@@ -25,4 +25,21 @@
num_tries; \
})
+/* the restriction of range is [start, end] */
+struct malidp_range {
+ u32 start;
+ u32 end;
+};
+
+static inline void set_range(struct malidp_range *rg, u32 start, u32 end)
+{
+ rg->start = start;
+ rg->end = end;
+}
+
+static inline bool in_range(struct malidp_range *rg, u32 v)
+{
+ return (v >= rg->start) && (v <= rg->end);
+}
+
#endif /* _MALIDP_UTILS_ */
@@ -7,11 +7,171 @@
#include "d71_dev.h"
#include "komeda_kms.h"
#include "malidp_io.h"
+#include "komeda_framebuffer.h"
+
+static void get_resources_id(u32 hw_id, u32 *pipe_id, u32 *comp_id)
+{
+ u32 id = BLOCK_INFO_BLK_ID(hw_id);
+ u32 pipe = id;
+
+ switch (BLOCK_INFO_BLK_TYPE(hw_id)) {
+ case D71_BLK_TYPE_LPU_WB_LAYER:
+ id = KOMEDA_COMPONENT_WB_LAYER;
+ break;
+ case D71_BLK_TYPE_CU_SPLITTER:
+ id = KOMEDA_COMPONENT_SPLITTER;
+ break;
+ case D71_BLK_TYPE_CU_SCALER:
+ pipe = id / D71_PIPELINE_MAX_SCALERS;
+ id %= D71_PIPELINE_MAX_SCALERS;
+ id += KOMEDA_COMPONENT_SCALER0;
+ break;
+ case D71_BLK_TYPE_CU:
+ id += KOMEDA_COMPONENT_COMPIZ0;
+ break;
+ case D71_BLK_TYPE_LPU_LAYER:
+ pipe = id / D71_PIPELINE_MAX_LAYERS;
+ id %= D71_PIPELINE_MAX_LAYERS;
+ id += KOMEDA_COMPONENT_LAYER0;
+ break;
+ case D71_BLK_TYPE_DOU_IPS:
+ id += KOMEDA_COMPONENT_IPS0;
+ break;
+ case D71_BLK_TYPE_CU_MERGER:
+ id = KOMEDA_COMPONENT_MERGER;
+ break;
+ case D71_BLK_TYPE_DOU:
+ id = KOMEDA_COMPONENT_TIMING_CTRLR;
+ break;
+ default:
+ id = 0xFFFFFFFF;
+ }
+
+ if (comp_id)
+ *comp_id = id;
+
+ if (pipe_id)
+ *pipe_id = pipe;
+}
+
+static u32 get_valid_inputs(struct block_header *blk)
+{
+ u32 valid_inputs = 0, comp_id;
+ int i;
+
+ for (i = 0; i < PIPELINE_INFO_N_VALID_INPUTS(blk->pipeline_info); i++) {
+ get_resources_id(blk->input_ids[i], NULL, &comp_id);
+ if (comp_id == 0xFFFFFFFF)
+ continue;
+ valid_inputs |= BIT(comp_id);
+ }
+
+ return valid_inputs;
+}
+
+static u32 to_rot_ctrl(u32 rot)
+{
+ u32 lr_ctrl = 0;
+
+ switch (rot & DRM_MODE_ROTATE_MASK) {
+ case DRM_MODE_ROTATE_0:
+ lr_ctrl |= L_ROT(L_ROT_R0);
+ break;
+ case DRM_MODE_ROTATE_90:
+ lr_ctrl |= L_ROT(L_ROT_R90);
+ break;
+ case DRM_MODE_ROTATE_180:
+ lr_ctrl |= L_ROT(L_ROT_R180);
+ break;
+ case DRM_MODE_ROTATE_270:
+ lr_ctrl |= L_ROT(L_ROT_R270);
+ break;
+ }
+
+ if (rot & DRM_MODE_REFLECT_X)
+ lr_ctrl |= L_HFLIP;
+ if (rot & DRM_MODE_REFLECT_Y)
+ lr_ctrl |= L_VFLIP;
+
+ return lr_ctrl;
+}
+
+static void d71_layer_disable(struct komeda_component *c)
+{
+ malidp_write32_mask(c->reg, BLK_CONTROL, L_EN, 0);
+}
+
+static void d71_layer_update(struct komeda_component *c,
+ struct komeda_component_state *state)
+{
+ struct komeda_layer_state *st = to_layer_st(state);
+ struct drm_plane_state *plane_st = state->plane->state;
+ struct drm_framebuffer *fb = plane_st->fb;
+ struct komeda_fb *kfb = to_kfb(fb);
+ u32 __iomem *reg = c->reg;
+ u32 ctrl_mask = L_EN | L_ROT(L_ROT_R270) | L_HFLIP | L_VFLIP | L_TBU_EN;
+ u32 ctrl = L_EN | to_rot_ctrl(st->rot);
+ int i;
+
+ for (i = 0; i < fb->format->num_planes; i++) {
+ malidp_write32(reg,
+ BLK_P0_PTR_LOW + i * LAYER_PER_PLANE_REGS * 4,
+ lower_32_bits(st->addr[i]));
+ malidp_write32(reg,
+ BLK_P0_PTR_HIGH + i * LAYER_PER_PLANE_REGS * 4,
+ upper_32_bits(st->addr[i]));
+ if (i >= 2)
+ break;
+
+ malidp_write32(reg,
+ BLK_P0_STRIDE + i * LAYER_PER_PLANE_REGS * 4,
+ fb->pitches[i] & 0xFFFF);
+ }
+
+ malidp_write32(reg, LAYER_FMT, kfb->format_caps->hw_id);
+ malidp_write32(reg, BLK_IN_SIZE, HV_SIZE(st->hsize, st->vsize));
+
+ malidp_write32_mask(reg, BLK_CONTROL, ctrl_mask, ctrl);
+}
+
+struct komeda_component_funcs d71_layer_funcs = {
+ .update = d71_layer_update,
+ .disable = d71_layer_disable,
+};
static int d71_layer_init(struct d71_dev *d71,
struct block_header *blk, u32 __iomem *reg)
{
- DRM_INFO("Detect D71_Layer.\n");
+ struct komeda_component *c;
+ struct komeda_layer *layer;
+ u32 pipe_id, layer_id, layer_info;
+
+ get_resources_id(blk->block_info, &pipe_id, &layer_id);
+ c = komeda_component_add(&d71->pipes[pipe_id]->base, sizeof(*layer),
+ layer_id,
+ BLOCK_INFO_INPUT_ID(blk->block_info),
+ &d71_layer_funcs, 0,
+ get_valid_inputs(blk),
+ 1, reg, "LPU%d_LAYER%d", pipe_id, layer_id);
+ if (!c) {
+ DRM_ERROR("Failed to add layer component\n");
+ return -EINVAL;
+ }
+
+ layer = to_layer(c);
+ layer_info = malidp_read32(reg, LAYER_INFO);
+
+ if (layer_info & L_INFO_RF)
+ layer->layer_type = KOMEDA_FMT_RICH_LAYER;
+ else
+ layer->layer_type = KOMEDA_FMT_SIMPLE_LAYER;
+
+ set_range(&layer->hsize_in, 4, d71->max_line_size);
+ set_range(&layer->vsize_in, 4, d71->max_vsize);
+
+ malidp_write32(reg, LAYER_PALPHA, D71_PALPHA_DEF_MAP);
+
+ layer->supported_rots = DRM_MODE_ROTATE_MASK | DRM_MODE_REFLECT_MASK;
return 0;
}
@@ -146,7 +146,7 @@ komeda_component_add(struct komeda_pipeline *pipe,
}
pos = komeda_pipeline_get_component_pos(pipe, id);
- if (!pos || !(*pos))
+ if (!pos || (*pos))
return NULL;
if (has_bit(id, KOMEDA_PIPELINE_LAYERS)) {
@@ -209,16 +209,20 @@ static inline u16 component_changed_inputs(struct komeda_component_state *st)
#define to_comp(__c) (((__c) == NULL) ? NULL : &((__c)->base))
#define to_cpos(__c) ((struct komeda_component **)&(__c))
-/* these structures are going to be filled in in uture patches */
struct komeda_layer {
struct komeda_component base;
- /* layer specific features and caps */
- int layer_type; /* RICH, SIMPLE or WB */
+ /* accepted h/v input range before rotation */
+ struct malidp_range hsize_in, vsize_in;
+ u32 layer_type; /* RICH, SIMPLE or WB */
+ u32 supported_rots;
};
struct komeda_layer_state {
struct komeda_component_state base;
/* layer specific configuration state */
+ u16 hsize, vsize;
+ u32 rot;
+ dma_addr_t addr[3];
};
struct komeda_compiz {
1. Add detailed layer/layer_state definitions 2. Add d71_layer_init to report layer features and capabilities according to D71 layer block. 3. Add d71_layer_updat/disable Signed-off-by: James (Qian) Wang <james.qian.wang@arm.com> --- .../drm/arm/display/include/malidp_utils.h | 17 ++ .../arm/display/komeda/d71/d71_component.c | 162 +++++++++++++++++- .../drm/arm/display/komeda/komeda_pipeline.c | 2 +- .../drm/arm/display/komeda/komeda_pipeline.h | 10 +- 4 files changed, 186 insertions(+), 5 deletions(-)