diff mbox

[v3,2/6] drm/rockchip: dw_hdmi: Allow outputs that don't need output switching

Message ID 20180515134736.5824-3-heiko@sntech.de (mailing list archive)
State New, archived
Headers show

Commit Message

Heiko Stübner May 15, 2018, 1:47 p.m. UTC 
So far we always encountered socs with 2 output crtcs needing the driver
to tell the hdmi block which output to connect to. But there also exist
socs with only one crtc like the rk3228, rk3328 and rk3368.

So adapt the register field to simply carry a negative value to signal
that no output-switching is necessary.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
---
changes in v3:
- fixed wording issue found by Robin Murphy

 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 11309a2a4e43..b09c3531305b 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -36,7 +36,7 @@ 
  * @lcdsel_lit: reg value of selecting vop little for HDMI
  */
 struct rockchip_hdmi_chip_data {
-	u32	lcdsel_grf_reg;
+	int	lcdsel_grf_reg;
 	u32	lcdsel_big;
 	u32	lcdsel_lit;
 };
@@ -245,6 +245,9 @@  static void dw_hdmi_rockchip_encoder_enable(struct drm_encoder *encoder)
 	u32 val;
 	int ret;
 
+	if (hdmi->chip_data->lcdsel_grf_reg < 0)
+		return;
+
 	ret = drm_of_encoder_active_endpoint_id(hdmi->dev->of_node, encoder);
 	if (ret)
 		val = hdmi->chip_data->lcdsel_lit;