From patchwork Fri Feb 16 20:41:52 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?q?Heiko_St=C3=BCbner?= X-Patchwork-Id: 10225699 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 8971F60231 for ; Fri, 16 Feb 2018 20:42:38 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 748C4290B4 for ; Fri, 16 Feb 2018 20:42:38 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 6905E29121; Fri, 16 Feb 2018 20:42:38 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-4.2 required=2.0 tests=BAYES_00, RCVD_IN_DNSWL_MED autolearn=ham version=3.3.1 Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 66234290B4 for ; Fri, 16 Feb 2018 20:42:36 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 4718B6E6E1; Fri, 16 Feb 2018 20:42:33 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from gloria.sntech.de (gloria.sntech.de [95.129.55.99]) by gabe.freedesktop.org (Postfix) with ESMTPS id 951B86E6EB for ; Fri, 16 Feb 2018 20:42:20 +0000 (UTC) Received: from ip9234b6d7.dynamic.kabel-deutschland.de ([146.52.182.215] helo=phil.fritz.box) by gloria.sntech.de with esmtpsa (TLS1.1:DHE_RSA_AES_256_CBC_SHA1:256) (Exim 4.80) (envelope-from ) id 1emmpZ-0005wn-DG; Fri, 16 Feb 2018 21:42:05 +0100 From: Heiko Stuebner To: hjc@rock-chips.com, architt@codeaurora.org, a.hajda@samsung.com, kishon@ti.com Subject: [PATCH v2 2/8] phy: add Rockchip Innosilicon hdmi phy Date: Fri, 16 Feb 2018 21:41:52 +0100 Message-Id: <20180216204158.29839-3-heiko@sntech.de> X-Mailer: git-send-email 2.15.1 In-Reply-To: <20180216204158.29839-1-heiko@sntech.de> References: <20180216204158.29839-1-heiko@sntech.de> X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: mark.rutland@arm.com, Jose.Abreu@synopsys.com, algea.cao@rock-chips.com, devicetree@vger.kernel.org, airlied@linux.ie, dri-devel@lists.freedesktop.org, linux-rockchip@lists.infradead.org, robh+dt@kernel.org, Laurent.pinchart@ideasonboard.com, linux-arm-kernel@lists.infradead.org, zhengyang@rock-chips.com MIME-Version: 1.0 Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" X-Virus-Scanned: ClamAV using ClamSMTP From: Zheng Yang Add a driver for the Innosilicon hdmi phy used on rk3228/rk3229 and rk3328 socs from Rockchip. Signed-off-by: Zheng Yang Signed-off-by: Heiko Stuebner --- Patches 1+2 expected to go through the phy-tree drivers/phy/rockchip/Kconfig | 7 + drivers/phy/rockchip/Makefile | 1 + drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 1209 +++++++++++++++++++++++++ 3 files changed, 1217 insertions(+) create mode 100644 drivers/phy/rockchip/phy-rockchip-inno-hdmi.c diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig index f5325b2b679e..41ab78364661 100644 --- a/drivers/phy/rockchip/Kconfig +++ b/drivers/phy/rockchip/Kconfig @@ -15,6 +15,13 @@ config PHY_ROCKCHIP_EMMC help Enable this to support the Rockchip EMMC PHY. +config PHY_ROCKCHIP_INNO_HDMI + tristate "Rockchip INNO HDMI PHY Driver" + depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF + select GENERIC_PHY + help + Enable this to support the Rockchip Innosilicon HDMI PHY. + config PHY_ROCKCHIP_INNO_USB2 tristate "Rockchip INNO USB2PHY Driver" depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile index 7f149d989046..fd21cbaf40dd 100644 --- a/drivers/phy/rockchip/Makefile +++ b/drivers/phy/rockchip/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o +obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c new file mode 100644 index 000000000000..f9ce3fe3ad60 --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c @@ -0,0 +1,1209 @@ +/* + * Copyright (c) 2017 Rockchip Electronics Co. Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define UPDATE(x, h, l) (((x) << (l)) & GENMASK((h), (l))) + +/* REG: 0x00 */ +#define RK3228_PRE_PLL_REFCLK_SEL_PCLK BIT(0) +/* REG: 0x01 */ +#define RK3228_BYPASS_RXSENSE_EN BIT(2) +#define RK3228_BYPASS_PWRON_EN BIT(1) +#define RK3228_BYPASS_PLLPD_EN BIT(0) +/* REG: 0x02 */ +#define RK3228_BYPASS_PDATA_EN BIT(4) +#define RK3228_PDATAEN_DISABLE BIT(0) +/* REG: 0x03 */ +#define RK3228_BYPASS_AUTO_TERM_RES_CAL BIT(7) +#define RK3228_AUTO_TERM_RES_CAL_SPEED_14_8(x) UPDATE(x, 6, 0) +/* REG: 0x04 */ +#define RK3228_AUTO_TERM_RES_CAL_SPEED_7_0(x) UPDATE(x, 7, 0) +/* REG: 0xaa */ +#define RK3228_POST_PLL_CTRL_MANUAL BIT(0) +/* REG: 0xe0 */ +#define RK3228_POST_PLL_POWER_DOWN BIT(5) +#define RK3228_PRE_PLL_POWER_DOWN BIT(4) +#define RK3228_RXSENSE_CLK_CH_ENABLE BIT(3) +#define RK3228_RXSENSE_DATA_CH2_ENABLE BIT(2) +#define RK3228_RXSENSE_DATA_CH1_ENABLE BIT(1) +#define RK3228_RXSENSE_DATA_CH0_ENABLE BIT(0) +/* REG: 0xe1 */ +#define RK3228_BANDGAP_ENABLE BIT(4) +#define RK3228_TMDS_DRIVER_ENABLE GENMASK(3, 0) +/* REG: 0xe2 */ +#define RK3228_PRE_PLL_FB_DIV_8_MASK BIT(7) +#define RK3228_PRE_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7) +#define RK3228_PCLK_VCO_DIV_5_MASK BIT(5) +#define RK3228_PCLK_VCO_DIV_5(x) UPDATE(x, 5, 5) +#define RK3228_PRE_PLL_PRE_DIV_MASK GENMASK(4, 0) +#define RK3228_PRE_PLL_PRE_DIV(x) UPDATE(x, 4, 0) +/* REG: 0xe3 */ +#define RK3228_PRE_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0) +/* REG: 0xe4 */ +#define RK3228_PRE_PLL_PCLK_DIV_B_MASK GENMASK(6, 5) +#define RK3228_PRE_PLL_PCLK_DIV_B(x) UPDATE(x, 6, 5) +#define RK3228_PRE_PLL_PCLK_DIV_A_MASK GENMASK(4, 0) +#define RK3228_PRE_PLL_PCLK_DIV_A(x) UPDATE(x, 4, 0) +/* REG: 0xe5 */ +#define RK3228_PRE_PLL_PCLK_DIV_C_MASK GENMASK(6, 5) +#define RK3228_PRE_PLL_PCLK_DIV_C(x) UPDATE(x, 6, 5) +#define RK3228_PRE_PLL_PCLK_DIV_D_MASK GENMASK(4, 0) +#define RK3228_PRE_PLL_PCLK_DIV_D(x) UPDATE(x, 4, 0) +/* REG: 0xe6 */ +#define RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK GENMASK(5, 4) +#define RK3228_PRE_PLL_TMDSCLK_DIV_C(x) UPDATE(x, 5, 4) +#define RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK GENMASK(3, 2) +#define RK3228_PRE_PLL_TMDSCLK_DIV_A(x) UPDATE(x, 3, 2) +#define RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK GENMASK(1, 0) +#define RK3228_PRE_PLL_TMDSCLK_DIV_B(x) UPDATE(x, 1, 0) +/* REG: 0xe8 */ +#define RK3228_PRE_PLL_LOCK_STATUS BIT(0) +/* REG: 0xe9 */ +#define RK3228_POST_PLL_POST_DIV_ENABLE UPDATE(3, 7, 6) +#define RK3228_POST_PLL_PRE_DIV_MASK GENMASK(4, 0) +#define RK3228_POST_PLL_PRE_DIV(x) UPDATE(x, 4, 0) +/* REG: 0xea */ +#define RK3228_POST_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0) +/* REG: 0xeb */ +#define RK3228_POST_PLL_FB_DIV_8_MASK BIT(7) +#define RK3228_POST_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7) +#define RK3228_POST_PLL_POST_DIV_MASK GENMASK(5, 4) +#define RK3228_POST_PLL_POST_DIV(x) UPDATE(x, 5, 4) +#define RK3228_POST_PLL_LOCK_STATUS BIT(0) +/* REG: 0xee */ +#define RK3228_TMDS_CH_TA_ENABLE GENMASK(7, 4) +/* REG: 0xef */ +#define RK3228_TMDS_CLK_CH_TA(x) UPDATE(x, 7, 6) +#define RK3228_TMDS_DATA_CH2_TA(x) UPDATE(x, 5, 4) +#define RK3228_TMDS_DATA_CH1_TA(x) UPDATE(x, 3, 2) +#define RK3228_TMDS_DATA_CH0_TA(x) UPDATE(x, 1, 0) +/* REG: 0xf0 */ +#define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS_MASK GENMASK(5, 4) +#define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS(x) UPDATE(x, 5, 4) +#define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS_MASK GENMASK(3, 2) +#define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS(x) UPDATE(x, 3, 2) +#define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS_MASK GENMASK(1, 0) +#define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS(x) UPDATE(x, 1, 0) +/* REG: 0xf1 */ +#define RK3228_TMDS_CLK_CH_OUTPUT_SWING(x) UPDATE(x, 7, 4) +#define RK3228_TMDS_DATA_CH2_OUTPUT_SWING(x) UPDATE(x, 3, 0) +/* REG: 0xf2 */ +#define RK3228_TMDS_DATA_CH1_OUTPUT_SWING(x) UPDATE(x, 7, 4) +#define RK3228_TMDS_DATA_CH0_OUTPUT_SWING(x) UPDATE(x, 3, 0) + +/* REG: 0x01 */ +#define RK3328_BYPASS_RXSENSE_EN BIT(2) +#define RK3328_BYPASS_POWERON_EN BIT(1) +#define RK3328_BYPASS_PLLPD_EN BIT(0) +/* REG: 0x02 */ +#define RK3328_INT_POL_HIGH BIT(7) +#define RK3328_BYPASS_PDATA_EN BIT(4) +#define RK3328_PDATA_EN BIT(0) +/* REG:0x05 */ +#define RK3328_INT_TMDS_CLK(x) UPDATE(x, 7, 4) +#define RK3328_INT_TMDS_D2(x) UPDATE(x, 3, 0) +/* REG:0x07 */ +#define RK3328_INT_TMDS_D1(x) UPDATE(x, 7, 4) +#define RK3328_INT_TMDS_D0(x) UPDATE(x, 3, 0) +/* for all RK3328_INT_TMDS_*, ESD_DET as defined in 0xc8-0xcb */ +#define RK3328_INT_AGND_LOW_PULSE_LOCKED BIT(3) +#define RK3328_INT_RXSENSE_LOW_PULSE_LOCKED BIT(2) +#define RK3328_INT_VSS_AGND_ESD_DET BIT(1) +#define RK3328_INT_AGND_VSS_ESD_DET BIT(0) +/* REG: 0xa0 */ +#define RK3328_PCLK_VCO_DIV_5_MASK BIT(1) +#define RK3328_PCLK_VCO_DIV_5(x) UPDATE(x, 1, 1) +#define RK3328_PRE_PLL_POWER_DOWN BIT(0) +/* REG: 0xa1 */ +#define RK3328_PRE_PLL_PRE_DIV_MASK GENMASK(5, 0) +#define RK3328_PRE_PLL_PRE_DIV(x) UPDATE(x, 5, 0) +/* REG: 0xa2 */ +/* unset means center spread */ +#define RK3328_SPREAD_SPECTRUM_MOD_DOWN BIT(7) +#define RK3328_SPREAD_SPECTRUM_MOD_DISABLE BIT(6) +#define RK3328_PRE_PLL_FRAC_DIV_DISABLE UPDATE(3, 5, 4) +#define RK3328_PRE_PLL_FB_DIV_11_8_MASK GENMASK(3, 0) +#define RK3328_PRE_PLL_FB_DIV_11_8(x) UPDATE((x) >> 8, 3, 0) +/* REG: 0xa3 */ +#define RK3328_PRE_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0) +/* REG: 0xa4*/ +#define RK3328_PRE_PLL_TMDSCLK_DIV_C_MASK GENMASK(1, 0) +#define RK3328_PRE_PLL_TMDSCLK_DIV_C(x) UPDATE(x, 1, 0) +#define RK3328_PRE_PLL_TMDSCLK_DIV_B_MASK GENMASK(3, 2) +#define RK3328_PRE_PLL_TMDSCLK_DIV_B(x) UPDATE(x, 3, 2) +#define RK3328_PRE_PLL_TMDSCLK_DIV_A_MASK GENMASK(5, 4) +#define RK3328_PRE_PLL_TMDSCLK_DIV_A(x) UPDATE(x, 5, 4) +/* REG: 0xa5 */ +#define RK3328_PRE_PLL_PCLK_DIV_B_SHIFT 5 +#define RK3328_PRE_PLL_PCLK_DIV_B_MASK GENMASK(6, 5) +#define RK3328_PRE_PLL_PCLK_DIV_B(x) UPDATE(x, 6, 5) +#define RK3328_PRE_PLL_PCLK_DIV_A_MASK GENMASK(4, 0) +#define RK3328_PRE_PLL_PCLK_DIV_A(x) UPDATE(x, 4, 0) +/* REG: 0xa6 */ +#define RK3328_PRE_PLL_PCLK_DIV_C_SHIFT 5 +#define RK3328_PRE_PLL_PCLK_DIV_C_MASK GENMASK(6, 5) +#define RK3328_PRE_PLL_PCLK_DIV_C(x) UPDATE(x, 6, 5) +#define RK3328_PRE_PLL_PCLK_DIV_D_MASK GENMASK(4, 0) +#define RK3328_PRE_PLL_PCLK_DIV_D(x) UPDATE(x, 4, 0) +/* REG: 0xa9 */ +#define RK3328_PRE_PLL_LOCK_STATUS BIT(0) +/* REG: 0xaa */ +#define RK3328_POST_PLL_POST_DIV_ENABLE GENMASK(3, 2) +#define RK3328_POST_PLL_REFCLK_SEL_TMDS BIT(1) +#define RK3328_POST_PLL_POWER_DOWN BIT(0) +/* REG:0xab */ +#define RK3328_POST_PLL_FB_DIV_8(x) UPDATE((x >> 8), 7, 7) +#define RK3328_POST_PLL_PRE_DIV(x) UPDATE(x, 4, 0) +/* REG: 0xac */ +#define RK3328_POST_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0) +/* REG: 0xad */ +#define RK3328_POST_PLL_POST_DIV_MASK GENMASK(1, 0) +#define RK3328_POST_PLL_POST_DIV_2 0x0 +#define RK3328_POST_PLL_POST_DIV_4 0x1 +#define RK3328_POST_PLL_POST_DIV_8 0x3 +/* REG: 0xaf */ +#define RK3328_POST_PLL_LOCK_STATUS BIT(0) +/* REG: 0xb0 */ +#define RK3328_BANDGAP_ENABLE BIT(2) +/* REG: 0xb2 */ +#define RK3328_TMDS_CLK_DRIVER_EN BIT(3) +#define RK3328_TMDS_D2_DRIVER_EN BIT(2) +#define RK3328_TMDS_D1_DRIVER_EN BIT(1) +#define RK3328_TMDS_D0_DRIVER_EN BIT(0) +#define RK3328_TMDS_DRIVER_ENABLE (RK3328_TMDS_CLK_DRIVER_EN | \ + RK3328_TMDS_D2_DRIVER_EN | \ + RK3328_TMDS_D1_DRIVER_EN | \ + RK3328_TMDS_D0_DRIVER_EN) +/* REG:0xc5 */ +#define RK3328_BYPASS_TERM_RESISTOR_CALIB BIT(7) +#define RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(x) UPDATE((x) >> 8, 6, 0) +/* REG:0xc6 */ +#define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x) UPDATE(x, 7, 9) +/* REG:0xc7 */ +#define RK3328_TERM_RESISTOR_50 UPDATE(0, 2, 1) +#define RK3328_TERM_RESISTOR_62_5 UPDATE(1, 2, 1) +#define RK3328_TERM_RESISTOR_75 UPDATE(2, 2, 1) +#define RK3328_TERM_RESISTOR_100 UPDATE(3, 2, 1) +/* REG 0xc8 - 0xcb */ +#define RK3328_ESD_DETECT_MASK GENMASK(7, 6) +#define RK3328_ESD_DETECT_340MV (0 << 6) +#define RK3328_ESD_DETECT_280MV (1 << 6) +#define RK3328_ESD_DETECT_260MV (2 << 6) +#define RK3328_ESD_DETECT_240MV (3 << 6) +/* resistors can be used in parallel */ +#define RK3328_TMDS_TERM_RESIST_MASK GENMASK(5, 0) +#define RK3328_TMDS_TERM_RESIST_75 BIT(5) +#define RK3328_TMDS_TERM_RESIST_150 BIT(4) +#define RK3328_TMDS_TERM_RESIST_300 BIT(3) +#define RK3328_TMDS_TERM_RESIST_600 BIT(2) +#define RK3328_TMDS_TERM_RESIST_1000 BIT(1) +#define RK3328_TMDS_TERM_RESIST_2000 BIT(0) +/* REG: 0xd1 */ +#define RK3328_PRE_PLL_FRAC_DIV_23_16(x) UPDATE((x) >> 16, 7, 0) +/* REG: 0xd2 */ +#define RK3328_PRE_PLL_FRAC_DIV_15_8(x) UPDATE((x) >> 8, 7, 0) +/* REG: 0xd3 */ +#define RK3328_PRE_PLL_FRAC_DIV_7_0(x) UPDATE(x, 7, 0) + +struct inno_hdmi_phy_drv_data; + +struct inno_hdmi_phy { + struct device *dev; + struct regmap *regmap; + int irq; + + struct phy *phy; + struct clk *sysclk; + + /* platform data */ + struct inno_hdmi_phy_drv_data *plat_data; + int chip_version; + + /* clk provider */ + struct clk_hw hw; + struct clk *phyclk; + unsigned long pixclock; +}; + +struct pre_pll_config { + unsigned long pixclock; + unsigned long tmdsclock; + u8 prediv; + u16 fbdiv; + u8 tmds_div_a; + u8 tmds_div_b; + u8 tmds_div_c; + u8 pclk_div_a; + u8 pclk_div_b; + u8 pclk_div_c; + u8 pclk_div_d; + u8 vco_div_5_en; + u32 fracdiv; +}; + +struct post_pll_config { + unsigned long tmdsclock; + u8 prediv; + u16 fbdiv; + u8 postdiv; + u8 version; +}; + +struct phy_config { + unsigned long tmdsclock; + u8 regs[14]; +}; + +struct inno_hdmi_phy_ops { + int (*init)(struct inno_hdmi_phy *inno); + int (*power_on)(struct inno_hdmi_phy *inno, + const struct post_pll_config *cfg, + const struct phy_config *phy_cfg); + void (*power_off)(struct inno_hdmi_phy *inno); +}; + +struct inno_hdmi_phy_drv_data { + const struct inno_hdmi_phy_ops *ops; + const struct clk_ops *clk_ops; + const struct phy_config *phy_cfg_table; +}; + +static const struct pre_pll_config pre_pll_cfg_table[] = { + { 27000000, 27000000, 1, 90, 3, 2, 2, 10, 3, 3, 4, 0, 0}, + { 27000000, 33750000, 1, 90, 1, 3, 3, 10, 3, 3, 4, 0, 0}, + { 40000000, 40000000, 1, 80, 2, 2, 2, 12, 2, 2, 2, 0, 0}, + { 59341000, 59341000, 1, 98, 3, 1, 2, 1, 3, 3, 4, 0, 0xE6AE6B}, + { 59400000, 59400000, 1, 99, 3, 1, 1, 1, 3, 3, 4, 0, 0}, + { 59341000, 74176250, 1, 98, 0, 3, 3, 1, 3, 3, 4, 0, 0xE6AE6B}, + { 59400000, 74250000, 1, 99, 1, 2, 2, 1, 3, 3, 4, 0, 0}, + { 74176000, 74176000, 1, 98, 1, 2, 2, 1, 2, 3, 4, 0, 0xE6AE6B}, + { 74250000, 74250000, 1, 99, 1, 2, 2, 1, 2, 3, 4, 0, 0}, + { 74176000, 92720000, 4, 494, 1, 2, 2, 1, 3, 3, 4, 0, 0x816817}, + { 74250000, 92812500, 4, 495, 1, 2, 2, 1, 3, 3, 4, 0, 0}, + {148352000, 148352000, 1, 98, 1, 1, 1, 1, 2, 2, 2, 0, 0xE6AE6B}, + {148500000, 148500000, 1, 99, 1, 1, 1, 1, 2, 2, 2, 0, 0}, + {148352000, 185440000, 4, 494, 0, 2, 2, 1, 3, 2, 2, 0, 0x816817}, + {148500000, 185625000, 4, 495, 0, 2, 2, 1, 3, 2, 2, 0, 0}, + {296703000, 296703000, 1, 98, 0, 1, 1, 1, 0, 2, 2, 0, 0xE6AE6B}, + {297000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 2, 0, 0}, + {296703000, 370878750, 4, 494, 1, 2, 0, 1, 3, 1, 1, 0, 0x816817}, + {297000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 0, 0}, + {593407000, 296703500, 1, 98, 0, 1, 1, 1, 0, 2, 1, 0, 0xE6AE6B}, + {594000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 1, 0, 0}, + {593407000, 370879375, 4, 494, 1, 2, 0, 1, 3, 1, 1, 1, 0x816817}, + {594000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 1, 0}, + {593407000, 593407000, 1, 98, 0, 2, 0, 1, 0, 1, 1, 0, 0xE6AE6B}, + {594000000, 594000000, 1, 99, 0, 2, 0, 1, 0, 1, 1, 0, 0}, + { /* sentinel */ } +}; + +static const struct post_pll_config post_pll_cfg_table[] = { + {33750000, 1, 40, 8, 1}, + {33750000, 1, 80, 8, 2}, + {74250000, 1, 40, 8, 1}, + {74250000, 18, 80, 8, 2}, + {148500000, 2, 40, 4, 3}, + {297000000, 4, 40, 2, 3}, + {594000000, 8, 40, 1, 3}, + { /* sentinel */ } +}; + +static const struct phy_config rk3228_phy_cfg[] = { + { 165000000, { + 0xaa, 0x00, 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + }, + }, { + 340000000, { + 0xaa, 0x15, 0x6a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + }, + }, { + 594000000, { + 0xaa, 0x15, 0x7a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + }, + }, { /* sentinel */ }, +}; + +static const struct phy_config rk3328_phy_cfg[] = { + { 165000000, { + 0x07, 0x0a, 0x0a, 0x0a, 0x00, 0x00, 0x08, 0x08, 0x08, + 0x00, 0xac, 0xcc, 0xcc, 0xcc, + }, + }, { + 340000000, { + 0x0b, 0x0d, 0x0d, 0x0d, 0x07, 0x15, 0x08, 0x08, 0x08, + 0x3f, 0xac, 0xcc, 0xcd, 0xdd, + }, + }, { + 594000000, { + 0x10, 0x1a, 0x1a, 0x1a, 0x07, 0x15, 0x08, 0x08, 0x08, + 0x00, 0xac, 0xcc, 0xcc, 0xcc, + }, + }, { /* sentinel */ }, +}; + +static inline struct inno_hdmi_phy *to_inno_hdmi_phy(struct clk_hw *hw) +{ + return container_of(hw, struct inno_hdmi_phy, hw); +} + +/* + * The register description of the IP block does not use any distinct names + * but instead the databook simply numbers the registers in one-increments. + * As the registers are obviously 32bit sized, the inno_* functions + * translate the databook register names to the actual registers addresses. + */ +static inline void inno_write(struct inno_hdmi_phy *inno, u32 reg, u8 val) +{ + regmap_write(inno->regmap, reg * 4, val); +} + +static inline u8 inno_read(struct inno_hdmi_phy *inno, u32 reg) +{ + u32 val; + + regmap_read(inno->regmap, reg * 4, &val); + + return val; +} + +static inline void inno_update_bits(struct inno_hdmi_phy *inno, u8 reg, + u8 mask, u8 val) +{ + regmap_update_bits(inno->regmap, reg * 4, mask, val); +} + +#define inno_poll(inno, reg, val, cond, sleep_us, timeout_us) \ + regmap_read_poll_timeout(inno->regmap, reg * 4, val, cond, \ + sleep_us, timeout_us) + +static unsigned long inno_hdmi_phy_get_tmdsclk(struct inno_hdmi_phy *inno, + unsigned long rate) +{ + int bus_width = phy_get_bus_width(inno->phy); + + switch (bus_width) { + case 4: + case 5: + case 6: + case 10: + case 12: + case 16: + return (u64)rate * bus_width / 8; + default: + return rate; + } +} + +static irqreturn_t inno_hdmi_phy_rk3328_hardirq(int irq, void *dev_id) +{ + struct inno_hdmi_phy *inno = dev_id; + int intr_stat1, intr_stat2, intr_stat3; + + intr_stat1 = inno_read(inno, 0x04); + intr_stat2 = inno_read(inno, 0x06); + intr_stat3 = inno_read(inno, 0x08); + + if (intr_stat1) + inno_write(inno, 0x04, intr_stat1); + if (intr_stat2) + inno_write(inno, 0x06, intr_stat2); + if (intr_stat3) + inno_write(inno, 0x08, intr_stat3); + + if (intr_stat1 || intr_stat2 || intr_stat3) + return IRQ_WAKE_THREAD; + + return IRQ_HANDLED; +} + +static irqreturn_t inno_hdmi_phy_rk3328_irq(int irq, void *dev_id) +{ + struct inno_hdmi_phy *inno = dev_id; + + inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0); + usleep_range(9, 10); + inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN); + + return IRQ_HANDLED; +} + +static int inno_hdmi_phy_power_on(struct phy *phy) +{ + struct inno_hdmi_phy *inno = phy_get_drvdata(phy); + const struct post_pll_config *cfg = post_pll_cfg_table; + const struct phy_config *phy_cfg = inno->plat_data->phy_cfg_table; + unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, + inno->pixclock); + int ret; + + if (!tmdsclock) { + dev_err(inno->dev, "TMDS clock is zero!\n"); + return -EINVAL; + } + + if (!inno->plat_data->ops->power_on) + return -EINVAL; + + for (; cfg->tmdsclock != 0; cfg++) + if (tmdsclock <= cfg->tmdsclock && + cfg->version & inno->chip_version) + break; + + for (; phy_cfg->tmdsclock != 0; phy_cfg++) + if (tmdsclock <= phy_cfg->tmdsclock) + break; + + if (cfg->tmdsclock == 0 || phy_cfg->tmdsclock == 0) + return -EINVAL; + + dev_dbg(inno->dev, "Inno HDMI PHY Power On\n"); + + ret = clk_prepare_enable(inno->phyclk); + if (ret) + return ret; + + ret = inno->plat_data->ops->power_on(inno, cfg, phy_cfg); + if (ret) { + clk_disable_unprepare(inno->phyclk); + return ret; + } + + return 0; +} + +static int inno_hdmi_phy_power_off(struct phy *phy) +{ + struct inno_hdmi_phy *inno = phy_get_drvdata(phy); + + if (!inno->plat_data->ops->power_off) + return -EINVAL; + + inno->plat_data->ops->power_off(inno); + + clk_disable_unprepare(inno->phyclk); + + dev_dbg(inno->dev, "Inno HDMI PHY Power Off\n"); + + return 0; +} + +static const struct phy_ops inno_hdmi_phy_ops = { + .owner = THIS_MODULE, + .power_on = inno_hdmi_phy_power_on, + .power_off = inno_hdmi_phy_power_off, +}; + +static const struct pre_pll_config *inno_hdmi_phy_get_pre_pll_cfg( + struct inno_hdmi_phy *inno, unsigned long rate) +{ + const struct pre_pll_config *cfg = pre_pll_cfg_table; + unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate); + + for (; cfg->pixclock != 0; cfg++) + if (cfg->pixclock == rate && cfg->tmdsclock == tmdsclock) + break; + + if (cfg->pixclock == 0) + return ERR_PTR(-EINVAL); + + return cfg; +} + +static long inno_hdmi_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); + const struct pre_pll_config *cfg; + + cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate); + if (IS_ERR(cfg)) + return PTR_ERR(cfg); + + return cfg->pixclock; +} + +static int inno_hdmi_phy_rk3228_clk_is_prepared(struct clk_hw *hw) +{ + struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); + u8 status; + + status = inno_read(inno, 0xe0) & RK3228_PRE_PLL_POWER_DOWN; + return status ? 0 : 1; +} + +static int inno_hdmi_phy_rk3228_clk_prepare(struct clk_hw *hw) +{ + struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); + + inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0); + return 0; +} + +static void inno_hdmi_phy_rk3228_clk_unprepare(struct clk_hw *hw) +{ + struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); + + inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, + RK3228_PRE_PLL_POWER_DOWN); +} + +static unsigned long inno_hdmi_phy_rk3228_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); + + return inno->pixclock; +} + +static int inno_hdmi_phy_rk3228_clk_set_rate(struct clk_hw *hw, + unsigned long rate, unsigned long parent_rate) +{ + struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); + const struct pre_pll_config *cfg = pre_pll_cfg_table; + unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate); + u32 v; + int ret; + + dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n", + __func__, rate, tmdsclock); + + cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate); + if (IS_ERR(cfg)) + return PTR_ERR(cfg); + + /* Power down PRE-PLL */ + inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, + RK3228_PRE_PLL_POWER_DOWN); + + inno_update_bits(inno, 0xe2, RK3228_PRE_PLL_FB_DIV_8_MASK | + RK3228_PCLK_VCO_DIV_5_MASK | + RK3228_PRE_PLL_PRE_DIV_MASK, + RK3228_PRE_PLL_FB_DIV_8(cfg->fbdiv) | + RK3228_PCLK_VCO_DIV_5(cfg->vco_div_5_en) | + RK3228_PRE_PLL_PRE_DIV(cfg->prediv)); + inno_write(inno, 0xe3, RK3228_PRE_PLL_FB_DIV_7_0(cfg->fbdiv)); + inno_update_bits(inno, 0xe4, RK3228_PRE_PLL_PCLK_DIV_B_MASK | + RK3228_PRE_PLL_PCLK_DIV_A_MASK, + RK3228_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b) | + RK3228_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a)); + inno_update_bits(inno, 0xe5, RK3228_PRE_PLL_PCLK_DIV_C_MASK | + RK3228_PRE_PLL_PCLK_DIV_D_MASK, + RK3228_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) | + RK3228_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d)); + inno_update_bits(inno, 0xe6, RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK | + RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK | + RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK, + RK3228_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) | + RK3228_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) | + RK3228_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b)); + + /* Power up PRE-PLL */ + inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0); + + /* Wait for Pre-PLL lock */ + ret = inno_poll(inno, 0xe8, v, v & RK3228_PRE_PLL_LOCK_STATUS, + 100, 100000); + if (ret) { + dev_err(inno->dev, "Pre-PLL locking failed\n"); + return ret; + } + + inno->pixclock = rate; + + return 0; +} + +static const struct clk_ops inno_hdmi_phy_rk3228_clk_ops = { + .prepare = inno_hdmi_phy_rk3228_clk_prepare, + .unprepare = inno_hdmi_phy_rk3228_clk_unprepare, + .is_prepared = inno_hdmi_phy_rk3228_clk_is_prepared, + .recalc_rate = inno_hdmi_phy_rk3228_clk_recalc_rate, + .round_rate = inno_hdmi_phy_clk_round_rate, + .set_rate = inno_hdmi_phy_rk3228_clk_set_rate, +}; + +static int inno_hdmi_phy_rk3328_clk_is_prepared(struct clk_hw *hw) +{ + struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); + u8 status; + + status = inno_read(inno, 0xa0) & RK3328_PRE_PLL_POWER_DOWN; + return status ? 0 : 1; +} + +static int inno_hdmi_phy_rk3328_clk_prepare(struct clk_hw *hw) +{ + struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); + + inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0); + return 0; +} + +static void inno_hdmi_phy_rk3328_clk_unprepare(struct clk_hw *hw) +{ + struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); + + inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, + RK3328_PRE_PLL_POWER_DOWN); +} + +static unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); + unsigned long rate, vco, frac; + u8 nd, no_a, no_b, no_c, no_d; + u16 nf; + + nd = inno_read(inno, 0xa1) & RK3328_PRE_PLL_PRE_DIV_MASK; + nf = ((inno_read(inno, 0xa2) & RK3328_PRE_PLL_FB_DIV_11_8_MASK) << 8); + nf |= inno_read(inno, 0xa3); + vco = parent_rate * nf; + + if (!(inno_read(inno, 0xa2) & RK3328_PRE_PLL_FRAC_DIV_DISABLE)) { + frac = inno_read(inno, 0xd3) | + (inno_read(inno, 0xd2) << 8) | + (inno_read(inno, 0xd1) << 16); + vco += DIV_ROUND_CLOSEST(parent_rate * frac, (1 << 24)); + } + + if (inno_read(inno, 0xa0) & RK3328_PCLK_VCO_DIV_5_MASK) { + rate = vco / (nd * 5); + } else { + no_a = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_A_MASK; + no_b = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_B_MASK; + no_b >>= RK3328_PRE_PLL_PCLK_DIV_B_SHIFT; + no_b += 2; + no_c = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_C_MASK; + no_c >>= RK3328_PRE_PLL_PCLK_DIV_C_SHIFT; + no_c = 1 << no_c; + no_d = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_D_MASK; + + rate = vco / (nd * (no_a == 1 ? no_b : no_a) * no_d * 2); + } + + inno->pixclock = rate; + dev_dbg(inno->dev, "%s rate %lu\n", __func__, inno->pixclock); + + return rate; +} + +static int inno_hdmi_phy_rk3328_clk_set_rate(struct clk_hw *hw, + unsigned long rate, unsigned long parent_rate) +{ + struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw); + const struct pre_pll_config *cfg = pre_pll_cfg_table; + unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate); + u32 val; + int ret; + + dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n", + __func__, rate, tmdsclock); + + cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate); + if (IS_ERR(cfg)) + return PTR_ERR(cfg); + + inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, + RK3328_PRE_PLL_POWER_DOWN); + + /* Configure pre-pll */ + inno_update_bits(inno, 0xa0, RK3228_PCLK_VCO_DIV_5_MASK, + RK3228_PCLK_VCO_DIV_5(cfg->vco_div_5_en)); + inno_write(inno, 0xa1, RK3328_PRE_PLL_PRE_DIV(cfg->prediv)); + + val = RK3328_SPREAD_SPECTRUM_MOD_DISABLE; + if (!cfg->fracdiv) + val |= RK3328_PRE_PLL_FRAC_DIV_DISABLE; + inno_write(inno, 0xa2, RK3328_PRE_PLL_FB_DIV_11_8(cfg->fbdiv) | val); + inno_write(inno, 0xa3, RK3328_PRE_PLL_FB_DIV_7_0(cfg->fbdiv)); + inno_write(inno, 0xa5, RK3328_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a) | + RK3328_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b)); + inno_write(inno, 0xa6, RK3328_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) | + RK3328_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d)); + inno_write(inno, 0xa4, RK3328_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) | + RK3328_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) | + RK3328_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b)); + inno_write(inno, 0xd3, RK3328_PRE_PLL_FRAC_DIV_7_0(cfg->fracdiv)); + inno_write(inno, 0xd2, RK3328_PRE_PLL_FRAC_DIV_15_8(cfg->fracdiv)); + inno_write(inno, 0xd1, RK3328_PRE_PLL_FRAC_DIV_23_16(cfg->fracdiv)); + + inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0); + + /* Wait for Pre-PLL lock */ + ret = inno_poll(inno, 0xa9, val, val & RK3328_PRE_PLL_LOCK_STATUS, + 1000, 10000); + if (ret) { + dev_err(inno->dev, "Pre-PLL locking failed\n"); + return ret; + } + + inno->pixclock = rate; + + return 0; +} + +static const struct clk_ops inno_hdmi_phy_rk3328_clk_ops = { + .prepare = inno_hdmi_phy_rk3328_clk_prepare, + .unprepare = inno_hdmi_phy_rk3328_clk_unprepare, + .is_prepared = inno_hdmi_phy_rk3328_clk_is_prepared, + .recalc_rate = inno_hdmi_phy_rk3328_clk_recalc_rate, + .round_rate = inno_hdmi_phy_clk_round_rate, + .set_rate = inno_hdmi_phy_rk3328_clk_set_rate, +}; + +static int inno_hdmi_phy_clk_register(struct inno_hdmi_phy *inno) +{ + struct device *dev = inno->dev; + struct device_node *np = dev->of_node; + struct clk_init_data init; + struct clk *refclk; + const char *parent_name; + int ret; + + refclk = devm_clk_get(dev, "refclk"); + if (IS_ERR(refclk)) { + dev_err(dev, "failed to get ref clock\n"); + return PTR_ERR(refclk); + } + + parent_name = __clk_get_name(refclk); + + init.parent_names = &parent_name; + init.num_parents = 1; + init.flags = 0; + init.name = "pin_hd20_pclk"; + init.ops = inno->plat_data->clk_ops; + + /* optional override of the clock name */ + of_property_read_string(np, "clock-output-names", &init.name); + + inno->hw.init = &init; + + inno->phyclk = devm_clk_register(dev, &inno->hw); + if (IS_ERR(inno->phyclk)) { + ret = PTR_ERR(inno->phyclk); + dev_err(dev, "failed to register clock: %d\n", ret); + return ret; + } + + ret = of_clk_add_provider(np, of_clk_src_simple_get, inno->phyclk); + if (ret) { + dev_err(dev, "failed to register clock provider: %d\n", ret); + return ret; + } + + return 0; +} + +static int inno_hdmi_phy_rk3228_init(struct inno_hdmi_phy *inno) +{ + /* + * Use phy internal register control + * rxsense/poweron/pllpd/pdataen signal. + */ + inno_write(inno, 0x01, RK3228_BYPASS_RXSENSE_EN | + RK3228_BYPASS_PWRON_EN | + RK3228_BYPASS_PLLPD_EN); + inno_update_bits(inno, 0x02, RK3228_BYPASS_PDATA_EN, + RK3228_BYPASS_PDATA_EN); + + /* manual power down post-PLL */ + inno_update_bits(inno, 0xaa, RK3228_POST_PLL_CTRL_MANUAL, + RK3228_POST_PLL_CTRL_MANUAL); + + inno->chip_version = 1; + + return 0; +} + +static int +inno_hdmi_phy_rk3228_power_on(struct inno_hdmi_phy *inno, + const struct post_pll_config *cfg, + const struct phy_config *phy_cfg) +{ + int ret; + u32 v; + + inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE, + RK3228_PDATAEN_DISABLE); + inno_update_bits(inno, 0xe0, RK3228_POST_PLL_POWER_DOWN, + RK3228_POST_PLL_POWER_DOWN); + + /* Post-PLL update */ + inno_update_bits(inno, 0xe9, RK3228_POST_PLL_PRE_DIV_MASK, + RK3228_POST_PLL_PRE_DIV(cfg->prediv)); + inno_update_bits(inno, 0xeb, RK3228_POST_PLL_FB_DIV_8_MASK, + RK3228_POST_PLL_FB_DIV_8(cfg->fbdiv)); + inno_write(inno, 0xea, RK3228_POST_PLL_FB_DIV_7_0(cfg->fbdiv)); + + if (cfg->postdiv == 1) { + inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE, + 0); + } else { + inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE, + RK3228_POST_PLL_POST_DIV_ENABLE); + inno_update_bits(inno, 0xeb, RK3228_POST_PLL_POST_DIV_MASK, + RK3228_POST_PLL_POST_DIV(cfg->postdiv / 2 - 1)); + } + + for (v = 0; v < 4; v++) + inno_write(inno, 0xef + v, phy_cfg->regs[v]); + + inno_update_bits(inno, 0xe0, RK3228_POST_PLL_POWER_DOWN, 0); + inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE, + RK3228_BANDGAP_ENABLE); + inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE, + RK3228_TMDS_DRIVER_ENABLE); + + /* Wait for post PLL lock */ + ret = inno_poll(inno, 0xeb, v, v & RK3228_POST_PLL_LOCK_STATUS, + 100, 100000); + if (ret) { + dev_err(inno->dev, "Post-PLL locking failed\n"); + return ret; + } + + if (cfg->tmdsclock > 340000000) + msleep(100); + + inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE, 0); + return 0; +} + +static void inno_hdmi_phy_rk3228_power_off(struct inno_hdmi_phy *inno) +{ + inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE, 0); + inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE, 0); + inno_update_bits(inno, 0xe0, RK3228_POST_PLL_POWER_DOWN, + RK3228_POST_PLL_POWER_DOWN); +} + +static const struct inno_hdmi_phy_ops rk3228_hdmi_phy_ops = { + .init = inno_hdmi_phy_rk3228_init, + .power_on = inno_hdmi_phy_rk3228_power_on, + .power_off = inno_hdmi_phy_rk3228_power_off, +}; + +static int inno_hdmi_phy_rk3328_init(struct inno_hdmi_phy *inno) +{ + struct nvmem_cell *cell; + unsigned char *efuse_buf; + size_t len; + + /* + * Use phy internal register control + * rxsense/poweron/pllpd/pdataen signal. + */ + inno_write(inno, 0x01, RK3328_BYPASS_RXSENSE_EN | + RK3328_BYPASS_POWERON_EN | + RK3328_BYPASS_PLLPD_EN); + inno_write(inno, 0x02, RK3328_INT_POL_HIGH | RK3328_BYPASS_PDATA_EN | + RK3328_PDATA_EN); + + /* Disable phy irq */ + inno_write(inno, 0x05, 0); + inno_write(inno, 0x07, 0); + + /* try to read the chip-version */ + inno->chip_version = 1; + cell = nvmem_cell_get(inno->dev, "cpu-version"); + if (IS_ERR(cell)) { + if (PTR_ERR(cell) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + return 0; + } + + efuse_buf = nvmem_cell_read(cell, &len); + nvmem_cell_put(cell); + + if (IS_ERR(efuse_buf)) + return 0; + if (len == 1) + inno->chip_version = efuse_buf[0] + 1; + kfree(efuse_buf); + + return 0; +} + +static int +inno_hdmi_phy_rk3328_power_on(struct inno_hdmi_phy *inno, + const struct post_pll_config *cfg, + const struct phy_config *phy_cfg) +{ + int ret; + u32 v; + + inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0); + inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN, + RK3328_POST_PLL_POWER_DOWN); + + inno_write(inno, 0xac, RK3328_POST_PLL_FB_DIV_7_0(cfg->fbdiv)); + if (cfg->postdiv == 1) { + inno_write(inno, 0xaa, RK3328_POST_PLL_REFCLK_SEL_TMDS); + inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) | + RK3328_POST_PLL_PRE_DIV(cfg->prediv)); + } else { + v = (cfg->postdiv / 2) - 1; + v &= RK3328_POST_PLL_POST_DIV_MASK; + inno_write(inno, 0xad, v); + inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) | + RK3328_POST_PLL_PRE_DIV(cfg->prediv)); + inno_write(inno, 0xaa, RK3328_POST_PLL_POST_DIV_ENABLE | + RK3328_POST_PLL_REFCLK_SEL_TMDS); + } + + for (v = 0; v < 14; v++) + inno_write(inno, 0xb5 + v, phy_cfg->regs[v]); + + /* set ESD detection threshold for TMDS CLK, D2, D1 and D0 */ + for (v = 0; v < 4; v++) + inno_update_bits(inno, 0xc8 + v, RK3328_ESD_DETECT_MASK, + RK3328_ESD_DETECT_340MV); + + if (phy_cfg->tmdsclock > 340000000) { + /* Set termination resistor to 100ohm */ + v = clk_get_rate(inno->sysclk) / 100000; + inno_write(inno, 0xc5, RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(v) + | RK3328_BYPASS_TERM_RESISTOR_CALIB); + inno_write(inno, 0xc6, RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(v)); + inno_write(inno, 0xc7, RK3328_TERM_RESISTOR_100); + inno_update_bits(inno, 0xc5, + RK3328_BYPASS_TERM_RESISTOR_CALIB, 0); + } else { + inno_write(inno, 0xc5, RK3328_BYPASS_TERM_RESISTOR_CALIB); + + /* clk termination resistor is 50ohm (parallel resistors) */ + if (phy_cfg->tmdsclock > 165000000) + inno_update_bits(inno, 0xc8, + RK3328_TMDS_TERM_RESIST_MASK, + RK3328_TMDS_TERM_RESIST_75 | + RK3328_TMDS_TERM_RESIST_150); + + /* data termination resistor for D2, D1 and D0 is 150ohm */ + for (v = 0; v < 3; v++) + inno_update_bits(inno, 0xc9 + v, + RK3328_TMDS_TERM_RESIST_MASK, + RK3328_TMDS_TERM_RESIST_150); + } + + inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN, 0); + inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE, + RK3328_BANDGAP_ENABLE); + inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE, + RK3328_TMDS_DRIVER_ENABLE); + + /* Wait for post PLL lock */ + ret = inno_poll(inno, 0xaf, v, v & RK3328_POST_PLL_LOCK_STATUS, + 1000, 10000); + if (ret) { + dev_err(inno->dev, "Post-PLL locking failed\n"); + return ret; + } + + if (phy_cfg->tmdsclock > 340000000) + msleep(100); + + inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN); + + /* Enable PHY IRQ */ + inno_write(inno, 0x05, RK3328_INT_TMDS_CLK(RK3328_INT_VSS_AGND_ESD_DET) + | RK3328_INT_TMDS_D2(RK3328_INT_VSS_AGND_ESD_DET)); + inno_write(inno, 0x07, RK3328_INT_TMDS_D1(RK3328_INT_VSS_AGND_ESD_DET) + | RK3328_INT_TMDS_D0(RK3328_INT_VSS_AGND_ESD_DET)); + return 0; +} + +static void inno_hdmi_phy_rk3328_power_off(struct inno_hdmi_phy *inno) +{ + inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE, 0); + inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE, 0); + inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN, + RK3328_POST_PLL_POWER_DOWN); + + /* Disable PHY IRQ */ + inno_write(inno, 0x05, 0); + inno_write(inno, 0x07, 0); +} + +static const struct inno_hdmi_phy_ops rk3328_hdmi_phy_ops = { + .init = inno_hdmi_phy_rk3328_init, + .power_on = inno_hdmi_phy_rk3328_power_on, + .power_off = inno_hdmi_phy_rk3328_power_off, +}; + +static const struct inno_hdmi_phy_drv_data rk3228_hdmi_phy_drv_data = { + .ops = &rk3228_hdmi_phy_ops, + .clk_ops = &inno_hdmi_phy_rk3228_clk_ops, + .phy_cfg_table = rk3228_phy_cfg, +}; + +static const struct inno_hdmi_phy_drv_data rk3328_hdmi_phy_drv_data = { + .ops = &rk3328_hdmi_phy_ops, + .clk_ops = &inno_hdmi_phy_rk3328_clk_ops, + .phy_cfg_table = rk3328_phy_cfg, +}; + +static const struct regmap_config inno_hdmi_phy_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = 0x400, +}; + +static void inno_hdmi_phy_action(void *data) +{ + struct inno_hdmi_phy *inno = data; + + clk_disable_unprepare(inno->sysclk); +} + +static int inno_hdmi_phy_probe(struct platform_device *pdev) +{ + struct inno_hdmi_phy *inno; + const struct of_device_id *match; + struct phy_provider *phy_provider; + struct resource *res; + void __iomem *regs; + int ret; + + inno = devm_kzalloc(&pdev->dev, sizeof(*inno), GFP_KERNEL); + if (!inno) + return -ENOMEM; + + inno->dev = &pdev->dev; + + match = of_match_device(inno->dev->driver->of_match_table, inno->dev); + inno->plat_data = (struct inno_hdmi_phy_drv_data *)match->data; + if (!inno->plat_data || !inno->plat_data->ops) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(inno->dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + inno->sysclk = devm_clk_get(inno->dev, "sysclk"); + if (IS_ERR(inno->sysclk)) { + ret = PTR_ERR(inno->sysclk); + dev_err(inno->dev, "Unable to get inno phy sysclk: %d\n", ret); + return ret; + } + ret = clk_prepare_enable(inno->sysclk); + if (ret) { + dev_err(inno->dev, "Cannot enable inno phy sysclk: %d\n", ret); + return ret; + } + + ret = devm_add_action_or_reset(inno->dev, inno_hdmi_phy_action, + inno); + if (ret) { + clk_disable_unprepare(inno->sysclk); + return ret; + } + + inno->regmap = devm_regmap_init_mmio(inno->dev, regs, + &inno_hdmi_phy_regmap_config); + if (IS_ERR(inno->regmap)) + return PTR_ERR(inno->regmap); + + /* only the newer rk3328 hdmiphy has an interrupt */ + inno->irq = platform_get_irq(pdev, 0); + if (inno->irq > 0) { + ret = devm_request_threaded_irq(inno->dev, inno->irq, + inno_hdmi_phy_rk3328_hardirq, + inno_hdmi_phy_rk3328_irq, IRQF_SHARED, + dev_name(inno->dev), inno); + if (ret) + return ret; + } + + inno->phy = devm_phy_create(inno->dev, NULL, &inno_hdmi_phy_ops); + if (IS_ERR(inno->phy)) { + dev_err(inno->dev, "failed to create HDMI PHY\n"); + return PTR_ERR(inno->phy); + } + + phy_set_drvdata(inno->phy, inno); + phy_set_bus_width(inno->phy, 8); + + if (inno->plat_data->ops->init) { + ret = inno->plat_data->ops->init(inno); + if (ret) + return ret; + } + + ret = inno_hdmi_phy_clk_register(inno); + if (ret) + return ret; + + phy_provider = devm_of_phy_provider_register(inno->dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + dev_err(inno->dev, "failed to register PHY provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static int inno_hdmi_phy_remove(struct platform_device *pdev) +{ + of_clk_del_provider(pdev->dev.of_node); + + return 0; +} + +static const struct of_device_id inno_hdmi_phy_of_match[] = { + { + .compatible = "rockchip,rk3228-hdmi-phy", + .data = &rk3228_hdmi_phy_drv_data + }, { + .compatible = "rockchip,rk3328-hdmi-phy", + .data = &rk3328_hdmi_phy_drv_data + }, { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, inno_hdmi_phy_of_match); + +static struct platform_driver inno_hdmi_phy_driver = { + .probe = inno_hdmi_phy_probe, + .remove = inno_hdmi_phy_remove, + .driver = { + .name = "inno-hdmi-phy", + .of_match_table = of_match_ptr(inno_hdmi_phy_of_match), + }, +}; +module_platform_driver(inno_hdmi_phy_driver); + +MODULE_AUTHOR("Zheng Yang "); +MODULE_DESCRIPTION("Innosilion HDMI 2.0 Transmitter PHY Driver"); +MODULE_LICENSE("GPL v2");