[v3,13/18] arm64: dts: allwinner: a64: bananapi-m64: Enable HDMI output

Commit Message

Jagan Teki July 18, 2018, 10:54 a.m. UTC

Enable all necessary HDMI pipeline nodes with HDMI out
connector on Bananpi-m64 board.

Signed-off-by: Jagan Teki <[e-mail]>
---
Changes for v3:
- Enable all pipeline components
Changes for v2:
- none

 .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 094cfed13df9..7adba2c8f6e5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -60,6 +60,17 @@ 
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -86,6 +97,10 @@ 
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -103,6 +118,17 @@ 
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -120,6 +146,10 @@ 
 	};
 };
 
+&mixer1 {
+	status = "okay";
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
@@ -300,6 +330,10 @@ 
 	vcc-hdmi-supply = <&reg_dldo1>;
 };
 
+&tcon1 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;