba_id *` (and pl111_amba_probe() doesn't even use it). (Just a couple drive-by comments, I don't know enough for an actual review, sorry...) > { > + .id = 0x00041110, > + .mask = 0x000fffff, > + .data = &pl110_variant, > + }, > + { > .id = 0x00041111, > .mask = 0x000fffff, > + .data = &pl111_variant, > }, > {0, 0}, > }; > -- > 2.13.5 >
Linus Walleij <linus.walleij@linaro.org> writes: > We detect and enable the use of the PL110 variant, an earlier > incarnation of PL111. The only real difference is that the > control and interrupt enable registers have swapped place. > The Versatile AB and Versatile PB have a variant inbetween > PL110 and PL111, it is PL110 but they have already swapped the > two registers so those two need a bit of special handling. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> With the other Eric's little const fixes, Reviewed-by: Eric Anholt <eric@anholt.net>
On 31 August 2017 at 11:19, Eric Engestrom <eric.engestrom@imgtec.com> wrote: > On Wednesday, 2017-08-30 20:07:08 +0200, Linus Walleij wrote: >> We detect and enable the use of the PL110 variant, an earlier >> incarnation of PL111. The only real difference is that the >> control and interrupt enable registers have swapped place. >> The Versatile AB and Versatile PB have a variant inbetween >> PL110 and PL111, it is PL110 but they have already swapped the >> two registers so those two need a bit of special handling. >> >> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> >> --- >> drivers/gpu/drm/pl111/pl111_display.c | 27 +++-------- >> drivers/gpu/drm/pl111/pl111_drm.h | 17 +++++++ >> drivers/gpu/drm/pl111/pl111_drv.c | 84 ++++++++++++++++++++++++++++++++++- >> 3 files changed, 105 insertions(+), 23 deletions(-) >> >> diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c >> index ef86ef60aed1..6447f36c243a 100644 >> --- a/drivers/gpu/drm/pl111/pl111_display.c >> +++ b/drivers/gpu/drm/pl111/pl111_display.c >> @@ -201,7 +201,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe, >> break; >> } >> >> - writel(cntl, priv->regs + CLCD_PL111_CNTL); >> + writel(cntl, priv->regs + priv->ctrl); >> >> drm_panel_enable(priv->panel); >> >> @@ -219,7 +219,7 @@ void pl111_display_disable(struct drm_simple_display_pipe *pipe) >> drm_panel_disable(priv->panel); >> >> /* Disable and Power Down */ >> - writel(0, priv->regs + CLCD_PL111_CNTL); >> + writel(0, priv->regs + priv->ctrl); >> >> drm_panel_unprepare(priv->panel); >> >> @@ -259,7 +259,7 @@ int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc) >> { >> struct pl111_drm_dev_private *priv = drm->dev_private; >> >> - writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + CLCD_PL111_IENB); >> + writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + priv->ienb); >> >> return 0; >> } >> @@ -268,7 +268,7 @@ void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc) >> { >> struct pl111_drm_dev_private *priv = drm->dev_private; >> >> - writel(0, priv->regs + CLCD_PL111_IENB); >> + writel(0, priv->regs + priv->ienb); >> } >> >> static int pl111_display_prepare_fb(struct drm_simple_display_pipe *pipe, >> @@ -412,22 +412,6 @@ int pl111_display_init(struct drm_device *drm) >> struct device_node *endpoint; >> u32 tft_r0b0g0[3]; >> int ret; >> - static const u32 formats[] = { >> - DRM_FORMAT_ABGR8888, >> - DRM_FORMAT_XBGR8888, >> - DRM_FORMAT_ARGB8888, >> - DRM_FORMAT_XRGB8888, >> - DRM_FORMAT_BGR565, >> - DRM_FORMAT_RGB565, >> - DRM_FORMAT_ABGR1555, >> - DRM_FORMAT_XBGR1555, >> - DRM_FORMAT_ARGB1555, >> - DRM_FORMAT_XRGB1555, >> - DRM_FORMAT_ABGR4444, >> - DRM_FORMAT_XBGR4444, >> - DRM_FORMAT_ARGB4444, >> - DRM_FORMAT_XRGB4444, >> - }; >> >> endpoint = of_graph_get_next_endpoint(dev->of_node, NULL); >> if (!endpoint) >> @@ -456,7 +440,8 @@ int pl111_display_init(struct drm_device *drm) >> >> ret = drm_simple_display_pipe_init(drm, &priv->pipe, >> &pl111_display_funcs, >> - formats, ARRAY_SIZE(formats), >> + priv->variant->formats, >> + priv->variant->nformats, >> priv->connector); >> if (ret) >> return ret; >> diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h >> index 8804af0f8997..b316a8a0fbc0 100644 >> --- a/drivers/gpu/drm/pl111/pl111_drm.h >> +++ b/drivers/gpu/drm/pl111/pl111_drm.h >> @@ -31,6 +31,20 @@ >> >> struct drm_minor; >> >> +/** >> + * struct pl111_variant_data - encodes IP differences >> + * @name: the name of this variant >> + * @is_pl110: this is the early PL110 variant >> + * @formats: array of supported pixel formats on this variant >> + * @nformats: the length of the array of supported pixel formats >> + */ >> +struct pl111_variant_data { >> + const char *name; >> + bool is_pl110; >> + const u32 *formats; >> + unsigned int nformats; >> +}; >> + >> struct pl111_drm_dev_private { >> struct drm_device *drm; >> >> @@ -42,6 +56,8 @@ struct pl111_drm_dev_private { >> struct drm_fbdev_cma *fbdev; >> >> void *regs; >> + u32 ienb; >> + u32 ctrl; >> /* The pixel clock (a reference to our clock divider off of CLCDCLK). */ >> struct clk *clk; >> /* pl111's internal clock divider. */ >> @@ -50,6 +66,7 @@ struct pl111_drm_dev_private { >> * subsystem and pl111_display_enable(). >> */ >> spinlock_t tim2_lock; >> + struct pl111_variant_data *variant; >> }; >> >> int pl111_display_init(struct drm_device *dev); >> diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c >> index e66cbf202e17..f6863c0fb809 100644 >> --- a/drivers/gpu/drm/pl111/pl111_drv.c >> +++ b/drivers/gpu/drm/pl111/pl111_drv.c >> @@ -206,6 +206,7 @@ static int pl111_amba_probe(struct amba_device *amba_dev, >> { >> struct device *dev = &amba_dev->dev; >> struct pl111_drm_dev_private *priv; >> + struct pl111_variant_data *variant = id->data; >> struct drm_device *drm; >> int ret; >> >> @@ -219,6 +220,33 @@ static int pl111_amba_probe(struct amba_device *amba_dev, >> amba_set_drvdata(amba_dev, drm); >> priv->drm = drm; >> drm->dev_private = priv; >> + priv->variant = variant; >> + >> + /* >> + * The PL110 and PL111 variants have two registers >> + * swapped: interrupt enable and control. For this reason >> + * we use offsets that we can change per variant. >> + */ >> + if (variant->is_pl110) { >> + /* >> + * The ARM Versatile boards are even more special: >> + * their PrimeCell ID say they are PL110 but the >> + * control and interrupt enable registers are anyway >> + * swapped to the PL111 order so they are not following >> + * the PL110 datasheet. >> + */ >> + if (of_machine_is_compatible("arm,versatile-ab") || >> + of_machine_is_compatible("arm,versatile-pb")) { >> + priv->ienb = CLCD_PL111_IENB; >> + priv->ctrl = CLCD_PL111_CNTL; >> + } else { >> + priv->ienb = CLCD_PL110_IENB; >> + priv->ctrl = CLCD_PL110_CNTL; >> + } >> + } else { >> + priv->ienb = CLCD_PL111_IENB; >> + priv->ctrl = CLCD_PL111_CNTL; >> + } >> >> priv->regs = devm_ioremap_resource(dev, &amba_dev->res); >> if (IS_ERR(priv->regs)) { >> @@ -227,10 +255,10 @@ static int pl111_amba_probe(struct amba_device *amba_dev, >> } >> >> /* turn off interrupts before requesting the irq */ >> - writel(0, priv->regs + CLCD_PL111_IENB); >> + writel(0, priv->regs + priv->ienb); >> >> ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0, >> - "pl111", priv); >> + variant->name, priv); >> if (ret != 0) { >> dev_err(dev, "%s failed irq %d\n", __func__, ret); >> return ret; >> @@ -269,10 +297,62 @@ static int pl111_amba_remove(struct amba_device *amba_dev) >> return 0; >> } >> >> +/* >> + * This variant exist in early versions like the ARM Integrator >> + * and this version lacks the 565 and 444 pixel formats. >> + */ >> +static const u32 pl110_pixel_formats[] = { >> + DRM_FORMAT_ABGR8888, >> + DRM_FORMAT_XBGR8888, >> + DRM_FORMAT_ARGB8888, >> + DRM_FORMAT_XRGB8888, >> + DRM_FORMAT_ABGR1555, >> + DRM_FORMAT_XBGR1555, >> + DRM_FORMAT_ARGB1555, >> + DRM_FORMAT_XRGB1555, >> +}; >> + >> +struct pl111_variant_data pl110_variant = { > > I think this (and `pl111_variant` below) can be `static const`, right? > Static - yes, const - I don't think so. Struct amba_id::data lacks the constness, so the const qualifier will get discarded. In practise everyone considers/uses ::data as const, so that could be tweaked with separate patch. -Emil
On Fri, Sep 1, 2017 at 10:23 AM, Emil Velikov <emil.l.velikov@gmail.com> wrote: >>Eric E: >>> +struct pl111_variant_data pl110_variant = { >> >> I think this (and `pl111_variant` below) can be `static const`, right? >> > Static - yes, const - I don't think so. > Struct amba_id::data lacks the constness, so the const qualifier will > get discarded. I fixed it with a (void*) cast so we can have it right in the driver. > In practise everyone considers/uses ::data as const, so that could be > tweaked with separate patch. I think it is not necessarily possible to make that const since the amba_id is used in several dynamically generated board files. But I may be wrong. Yours, Linus Walleij
diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c index ef86ef60aed1..6447f36c243a 100644 --- a/drivers/gpu/drm/pl111/pl111_display.c +++ b/drivers/gpu/drm/pl111/pl111_display.c @@ -201,7 +201,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe, break; } - writel(cntl, priv->regs + CLCD_PL111_CNTL); + writel(cntl, priv->regs + priv->ctrl); drm_panel_enable(priv->panel); @@ -219,7 +219,7 @@ void pl111_display_disable(struct drm_simple_display_pipe *pipe) drm_panel_disable(priv->panel); /* Disable and Power Down */ - writel(0, priv->regs + CLCD_PL111_CNTL); + writel(0, priv->regs + priv->ctrl); drm_panel_unprepare(priv->panel); @@ -259,7 +259,7 @@ int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc) { struct pl111_drm_dev_private *priv = drm->dev_private; - writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + CLCD_PL111_IENB); + writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + priv->ienb); return 0; } @@ -268,7 +268,7 @@ void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc) { struct pl111_drm_dev_private *priv = drm->dev_private; - writel(0, priv->regs + CLCD_PL111_IENB); + writel(0, priv->regs + priv->ienb); } static int pl111_display_prepare_fb(struct drm_simple_display_pipe *pipe, @@ -412,22 +412,6 @@ int pl111_display_init(struct drm_device *drm) struct device_node *endpoint; u32 tft_r0b0g0[3]; int ret; - static const u32 formats[] = { - DRM_FORMAT_ABGR8888, - DRM_FORMAT_XBGR8888, - DRM_FORMAT_ARGB8888, - DRM_FORMAT_XRGB8888, - DRM_FORMAT_BGR565, - DRM_FORMAT_RGB565, - DRM_FORMAT_ABGR1555, - DRM_FORMAT_XBGR1555, - DRM_FORMAT_ARGB1555, - DRM_FORMAT_XRGB1555, - DRM_FORMAT_ABGR4444, - DRM_FORMAT_XBGR4444, - DRM_FORMAT_ARGB4444, - DRM_FORMAT_XRGB4444, - }; endpoint = of_graph_get_next_endpoint(dev->of_node, NULL); if (!endpoint) @@ -456,7 +440,8 @@ int pl111_display_init(struct drm_device *drm) ret = drm_simple_display_pipe_init(drm, &priv->pipe, &pl111_display_funcs, - formats, ARRAY_SIZE(formats), + priv->variant->formats, + priv->variant->nformats, priv->connector); if (ret) return ret; diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h index 8804af0f8997..b316a8a0fbc0 100644 --- a/drivers/gpu/drm/pl111/pl111_drm.h +++ b/drivers/gpu/drm/pl111/pl111_drm.h @@ -31,6 +31,20 @@ struct drm_minor; +/** + * struct pl111_variant_data - encodes IP differences + * @name: the name of this variant + * @is_pl110: this is the early PL110 variant + * @formats: array of supported pixel formats on this variant + * @nformats: the length of the array of supported pixel formats + */ +struct pl111_variant_data { + const char *name; + bool is_pl110; + const u32 *formats; + unsigned int nformats; +}; + struct pl111_drm_dev_private { struct drm_device *drm; @@ -42,6 +56,8 @@ struct pl111_drm_dev_private { struct drm_fbdev_cma *fbdev; void *regs; + u32 ienb; + u32 ctrl; /* The pixel clock (a reference to our clock divider off of CLCDCLK). */ struct clk *clk; /* pl111's internal clock divider. */ @@ -50,6 +66,7 @@ struct pl111_drm_dev_private { * subsystem and pl111_display_enable(). */ spinlock_t tim2_lock; + struct pl111_variant_data *variant; }; int pl111_display_init(struct drm_device *dev); diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c index e66cbf202e17..f6863c0fb809 100644 --- a/drivers/gpu/drm/pl111/pl111_drv.c +++ b/drivers/gpu/drm/pl111/pl111_drv.c @@ -206,6 +206,7 @@ static int pl111_amba_probe(struct amba_device *amba_dev, { struct device *dev = &amba_dev->dev; struct pl111_drm_dev_private *priv; + struct pl111_variant_data *variant = id->data; struct drm_device *drm; int ret; @@ -219,6 +220,33 @@ static int pl111_amba_probe(struct amba_device *amba_dev, amba_set_drvdata(amba_dev, drm); priv->drm = drm; drm->dev_private = priv; + priv->variant = variant; + + /* + * The PL110 and PL111 variants have two registers + * swapped: interrupt enable and control. For this reason + * we use offsets that we can change per variant. + */ + if (variant->is_pl110) { + /* + * The ARM Versatile boards are even more special: + * their PrimeCell ID say they are PL110 but the + * control and interrupt enable registers are anyway + * swapped to the PL111 order so they are not following + * the PL110 datasheet. + */ + if (of_machine_is_compatible("arm,versatile-ab") || + of_machine_is_compatible("arm,versatile-pb")) { + priv->ienb = CLCD_PL111_IENB; + priv->ctrl = CLCD_PL111_CNTL; + } else { + priv->ienb = CLCD_PL110_IENB; + priv->ctrl = CLCD_PL110_CNTL; + } + } else { + priv->ienb = CLCD_PL111_IENB; + priv->ctrl = CLCD_PL111_CNTL; + } priv->regs = devm_ioremap_resource(dev, &amba_dev->res); if (IS_ERR(priv->regs)) { @@ -227,10 +255,10 @@ static int pl111_amba_probe(struct amba_device *amba_dev, } /* turn off interrupts before requesting the irq */ - writel(0, priv->regs + CLCD_PL111_IENB); + writel(0, priv->regs + priv->ienb); ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0, - "pl111", priv); + variant->name, priv); if (ret != 0) { dev_err(dev, "%s failed irq %d\n", __func__, ret); return ret; @@ -269,10 +297,62 @@ static int pl111_amba_remove(struct amba_device *amba_dev) return 0; } +/* + * This variant exist in early versions like the ARM Integrator + * and this version lacks the 565 and 444 pixel formats. + */ +static const u32 pl110_pixel_formats[] = { + DRM_FORMAT_ABGR8888, + DRM_FORMAT_XBGR8888, + DRM_FORMAT_ARGB8888, + DRM_FORMAT_XRGB8888, + DRM_FORMAT_ABGR1555, + DRM_FORMAT_XBGR1555, + DRM_FORMAT_ARGB1555, + DRM_FORMAT_XRGB1555, +}; + +struct pl111_variant_data pl110_variant = { + .name = "PL110", + .is_pl110 = true, + .formats = pl110_pixel_formats, + .nformats = ARRAY_SIZE(pl110_pixel_formats), +}; + +/* RealView, Versatile Express etc use this modern variant */ +static const u32 pl111_pixel_formats[] = { + DRM_FORMAT_ABGR8888, + DRM_FORMAT_XBGR8888, + DRM_FORMAT_ARGB8888, + DRM_FORMAT_XRGB8888, + DRM_FORMAT_BGR565, + DRM_FORMAT_RGB565, + DRM_FORMAT_ABGR1555, + DRM_FORMAT_XBGR1555, + DRM_FORMAT_ARGB1555, + DRM_FORMAT_XRGB1555, + DRM_FORMAT_ABGR4444, + DRM_FORMAT_XBGR4444, + DRM_FORMAT_ARGB4444, + DRM_FORMAT_XRGB4444, +}; + +struct pl111_variant_data pl111_variant = { + .name = "PL111", + .formats = pl111_pixel_formats, + .nformats = ARRAY_SIZE(pl111_pixel_formats), +}; + static struct amba_id pl111_id_table[] = { { + .id = 0x00041110, + .mask = 0x000fffff, + .data = &pl110_variant, + }, + { .id = 0x00041111, .mask = 0x000fffff, + .data = &pl111_variant, }, {0, 0}, };
We detect and enable the use of the PL110 variant, an earlier incarnation of PL111. The only real difference is that the control and interrupt enable registers have swapped place. The Versatile AB and Versatile PB have a variant inbetween PL110 and PL111, it is PL110 but they have already swapped the two registers so those two need a bit of special handling. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/gpu/drm/pl111/pl111_display.c | 27 +++-------- drivers/gpu/drm/pl111/pl111_drm.h | 17 +++++++ drivers/gpu/drm/pl111/pl111_drv.c | 84 ++++++++++++++++++++++++++++++++++- 3 files changed, 105 insertions(+), 23 deletions(-)