diff mbox series

[8/8] arm64: dts: rockchip: Enable dmc and dfi nodes on gru.

Message ID 20180730081124.30698-9-enric.balletbo@collabora.com (mailing list archive)
State New, archived
Headers show
Series Add support for drm/rockchip to dynamically control the DDR frequency. | expand

Commit Message

Enric Balletbo i Serra July 30, 2018, 8:11 a.m. UTC 
From: Lin Huang <hl@rock-chips.com>

Enable the DMC (Dynamic Memory Controller) and the DFI (DDR PHY Interface)
nodes on gru/kevin boards so we can support DDR DVFS.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

Changes in v1: None

 arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 21 ++++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3399.dtsi     |  2 +-
 2 files changed, 22 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 1da8f7c1501e..7a7dcca11497 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -295,6 +295,12 @@ 
 	status = "okay";
 };
 
+&dmc_opp_table {
+	opp04 {
+		opp-suspend;
+	};
+};
+
 /*
  * Set some suspend operating points to avoid OVP in suspend
  *
@@ -374,6 +380,10 @@ 
 		<200000000>;
 };
 
+&display_subsystem {
+	devfreq = <&dmc>;
+};
+
 &emmc_phy {
 	status = "okay";
 };
@@ -495,6 +505,17 @@  ap_i2c_audio: &i2c8 {
 	status = "okay";
 };
 
+&dfi {
+	status = "okay";
+};
+
+&dmc {
+	status = "okay";
+	center-supply = <&ppvar_centerlogic>;
+	upthreshold = <25>;
+	downdifferential = <15>;
+};
+
 &sdhci {
 	/*
 	 * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index e9d9aa7aa2ac..20b64ca638cb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -128,7 +128,7 @@ 
 		};
 	};
 
-	display-subsystem {
+	display_subsystem: display-subsystem {
 		compatible = "rockchip,display-subsystem";
 		ports = <&vopl_out>, <&vopb_out>;
 	};