| Message ID | 20171222122243.25735-2-icenowy@aosc.io (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Dec 22, 2017 at 6:22 AM, Icenowy Zheng <icenowy@aosc.io> wrote: > The DE2 CCU is different on A83T and H3 -- the parent of the clocks on > A83T is PLL_DE but on H3 it's the DE module clock. This is not noticed > when I develop the DE2 CCU driver. > > Fix the binding by using different compatibles for A83T and H3, adding > notes for the PLL_DE usage on A83T, and change the binding example's > compatible from A83T to H3 (as it specifies the DE module clock). > > Fixes: ed74f8a8a679 ("dt-bindings: add binding for the Allwinner DE2 CCU") > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > --- > Documentation/devicetree/bindings/clock/sun8i-de2.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) Please add acks when posting new versions. Rob
diff --git a/Documentation/devicetree/bindings/clock/sun8i-de2.txt b/Documentation/devicetree/bindings/clock/sun8i-de2.txt index 631d27cd89d6..f2fa87c4765c 100644 --- a/Documentation/devicetree/bindings/clock/sun8i-de2.txt +++ b/Documentation/devicetree/bindings/clock/sun8i-de2.txt @@ -4,13 +4,14 @@ Allwinner Display Engine 2.0 Clock Control Binding Required properties : - compatible: must contain one of the following compatibles: - "allwinner,sun8i-a83t-de2-clk" + - "allwinner,sun8i-h3-de2-clk" - "allwinner,sun8i-v3s-de2-clk" - "allwinner,sun50i-h5-de2-clk" - reg: Must contain the registers base address and length - clocks: phandle to the clocks feeding the display engine subsystem. Three are needed: - - "mod": the display engine module clock + - "mod": the display engine module clock (on A83T it's the DE PLL) - "bus": the bus clock for the whole display engine subsystem - clock-names: Must contain the clock names described just above - resets: phandle to the reset control for the display engine subsystem. @@ -19,7 +20,7 @@ Required properties : Example: de2_clocks: clock@1000000 { - compatible = "allwinner,sun8i-a83t-de2-clk"; + compatible = "allwinner,sun8i-h3-de2-clk"; reg = <0x01000000 0x100000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>;
The DE2 CCU is different on A83T and H3 -- the parent of the clocks on A83T is PLL_DE but on H3 it's the DE module clock. This is not noticed when I develop the DE2 CCU driver. Fix the binding by using different compatibles for A83T and H3, adding notes for the PLL_DE usage on A83T, and change the binding example's compatible from A83T to H3 (as it specifies the DE module clock). Fixes: ed74f8a8a679 ("dt-bindings: add binding for the Allwinner DE2 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- Documentation/devicetree/bindings/clock/sun8i-de2.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)