@@ -15,3 +15,14 @@ config DRM_ANALOGIX_ANX78XX
designed for portable devices. The ANX78XX transforms
the HDMI output of an application processor to MyDP
or DisplayPort.
+
+config DRM_ANALOGIX_ANX6345
+ tristate "Analogix ANX6345 bridge"
+ select DRM_ANALOGIX_DP_I2C
+ select DRM_KMS_HELPER
+ select REGMAP_I2C
+ help
+ ANX6345 is an ultra-low Full-HD DisplayPort/eDP
+ transmitter designed for portable devices. The
+ ANX6345 transforms the LVTTL RGB output of an
+ application processor to eDP or DisplayPort.
@@ -3,3 +3,4 @@ analogix_dp_i2c-objs := analogix-i2c-dptx.o
obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix_dp.o
obj-$(CONFIG_DRM_ANALOGIX_DP_I2C) += analogix_dp_i2c.o
obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
+obj-$(CONFIG_DRM_ANALOGIX_ANX6345) += analogix-anx6345.o
new file mode 100644
@@ -0,0 +1,862 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright(c) Icenowy Zheng <icenowy@aosc.io>
+ * Based on analogix-anx6345.c, which is:
+ * Copyright(c) 2016, Analogix Semiconductor.
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_edid.h>
+
+#include "analogix-i2c-dptx.h"
+#include "analogix-i2c-txcommon.h"
+
+#define I2C_NUM_ADDRESSES 2
+#define I2C_IDX_DPTX 0
+#define I2C_IDX_TXCOM 1
+
+#define XTAL_CLK 270 /* 27M */
+
+#define POLL_DELAY 50000 /* us */
+#define POLL_TIMEOUT 5000000 /* us */
+
+static const u8 anx6345_i2c_addresses[] = {
+ [I2C_IDX_DPTX] = ANALOGIX_I2C_DPTX,
+ [I2C_IDX_TXCOM] = ANALOGIX_I2C_TXCOMMON,
+};
+
+struct anx6345_platform_data {
+ struct regulator *dvdd12;
+ struct regulator *dvdd25;
+ struct regulator *vcc_panel;
+ struct gpio_desc *gpiod_reset;
+};
+
+struct anx6345 {
+ struct drm_dp_aux aux;
+ struct drm_bridge bridge;
+ struct i2c_client *client;
+ struct edid *edid;
+ struct drm_connector connector;
+ struct drm_dp_link link;
+ struct anx6345_platform_data pdata;
+ struct mutex lock;
+
+ /*
+ * I2C Slave addresses of ANX6345 are mapped as DPTX and SYS
+ */
+ struct i2c_client *i2c_clients[I2C_NUM_ADDRESSES];
+ struct regmap *map[I2C_NUM_ADDRESSES];
+
+ u16 chipid;
+ u8 dpcd[DP_RECEIVER_CAP_SIZE];
+
+ bool powered;
+};
+
+static inline struct anx6345 *connector_to_anx6345(struct drm_connector *c)
+{
+ return container_of(c, struct anx6345, connector);
+}
+
+static inline struct anx6345 *bridge_to_anx6345(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct anx6345, bridge);
+}
+
+static int anx6345_set_bits(struct regmap *map, u8 reg, u8 mask)
+{
+ return regmap_update_bits(map, reg, mask, mask);
+}
+
+static int anx6345_clear_bits(struct regmap *map, u8 reg, u8 mask)
+{
+ return regmap_update_bits(map, reg, mask, 0);
+}
+
+static ssize_t anx6345_aux_transfer(struct drm_dp_aux *aux,
+ struct drm_dp_aux_msg *msg)
+{
+ struct anx6345 *anx6345 = container_of(aux, struct anx6345, aux);
+
+ return anx_aux_transfer(anx6345->map[I2C_IDX_DPTX], msg);
+}
+
+static int anx6345_dp_link_training(struct anx6345 *anx6345)
+{
+ unsigned int value;
+ u8 dp_bw;
+ int err;
+
+ err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
+ SP_POWERDOWN_CTRL_REG,
+ SP_TOTAL_PD);
+ if (err)
+ return err;
+
+ err = drm_dp_dpcd_readb(&anx6345->aux, DP_MAX_LINK_RATE, &dp_bw);
+ if (err < 0)
+ return err;
+
+ switch (dp_bw) {
+ case DP_LINK_BW_1_62:
+ case DP_LINK_BW_2_7:
+ break;
+
+ default:
+ DRM_DEBUG_KMS("DP bandwidth (%#02x) not supported\n", dp_bw);
+ return -EINVAL;
+ }
+
+ err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
+ SP_VIDEO_MUTE);
+ if (err)
+ return err;
+
+ err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
+ SP_VID_CTRL1_REG, SP_VIDEO_EN);
+ if (err)
+ return err;
+
+ /* Get DPCD info */
+ err = drm_dp_dpcd_read(&anx6345->aux, DP_DPCD_REV,
+ &anx6345->dpcd, DP_RECEIVER_CAP_SIZE);
+ if (err < 0) {
+ DRM_ERROR("Failed to read DPCD: %d\n", err);
+ return err;
+ }
+
+ /* Clear channel x SERDES power down */
+ err = anx6345_clear_bits(anx6345->map[I2C_IDX_DPTX],
+ SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
+ if (err)
+ return err;
+
+ /* Check link capabilities */
+ err = drm_dp_link_probe(&anx6345->aux, &anx6345->link);
+ if (err < 0) {
+ DRM_ERROR("Failed to probe link capabilities: %d\n", err);
+ return err;
+ }
+
+ /* Power up the sink */
+ err = drm_dp_link_power_up(&anx6345->aux, &anx6345->link);
+ if (err < 0) {
+ DRM_ERROR("Failed to power up DisplayPort link: %d\n", err);
+ return err;
+ }
+
+ /* Possibly enable downspread on the sink */
+ err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+ SP_DP_DOWNSPREAD_CTRL1_REG, 0);
+ if (err)
+ return err;
+
+ if (anx6345->dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5) {
+ DRM_DEBUG("Enable downspread on the sink\n");
+ /* 4000PPM */
+ err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+ SP_DP_DOWNSPREAD_CTRL1_REG, 8);
+ if (err)
+ return err;
+
+ err = drm_dp_dpcd_writeb(&anx6345->aux, DP_DOWNSPREAD_CTRL,
+ DP_SPREAD_AMP_0_5);
+ if (err < 0)
+ return err;
+ } else {
+ err = drm_dp_dpcd_writeb(&anx6345->aux, DP_DOWNSPREAD_CTRL, 0);
+ if (err < 0)
+ return err;
+ }
+
+ /* Set the lane count and the link rate on the sink */
+ if (drm_dp_enhanced_frame_cap(anx6345->dpcd))
+ err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
+ SP_DP_SYSTEM_CTRL_BASE + 4,
+ SP_ENHANCED_MODE);
+ else
+ err = anx6345_clear_bits(anx6345->map[I2C_IDX_DPTX],
+ SP_DP_SYSTEM_CTRL_BASE + 4,
+ SP_ENHANCED_MODE);
+ if (err)
+ return err;
+
+ value = drm_dp_link_rate_to_bw_code(anx6345->link.rate);
+ err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+ SP_DP_MAIN_LINK_BW_SET_REG, value);
+ if (err)
+ return err;
+
+ err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+ SP_DP_LANE_COUNT_SET_REG, anx6345->link.num_lanes);
+ if (err)
+ return err;
+
+ err = drm_dp_link_configure(&anx6345->aux, &anx6345->link);
+ if (err < 0) {
+ DRM_ERROR("Failed to configure DisplayPort link: %d\n", err);
+ return err;
+ }
+
+ /* Start training on the source */
+ err = regmap_write(anx6345->map[I2C_IDX_DPTX], SP_DP_LT_CTRL_REG,
+ SP_LT_EN);
+ if (err)
+ return err;
+
+ err = regmap_read_poll_timeout(anx6345->map[I2C_IDX_DPTX],
+ SP_DP_LT_CTRL_REG,
+ value, !(value & SP_DP_LT_INPROGRESS),
+ POLL_DELAY, POLL_TIMEOUT);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static int anx6345_tx_initialization(struct anx6345 *anx6345)
+{
+ int err, i;
+
+ /* FIXME: hardcode color depth now */
+ err = regmap_write(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL2_REG,
+ SP_IN_BPC_6BIT << SP_IN_BPC_SHIFT);
+ if (err)
+ return err;
+
+ err = regmap_write(anx6345->map[I2C_IDX_DPTX], SP_DP_PLL_CTRL_REG, 0);
+ if (err)
+ return err;
+
+ err = regmap_write(anx6345->map[I2C_IDX_TXCOM],
+ SP_ANALOG_DEBUG1_REG, 0);
+ if (err)
+ return err;
+
+ err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+ SP_DP_LINK_DEBUG_CTRL_REG,
+ SP_NEW_PRBS7 | SP_M_VID_DEBUG);
+ if (err)
+ return err;
+
+ err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+ SP_DP_ANALOG_POWER_DOWN_REG, 0);
+ if (err)
+ return err;
+
+ /* Force HPD */
+ err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
+ SP_DP_SYSTEM_CTRL_BASE + 3,
+ SP_HPD_FORCE | SP_HPD_CTRL);
+ if (err)
+ return err;
+
+ for (i = 0; i < 4; i++) {
+ /* 4 lanes */
+ err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+ SP_DP_LANE0_LT_CTRL_REG + i, 0);
+ if (err)
+ return err;
+ }
+
+ /* Reset AUX */
+ err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM],
+ SP_RESET_CTRL2_REG, SP_AUX_RST);
+ if (err)
+ return err;
+
+ err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
+ SP_RESET_CTRL2_REG, SP_AUX_RST);
+ if (err)
+ return err;
+
+ err = anx6345_dp_link_training(anx6345);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static void anx6345_poweron(struct anx6345 *anx6345)
+{
+ struct anx6345_platform_data *pdata = &anx6345->pdata;
+ int err;
+
+ if (WARN_ON(anx6345->powered))
+ return;
+
+ if (pdata->dvdd12) {
+ err = regulator_enable(pdata->dvdd12);
+ if (err) {
+ DRM_ERROR("Failed to enable DVDD12 regulator: %d\n",
+ err);
+ return;
+ }
+
+ usleep_range(1000, 2000);
+ }
+
+ if (pdata->dvdd25) {
+ err = regulator_enable(pdata->dvdd25);
+ if (err) {
+ DRM_ERROR("Failed to enable DVDD25 regulator: %d\n",
+ err);
+ return;
+ }
+
+ usleep_range(5000, 10000);
+ }
+
+ if (pdata->vcc_panel) {
+ err = regulator_enable(pdata->vcc_panel);
+ if (err) {
+ DRM_ERROR("Failed to enable panel regulator: %d\n",
+ err);
+ return;
+ }
+ }
+
+ gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
+ usleep_range(1000, 2000);
+
+ gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
+
+ /* Power on registers module */
+ anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
+ SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+ anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
+ SP_REGISTER_PD | SP_TOTAL_PD);
+
+ anx6345->powered = true;
+}
+
+static void anx6345_poweroff(struct anx6345 *anx6345)
+{
+ struct anx6345_platform_data *pdata = &anx6345->pdata;
+ int err;
+
+ if (WARN_ON(!anx6345->powered))
+ return;
+
+ gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
+ usleep_range(1000, 2000);
+
+ if (pdata->vcc_panel) {
+ err = regulator_disable(pdata->vcc_panel);
+ if (err) {
+ DRM_ERROR("Failed to disable panel regulator: %d\n",
+ err);
+ return;
+ }
+ }
+
+ if (pdata->dvdd25) {
+ err = regulator_disable(pdata->dvdd25);
+ if (err) {
+ DRM_ERROR("Failed to disable DVDD25 regulator: %d\n",
+ err);
+ return;
+ }
+
+ usleep_range(5000, 10000);
+ }
+
+ if (pdata->dvdd12) {
+ err = regulator_disable(pdata->dvdd12);
+ if (err) {
+ DRM_ERROR("Failed to disable DVDD12 regulator: %d\n",
+ err);
+ return;
+ }
+
+ usleep_range(1000, 2000);
+ }
+
+ anx6345->powered = false;
+}
+
+static int anx6345_start(struct anx6345 *anx6345)
+{
+ int err;
+
+ if (!anx6345->powered)
+ anx6345_poweron(anx6345);
+
+ /* Power on needed modules */
+ err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
+ SP_POWERDOWN_CTRL_REG,
+ SP_VIDEO_PD | SP_LINK_PD);
+
+ err = anx6345_tx_initialization(anx6345);
+ if (err) {
+ DRM_ERROR("Failed transmitter initialization: %d\n", err);
+ goto err_poweroff;
+ }
+
+ /*
+ * This delay seems to help keep the hardware in a good state. Without
+ * it, there are times where it fails silently.
+ */
+ usleep_range(10000, 15000);
+
+ return 0;
+
+err_poweroff:
+ DRM_ERROR("Failed DisplayPort transmitter initialization: %d\n", err);
+ anx6345_poweroff(anx6345);
+
+ return err;
+}
+
+static int anx6345_init_pdata(struct anx6345 *anx6345)
+{
+ struct anx6345_platform_data *pdata = &anx6345->pdata;
+ struct device *dev = &anx6345->client->dev;
+
+ /* 1.2V digital core power regulator */
+ pdata->dvdd12 = devm_regulator_get(dev, "dvdd12");
+ if (IS_ERR(pdata->dvdd12)) {
+ DRM_ERROR("DVDD12 regulator not found\n");
+ return PTR_ERR(pdata->dvdd12);
+ }
+
+ /* 2.5V digital core power regulator */
+ pdata->dvdd25 = devm_regulator_get(dev, "dvdd25");
+ if (IS_ERR(pdata->dvdd25)) {
+ DRM_ERROR("DVDD25 regulator not found\n");
+ return PTR_ERR(pdata->dvdd25);
+ }
+
+ /* panel power regulator */
+ pdata->vcc_panel = devm_regulator_get(dev, "panel");
+ if (IS_ERR(pdata->vcc_panel)) {
+ DRM_ERROR("panel regulator not found\n");
+ return PTR_ERR(pdata->vcc_panel);
+ }
+
+ /* GPIO for chip reset */
+ pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+
+ return PTR_ERR_OR_ZERO(pdata->gpiod_reset);
+}
+
+static int anx6345_config_dp_output(struct anx6345 *anx6345)
+{
+ int err;
+
+ err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
+ SP_VIDEO_MUTE);
+ if (err)
+ return err;
+
+ /* Enable DP output */
+ err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
+ SP_VIDEO_EN);
+ if (err)
+ return err;
+
+ /* Force stream valid */
+ err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
+ SP_DP_SYSTEM_CTRL_BASE + 3,
+ SP_STRM_FORCE | SP_STRM_CTRL);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static int anx6345_get_downstream_info(struct anx6345 *anx6345)
+{
+ u8 value;
+ int err;
+
+ err = drm_dp_dpcd_readb(&anx6345->aux, DP_SINK_COUNT, &value);
+ if (err < 0) {
+ DRM_ERROR("Get sink count failed %d\n", err);
+ return err;
+ }
+
+ if (!DP_GET_SINK_COUNT(value)) {
+ DRM_ERROR("Downstream disconnected\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int anx6345_probe_edid_from_of(struct anx6345 *anx6345)
+{
+ const u8 *edidp;
+ int len;
+
+ if (!anx6345->bridge.of_node)
+ return -ENODEV;
+
+ edidp = of_get_property(anx6345->bridge.of_node, "edid", &len);
+ if (!edidp || len != EDID_LENGTH)
+ return -EINVAL;
+
+ anx6345->edid = devm_kmemdup(&anx6345->client->dev, edidp,
+ len, GFP_KERNEL);
+
+ if (!anx6345->edid)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int anx6345_get_modes(struct drm_connector *connector)
+{
+ struct anx6345 *anx6345 = connector_to_anx6345(connector);
+ int err, num_modes = 0;
+
+ if (WARN_ON(!anx6345->powered))
+ return 0;
+
+ if (anx6345->edid)
+ return drm_add_edid_modes(connector, anx6345->edid);
+
+ mutex_lock(&anx6345->lock);
+
+ err = anx6345_get_downstream_info(anx6345);
+ if (err) {
+ DRM_ERROR("Failed to get downstream info: %d\n", err);
+ goto unlock;
+ }
+
+ anx6345->edid = drm_get_edid(connector, &anx6345->aux.ddc);
+ if (!anx6345->edid)
+ DRM_ERROR("Failed to read EDID from panel\n");
+
+ if (!anx6345->edid) {
+ err = anx6345_probe_edid_from_of(anx6345);
+ if (err) {
+ DRM_ERROR("Failed to probe EDID from device tree\n");
+ goto unlock;
+ }
+ }
+
+ err = drm_connector_update_edid_property(connector,
+ anx6345->edid);
+ if (err) {
+ DRM_ERROR("Failed to update EDID property: %d\n", err);
+ goto unlock;
+ }
+
+ num_modes = drm_add_edid_modes(connector, anx6345->edid);
+
+unlock:
+ mutex_unlock(&anx6345->lock);
+
+ return num_modes;
+}
+
+static const struct drm_connector_helper_funcs anx6345_connector_helper_funcs = {
+ .get_modes = anx6345_get_modes,
+};
+
+static enum drm_connector_status anx6345_detect(struct drm_connector *connector,
+ bool force)
+{
+ return connector_status_connected;
+}
+
+static const struct drm_connector_funcs anx6345_connector_funcs = {
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = anx6345_detect,
+ .destroy = drm_connector_cleanup,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int anx6345_bridge_attach(struct drm_bridge *bridge)
+{
+ struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
+ int err;
+
+ if (!bridge->encoder) {
+ DRM_ERROR("Parent encoder object not found");
+ return -ENODEV;
+ }
+
+ /* Register aux channel */
+ anx6345->aux.name = "DP-AUX";
+ anx6345->aux.dev = &anx6345->client->dev;
+ anx6345->aux.transfer = anx6345_aux_transfer;
+
+ err = drm_dp_aux_register(&anx6345->aux);
+ if (err < 0) {
+ DRM_ERROR("Failed to register aux channel: %d\n", err);
+ return err;
+ }
+
+ err = drm_connector_init(bridge->dev, &anx6345->connector,
+ &anx6345_connector_funcs,
+ DRM_MODE_CONNECTOR_eDP);
+ if (err) {
+ DRM_ERROR("Failed to initialize connector: %d\n", err);
+ return err;
+ }
+
+ drm_connector_helper_add(&anx6345->connector,
+ &anx6345_connector_helper_funcs);
+
+ err = drm_connector_register(&anx6345->connector);
+ if (err) {
+ DRM_ERROR("Failed to register connector: %d\n", err);
+ return err;
+ }
+
+ anx6345->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+ err = drm_connector_attach_encoder(&anx6345->connector,
+ bridge->encoder);
+ if (err) {
+ DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static bool anx6345_bridge_mode_fixup(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ return false;
+
+ /* Max 1200p at 5.4 Ghz, one lane */
+ if (mode->clock > 154000)
+ return false;
+
+ return true;
+}
+
+static void anx6345_bridge_disable(struct drm_bridge *bridge)
+{
+ struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
+
+ /* Power off all modules except configuration registers access */
+ anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
+ SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+}
+
+static void anx6345_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
+
+ if (WARN_ON(!anx6345->powered))
+ return;
+}
+
+static void anx6345_bridge_enable(struct drm_bridge *bridge)
+{
+ struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
+ int err;
+
+ err = anx6345_start(anx6345);
+ if (err) {
+ DRM_ERROR("Failed to initialize: %d\n", err);
+ return;
+ }
+
+ err = anx6345_config_dp_output(anx6345);
+ if (err)
+ DRM_ERROR("Failed to enable DP output: %d\n", err);
+}
+
+static const struct drm_bridge_funcs anx6345_bridge_funcs = {
+ .attach = anx6345_bridge_attach,
+ .mode_fixup = anx6345_bridge_mode_fixup,
+ .disable = anx6345_bridge_disable,
+ .mode_set = anx6345_bridge_mode_set,
+ .enable = anx6345_bridge_enable,
+};
+
+static void unregister_i2c_dummy_clients(struct anx6345 *anx6345)
+{
+ unsigned int i;
+
+ for (i = 1; i < ARRAY_SIZE(anx6345->i2c_clients); i++)
+ if (anx6345->i2c_clients[i] &&
+ anx6345->i2c_clients[i]->addr != anx6345->client->addr)
+ i2c_unregister_device(anx6345->i2c_clients[i]);
+}
+
+static const struct regmap_config anx6345_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0xff,
+};
+
+static const u16 anx6345_chipid_list[] = {
+ 0x6345,
+};
+
+static int anx6345_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct anx6345 *anx6345;
+ struct anx6345_platform_data *pdata;
+ unsigned int i, idl, idh, version;
+ bool found = false;
+ int err;
+
+ anx6345 = devm_kzalloc(&client->dev, sizeof(*anx6345), GFP_KERNEL);
+ if (!anx6345)
+ return -ENOMEM;
+
+ pdata = &anx6345->pdata;
+
+ mutex_init(&anx6345->lock);
+
+#if IS_ENABLED(CONFIG_OF)
+ anx6345->bridge.of_node = client->dev.of_node;
+#endif
+
+ anx6345->client = client;
+ i2c_set_clientdata(client, anx6345);
+
+ err = anx6345_init_pdata(anx6345);
+ if (err) {
+ DRM_ERROR("Failed to initialize pdata: %d\n", err);
+ return err;
+ }
+
+ /* Map slave addresses of ANX6345 */
+ for (i = 0; i < I2C_NUM_ADDRESSES; i++) {
+ if (anx6345_i2c_addresses[i] >> 1 != client->addr)
+ anx6345->i2c_clients[i] = i2c_new_dummy(client->adapter,
+ anx6345_i2c_addresses[i] >> 1);
+ else
+ anx6345->i2c_clients[i] = client;
+
+ if (!anx6345->i2c_clients[i]) {
+ err = -ENOMEM;
+ DRM_ERROR("Failed to reserve I2C bus %02x\n",
+ anx6345_i2c_addresses[i]);
+ goto err_unregister_i2c;
+ }
+
+ anx6345->map[i] = devm_regmap_init_i2c(anx6345->i2c_clients[i],
+ &anx6345_regmap_config);
+ if (IS_ERR(anx6345->map[i])) {
+ err = PTR_ERR(anx6345->map[i]);
+ DRM_ERROR("Failed regmap initialization %02x\n",
+ anx6345_i2c_addresses[i]);
+ goto err_unregister_i2c;
+ }
+ }
+
+ /* Look for supported chip ID */
+ anx6345_poweron(anx6345);
+
+ err = regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_IDL_REG,
+ &idl);
+ if (err)
+ goto err_poweroff;
+
+ err = regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_IDH_REG,
+ &idh);
+ if (err)
+ goto err_poweroff;
+
+ anx6345->chipid = (u8)idl | ((u8)idh << 8);
+
+ err = regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_VERSION_REG,
+ &version);
+ if (err)
+ goto err_poweroff;
+
+ for (i = 0; i < ARRAY_SIZE(anx6345_chipid_list); i++) {
+ if (anx6345->chipid == anx6345_chipid_list[i]) {
+ DRM_INFO("Found ANX%x (ver. %d) eDP Transmitter\n",
+ anx6345->chipid, version);
+ found = true;
+ break;
+ }
+ }
+
+ if (!found) {
+ DRM_ERROR("ANX%x (ver. %d) not supported by this driver\n",
+ anx6345->chipid, version);
+ err = -ENODEV;
+ goto err_poweroff;
+ }
+
+ anx6345->bridge.funcs = &anx6345_bridge_funcs;
+
+ drm_bridge_add(&anx6345->bridge);
+
+ return 0;
+
+err_poweroff:
+ anx6345_poweroff(anx6345);
+
+err_unregister_i2c:
+ unregister_i2c_dummy_clients(anx6345);
+ return err;
+}
+
+static int anx6345_i2c_remove(struct i2c_client *client)
+{
+ struct anx6345 *anx6345 = i2c_get_clientdata(client);
+
+ drm_bridge_remove(&anx6345->bridge);
+
+ unregister_i2c_dummy_clients(anx6345);
+
+ kfree(anx6345->edid);
+
+ return 0;
+}
+
+static const struct i2c_device_id anx6345_id[] = {
+ { "anx6345", 0 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, anx6345_id);
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id anx6345_match_table[] = {
+ { .compatible = "analogix,anx6345", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, anx6345_match_table);
+#endif
+
+static struct i2c_driver anx6345_driver = {
+ .driver = {
+ .name = "anx6345",
+ .of_match_table = of_match_ptr(anx6345_match_table),
+ },
+ .probe = anx6345_i2c_probe,
+ .remove = anx6345_i2c_remove,
+ .id_table = anx6345_id,
+};
+module_i2c_driver(anx6345_driver);
+
+MODULE_DESCRIPTION("ANX6345 eDP Transmitter driver");
+MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
+MODULE_LICENSE("GPL v2");
@@ -117,7 +117,7 @@ ssize_t anx_aux_transfer(struct regmap *map_dptx, struct drm_dp_aux_msg *msg)
else /* For non-zero-sized set the length field. */
ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
- if ((msg->request & DP_AUX_I2C_READ) == 0) {
+ if ((msg->size > 0) && ((msg->request & DP_AUX_I2C_READ) == 0)) {
/* When WRITE | MOT write values to data buffer */
err = regmap_bulk_write(map_dptx,
SP_DP_BUF_DATA0_REG, buffer,
@@ -75,7 +75,11 @@
#define SP_CHA_STA BIT(2)
/* Bits for DP System Control Register 3 */
#define SP_HPD_STATUS BIT(6)
+#define SP_HPD_FORCE BIT(5)
+#define SP_HPD_CTRL BIT(4)
#define SP_STRM_VALID BIT(2)
+#define SP_STRM_FORCE BIT(1)
+#define SP_STRM_CTRL BIT(0)
/* Bits for DP System Control Register 4 */
#define SP_ENHANCED_MODE BIT(3)
@@ -120,6 +124,9 @@
#define SP_LINK_BW_SET_MASK 0x1f
#define SP_INITIAL_SLIM_M_AUD_SEL BIT(5)
+/* DP Lane Count Setting Register */
+#define SP_DP_LANE_COUNT_SET_REG 0xa1
+
/* DP Training Pattern Set Register */
#define SP_DP_TRAINING_PATTERN_SET_REG 0xa2
@@ -133,6 +140,7 @@
/* DP Link Training Control Register */
#define SP_DP_LT_CTRL_REG 0xa8
+#define SP_DP_LT_INPROGRESS 0x80
#define SP_LT_ERROR_TYPE_MASK 0x70
# define SP_LT_NO_ERROR 0x00
# define SP_LT_AUX_WRITE_ERROR 0x01
@@ -183,6 +183,9 @@
#define SP_VBIT BIT(1)
#define SP_AUDIO_LAYOUT BIT(0)
+/* Analog Debug Register 1 */
+#define SP_ANALOG_DEBUG1_REG 0xdc
+
/* Analog Debug Register 2 */
#define SP_ANALOG_DEBUG2_REG 0xdd
#define SP_FORCE_SW_OFF_BYPASS 0x20
The ANX6345 is an ultra-low power DisplayPower/eDP transmitter designed for portable devices. This driver adds initial support for RGB to eDP mode, without HPD and interrupts, but with possibility to inject EDID. This is a configuration usually seen in eDP applications. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- drivers/gpu/drm/bridge/analogix/Kconfig | 11 + drivers/gpu/drm/bridge/analogix/Makefile | 1 + .../drm/bridge/analogix/analogix-anx6345.c | 862 ++++++++++++++++++ .../drm/bridge/analogix/analogix-i2c-dptx.c | 2 +- .../drm/bridge/analogix/analogix-i2c-dptx.h | 8 + .../bridge/analogix/analogix-i2c-txcommon.h | 3 + 6 files changed, 886 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-anx6345.c