@@ -40,6 +40,61 @@ static void ccu_mp_find_best(unsigned long parent, unsigned long rate,
*p = best_p;
}
+static unsigned long ccu_mp_find_best_with_parent_adj(struct clk_hw *hw,
+ unsigned long *parent,
+ unsigned long rate,
+ unsigned int max_m,
+ unsigned int max_p)
+{
+ unsigned long parent_rate_saved;
+ unsigned long parent_rate, now;
+ unsigned long best_rate = 0;
+ unsigned int _m, _p, div;
+ unsigned long maxdiv;
+
+ parent_rate_saved = *parent;
+
+ /*
+ * The maximum divider we can use without overflowing
+ * unsigned long in rate * m * p below
+ */
+ maxdiv = max_m * max_p;
+ maxdiv = min(ULONG_MAX / rate, maxdiv);
+
+ for (_p = 1; _p <= max_p; _p <<= 1) {
+ for (_m = 1; _m <= max_m; _m++) {
+ div = _m * _p;
+
+ if (div > maxdiv)
+ break;
+
+ if (rate * div == parent_rate_saved) {
+ /*
+ * It's the most ideal case if the requested
+ * rate can be divided from parent clock without
+ * needing to change parent rate, so return the
+ * divider immediately.
+ */
+ *parent = parent_rate_saved;
+ return rate;
+ }
+
+ parent_rate = clk_hw_round_rate(hw, rate * div);
+ now = parent_rate / div;
+
+ if (now <= rate && now > best_rate) {
+ best_rate = now;
+ *parent = parent_rate;
+
+ if (now == rate)
+ return rate;
+ }
+ }
+ }
+
+ return best_rate;
+}
+
static unsigned long ccu_mp_round_rate(struct ccu_mux_internal *mux,
struct clk_hw *hw,
unsigned long *parent_rate,
@@ -56,8 +111,13 @@ static unsigned long ccu_mp_round_rate(struct ccu_mux_internal *mux,
max_m = cmp->m.max ?: 1 << cmp->m.width;
max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
- ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p);
- rate = *parent_rate / p / m;
+ if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
+ ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p);
+ rate = *parent_rate / p / m;
+ } else {
+ rate = ccu_mp_find_best_with_parent_adj(hw, parent_rate, rate,
+ max_m, max_p);
+ }
if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate /= cmp->fixed_post_div;
Currently MP clocks don't consider adjusting parent rate even if they are allowed to do so. Such behaviour considerably lowers amount of possible rates, which is very inconvenient when such clock is used for pixel clock, for example. In order to improve the situation, adjusting parent rate is considered when allowed. This code is inspired by clk_divider_bestdiv() function, which does basically the same thing for different clock type. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> --- drivers/clk/sunxi-ng/ccu_mp.c | 64 +++++++++++++++++++++++++++++++++-- 1 file changed, 62 insertions(+), 2 deletions(-)