| Message ID | 20180726091534.27521-1-enric.balletbo@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | backlight: pwm_bl: switch to using "atomic" PWM API | expand |
On 26/07/18 10:15, Enric Balletbo i Serra wrote: > The "atomic" API allows us to configure PWM period and duty_cycle and > enable it in one call. > > The patch also moves the pwm_init_state just before any use of the > pwm_state struct, this fixes a potential bug where pwm_get_state > can be called before pwm_init_state. > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- > > drivers/video/backlight/pwm_bl.c | 48 ++++++++++++++++++++------------ > 1 file changed, 30 insertions(+), 18 deletions(-) > > diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c > index bdfcc0a71db1..2c734d55d607 100644 > --- a/drivers/video/backlight/pwm_bl.c > +++ b/drivers/video/backlight/pwm_bl.c > @@ -46,7 +46,8 @@ struct pwm_bl_data { > void (*exit)(struct device *); > }; > > -static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness) > +static void pwm_backlight_power_on(struct pwm_bl_data *pb, > + struct pwm_state *state) > { > int err; > > @@ -57,7 +58,8 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness) > if (err < 0) > dev_err(pb->dev, "failed to enable power supply\n"); > > - pwm_enable(pb->pwm); > + state->enabled = true; > + pwm_apply_state(pb->pwm, state); > > if (pb->post_pwm_on_delay) > msleep(pb->post_pwm_on_delay); > @@ -70,6 +72,8 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness) > > static void pwm_backlight_power_off(struct pwm_bl_data *pb) > { > + struct pwm_state state; > + > if (!pb->enabled) > return; > > @@ -79,8 +83,11 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb) > if (pb->pwm_off_delay) > msleep(pb->pwm_off_delay); > > - pwm_config(pb->pwm, 0, pb->period); > - pwm_disable(pb->pwm); > + pwm_get_state(pb->pwm, &state); > + state.enabled = false; > + state.period = pb->period; > + state.duty_cycle = 0; > + pwm_apply_state(pb->pwm, &state); > > regulator_disable(pb->power_supply); > pb->enabled = false; > @@ -106,6 +113,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl) > { > struct pwm_bl_data *pb = bl_get_data(bl); > int brightness = bl->props.brightness; > + struct pwm_state state; > int duty_cycle; > > if (bl->props.power != FB_BLANK_UNBLANK || > @@ -118,8 +126,13 @@ static int pwm_backlight_update_status(struct backlight_device *bl) > > if (brightness > 0) { > duty_cycle = compute_duty_cycle(pb, brightness); > - pwm_config(pb->pwm, duty_cycle, pb->period); > - pwm_backlight_power_on(pb, brightness); > + pwm_get_state(pb->pwm, &state); > + state.duty_cycle = duty_cycle; > + state.period = pb->period; > + if (!state.enabled) > + pwm_backlight_power_on(pb, &state); > + else > + pwm_apply_state(pb->pwm, &state); > } else > pwm_backlight_power_off(pb); > > @@ -447,7 +460,6 @@ static int pwm_backlight_probe(struct platform_device *pdev) > struct device_node *node = pdev->dev.of_node; > struct pwm_bl_data *pb; > struct pwm_state state; > - struct pwm_args pargs; > unsigned int i; > int ret; > > @@ -539,10 +551,17 @@ static int pwm_backlight_probe(struct platform_device *pdev) > > dev_dbg(&pdev->dev, "got pwm for backlight\n"); > > - if (!data->levels) { > - /* Get the PWM period (in nanoseconds) */ > - pwm_get_state(pb->pwm, &state); > + /* Sync up PWM state and ensure it is off. */ > + pwm_init_state(pb->pwm, &state); > + state.enabled = false; > + ret = pwm_apply_state(pb->pwm, &state); Why do we ensure the PWM is off? Does this cause backlight flickers or make some of the code in pwm_backlight_initial_power_state() unreachable? > + if (ret) { > + dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n", > + ret); > + goto err_alloc; > + } > > + if (!data->levels) { > ret = pwm_backlight_brightness_default(&pdev->dev, data, > state.period); > if (ret < 0) { > @@ -559,20 +578,13 @@ static int pwm_backlight_probe(struct platform_device *pdev) > pb->levels = data->levels; > } > > - /* > - * FIXME: pwm_apply_args() should be removed when switching to > - * the atomic PWM API. > - */ > - pwm_apply_args(pb->pwm); > - > /* > * The DT case will set the pwm_period_ns field to 0 and store the > * period, parsed from the DT, in the PWM device. For the non-DT case, > * set the period from platform data if it has not already been set > * via the PWM lookup table. > */ > - pwm_get_args(pb->pwm, &pargs); > - pb->period = pargs.period; > + pb->period = state.period; > if (!pb->period && (data->pwm_period_ns > 0)) > pb->period = data->pwm_period_ns; Could we have delayed applying the state until we know what the period is supposed to be? No other call to pwm_apply_state() has its error value checked... so if there are problems with the period we could detect them here. Note also that we can guarantee the period is set before the probe completes then I think pb->period could be removed entirely. It was only really being carried around to help with calls to pwm_config() and these no longer exist. Daniel.
Hi Daniel, Thanks for reviewing the patch. On 27/07/18 13:32, Daniel Thompson wrote: > On 26/07/18 10:15, Enric Balletbo i Serra wrote: >> The "atomic" API allows us to configure PWM period and duty_cycle and >> enable it in one call. >> >> The patch also moves the pwm_init_state just before any use of the >> pwm_state struct, this fixes a potential bug where pwm_get_state >> can be called before pwm_init_state. >> >> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> >> --- >> >> drivers/video/backlight/pwm_bl.c | 48 ++++++++++++++++++++------------ >> 1 file changed, 30 insertions(+), 18 deletions(-) >> >> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c >> index bdfcc0a71db1..2c734d55d607 100644 >> --- a/drivers/video/backlight/pwm_bl.c >> +++ b/drivers/video/backlight/pwm_bl.c >> @@ -46,7 +46,8 @@ struct pwm_bl_data { >> void (*exit)(struct device *); >> }; >> -static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness) >> +static void pwm_backlight_power_on(struct pwm_bl_data *pb, >> + struct pwm_state *state) >> { >> int err; >> @@ -57,7 +58,8 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, >> int brightness) >> if (err < 0) >> dev_err(pb->dev, "failed to enable power supply\n"); >> - pwm_enable(pb->pwm); >> + state->enabled = true; >> + pwm_apply_state(pb->pwm, state); >> if (pb->post_pwm_on_delay) >> msleep(pb->post_pwm_on_delay); >> @@ -70,6 +72,8 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, >> int brightness) >> static void pwm_backlight_power_off(struct pwm_bl_data *pb) >> { >> + struct pwm_state state; >> + >> if (!pb->enabled) >> return; >> @@ -79,8 +83,11 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb) >> if (pb->pwm_off_delay) >> msleep(pb->pwm_off_delay); >> - pwm_config(pb->pwm, 0, pb->period); >> - pwm_disable(pb->pwm); >> + pwm_get_state(pb->pwm, &state); >> + state.enabled = false; >> + state.period = pb->period; >> + state.duty_cycle = 0; >> + pwm_apply_state(pb->pwm, &state); >> regulator_disable(pb->power_supply); >> pb->enabled = false; >> @@ -106,6 +113,7 @@ static int pwm_backlight_update_status(struct >> backlight_device *bl) >> { >> struct pwm_bl_data *pb = bl_get_data(bl); >> int brightness = bl->props.brightness; >> + struct pwm_state state; >> int duty_cycle; >> if (bl->props.power != FB_BLANK_UNBLANK || >> @@ -118,8 +126,13 @@ static int pwm_backlight_update_status(struct >> backlight_device *bl) >> if (brightness > 0) { >> duty_cycle = compute_duty_cycle(pb, brightness); >> - pwm_config(pb->pwm, duty_cycle, pb->period); >> - pwm_backlight_power_on(pb, brightness); >> + pwm_get_state(pb->pwm, &state); >> + state.duty_cycle = duty_cycle; >> + state.period = pb->period; >> + if (!state.enabled) >> + pwm_backlight_power_on(pb, &state); >> + else >> + pwm_apply_state(pb->pwm, &state); >> } else >> pwm_backlight_power_off(pb); >> @@ -447,7 +460,6 @@ static int pwm_backlight_probe(struct platform_device >> *pdev) >> struct device_node *node = pdev->dev.of_node; >> struct pwm_bl_data *pb; >> struct pwm_state state; >> - struct pwm_args pargs; >> unsigned int i; >> int ret; >> @@ -539,10 +551,17 @@ static int pwm_backlight_probe(struct platform_device >> *pdev) >> dev_dbg(&pdev->dev, "got pwm for backlight\n"); >> - if (!data->levels) { >> - /* Get the PWM period (in nanoseconds) */ >> - pwm_get_state(pb->pwm, &state); >> + /* Sync up PWM state and ensure it is off. */ >> + pwm_init_state(pb->pwm, &state); >> + state.enabled = false; >> + ret = pwm_apply_state(pb->pwm, &state); > > Why do we ensure the PWM is off? Does this cause backlight flickers or make some > of the code in pwm_backlight_initial_power_state() unreachable? > No, I think that I can just remove that line. > >> + if (ret) { >> + dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n", >> + ret); >> + goto err_alloc; >> + } >> + if (!data->levels) { >> ret = pwm_backlight_brightness_default(&pdev->dev, data, >> state.period); >> if (ret < 0) { >> @@ -559,20 +578,13 @@ static int pwm_backlight_probe(struct platform_device >> *pdev) >> pb->levels = data->levels; >> } >> - /* >> - * FIXME: pwm_apply_args() should be removed when switching to >> - * the atomic PWM API. >> - */ >> - pwm_apply_args(pb->pwm); >> - >> /* >> * The DT case will set the pwm_period_ns field to 0 and store the >> * period, parsed from the DT, in the PWM device. For the non-DT case, >> * set the period from platform data if it has not already been set >> * via the PWM lookup table. >> */ >> - pwm_get_args(pb->pwm, &pargs); >> - pb->period = pargs.period; >> + pb->period = state.period; >> if (!pb->period && (data->pwm_period_ns > 0)) >> pb->period = data->pwm_period_ns; > > Could we have delayed applying the state until we know what the period is > supposed to be? No other call to pwm_apply_state() has its error value > checked... so if there are problems with the period we could detect them here. > Yes, I can move this code before 'if (!data->levels)' and call pwm_apply_state after. > Note also that we can guarantee the period is set before the probe completes > then I think pb->period could be removed entirely. It was only really being > carried around to help with calls to pwm_config() and these no longer exist. > Right, I think that I can also remove pb->period. I'll send a second version soon. Thanks, Enric > > Daniel. >
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index bdfcc0a71db1..2c734d55d607 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -46,7 +46,8 @@ struct pwm_bl_data { void (*exit)(struct device *); }; -static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness) +static void pwm_backlight_power_on(struct pwm_bl_data *pb, + struct pwm_state *state) { int err; @@ -57,7 +58,8 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness) if (err < 0) dev_err(pb->dev, "failed to enable power supply\n"); - pwm_enable(pb->pwm); + state->enabled = true; + pwm_apply_state(pb->pwm, state); if (pb->post_pwm_on_delay) msleep(pb->post_pwm_on_delay); @@ -70,6 +72,8 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness) static void pwm_backlight_power_off(struct pwm_bl_data *pb) { + struct pwm_state state; + if (!pb->enabled) return; @@ -79,8 +83,11 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb) if (pb->pwm_off_delay) msleep(pb->pwm_off_delay); - pwm_config(pb->pwm, 0, pb->period); - pwm_disable(pb->pwm); + pwm_get_state(pb->pwm, &state); + state.enabled = false; + state.period = pb->period; + state.duty_cycle = 0; + pwm_apply_state(pb->pwm, &state); regulator_disable(pb->power_supply); pb->enabled = false; @@ -106,6 +113,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl) { struct pwm_bl_data *pb = bl_get_data(bl); int brightness = bl->props.brightness; + struct pwm_state state; int duty_cycle; if (bl->props.power != FB_BLANK_UNBLANK || @@ -118,8 +126,13 @@ static int pwm_backlight_update_status(struct backlight_device *bl) if (brightness > 0) { duty_cycle = compute_duty_cycle(pb, brightness); - pwm_config(pb->pwm, duty_cycle, pb->period); - pwm_backlight_power_on(pb, brightness); + pwm_get_state(pb->pwm, &state); + state.duty_cycle = duty_cycle; + state.period = pb->period; + if (!state.enabled) + pwm_backlight_power_on(pb, &state); + else + pwm_apply_state(pb->pwm, &state); } else pwm_backlight_power_off(pb); @@ -447,7 +460,6 @@ static int pwm_backlight_probe(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; struct pwm_bl_data *pb; struct pwm_state state; - struct pwm_args pargs; unsigned int i; int ret; @@ -539,10 +551,17 @@ static int pwm_backlight_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "got pwm for backlight\n"); - if (!data->levels) { - /* Get the PWM period (in nanoseconds) */ - pwm_get_state(pb->pwm, &state); + /* Sync up PWM state and ensure it is off. */ + pwm_init_state(pb->pwm, &state); + state.enabled = false; + ret = pwm_apply_state(pb->pwm, &state); + if (ret) { + dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n", + ret); + goto err_alloc; + } + if (!data->levels) { ret = pwm_backlight_brightness_default(&pdev->dev, data, state.period); if (ret < 0) { @@ -559,20 +578,13 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb->levels = data->levels; } - /* - * FIXME: pwm_apply_args() should be removed when switching to - * the atomic PWM API. - */ - pwm_apply_args(pb->pwm); - /* * The DT case will set the pwm_period_ns field to 0 and store the * period, parsed from the DT, in the PWM device. For the non-DT case, * set the period from platform data if it has not already been set * via the PWM lookup table. */ - pwm_get_args(pb->pwm, &pargs); - pb->period = pargs.period; + pb->period = state.period; if (!pb->period && (data->pwm_period_ns > 0)) pb->period = data->pwm_period_ns;
The "atomic" API allows us to configure PWM period and duty_cycle and enable it in one call. The patch also moves the pwm_init_state just before any use of the pwm_state struct, this fixes a potential bug where pwm_get_state can be called before pwm_init_state. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> --- drivers/video/backlight/pwm_bl.c | 48 ++++++++++++++++++++------------ 1 file changed, 30 insertions(+), 18 deletions(-)