@@ -65,17 +65,18 @@ static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
CLK_SET_RATE_UNGATE);
/* TODO: The result of N/M is required to be in [8, 25] range. */
-static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0",
- "osc24M", 0x0010,
- 8, 7, /* N */
- 0, 4, /* M */
- BIT(24), /* frac enable */
- BIT(25), /* frac select */
- 270000000, /* frac rate 0 */
- 297000000, /* frac rate 1 */
- BIT(31), /* gate */
- BIT(28), /* lock */
- CLK_SET_RATE_UNGATE);
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN(pll_video0_clk, "pll-video0",
+ "osc24M", 0x0010,
+ 192000000, /* Minimum rate */
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
/* TODO: The result of N/M is required to be in [8, 25] range. */
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
@@ -151,17 +152,18 @@ static struct ccu_nk pll_periph1_clk = {
};
/* TODO: The result of N/M is required to be in [8, 25] range. */
-static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1",
- "osc24M", 0x030,
- 8, 7, /* N */
- 0, 4, /* M */
- BIT(24), /* frac enable */
- BIT(25), /* frac select */
- 270000000, /* frac rate 0 */
- 297000000, /* frac rate 1 */
- BIT(31), /* gate */
- BIT(28), /* lock */
- CLK_SET_RATE_UNGATE);
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN(pll_video1_clk, "pll-video1",
+ "osc24M", 0x030,
+ 192000000, /* Minimum rate */
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ CLK_SET_RATE_UNGATE);
static struct ccu_nkm pll_sata_clk = {
.enable = BIT(31),
According to documentation and experience with other similar SoCs, video PLLs don't work stable if their output frequency is set below 192 MHz. Because of that, set minimal rate to both R40 video PLLs to 192 MHz. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> --- drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 46 +++++++++++++++------------- 1 file changed, 24 insertions(+), 22 deletions(-)