@@ -270,6 +270,7 @@ static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
struct mipi_dsi_device *device)
{
struct dw_mipi_dsi *dsi = host_to_dsi(host);
+ const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
struct drm_bridge *bridge;
struct drm_panel *panel;
int ret;
@@ -300,6 +301,12 @@ static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
drm_bridge_add(&dsi->bridge);
+ if (pdata->host_ops && pdata->host_ops->attach) {
+ ret = pdata->host_ops->attach(pdata->priv_data, device);
+ if (ret < 0)
+ return ret;
+ }
+
return 0;
}
@@ -307,6 +314,14 @@ static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
struct mipi_dsi_device *device)
{
struct dw_mipi_dsi *dsi = host_to_dsi(host);
+ const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
+ int ret;
+
+ if (pdata->host_ops && pdata->host_ops->detach) {
+ ret = pdata->host_ops->detach(pdata->priv_data, device);
+ if (ret < 0)
+ return ret;
+ }
drm_of_panel_bridge_remove(host->dev->of_node, 1, 0);
@@ -19,6 +19,13 @@ struct dw_mipi_dsi_phy_ops {
unsigned int *lane_mbps);
};
+struct dw_mipi_dsi_host_ops {
+ int (*attach)(void *priv_data,
+ struct mipi_dsi_device *dsi);
+ int (*detach)(void *priv_data,
+ struct mipi_dsi_device *dsi);
+};
+
struct dw_mipi_dsi_plat_data {
void __iomem *base;
unsigned int max_data_lanes;
@@ -27,6 +34,7 @@ struct dw_mipi_dsi_plat_data {
const struct drm_display_mode *mode);
const struct dw_mipi_dsi_phy_ops *phy_ops;
+ const struct dw_mipi_dsi_host_ops *host_ops;
void *priv_data;
};
With the regular means of adding the dsi-component in probe it creates a race condition with the panel probing, as the panel device only gets created after the dsi-bus got created. When the panel-driver is build as a module it currently fails hard as the panel cannot be probed directly: dw_mipi_dsi_bind() __dw_mipi_dsi_probe() creates dsi bus creates panel device triggers panel module load panel not probed (module not loaded or panel probe slow) drm_bridge_attach fails with -EINVAL due to empty panel_bridge Additionally the panel probing can run concurrently with dsi bringup making it possible that the panel can already be found but dsi-attach hasn't finished running. To solve that cleanly we may want to only create the component after the panel has finished probing, by calling component_add from the host-attach dsi callback. As that is specific to glue drivers, add a new struct for host_ops so that glue drivers can tell the bridge to call specific functions after the common host-attach and before the common host-detach run. Suggested-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 15 +++++++++++++++ include/drm/bridge/dw_mipi_dsi.h | 8 ++++++++ 2 files changed, 23 insertions(+)