diff mbox series

[v2,2/3] drm/vc4: Report underrun errors

Message ID 20181025124546.22145-3-boris.brezillon@bootlin.com (mailing list archive)
State New, archived
Headers show
Series drm/vc4: Add a load tracker | expand

Commit Message

Boris Brezillon Oct. 25, 2018, 12:45 p.m. UTC
The DRM framework provides a generic way to report underrun errors.
Let's implement the necessary hooks to support it in the VC4 driver.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changes in v2:
- New patch
---
 drivers/gpu/drm/vc4/vc4_drv.h  |  3 ++
 drivers/gpu/drm/vc4/vc4_hvs.c  | 71 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/vc4/vc4_kms.c  |  7 ++++
 drivers/gpu/drm/vc4/vc4_regs.h | 46 ++++++----------------
 4 files changed, 92 insertions(+), 35 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index bd6ef1f31822..a6c67c65ffbc 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -763,6 +763,9 @@  void vc4_irq_reset(struct drm_device *dev);
 extern struct platform_driver vc4_hvs_driver;
 void vc4_hvs_dump_state(struct drm_device *dev);
 int vc4_hvs_debugfs_regs(struct seq_file *m, void *unused);
+void vc4_hvs_unmask_underrun(struct drm_device *dev);
+void vc4_hvs_mask_underrun(struct drm_device *dev);
+void vc4_hvs_clear_underrun(struct drm_device *dev);
 
 /* vc4_kms.c */
 int vc4_kms_load(struct drm_device *dev);
diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index 5d8c749c9749..12ff95ff1d29 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -22,6 +22,7 @@ 
  * each CRTC.
  */
 
+#include <drm/drm_atomic_helper.h>
 #include <linux/component.h>
 #include "vc4_drv.h"
 #include "vc4_regs.h"
@@ -166,6 +167,58 @@  static int vc4_hvs_upload_linear_kernel(struct vc4_hvs *hvs,
 	return 0;
 }
 
+static irqreturn_t vc4_hvs_irq_handler(int irq, void *data)
+{
+	struct drm_device *dev = data;
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	u32 status;
+
+	status = HVS_READ(SCALER_DISPSTAT);
+
+	if (status &
+	    (SCALER_DISPSTAT_EUFLOW(0) | SCALER_DISPSTAT_EUFLOW(1) |
+	     SCALER_DISPSTAT_EUFLOW(2)))
+		drm_atomic_helper_underrun_set(dev);
+
+	HVS_WRITE(SCALER_DISPSTAT, status);
+
+	return status ? IRQ_HANDLED : IRQ_NONE;
+}
+
+void vc4_hvs_mask_underrun(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	u32 dispctrl = HVS_READ(SCALER_DISPCTRL);
+
+	dispctrl &= ~(SCALER_DISPCTRL_DSPEISLUR(0) |
+		      SCALER_DISPCTRL_DSPEISLUR(1) |
+		      SCALER_DISPCTRL_DSPEISLUR(2));
+
+	HVS_WRITE(SCALER_DISPCTRL, dispctrl);
+}
+
+void vc4_hvs_clear_underrun(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+	HVS_WRITE(SCALER_DISPSTAT,
+		  SCALER_DISPSTAT_EUFLOW(0) |
+		  SCALER_DISPSTAT_EUFLOW(1) |
+		  SCALER_DISPSTAT_EUFLOW(2));
+}
+
+void vc4_hvs_unmask_underrun(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	u32 dispctrl = HVS_READ(SCALER_DISPCTRL);
+
+	dispctrl |= SCALER_DISPCTRL_DSPEISLUR(0) |
+		    SCALER_DISPCTRL_DSPEISLUR(1) |
+		    SCALER_DISPCTRL_DSPEISLUR(2);
+
+	HVS_WRITE(SCALER_DISPCTRL, dispctrl);
+}
+
 static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -219,15 +272,33 @@  static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
 	dispctrl = HVS_READ(SCALER_DISPCTRL);
 
 	dispctrl |= SCALER_DISPCTRL_ENABLE;
+	dispctrl |= SCALER_DISPCTRL_DSPEISLUR(0) | SCALER_DISPCTRL_DISPEIRQ(0) |
+		    SCALER_DISPCTRL_DSPEISLUR(1) | SCALER_DISPCTRL_DISPEIRQ(1) |
+		    SCALER_DISPCTRL_DSPEISLUR(2) | SCALER_DISPCTRL_DISPEIRQ(2);
 
 	/* Set DSP3 (PV1) to use HVS channel 2, which would otherwise
 	 * be unused.
 	 */
 	dispctrl &= ~SCALER_DISPCTRL_DSP3_MUX_MASK;
+	dispctrl &= ~(SCALER_DISPCTRL_DMAEIRQ |
+		      SCALER_DISPCTRL_SLVWREIRQ |
+		      SCALER_DISPCTRL_SLVRDEIRQ |
+		      SCALER_DISPCTRL_DSPEIEOF(0) |
+		      SCALER_DISPCTRL_DSPEIEOF(1) |
+		      SCALER_DISPCTRL_DSPEIEOF(2) |
+		      SCALER_DISPCTRL_DSPEIEOLN(0) |
+		      SCALER_DISPCTRL_DSPEIEOLN(1) |
+		      SCALER_DISPCTRL_DSPEIEOLN(2) |
+		      SCALER_DISPCTRL_SCLEIRQ);
 	dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_DSP3_MUX);
 
 	HVS_WRITE(SCALER_DISPCTRL, dispctrl);
 
+	ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
+			       vc4_hvs_irq_handler, 0, "vc4 hvs", drm);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
index 5c9823ccb3f8..8e0183b1e8bb 100644
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -139,6 +139,8 @@  vc4_atomic_complete_commit(struct drm_atomic_state *state)
 	struct drm_device *dev = state->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 
+	drm_atomic_helper_underrun_stop(dev);
+
 	drm_atomic_helper_wait_for_fences(dev, state, false);
 
 	drm_atomic_helper_wait_for_dependencies(state);
@@ -155,6 +157,8 @@  vc4_atomic_complete_commit(struct drm_atomic_state *state)
 
 	drm_atomic_helper_commit_hw_done(state);
 
+	drm_atomic_helper_underrun_start(dev);
+
 	drm_atomic_helper_wait_for_flip_done(dev, state);
 
 	drm_atomic_helper_cleanup_planes(dev, state);
@@ -395,6 +399,9 @@  static const struct drm_mode_config_funcs vc4_mode_funcs = {
 	.atomic_check = vc4_atomic_check,
 	.atomic_commit = vc4_atomic_commit,
 	.fb_create = vc4_fb_create,
+	.atomic_mask_underrun = vc4_hvs_mask_underrun,
+	.atomic_unmask_underrun = vc4_hvs_unmask_underrun,
+	.atomic_clear_underrun = vc4_hvs_clear_underrun,
 };
 
 int vc4_kms_load(struct drm_device *dev)
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 931088014272..7067c62b09e8 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -215,8 +215,6 @@ 
 #define SCALER_DISPCTRL                         0x00000000
 /* Global register for clock gating the HVS */
 # define SCALER_DISPCTRL_ENABLE			BIT(31)
-# define SCALER_DISPCTRL_DSP2EISLUR		BIT(15)
-# define SCALER_DISPCTRL_DSP1EISLUR		BIT(14)
 # define SCALER_DISPCTRL_DSP3_MUX_MASK		VC4_MASK(19, 18)
 # define SCALER_DISPCTRL_DSP3_MUX_SHIFT		18
 
@@ -224,45 +222,25 @@ 
  * SCALER_DISPSTAT_IRQDISP0.  Note that short frame contributions are
  * always enabled.
  */
-# define SCALER_DISPCTRL_DSP0EISLUR		BIT(13)
-# define SCALER_DISPCTRL_DSP2EIEOLN		BIT(12)
-# define SCALER_DISPCTRL_DSP2EIEOF		BIT(11)
-# define SCALER_DISPCTRL_DSP1EIEOLN		BIT(10)
-# define SCALER_DISPCTRL_DSP1EIEOF		BIT(9)
+# define SCALER_DISPCTRL_DSPEISLUR(x)		BIT(13 + (x))
 /* Enables Display 0 end-of-line-N contribution to
  * SCALER_DISPSTAT_IRQDISP0
  */
-# define SCALER_DISPCTRL_DSP0EIEOLN		BIT(8)
+# define SCALER_DISPCTRL_DSPEIEOLN(x)		BIT(8 + ((x) * 2))
 /* Enables Display 0 EOF contribution to SCALER_DISPSTAT_IRQDISP0 */
-# define SCALER_DISPCTRL_DSP0EIEOF		BIT(7)
+# define SCALER_DISPCTRL_DSPEIEOF(x)		BIT(7 + ((x) * 2))
 
 # define SCALER_DISPCTRL_SLVRDEIRQ		BIT(6)
 # define SCALER_DISPCTRL_SLVWREIRQ		BIT(5)
 # define SCALER_DISPCTRL_DMAEIRQ		BIT(4)
-# define SCALER_DISPCTRL_DISP2EIRQ		BIT(3)
-# define SCALER_DISPCTRL_DISP1EIRQ		BIT(2)
 /* Enables interrupt generation on the enabled EOF/EOLN/EISLUR
  * bits and short frames..
  */
-# define SCALER_DISPCTRL_DISP0EIRQ		BIT(1)
+# define SCALER_DISPCTRL_DISPEIRQ(x)		BIT(1 + (x))
 /* Enables interrupt generation on scaler profiler interrupt. */
 # define SCALER_DISPCTRL_SCLEIRQ		BIT(0)
 
 #define SCALER_DISPSTAT                         0x00000004
-# define SCALER_DISPSTAT_COBLOW2		BIT(29)
-# define SCALER_DISPSTAT_EOLN2			BIT(28)
-# define SCALER_DISPSTAT_ESFRAME2		BIT(27)
-# define SCALER_DISPSTAT_ESLINE2		BIT(26)
-# define SCALER_DISPSTAT_EUFLOW2		BIT(25)
-# define SCALER_DISPSTAT_EOF2			BIT(24)
-
-# define SCALER_DISPSTAT_COBLOW1		BIT(21)
-# define SCALER_DISPSTAT_EOLN1			BIT(20)
-# define SCALER_DISPSTAT_ESFRAME1		BIT(19)
-# define SCALER_DISPSTAT_ESLINE1		BIT(18)
-# define SCALER_DISPSTAT_EUFLOW1		BIT(17)
-# define SCALER_DISPSTAT_EOF1			BIT(16)
-
 # define SCALER_DISPSTAT_RESP_MASK		VC4_MASK(15, 14)
 # define SCALER_DISPSTAT_RESP_SHIFT		14
 # define SCALER_DISPSTAT_RESP_OKAY		0
@@ -270,23 +248,23 @@ 
 # define SCALER_DISPSTAT_RESP_SLVERR		2
 # define SCALER_DISPSTAT_RESP_DECERR		3
 
-# define SCALER_DISPSTAT_COBLOW0		BIT(13)
+# define SCALER_DISPSTAT_COBLOW(x)		BIT(5 + (((x) + 1) * 8))
 /* Set when the DISPEOLN line is done compositing. */
-# define SCALER_DISPSTAT_EOLN0			BIT(12)
+# define SCALER_DISPSTAT_EOLN(x)		BIT(4 + (((x) + 1) * 8))
 /* Set when VSTART is seen but there are still pixels in the current
  * output line.
  */
-# define SCALER_DISPSTAT_ESFRAME0		BIT(11)
+# define SCALER_DISPSTAT_ESFRAME(x)		BIT(3 + (((x) + 1) * 8))
 /* Set when HSTART is seen but there are still pixels in the current
  * output line.
  */
-# define SCALER_DISPSTAT_ESLINE0		BIT(10)
+# define SCALER_DISPSTAT_ESLINE(x)		BIT(2 + (((x) + 1) * 8))
 /* Set when the the downstream tries to read from the display FIFO
  * while it's empty.
  */
-# define SCALER_DISPSTAT_EUFLOW0		BIT(9)
+# define SCALER_DISPSTAT_EUFLOW(x)		BIT(1 + (((x) + 1) * 8))
 /* Set when the display mode changes from RUN to EOF */
-# define SCALER_DISPSTAT_EOF0			BIT(8)
+# define SCALER_DISPSTAT_EOF(x)			BIT(((x) + 1) * 8)
 
 /* Set on AXI invalid DMA ID error. */
 # define SCALER_DISPSTAT_DMA_ERROR		BIT(7)
@@ -298,12 +276,10 @@ 
  * SCALER_DISPSTAT_RESP_ERROR is not SCALER_DISPSTAT_RESP_OKAY.
  */
 # define SCALER_DISPSTAT_IRQDMA			BIT(4)
-# define SCALER_DISPSTAT_IRQDISP2		BIT(3)
-# define SCALER_DISPSTAT_IRQDISP1		BIT(2)
 /* Set when any of the EOF/EOLN/ESFRAME/ESLINE bits are set and their
  * corresponding interrupt bit is enabled in DISPCTRL.
  */
-# define SCALER_DISPSTAT_IRQDISP0		BIT(1)
+# define SCALER_DISPSTAT_IRQDISP(x)		BIT(1 + (x))
 /* On read, the profiler interrupt.  On write, clear *all* interrupt bits. */
 # define SCALER_DISPSTAT_IRQSCL			BIT(0)